Description : Define the term interpolation of contours.
Last Answer : Interpolation of contours is the process of locating the required contours proportionately between the plotted reduced levels on sheet.
Description : The plotting of inaccessible points in a plane-table survey can be done by the method of (a) Interpolation (b) Radiation (c) Intersection (d) Traversing
Last Answer : (c) Intersection
Description : Select the correct statement. . A) Contour interval on any map is kept constant. (B) Direct method of contouring is cheaper than indirect method. (C) Intervisibility of points on a contour map cannot be ascertained. (D) Slope of a hill cannot be determined with the help of contours.
Last Answer : (A) Contour interval on any map is kept constant.
Description : How is the line interpolation method better than circula interpolation method, parabolic interpolation method and spline curve interpolation method?
Last Answer : Interpolation https://en.wikipedia.org/wiki/Interpolation
Description : What is interpolation? Describe the Lagrangian Interpolation method.
Last Answer : Specify a spline curve by giving a set of coordinate positions, called control points, which indicates the general shape of the curve These, control points are then fitted with piecewise continuous parametric ... -point positions above the surface Lagrangian Interpolation Method :
Description : Increase in population of a rapidly growing city, may be estimated by (A) Arithmetical mean method (B) Geometrical method (C) Incremental increase method (D) Graphical comparison method
Last Answer : (B) Geometrical method
Description : The forces in the members of simple trusses, may be analysed by (A) Graphical method (B) Method of joints (C) Method of sections (D) All the above
Last Answer : (D) All the above
Description : Stress in members of statically determinate simple frames, can be determined by (A) Method of joints (B) Method of sections (C) Graphical solution (D) All the above
Description : For interpolation of satellite data used for monitoring dynamic changes that occurs on the earth surface, the most suitable orbit for the satellite is: (A) Circular orbit (B) Sun-synchronous orbit (C) Near polar orbit (D) None of these
Last Answer : Answer: Option B
Description : Evolutionary computation is A . Combining different types of method or information B. Approach to the design of learning algorithms that is structured along the lines of the theory of evolution. C. ... the knowledge of an expert formulated in terms of if-then rules. D . None of these
Last Answer : B. Approach to the design of learning algorithms that is structured along the lines of the theory of evolution.
Description : Which of these items are excluded in the computation of National Income under value added method? (a) Own acquired fixed assets by the Government enterprises, Govt. and household; (b) Production for self-consumption ; (c) Imputed rent for own occupied house ; (d) All the three
Last Answer : (d) All the three
Description : In long and short wall method of estimation, the length of long wall is the centre to centre distance between the walls and (A) Breadth of the wall (B) Half breadth of wall on each side (C) One fourth breadth of wall on each side (D) None of these
Last Answer : (B) Half breadth of wall on each side
Description : is a method of ploughing in which the soil broken and turn along the contours. a. Normal ploughing c. Contour ploughing b. Sub soil plough. d. Disc plough
Last Answer : Contour ploughing
Description : State the methods of locating contours and explain direct method.
Last Answer : Methods of locating contours :- 1) Direct method 2) Indirect method i) By cross section ii) By Squares (Block Contouring) iii) Tachometric Method Direct method of contouring:- In ... identical coloured pegs, we get the required contours on ground by this direct method of contouring.
Description : Describe the method of locating contours by square method.
Last Answer : 1) The method of square is indirect method of locating contours. 2) The method of squares is used where the area to be surveyed is small and not much undulating. 3) The area to be surveyed ... points are written on the respective corners. 6) The contours are then interpolated between them.
Description : Closed contours of decreasing values towards their centre, represent (A) A hill (B) A depression (C) A saddle or pass (D) A river bed
Last Answer : (B) A depression
Description : Profile levelling is usually done for determining (A) Contours of an area (B) Capacity of a reservoir (C) Elevations along a straight line (D) Boundaries of property
Last Answer : (C) Elevations along a straight line
Description : Contours of different elevations may cross each other only in the case of (A) An overhanging cliff (B) A vertical cliff (C) A saddle (D) An inclined plane
Last Answer : (A) An overhanging cliff
Description : The representation of general topography of a very flat terrain is possible only (A) By drawing contours at large interval (B) By drawing contours at small interval (C) By giving spot levels at large interval (D) By giving spot levels to salient features at close interval
Last Answer : (D) By giving spot levels to salient features at close interval
Description : Closed contours, with higher value inwards, represent a (A) Depression (B) Hillock (C) Plain surface (D) None of the above
Last Answer : (B) Hillock
Description : Select the correct statement. (A) A contour is not necessarily a closed curve. B) A contour represents a ridge line if the concave side of lower value contour lies towards the higher value contour ... each other except in case of an overhanging cliff (D) All of the above statements are correct
Last Answer : (C) Two contours of different elevations do not cross each other except in case of an overhanging clif
Description : In case of a double line river, contours are (A) Stopped at the banks of the river (B) Stopped at the edge of the river (C) Drawn across the water (D) Drawn by parabolic curves having their vertex at the centre of the water
Last Answer : (B) Stopped at the edge of the river
Description : The constant vertical distance between two adjacent contours, is called (A) Horizontal interval (B) Horizontal equivalent (C) Vertical equivalent (D) Contour interval
Last Answer : (D) Contour interval
Description : Straight, parallel and widely spaced contours represent (A) A steep surface (B) A flat surface (C) An inclined plane surface (D) Curved surface
Last Answer : (C) An inclined plane surface
Description : Contour interval is (A) The vertical distance between two consecutive contours (B) The horizontal distance between two consecutive contours (C) The vertical distance between two points on same contour (D) The horizontal distance between two points on same contour
Last Answer : (A) The vertical distance between two consecutive contours
Description : Isopiestic lines are the contours (A) Drawn to represent water table (B) Drawn to represent piezometric heads (C) Drawn to piezometric surface (D) None of these
Last Answer : Answer: Option C
Description : On a hydrographic map, the following feature is shown: (A) High and low water lines (B) Depth contours (C) Land and water areas (D) All the above
Description : A closed contour line with two or more higher contours inside it will represent a (a) Depression (b) Hill (c) Cave (d) Well
Last Answer : (b) Hill
Description : When solving vector Addition problems you can use either the graphical method or the _.?
Last Answer : analytical method.
Description : Principal stresses are found by a. Analytical method b. Graphical method c. Analytical & graphical methods d. None
Last Answer : c. Analytical & graphical methods
Description : The graphical method of Mohr's circle represents shear stress (τ) on ______ a. X-axis b. Y-axis c. Z-axis d. None of the above
Last Answer : b. Y-axis
Description : 48. The graphical method of LP problem uses a. Objective function equation b. Constraint equations c. Linear equations d. All of the above
Last Answer : d. All of the above
Description : The graphical method if LPP uses: a. Linear equations b. Constraint equations c. Objective function d. All of the above
Description : What is meant by closing error? Explain graphical method of adjustment of closing error.
Last Answer : Closing error: The distance by which the traverse fails to close is called closing error. Step 1 ) Draw a horizontal line AA1 Equal to the length of perimeter of the traverse to a suitable scale 1) Mark ... 6) Join the the new points which gives the closed traversed. A, B, C,D and A.
Description : Incremental dimension in circular interpolation in X-axis is denoted by a.J b.I c.K d.None of the above
Last Answer : b.I
Description : G00 Preparatory code is used for a.Rapid Travel Execution b.Rapid Travel Positioning c.Rapid Travel sequencing d.Rapid clockwise interpolation
Last Answer : b.Rapid Travel Positioning
Description : In part programming, interpolation is used for obtaining trajectory. a.helicoidal b.pentagonal c.triangular d.zig-zag
Last Answer : a.helicoidal
Description : In a CNC program block, N02 GO2 G91 X40 Z40††, GO2 and G91 refer to a.circular interpolation in counter clockwise direction and incremental dimension b.circular ... in clockwise direction and incremental dimension d.circular interpolation in clockwise direction and absolute dimension
Last Answer : c.circular interpolation in clockwise direction and incremental dimension
Description : Match the following: NC code DefinitionP. M05 1. Absolute coordinate system Q. G01 2. Dwell R. G04 3. Spindle stop S. G09 4. Linear interpolation a.P-2, Q-3, R-4, S-1 b.P-3, Q-4, R-1, S-2 c.P-3, Q-4, R-2, S-1 d.P-4, Q-3, R-2, S-1
Last Answer : c.P-3, Q-4, R-2, S-1
Description : During the execution of a CNC part program block NO20 GO2 X45.0 Y25.0 R5.0the type of tool motion will be a.circular Interpolation – clockwise b.circular Interpolation – counter clockwise c.linear Interpolation d.rapid feed
Last Answer : a.circular Interpolation – clockwise
Description : State the methods of contour interpolation and explain in brief any one.
Last Answer : Methods of interpolation:- i) By Arithmetic calculations ii) By Estimation iii) By Graphical method i) By Arithmetic Calculation: This is very tedious but accurate method and is used for small areas ... in fig.) may now be pricked through the position of the contour points on line PQ.
Description : Define interpolation of contour and state its methods.
Last Answer : The process of spacing the contours proportionately between the ground points is known as “Interpolation of Contours”. The contours may be interpolated by: 1. Estimation 2. Arithmetical calculations. 3. Graphical method.
Description : What is interpolation? State its types. Explain linear interpolation with neat sketch
Last Answer : Definition : When the feed rates of individual axis are not constant and they vary continuously through the move it is called interpolation. Following are the types of interpolation: 1. G00- Rapid Traverse 2. ... to clear the job for loading /Unloading N9 M02 EOB Programme End.
Description : Explain interpolation techniques in curve generation.
Last Answer : Specify a spline curve by giving a set of coordinate positions, called control points, which indicates the general shape of the curve These, control points are then fitted with piecewise continuous ... a design application. Straight lines connect the control -point positions above the surface.
Description : Which of the following statement(s) is/are correct with reference to curve generation? I. Hermite curves are generated using the concepts of interpolation. II. Bezier curves are generated using the concepts of approximation. III. The ... (B) II and III only (C) I and II only (D) I, II and III only
Last Answer : (D) I, II and III only
Description : Bowditch rule is applied to (A) An open traverse for graphical adjustment (B) A closed traverse for adjustment of closing error (C) Determine the effect of local attraction (D) None of the above
Last Answer : (B) A closed traverse for adjustment of closing error
Description : Pick up the correct statement from the following: (A) A graphical representation of spectral reflectance verses the various growth stages of a crop, depicts a phonologic pattern B) The changes in ... characteristic of the object which helps in the identification of the object (D) All of these
Last Answer : Answer: Option D
Description : Hydrograph is a graphical representation of (A) Surface run off (B) Ground water flow (C) Rain fall (D) Discharge flowing in the river
Description : A hyetograph is a graphical representation of (A) Rainfall intensity and time (B) Rainfall depth and time (C) Discharge and time (D) Cumulative rainfall and time
Last Answer : Answer: Option A
Description : The flow-mass curve is graphical representation of (A) Cumulative discharge and time (B) Discharge and percentage probability of flow being equalled or exceeded (C) Cumulative discharge, volume and time in chronological order (D) Discharge and time in chronological order