Closed contours of decreasing values towards their centre, represent (A) A hill (B) A depression (C) A saddle or pass (D) A river bed

Closed contours of decreasing values towards their centre, represent 

(A) A hill 

(B) A depression 

(C) A saddle or pass 

(D) A river bed

by

1 Answer

Answer :

(B) A depression 

by

Related questions

A closed contour line with two or more higher contours inside it will represent a (a) Depression (b) Hill (c) Cave (d) Well

Description : A closed contour line with two or more higher contours inside it will represent a (a) Depression (b) Hill (c) Cave (d) Well

Last Answer : (b) Hill

Closed contours, with higher value inwards, represent a (A) Depression (B) Hillock (C) Plain surface(D) None of the above

Description : Closed contours, with higher value inwards, represent a (A) Depression (B) Hillock (C) Plain surface (D) None of the above

Last Answer : (B) Hillock

Select the correct statement. (A) A contour is not necessarily a closed curve. B) A contour represents a ridge line if the concave side of lower value contour lies towards the higher value contour (C) Two contours of different elevations do not cross each other except in case of an overhanging cliff (D) All of the above statements are correct

Description : Select the correct statement. (A) A contour is not necessarily a closed curve. B) A contour represents a ridge line if the concave side of lower value contour lies towards the higher value contour ... each other except in case of an overhanging cliff (D) All of the above statements are correct

Last Answer : (C) Two contours of different elevations do not cross each other except in case of an overhanging clif

Contours of different elevations may cross each other only in the case of (A) An overhanging cliff (B) A vertical cliff (C) A saddle (D) An inclined plane

Description : Contours of different elevations may cross each other only in the case of (A) An overhanging cliff (B) A vertical cliff (C) A saddle (D) An inclined plane

Last Answer : (A) An overhanging cliff

In case of a double line river, contours are (A) Stopped at the banks of the river (B) Stopped at the edge of the river (C) Drawn across the water (D) Drawn by parabolic curves having their vertex at the centre of the water

Description : In case of a double line river, contours are (A) Stopped at the banks of the river (B) Stopped at the edge of the river (C) Drawn across the water (D) Drawn by parabolic curves having their vertex at the centre of the water

Last Answer : (B) Stopped at the edge of the river

Select the correct statement. A) Contour interval on any map is kept constant. (B) Direct method of contouring is cheaper than indirect method. (C) Intervisibility of points on a contour map cannot be ascertained. (D) Slope of a hill cannot be determined with the help of contours.

Description : Select the correct statement. . A) Contour interval on any map is kept constant. (B) Direct method of contouring is cheaper than indirect method. (C) Intervisibility of points on a contour map cannot be ascertained. (D) Slope of a hill cannot be determined with the help of contours.

Last Answer : (A) Contour interval on any map is kept constant.

Contour lines of different elevations can unite to form one line, only in the case of (A) A vertical cliff (B) A saddle (C) A water shed line (D) A hill top

Description : Contour lines of different elevations can unite to form one line, only in the case of  (A) A vertical cliff  (B) A saddle  (C) A water shed line  (D) A hill top 

Last Answer : (A) A vertical cliff 

Location of contour gradient for a high way is best set out from (A) Ridge down the hill (B) Saddle down the hill (C) Bottom to the ridge (D) Bottom to the saddle

Description : Location of contour gradient for a high way is best set out from (A) Ridge down the hill (B) Saddle down the hill (C) Bottom to the ridge (D) Bottom to the saddle

Last Answer : (B) Saddle down the hill

Straight, parallel and widely spaced contours represent (A) A steep surface (B) A flat surface (C) An inclined plane surface (D) Curved surface

Description : Straight, parallel and widely spaced contours represent (A) A steep surface (B) A flat surface (C) An inclined plane surface (D) Curved surface

Last Answer : (C) An inclined plane surface

Isopiestic lines are the contours (A) Drawn to represent water table (B) Drawn to represent piezometric heads (C) Drawn to piezometric surface (D) None of these

Description : Isopiestic lines are the contours (A) Drawn to represent water table (B) Drawn to represent piezometric heads (C) Drawn to piezometric surface (D) None of these

Last Answer : Answer: Option C

A situation in a game where, in the payoff matrix, maximin of row is equal to minimax of column is called___ a. Centre point b. Main point c. Saddle point d. Equal point

Description : A situation in a game where, in the payoff matrix, maximin of row is equal to minimax of column is called___ a. Centre point b. Main point c. Saddle point d. Equal point

Last Answer : c. Saddle point

To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab in line with AB. A ray is then drawn towards and at the table is oriented by back ray method. The orientation so obtained, is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Description : To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab ... , is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Last Answer : (C) Manifold and correct

Tilt of the staff in stadia tacheometry increases the intercept if it is (A) Away from the telescope pointing down hill (B) Towards the telescope pointing up-hill (C) Away from the telescope pointing up-hill (D) None of these

Description : Tilt of the staff in stadia tacheometry increases the intercept if it is (A) Away from the telescope pointing down hill (B) Towards the telescope pointing up-hill (C) Away from the telescope pointing up-hill (D) None of these

Last Answer : (C) Away from the telescope pointing up-hill

Profile levelling is usually done for determining (A) Contours of an area (B) Capacity of a reservoir (C) Elevations along a straight line (D) Boundaries of property

Description : Profile levelling is usually done for determining  (A) Contours of an area  (B) Capacity of a reservoir  (C) Elevations along a straight line  (D) Boundaries of property 

Last Answer : (C) Elevations along a straight line 

The best method of interpolation of contours, is by (A) Estimation (B) Graphical means (C) Computation (D) All of these

Description : The best method of interpolation of contours, is by (A) Estimation (B) Graphical means (C) Computation (D) All of these

Last Answer : (C) Computation

The representation of general topography of a very flat terrain is possible only (A) By drawing contours at large interval (B) By drawing contours at small interval (C) By giving spot levels at large interval (D) By giving spot levels to salient features at close interval

Description : The representation of general topography of a very flat terrain is possible only (A) By drawing contours at large interval (B) By drawing contours at small interval (C) By giving spot levels at large interval (D) By giving spot levels to salient features at close interval

Last Answer : (D) By giving spot levels to salient features at close interval

The constant vertical distance between two adjacent contours, is called (A) Horizontal interval (B) Horizontal equivalent (C) Vertical equivalent (D) Contour interval

Description : The constant vertical distance between two adjacent contours, is called (A) Horizontal interval (B) Horizontal equivalent (C) Vertical equivalent (D) Contour interval

Last Answer : (D) Contour interval

Contour interval is (A) The vertical distance between two consecutive contours (B) The horizontal distance between two consecutive contours (C) The vertical distance between two points on same contour (D) The horizontal distance between two points on same contour

Description : Contour interval is (A) The vertical distance between two consecutive contours (B) The horizontal distance between two consecutive contours (C) The vertical distance between two points on same contour (D) The horizontal distance between two points on same contour

Last Answer : (A) The vertical distance between two consecutive contours

On a hydrographic map, the following feature is shown: (A) High and low water lines (B) Depth contours (C) Land and water areas (D) All the above

Description : On a hydrographic map, the following feature is shown: (A) High and low water lines (B) Depth contours (C) Land and water areas (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) In the earth's magnetic field, a magnetic needle rests in magnetic meridian (B) The angle between the true meridian and the magnetic meridian is called magnetic variation (C) One end of the magnetic needle supported at its centre of gravity tends to dip down towards the nearer magnetic pole of the earth (D) All the above

Description : Pick up the correct statement from the following: (A) In the earth's magnetic field, a magnetic needle rests in magnetic meridian (B) The angle between the true meridian and the magnetic meridian is ... gravity tends to dip down towards the nearer magnetic pole of the earth (D) All the above

Last Answer : (D) All the above

The weight of a body is due to (A) Centripetal force of earth (B) Gravitational pull exerted by the earth (C) Forces experienced by body in atmosphere (D) Gravitational force of attraction towards the centre of the earth

Description : The weight of a body is due to  (A) Centripetal force of earth  (B) Gravitational pull exerted by the earth  (C) Forces experienced by body in atmosphere  (D) Gravitational force of attraction towards the centre of the earth 

Last Answer : (D) Gravitational force of attraction towards the centre of the earth 

Spacing of stirrups in a rectangular beam, is (A) Kept constant throughout the length (B) Decreased towards the centre of the beam (C) Increased at the ends (D) Increased at the centre of the beam

Description : Spacing of stirrups in a rectangular beam, is (A) Kept constant throughout the length (B) Decreased towards the centre of the beam (C) Increased at the ends (D) Increased at the centre of the beam

Last Answer : Answer: Option D

In highway construction on super-elevated curves, the rolling shall proceed from (A) Sides towards the centre (B) Centre towards the sides (C) Lower edge towards the upper edge (D) Upper edge towards the lower edge

Description : In highway construction on super-elevated curves, the rolling shall proceed from (A) Sides towards the centre (B) Centre towards the sides (C) Lower edge towards the upper edge (D) Upper edge towards the lower edge

Last Answer : Answer: Option C

The centre to centre spacing of vertical stirrups, in a rectangular beam, is (a) Increased towards the centre of the span of the beam (b) Decreased towards the centre of the span of the beam. (c) Increased at the ends. (d) None of these

Description : The centre to centre spacing of vertical stirrups, in a rectangular beam, is (a) Increased towards the centre of the span of the beam (b) Decreased towards the centre of the span of the beam. (c) Increased at the ends. (d) None of these

Last Answer : (a) Increased towards the centre of the span of the beam

Digitalis slows the heart in congestive heart failure by: A. Increasing vagal tone B. Decreasing sympathetic overactivity C. Direct depression of sinoatrial node D. All of the above

Description : Digitalis slows the heart in congestive heart failure by: A. Increasing vagal tone B. Decreasing sympathetic overactivity C. Direct depression of sinoatrial node D. All of the above

Last Answer : D. All of the above

In a singly reinforced beam (A) Compression is borne entirely by concrete (B) Steel possesses initial stresses when embedded in concrete (C) Plane sections transverse to the centre line of the beam before bending remain plane after bending (D) Elastic moduli for concrete and steel have different values within the limits of deformation of the beam

Description : In a singly reinforced beam (A) Compression is borne entirely by concrete (B) Steel possesses initial stresses when embedded in concrete (C) Plane sections transverse to the centre line ... Elastic moduli for concrete and steel have different values within the limits of deformation of the beam

Last Answer : Answer: Option C

A simply supported beam AB is subjected to a concentrated load at C, the centre of the span. The area of the SF diagram from A to C will give a) BM at C b) Load at S c) SF at C d)Difference between BM values at A and C

Description : A simply supported beam AB is subjected to a concentrated load at C, the centre of the span. The area of the SF diagram from A to C will give a) BM at C b) Load at S c) SF at C d)Difference between BM values at A and C

Last Answer : d)Difference between BM values at A and C

Among the following compounds, the decreasing order of reactivity towards electrophilic substitution is :

Description : Among the following compounds, the decreasing order of reactivity towards electrophilic substitution is :

Last Answer : Among the following compounds, the decreasing order of reactivity towards electrophilic substitution is : ... C. `IVgtIgtIIgtIII` D. `IIIgtIgtIIgtIV`

Arrange the following in order of decreasing tendency towards `S_(N^(2))` reaction : `{:(underset("(I)")(CH_(3)CH_(2)CH_(2)CH_(2)Cl)", "underset("(II)

Description : Arrange the following in order of decreasing tendency towards `S_(N^(2))` reaction : `{:(underset("(I)")(CH_(3)CH_(2)CH_(2)CH_(2)Cl)", "underset("(II)

Last Answer : Arrange the following in order of decreasing tendency towards `S_(N^(2))` reaction : `{: ... `IIIgtIVgtIIgtI` C. `IgtIIIgtIIgtIV` D. `IIgtIgtIIIgtIV`

Arrange the following in order of decreasing reactivity towards alkanes. HCl, HBr, HI, HF

Description : Arrange the following in order of decreasing reactivity towards alkanes. HCl, HBr, HI, HF

Last Answer : Ans. HI> HBr> HCl >HF

The contribution of agricultural sector is decreasing in India’s economy then what conclusion can be drawn? (a) India is growing towards a developed economy. (b) India is growing towards a developing economy. © India is growing towards a less developed economy. (d) None of the above.

Description : The contribution of agricultural sector is decreasing in India’s economy then what conclusion can be drawn? (a) India is growing towards a developed economy. (b) India is growing towards a developing economy. © India is growing towards a less developed economy. (d) None of the above.

Last Answer : (a) India is growing towards a developed economy.

In a theodolite (A) The telescope axis is perpendicular to transit axis (B) The axis of rotation is perpendicular to transit axis (C) The telescope axis, the transit axis and the rotation axis pass through the centre of theodolite (D) All the above

Description : In a theodolite (A) The telescope axis is perpendicular to transit axis (B) The axis of rotation is perpendicular to transit axis (C) The telescope axis, the transit axis and the rotation axis pass through the centre of theodolite (D) All the above

Last Answer : (D) All the above

The ratio of average values of shear stresses produced on the bed and the banks of a channel due to flowing water is (A) Less than 1 (B) Equal to 1 (C) Greater than 1 (D) Equal to zero

Description : The ratio of average values of shear stresses produced on the bed and the banks of a channel due to flowing water is (A) Less than 1 (B) Equal to 1 (C) Greater than 1 (D) Equal to zero

Last Answer : Answer: Option C

Total momentum within a closed system is A. increasing B. decreasing C. zero D. constant

Description : Total momentum within a closed system is A. increasing B. decreasing C. zero D. constant

Last Answer : constant

The ……………. tool is used in speadsheet that creates a growth series, wherein subseguent values follow an increasing or a decreasing geometric pattern. -Technology

Description : The ……………. tool is used in speadsheet that creates a growth series, wherein subseguent values follow an increasing or a decreasing geometric pattern. -Technology

Last Answer : The Source tool is used in spreadsheet that creates a growth series, wherein subsequent values follow an increasing or a decreasing geometric pattern.

The membership values of the membership function are nor strictly monotonically increasing or decreasing or strictly monoronically increasing than decreasing. A. Convex Fuzzy Set B. Non convex fuzzy set C. Normal Fuzzy set D. Sub normal fuzzy set

Description : The membership values of the membership function are nor strictly monotonically increasing or decreasing or strictly monoronically increasing than decreasing. A. Convex Fuzzy Set B. Non convex fuzzy set C. Normal Fuzzy set D. Sub normal fuzzy set

Last Answer : B. Non convex fuzzy set

A fuzzy set has a membership function whose membership values are strictly monotonically increasing or strictly monotonically decreasing or strictly monotonically increasing than strictly monotonically decreasing with increasing values for elements in the universe A. convex fuzzy set B. concave fuzzy set C. Non concave Fuzzy set D. Non Convex Fuzzy set

Description : A fuzzy set has a membership function whose membership values are strictly monotonically increasing or strictly monotonically decreasing or strictly monotonically increasing than strictly monotonically decreasing with increasing ... fuzzy set C. Non concave Fuzzy set D. Non Convex Fuzzy set

Last Answer : A. convex fuzzy set

If you were to plot the height of everyone in your class on graph the values would probable form a hill-shaped curve called?

Description : If you were to plot the height of everyone in your class on graph the values would probable form a hill-shaped curve called?

Last Answer : logistic model

The term ___________ is used for a depth-first search that chooses values for one variable at a time and returns when a variable has no legal values left to assign. a) Forward search b) Backtrack search c) Hill algorithm d) Reverse-Down-Hill search

Description : The term ___________ is used for a depth-first search that chooses values for one variable at a time and returns when a variable has no legal values left to assign. a) Forward search b) Backtrack search c) Hill algorithm d) Reverse-Down-Hill search

Last Answer : b) Backtrack search

want to learn down hill root pass for pipe line welding?

Description : want to learn down hill root pass for pipe line welding?

Last Answer : want get my certificate in welding you got any schools i can get that in NC

What is the main purpose of using Stress breakers: A. To distribute the load between teeth and ridges B. To distribute the load between the clasps and the face end of the saddle C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

Description : What is the main purpose of using Stress breakers: A. To distribute the load between teeth and ridges B. To distribute the load between the clasps and the face end of the saddle C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

Last Answer : C. It relieves the abutment tooth of occlusal loads that may exceed their physiologic strength

Explain the effect of 'worldwide economic depression' on India, towards late 1920s. -SST 10th

Description : Explain the effect of 'worldwide economic depression' on India, towards late 1920s. -SST 10th

Last Answer : The effects of worldwide depression on India were as follows : (i) India's trade was affected. exports decreased as international prices crashed. (ii) Agricultural prices fell due to ... colonial rule provided an opportunity to Mahatma Gandhi to launch the Civil Disobedience Movement in 1930.

Explain the effects of “worldwide economic depression’ on India, towards late 1920s. -SST 10th

Description : Explain the effects of “worldwide economic depression’ on India, towards late 1920s. -SST 10th

Last Answer : (i) The depression immediately affected Indian trade. India's exports and imports nearly halved between 1928 and 1934. As international prices crashed, prices in India plunged. Between ... grew as the government extended tariff protection to industries, under the pressure of nationalist opinion.

Explain the effects of 'worldwide economic depression on India, towards the late 1920s. -SST 10th

Description : Explain the effects of 'worldwide economic depression on India, towards the late 1920s. -SST 10th

Last Answer : Effects of worldwide economic depression in India: 1. Agricultural prices began to fall in India and collapsed after 1930. 2. As exports decreased and demand fell, peasants couldn't sell or pay the revenue. 3. The countryside became in turmoil by 1930.

What happened to the money in the banks when the banks closed great depression?

Description : What happened to the money in the banks when the banks closed great depression?

Last Answer : Need answer

Regarding the illustrated electrical schematic, 'S1-P', 'S1-Q', and 'S1-R' represent ____________. EL-0016 A. capacitors B. normally-closed contacts C. normally-open contacts D. normally-closed pushbutton switches

Description : Regarding the illustrated electrical schematic, 'S1-P', 'S1-Q', and 'S1-R' represent ____________. EL-0016 A. capacitors B. normally-closed contacts C. normally-open contacts D. normally-closed pushbutton switches

Last Answer : Answer: C

What allows the wheel to follow the contours of the ground when travelling on uneven ground?

Description : What allows the wheel to follow the contours of the ground when travelling on uneven ground?

Last Answer : Workers must follow the method statement unless they feel it is not suitable traction by allowing all 4 wheels to remain on the ground when travelling on slopes carrying uneven loads turning at spped poor tyre pressure

The imaginary lines joining places of same height at equal intervals are – (1) Hachures (2) Contours (3) Spot-heights (4) Isomers

Description : The imaginary lines joining places of same height at equal intervals are – (1) Hachures (2) Contours (3) Spot-heights (4) Isomers

Last Answer : (2) Contours Explanation: In cartography, a contour line (often just called a "contour") joins points of equal elevation (height) above a given level, such as mean sea level.