Isopiestic lines are the contours (A) Drawn to represent water table (B) Drawn to represent piezometric heads (C) Drawn to piezometric surface (D) None of these

Isopiestic lines are the contours
(A) Drawn to represent water table
(B) Drawn to represent piezometric heads
(C) Drawn to piezometric surface
(D) None of these
by

1 Answer

Answer :

Answer: Option C
by

Related questions

The surface joining the static levels in several non-pumping wells penetrating a continuous confined aquifer represents (a) Water-table surface (b) Capillary fringe (c) Piezometric surface of the aquifer (d) Physical top surface of the aquifer

Description : The surface joining the static levels in several non-pumping wells penetrating a continuous confined aquifer represents (a) Water-table surface (b) Capillary fringe (c) Piezometric surface of the aquifer (d) Physical top surface of the aquifer

Last Answer : (c) Piezometric surface of the aquifer

Piezometric head is the sum of the __________ heads. (A) Elevation & kinetic energy (B) Elevation & pressure (C) Kinetic energy & pressure

Description : Piezometric head is the sum of the __________ heads. (A) Elevation & kinetic energy (B) Elevation & pressure (C) Kinetic energy & pressure

Last Answer : (B) Elevation & pressure

Closed contours, with higher value inwards, represent a (A) Depression (B) Hillock (C) Plain surface(D) None of the above

Description : Closed contours, with higher value inwards, represent a (A) Depression (B) Hillock (C) Plain surface (D) None of the above

Last Answer : (B) Hillock

Straight, parallel and widely spaced contours represent (A) A steep surface (B) A flat surface (C) An inclined plane surface (D) Curved surface

Description : Straight, parallel and widely spaced contours represent (A) A steep surface (B) A flat surface (C) An inclined plane surface (D) Curved surface

Last Answer : (C) An inclined plane surface

The disconnected lines drawn on a map for showing slope- (1) Bench marks (2) Contours (3) Form lines (4) Hachure

Description : The disconnected lines drawn on a map for showing slope- (1) Bench marks (2) Contours (3) Form lines (4) Hachure

Last Answer : (4) Hachure Explanation: Hachures are short disconnected lines drawn on the map to depict the slope of the ground surface. They are drawn in rows; each row being disconnected from the other. They ... gentler slopes. Hachures are not drawn for leveled areas, such as flat valley or a plateau top.

The disconnected lines drawn on a map for showing slope (1) Bench marks (2) Contours (3) Form lines (4) Hachure

Description : The disconnected lines drawn on a map for showing slope (1) Bench marks (2) Contours (3) Form lines (4) Hachure

Last Answer : Hachure

In case of a double line river, contours are (A) Stopped at the banks of the river (B) Stopped at the edge of the river (C) Drawn across the water (D) Drawn by parabolic curves having their vertex at the centre of the water

Description : In case of a double line river, contours are (A) Stopped at the banks of the river (B) Stopped at the edge of the river (C) Drawn across the water (D) Drawn by parabolic curves having their vertex at the centre of the water

Last Answer : (B) Stopped at the edge of the river

The isobars drawn on a surface weather chart represent lines of equal pressure: a. At flight level b. At height of observatory c. At a determined density altitude d. Reduced to sea level

Description : The isobars drawn on a surface weather chart represent lines of equal pressure:  a. At flight level  b. At height of observatory  c. At a determined density altitude  d. Reduced to sea level

Last Answer : d. Reduced to sea level

The isobars drawn on a surface weather chart represent lines of equal pressure: a. At flight level b. At height of observatory c. At a determined density altitude d. Reduced to sea level

Description : The isobars drawn on a surface weather chart represent lines of equal pressure: a. At flight level b. At height of observatory c. At a determined density altitude d. Reduced to sea level

Last Answer : d. Reduced to sea level

Closed contours of decreasing values towards their centre, represent (A) A hill (B) A depression (C) A saddle or pass (D) A river bed

Description : Closed contours of decreasing values towards their centre, represent  (A) A hill  (B) A depression  (C) A saddle or pass  (D) A river bed

Last Answer : (B) A depression 

A closed contour line with two or more higher contours inside it will represent a (a) Depression (b) Hill (c) Cave (d) Well

Description : A closed contour line with two or more higher contours inside it will represent a (a) Depression (b) Hill (c) Cave (d) Well

Last Answer : (b) Hill

On a hydrographic map, the following feature is shown: (A) High and low water lines (B) Depth contours (C) Land and water areas (D) All the above

Description : On a hydrographic map, the following feature is shown: (A) High and low water lines (B) Depth contours (C) Land and water areas (D) All the above

Last Answer : (D) All the above

Which of the following pairs are correctly matched? 1. Piezometric head : Sum of datum head and pressure head 2. Dynamic head : Sum of datum head and velocity head 3. Stagnation head : Sum of Piezometric head and velocity head 4. Total head : Sum of Piezometric head and dynamic head (a) 1, 2 & 3 only (b) 1, 3 & 4 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Description : Which of the following pairs are correctly matched? 1. Piezometric head : Sum of datum head and pressure head 2. Dynamic head : Sum of datum head and velocity head 3. Stagnation head : Sum of Piezometric head and velocity head 4. Total head ... (b) 1, 3 & 4 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Last Answer : (b) 1, 3 & 4 only

A system is said to be isopiestic, if there is no __________ change. (A) Temperature (B) Pressure (C) Volume (D) None of these

Description : A system is said to be isopiestic, if there is no __________ change. (A) Temperature (B) Pressure (C) Volume (D) None of these

Last Answer : (B) Pressure

The imaginary lines joining places of same height at equal intervals are – (1) Hachures (2) Contours (3) Spot-heights (4) Isomers

Description : The imaginary lines joining places of same height at equal intervals are – (1) Hachures (2) Contours (3) Spot-heights (4) Isomers

Last Answer : (2) Contours Explanation: In cartography, a contour line (often just called a "contour") joins points of equal elevation (height) above a given level, such as mean sea level.

Contours are imaginary lines showing (1) places of equal atmospheric pressure (2) same temperature areas (3) places of equal altitudes (4) equal sunshine areas

Description : Contours are imaginary lines showing (1) places of equal atmospheric pressure (2) same temperature areas (3) places of equal altitudes (4) equal sunshine areas

Last Answer : (3) places of equal altitudes Explanation: In cartography, a contour line (often just called a "contour") joins points of equal elevation (height) above a given level, such as mean sea ... allows map readers to infer relative gradient of a parameter and estimate that parameter at specific places.

The imaginary lines joining places of same height at equal intervals are (1) Hachures (2) Contours (3) Spot-heights (4) Isomers

Description : The imaginary lines joining places of same height at equal intervals are (1) Hachures (2) Contours (3) Spot-heights (4) Isomers

Last Answer : Contours

Contours are imaginary lines showing (1) places of equal atmospheric pressure (2) same temperature areas (3) places of equal altitudes (4) equal sunshine areas

Description : Contours are imaginary lines showing (1) places of equal atmospheric pressure (2) same temperature areas (3) places of equal altitudes (4) equal sunshine areas

Last Answer : places of equal altitudes

The __________ is measured by a piezometric opening. (A) Dynamic pressure (B) Static pressure (C) Total pressure (D) Point velocity

Description : The __________ is measured by a piezometric opening. (A) Dynamic pressure (B) Static pressure (C) Total pressure (D) Point velocity

Last Answer : (C) Total pressure

Profile levelling is usually done for determining (A) Contours of an area (B) Capacity of a reservoir (C) Elevations along a straight line (D) Boundaries of property

Description : Profile levelling is usually done for determining  (A) Contours of an area  (B) Capacity of a reservoir  (C) Elevations along a straight line  (D) Boundaries of property 

Last Answer : (C) Elevations along a straight line 

The best method of interpolation of contours, is by (A) Estimation (B) Graphical means (C) Computation (D) All of these

Description : The best method of interpolation of contours, is by (A) Estimation (B) Graphical means (C) Computation (D) All of these

Last Answer : (C) Computation

Contours of different elevations may cross each other only in the case of (A) An overhanging cliff (B) A vertical cliff (C) A saddle (D) An inclined plane

Description : Contours of different elevations may cross each other only in the case of (A) An overhanging cliff (B) A vertical cliff (C) A saddle (D) An inclined plane

Last Answer : (A) An overhanging cliff

The representation of general topography of a very flat terrain is possible only (A) By drawing contours at large interval (B) By drawing contours at small interval (C) By giving spot levels at large interval (D) By giving spot levels to salient features at close interval

Description : The representation of general topography of a very flat terrain is possible only (A) By drawing contours at large interval (B) By drawing contours at small interval (C) By giving spot levels at large interval (D) By giving spot levels to salient features at close interval

Last Answer : (D) By giving spot levels to salient features at close interval

Select the correct statement. (A) A contour is not necessarily a closed curve. B) A contour represents a ridge line if the concave side of lower value contour lies towards the higher value contour (C) Two contours of different elevations do not cross each other except in case of an overhanging cliff (D) All of the above statements are correct

Description : Select the correct statement. (A) A contour is not necessarily a closed curve. B) A contour represents a ridge line if the concave side of lower value contour lies towards the higher value contour ... each other except in case of an overhanging cliff (D) All of the above statements are correct

Last Answer : (C) Two contours of different elevations do not cross each other except in case of an overhanging clif

Select the correct statement. A) Contour interval on any map is kept constant. (B) Direct method of contouring is cheaper than indirect method. (C) Intervisibility of points on a contour map cannot be ascertained. (D) Slope of a hill cannot be determined with the help of contours.

Description : Select the correct statement. . A) Contour interval on any map is kept constant. (B) Direct method of contouring is cheaper than indirect method. (C) Intervisibility of points on a contour map cannot be ascertained. (D) Slope of a hill cannot be determined with the help of contours.

Last Answer : (A) Contour interval on any map is kept constant.

The constant vertical distance between two adjacent contours, is called (A) Horizontal interval (B) Horizontal equivalent (C) Vertical equivalent (D) Contour interval

Description : The constant vertical distance between two adjacent contours, is called (A) Horizontal interval (B) Horizontal equivalent (C) Vertical equivalent (D) Contour interval

Last Answer : (D) Contour interval

Contour interval is (A) The vertical distance between two consecutive contours (B) The horizontal distance between two consecutive contours (C) The vertical distance between two points on same contour (D) The horizontal distance between two points on same contour

Description : Contour interval is (A) The vertical distance between two consecutive contours (B) The horizontal distance between two consecutive contours (C) The vertical distance between two points on same contour (D) The horizontal distance between two points on same contour

Last Answer : (A) The vertical distance between two consecutive contours

Influence lines are drawn for structures (A) Of any type (B) Statically determinate (C) Pin-jointed truss (D) None of these

Description : Influence lines are drawn for structures  (A) Of any type  (B) Statically determinate  (C) Pin-jointed truss  (D) None of these 

Last Answer : (A) Of any type 

A series of closely spaced contour lines represent a (a) Steep slope* (b) Gentle slope (c) Uniform slope (d) Plane surface

Description : A series of closely spaced contour lines represent a (a) Steep slope* (b) Gentle slope (c) Uniform slope (d) Plane surface

Last Answer : (a) Steep slope*

While setting a plane table at a station it was found that the error in centering was 30 cm away from the ray of length 40 m drawn from the station. If the scale of the plan is 1 cm = 2 cm, the displacement of the end of the ray in plan from the true position will be (A) 0.02 cm (B) 0.15 cm (C) 0.2 cm (D) 0.1 cm

Description : While setting a plane table at a station it was found that the error in centering was 30 cm away from the ray of length 40 m drawn from the station. If the scale of the plan is 1 cm = 2 cm, the displacement of the end of ... true position will be (A) 0.02 cm (B) 0.15 cm (C) 0.2 cm (D) 0.1 cm

Last Answer : (B) 0.15 cm

To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab in line with AB. A ray is then drawn towards and at the table is oriented by back ray method. The orientation so obtained, is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Description : To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab ... , is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Last Answer : (C) Manifold and correct

a direct arrow is drawn from the process to the resource rectangle to represent each pending resource request: a. TS b. SP Cc. CCR d. RAG

Description : a direct arrow is drawn from the process to the resource rectangle to represent each pending resource request: a. TS b. SP Cc. CCR d. RAG

Last Answer : d. RAG

What allows the wheel to follow the contours of the ground when travelling on uneven ground?

Description : What allows the wheel to follow the contours of the ground when travelling on uneven ground?

Last Answer : Workers must follow the method statement unless they feel it is not suitable traction by allowing all 4 wheels to remain on the ground when travelling on slopes carrying uneven loads turning at spped poor tyre pressure

Isolines joining places of equal rainfall are called – (1) Isohyets (2) Isotherms (3) Isobars (4) Contours

Description : Isolines joining places of equal rainfall are called – (1) Isohyets (2) Isotherms (3) Isobars (4) Contours

Last Answer : (1) Isohyets Explanation: Isohyet is a line drawn on a map connecting points that receive equal amounts of rainfall in a given period. A map with isohyets is called an isohyetal map.

is a method of ploughing in which the soil broken and turn along the contours. a. Normal ploughing c. Contour ploughing b. Sub soil plough. d. Disc plough

Description : is a method of ploughing in which the soil broken and turn along the contours. a. Normal ploughing c. Contour ploughing b. Sub soil plough. d. Disc plough

Last Answer : Contour ploughing

What are two contours of Nichols chart?

Description : What are two contours of Nichols chart?

Last Answer : Nichols chart of M and N contours, superimposed on ordinary graph. The M contours are the magnitude of closed loop system in decibels and the N contours are the phase angle locus of closed loop system.

The height of formation depends upon the a) Ground contours and the gradient adopted* b) Ground contour only c) Gradient adopted only d) Rainfall intensity over the year

Description : The height of formation depends upon the a) Ground contours and the gradient adopted* b) Ground contour only c) Gradient adopted only d) Rainfall intensity over the year

Last Answer : a) Ground contours and the gradient adopted*

State any four characteristics of contours with sketches.

Description : State any four characteristics of contours with sketches.

Last Answer : Characteristics of contours - The characteristics of contours are described in following statements with the help of necessary sketches. 1. All the points on contour line represent same reduced level or equal ... 8. The summit of four ridge lines represents saddle as shown in sketch 8.

In a contour map, if contours are crossing each other, what will be nature of topography? Draw the sketch to support your answer.

Description : In a contour map, if contours are crossing each other, what will be nature of topography? Draw the sketch to support your answer.

Last Answer : If contours are crossing or intersecting each other, then there is overhanging cliff as shown in figure 1 below.

State the methods of locating contours and explain direct method.

Description : State the methods of locating contours and explain direct method.

Last Answer : Methods of locating contours :- 1) Direct method 2) Indirect method i) By cross section ii) By Squares (Block Contouring) iii) Tachometric Method Direct method of contouring:- In ... identical coloured pegs, we get the required contours on ground by this direct method of contouring.

Describe the method of locating contours by square method.

Description : Describe the method of locating contours by square method. 

Last Answer : 1) The method of square is indirect method of locating contours. 2) The method of squares is used where the area to be surveyed is small and not much undulating. 3) The area to be surveyed ... points are written on the respective corners. 6) The contours are then interpolated between them. 

Define the term interpolation of contours.

Description : Define the term interpolation of contours. 

Last Answer : Interpolation of contours is the process of locating the required contours proportionately between the plotted reduced levels on sheet. 

State methods of locating contours and explain any one.

Description : State methods of locating contours and explain any one.

Last Answer : Following are the methods of locating contours 1. Direct Method. 2. Indirect method.  a) By Square / Block Contouring  b) By Cross Section  c) Tacheometric Contouring ... squares are plotted and reduced levels are written at their corners and the contours lines are then interpolated.

Isolines joining places of equal rainfall are called ________ (1) isohyets (2) isotherms (3) isobars (4) contours

Description :  Isolines joining places of equal rainfall are called ________ (1) isohyets (2) isotherms (3) isobars (4) contours 

Last Answer : isohyets

What markers should I be using so that I can still see pencil drawn lines?

Description : What markers should I be using so that I can still see pencil drawn lines?

Last Answer : answer:Google for ‘Shinhan Touch markers’ – quite similar to Tria Pantones but less pricey. I love ‘em. No link cos I wasn’t sure which country you’re based in.

A student wrote the equations of the lines a and b drawn in the following graph as y =1 and 2x + 3y =6. Is he right? -Maths 9th

Description : A student wrote the equations of the lines a and b drawn in the following graph as y =1 and 2x + 3y =6. Is he right? -Maths 9th

Last Answer : Clearly, line a is parallel to X-axis at a distance of 1 unit in positive direction of Y-axis, therefore its equation is y = 1. Also, if we draw the graph of line 2x + 3y = 6, then its graph should intersect X - axis at (3,0 ... Base Height = 1/2 BC AC = 1/2 1 3 / 2 = 3 / 4 sq unit.

A student wrote the equations of the lines a and b drawn in the following graph as y =1 and 2x + 3y =6. Is he right? -Maths 9th

Description : A student wrote the equations of the lines a and b drawn in the following graph as y =1 and 2x + 3y =6. Is he right? -Maths 9th

Last Answer : Clearly, line a is parallel to X-axis at a distance of 1 unit in positive direction of Y-axis, therefore its equation is y = 1. Also, if we draw the graph of line 2x + 3y = 6, then its graph should intersect X - axis at (3,0 ... Base Height = 1/2 BC AC = 1/2 1 3 / 2 = 3 / 4 sq unit.

What is the name of the horizontal and the vertical lines drawn to determine the position of any point in the Cartesian plane? -Maths 9th

Description : What is the name of the horizontal and the vertical lines drawn to determine the position of any point in the Cartesian plane? -Maths 9th

Last Answer : The name of horizontal and vertical lines drawn to determine the position of any point in the Cartesian plane is x-axis and y-axis respectively

30. Radical centre of circles drawn on the sides as a diameter of triangle formed by the lines the `3x-4y+6=0`, `x-y+2=0` and `4x+3y-17=0` is

Description : 30. Radical centre of circles drawn on the sides as a diameter of triangle formed by the lines the `3x-4y+6=0`, `x-y+2=0` and `4x+3y-17=0` is

Last Answer : 30. Radical centre of circles drawn on the sides as a diameter of triangle formed by the lines the `3x-4y+6=0`, `x-y+ ... . (-2,3) C. (-2,-3) D. (2,3)