Subtense tacheometry is generally preferred to if ground is (A) Flat (B) Undulating (C) Mountainous (D) Deserts

Subtense tacheometry is generally preferred to if ground is 

(A) Flat 

(B) Undulating 

(C) Mountainous 

(D) Deserts 

by

1 Answer

Answer :

(B) Undulating 

by

Related questions

The subtense tacheometry method is adopted when the ground is (a) Flat (b) Inclined (c) Undulating (d) A waterbody

Description : The subtense tacheometry method is adopted when the ground is (a) Flat (b) Inclined (c) Undulating (d) A waterbody

Last Answer : (a) Flat

The method generally preferred to for contouring an undulating area, is (A) Chain surveying (B) Plane table surveying (C) Tacheometrical surveying (D) Compass surveying

Description : The method generally preferred to for contouring an undulating area, is (A) Chain surveying (B) Plane table surveying (C) Tacheometrical surveying (D) Compass surveying

Last Answer : (C) Tacheometrical surveying

State any two situations under which tacheometry is preferred.

Description : State any two situations under which tacheometry is preferred. 

Last Answer : Tacheometry is preferred in following situations. 1. When horizontal distances can't be measured by chaining on highly uneven ground. 2. When vertical distances or reduced levels can't be measured ... is necessary to fill the details in topographic map and contour map with low degree of precision.

Subtense bar is an instrument used for (A) Levelling (B) Measurement of horizontal distances in plane areas (C) Measurement of horizontal distances in undulated areas (D) Measurement of angles

Description : Subtense bar is an instrument used for (A) Levelling (B) Measurement of horizontal distances in plane areas (C) Measurement of horizontal distances in undulated areas (D) Measurement of angles

Last Answer : (C) Measurement of horizontal distances in undulated areas

In high mountainous region, the type of roof generally recommended for buildings, is (A) Shed type (B) Gable type (C) Gambrel type (D) Mansard type

Description : In high mountainous region, the type of roof generally recommended for buildings, is (A) Shed type (B) Gable type (C) Gambrel type (D) Mansard type

Last Answer : Option C

A circular gravity aqueduct is not generally preferred to because of (A) Its maximum hydraulic mean depth (B) Maximum area per unit of wetted perimeter (C) Minimum cost of construction (D) Its proper support on the ground

Description : A circular gravity aqueduct is not generally preferred to because of (A) Its maximum hydraulic mean depth (B) Maximum area per unit of wetted perimeter (C) Minimum cost of construction (D) Its proper support on the ground

Last Answer : (D) Its proper support on the ground

The Inca lived in a very mountainous landscape. They were able to grow crops by using a special kind of farming in which they created flat pieces of land on the side of the mountains. This type of farming is called?

Description : The Inca lived in a very mountainous landscape. They were able to grow crops by using a special kind of farming in which they created flat pieces of land on the side of the mountains. This type of farming is called?

Last Answer : Terrace farming.

In tangential tacheometry, an ordinary level staff is used (A) Leaning towards the instrument for inclined sights upward (B) Leaning away from the instrument for inclined sights downwards (C) Vertical in all cases (D) None of these

Description : In tangential tacheometry, an ordinary level staff is used (A) Leaning towards the instrument for inclined sights upward (B) Leaning away from the instrument for inclined sights downwards (C) Vertical in all cases (D) None of these

Last Answer : (C) Vertical in all cases

Greater accuracy in linear measurements, is obtained by (A) Tacheometry (B) Direct chaining (C) Direct taping (D) All the above

Description : Greater accuracy in linear measurements, is obtained by (A) Tacheometry (B) Direct chaining (C) Direct taping (D) All the above

Last Answer : (C) Direct taping

The branch of surveying in which both horizontal and vertical positions of a point, are determined by making instrumental observations, is known (A) Tacheometry (B) Tachemetry (C) Telemetry (D) All the above

Description : The branch of surveying in which both horizontal and vertical positions of a point, are determined by making instrumental observations, is known (A) Tacheometry (B) Tachemetry (C) Telemetry (D) All the above

Last Answer : (D) All the above

Tilt of the staff in stadia tacheometry increases the intercept if it is (A) Away from the telescope pointing down hill (B) Towards the telescope pointing up-hill (C) Away from the telescope pointing up-hill (D) None of these

Description : Tilt of the staff in stadia tacheometry increases the intercept if it is (A) Away from the telescope pointing down hill (B) Towards the telescope pointing up-hill (C) Away from the telescope pointing up-hill (D) None of these

Last Answer : (C) Away from the telescope pointing up-hill

Flat footed camels can walk easily in sandy deserts because - (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by increasing the area of the surface in contact (3) pressure on the sand is decreased by decreasing the area of the surface in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Description : Flat footed camels can walk easily in sandy deserts because - (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by ... in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Last Answer : (1) pressure on the sand is decreased by increasing the area of the surface in contact Explanation: Camels have broad, flat, leathery pads with two toes on each foot. When the camel places its foot on ... the animal on loose sand in much the same way that a snowshoe helps a person walk on snow.

Flat footed camels can walk easily in sandy deserts because (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by increasing the area of the surface in contact (3) pressure on the sand is decreased by decreasing the area of the surface in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Description : Flat footed camels can walk easily in sandy deserts because (1) pressure on the sand is decreased by increasing the area of the surface in contact (2) pressure on the sand is increased by increasing ... in contact (4) pressure on the sand is increased by decreasing the area of the surface in contact

Last Answer : pressure on the sand is decreased by increasing the area of the surface in contact

Which one among the following is not a reason for practising tank irrigation in the Peninsular India? [NDA 2011] (a) The undulating relief and hard rocks (b) little percolation of rain water due to impervious rock structure (c) Most of the rivers of Peninsular India are perennial (d) There are many streams which become torrential during rainy season

Description : Which one among the following is not a reason for practising tank irrigation in the Peninsular India? [NDA 2011] (a) The undulating relief and hard rocks (b) little percolation of rain ... of Peninsular India are perennial (d) There are many streams which become torrential during rainy season

Last Answer : Ans: (c)

Irrigation method, suitable for undulating land, sandy soils and Vegetable and fruit crops

Description : Irrigation method, suitable for undulating land, sandy soils and Vegetable and fruit crops

Last Answer : Ans.Sprinkler method

Tank irrigation is not popular in North India because, A. There are perennial rivers. B. Land is not undulating. C. The surface there is pervious and cannot collect water effectively. D. All the above.

Description : Tank irrigation is not popular in North India because, A. There are perennial rivers. B. Land is not undulating. C. The surface there is pervious and cannot collect water effectively. D. All the above.

Last Answer : D. All the above.

The tank irrigation is more popular in peninsular plateau because of, A. There are hard and impervious rocks. B. Undulating land. C. Most of the rivers are seasonal in that region. D. All the above.

Description : The tank irrigation is more popular in peninsular plateau because of, A. There are hard and impervious rocks. B. Undulating land. C. Most of the rivers are seasonal in that region. D. All the above.

Last Answer : D. All the above.

Sprinkler irrigation is suitable, where the soil has— (A) Clayey texture (B) Loamy texture (C) Undulating topography (D) All of these

Description : Sprinkler irrigation is suitable, where the soil has— (A) Clayey texture (B) Loamy texture (C) Undulating topography (D) All of these

Last Answer : (D) All of these

Hydrographic surveys deal with the mapping of (A) Large water bodies (B) Heavenly bodies (C) Mountainous region (D) Canal system

Description : Hydrographic surveys deal with the mapping of (A) Large water bodies (B) Heavenly bodies (C) Mountainous region (D) Canal system

Last Answer : (A) Large water bodies

If the cross slope of a country is 25% to 60%, the terrain is classified as (A) Plain (B) Rolling (C) Steep (D) Mountainous

Description : If the cross slope of a country is 25% to 60%, the terrain is classified as (A) Plain (B) Rolling (C) Steep (D) Mountainous

Last Answer : Answer: Option D

The normal road width of National and State highways (A) Is kept 45 m (B) In plain and rolling terrain built-up area, is 30 m (C) In mountainous built-up area is 20 m (D) All the above

Description : The normal road width of National and State highways (A) Is kept 45 m (B) In plain and rolling terrain built-up area, is 30 m (C) In mountainous built-up area is 20 m (D) All the above

Last Answer : Answer: Option D

Road width 8.8 m of two lane National highways or State highways in mountainous terrain (A) Excludes the width of parapet (0.6 m) (B) Excludes the width of side drain (0.6 m) (C) Excludes the width of parapet and side drain (D) Includes the width of parapet and side drain

Description : Road width 8.8 m of two lane National highways or State highways in mountainous terrain (A) Excludes the width of parapet (0.6 m) (B) Excludes the width of side drain (0.6 m) (C) Excludes the width of parapet and side drain (D) Includes the width of parapet and side drain

Last Answer : Answer: Option C

If cross slope of a country is 10% to 25%, the terrain is classified as (A) Rolling (B) Mountainous (C) Steep (D) Plain

Description : If cross slope of a country is 10% to 25%, the terrain is classified as (A) Rolling (B) Mountainous (C) Steep (D) Plain

Last Answer : Answer: Option A

If cross slope of a country is upto 10% the terrain is classified as (A) Plain (B) Rolling (C) Mountainous (D) Steep

Description : If cross slope of a country is upto 10% the terrain is classified as (A) Plain (B) Rolling (C) Mountainous (D) Steep

Last Answer : Answer: Option A

If cross slope of a country is greater than 60%, the terrain is classified as(A) Rolling (B) Mountainous (C) Steep (D) Plain

Description : If cross slope of a country is greater than 60%, the terrain is classified as (A) Rolling (B) Mountainous (C) Steep (D) Plain

Last Answer : Answer: Option C

The minimum design speed of various types of highways in plain terrain is the same as the ruling design speed of (A) Rolling terrain (B) Mountainous terrain (C) Steep terrain (D) None of these

Description : The minimum design speed of various types of highways in plain terrain is the same as the ruling design speed of (A) Rolling terrain (B) Mountainous terrain (C) Steep terrain (D) None of these

Last Answer : Answer: Option A

Where are the hot deserts generally found? (1) On the eastern margins of the Tropics (2) On the western margins of the Tropics (3) Nearer the Equator (4) In the middle of the Continents

Description : Where are the hot deserts generally found? (1) On the eastern margins of the Tropics (2) On the western margins of the Tropics (3) Nearer the Equator (4) In the middle of the Continents

Last Answer : (2) On the western margins of the Tropics Explanation: The deserts lie in the belt of the trade winds which blow from northeast in the northern hemisphere and southeast in the southern hemisphere. ... west side of continents. Examples are the Thar Desert in Pakistan and the Atacama desert in Chile.

Where are the hot deserts generally found ? (1) On the eastern margins of the Tropics (2) On the western margins of the Tropics (3) Nearer the Equator (4) In the middle of the Continents

Description : Where are the hot deserts generally found ? (1) On the eastern margins of the Tropics (2) On the western margins of the Tropics (3) Nearer the Equator (4) In the middle of the Continents 

Last Answer : On the western margins of the Tropics

Define tacheometry. State the principle of tacheometry with sketch.

Description : Define tacheometry. State the principle of tacheometry with sketch.

Last Answer : Tacheometry : It is the branch of angular surveying in which horizontal and vertical distances are determined from instrumental observations only, is known as tacheometry. Principle of tacheometry : ... to corresponding staff intercept remains constant as shown below in figure 3

State the limitations of tacheometry.

Description : State the limitations of tacheometry.

Last Answer : Tacheometry is a surveying method that uses optical instruments, such as a theodolite or total station, to measure horizontal and vertical angles and distances. Some limitations of tacheometry include: ... and experience of the operator, and human error can lead to inaccuracies in the measurements.

State the principle of tacheometry.

Description : State the principle of tacheometry.

Last Answer : Principle of tacheometry is stadia surveying which to enable horizontal and vertical distance to be computed from readings upon stadia rod and thus eliminate chaining operation.

Cast iron pipes are generally preferred to, because (A) Of moderate cost (B) Of ease to join (C) Of longer life (D) All the above

Description : Cast iron pipes are generally preferred to, because (A) Of moderate cost (B) Of ease to join (C) Of longer life (D) All the above

Last Answer : (D) All the above

True meridians are generally preferred to magnetic meridians because (A) These converge to a point (B) These change due to change in time (C) These remain constant (D) None of these

Description : True meridians are generally preferred to magnetic meridians because  (A) These converge to a point  (B) These change due to change in time  (C) These remain constant  (D) None of these 

Last Answer : (C) These remain constant 

In tacheometrical observations, vertical staff holding is generally preferred to normal staffing, due to (A) Ease of reduction of observations (B) Facility of holding (C) Minimum effect of careless holding on the result (D) None of these

Description : In tacheometrical observations, vertical staff holding is generally preferred to normal staffing, due to (A) Ease of reduction of observations (B) Facility of holding (C) Minimum effect of careless holding on the result (D) None of these

Last Answer : (C) Minimum effect of careless holding on the result

Pile foundations are generally preferred to for (A) Bridge foundations (B) Sky scrapper buildings (C) Residential buildings (D) Runways

Description : Pile foundations are generally preferred to for (A) Bridge foundations (B) Sky scrapper buildings (C) Residential buildings (D) Runways

Last Answer : Answer: Option B

For the movement of vehicles at an intersection of two roads, without any interference, the type of grade separator generally preferred to, is (A) Delta (B) Trumpet (C) Diamond interchange (D) Clover leaf

Description : For the movement of vehicles at an intersection of two roads, without any interference, the type of grade separator generally preferred to, is (A) Delta (B) Trumpet (C) Diamond interchange (D) Clover leaf

Last Answer : Answer: Option D

When the width of car parking space and width of street are limited, generally preferred parking system is (A) Parallel parking (B) 45° angle parking (C) 65° angle parking (D) 90° angle parking

Description : When the width of car parking space and width of street are limited, generally preferred parking system is (A) Parallel parking (B) 45° angle parking (C) 65° angle parking (D) 90° angle parking

Last Answer : Answer: Option A

For construction of structures in sea water, the cement generally preferred to, is (A) Portland-pozzolana cement (B) Quick setting cement (C) Low heat Portland cement (D) Rapid hardening cement

Description : For construction of structures in sea water, the cement generally preferred to, is (A) Portland-pozzolana cement (B) Quick setting cement (C) Low heat Portland cement (D) Rapid hardening cement

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) Lime mortar with cement in the ratio of in 10 is cheaper and better for outside plaster (B) For very cold or very hot climate, a compact and closed plan should be provided (C) On the sea coast, an exposed and open house is generally preferred (D) All the above

Description : Pick up the correct statement from the following: (A) Lime mortar with cement in the ratio of in 10 is cheaper and better for outside plaster (B) For very cold or very hot climate, a compact and closed ... (C) On the sea coast, an exposed and open house is generally preferred (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Cavity of a cavity wall should start near ground level (B) Cavity of a cavity wall should terminate near eaves level of sloping roof (C) Cavity of a cavity wall should terminate near coping of flat roof with parapet wall (D) All the above

Description : Pick up the correct statement from the following: (A) Cavity of a cavity wall should start near ground level (B) Cavity of a cavity wall should terminate near eaves level of sloping roof (C) Cavity of a cavity wall should terminate near coping of flat roof with parapet wall (D) All the above

Last Answer : Answer: Option D

The diameter of the column head support a flat slab, is generally kept (A) 0.25 times the span length (B) 0.25 times the diameter of the column (C) 4.0 cm larger than the diameter of the column (D) 5.0 cm larger than the diameter of the column

Description : The diameter of the column head support a flat slab, is generally kept (A) 0.25 times the span length (B) 0.25 times the diameter of the column (C) 4.0 cm larger than the diameter of the column (D) 5.0 cm larger than the diameter of the column

Last Answer : Option A

Why is flat tape preferred instead of round cord when wire bundles are laced?

Description : Why is flat tape preferred instead of round cord when wire bundles are laced?

Last Answer : Round cord has a tendency to cut into the wire insulation.

Can camels be used for riding in mountainous regions?

Description : Can camels be used for riding in mountainous regions?

Last Answer : A: While camels are well-adapted for desert environments, they are not typically used for riding in mountainous regions. Their anatomy and adaptations make them more suitable for flat terrains and sandy deserts.

Did you spend years in or grow up in a mountainous state and , finding yourself in the flatlands, feel sad and yearning for mountains?

Description : Did you spend years in or grow up in a mountainous state and , finding yourself in the flatlands, feel sad and yearning for mountains?

Last Answer : My girlfriend lived wi.thin sight of Mt Sopris and the Roaring Fork Valley for ten years, then moved to San Francisco. She misses the mountains quite a bit, almost homesick for it. Plans to move back in ... I have never lived more than 25 miles from the ocean. Don't know how I would do inland.

Did You See Driverless Vehicles on Mountainous Roads in Northern California in the 1950s?

Description : Did You See Driverless Vehicles on Mountainous Roads in Northern California in the 1950s?

Last Answer : What?

How people used to conserve or harvest water in hills and mountainous regions ? -SST 10th

Description : How people used to conserve or harvest water in hills and mountainous regions ? -SST 10th

Last Answer : By building diversion channels like the ‘guts’ or ‘kuls’.

How people used to conserve or harvest water in hills and mountainous regions ? -SST 10th

Description : How people used to conserve or harvest water in hills and mountainous regions ? -SST 10th

Last Answer : By building inundation channels to irrigate their fields.

How do people living in mountainous areas get food?

Description : How do people living in mountainous areas get food?

Last Answer : Some people that live in mountainous areas grow sheep and goats. They trade with others to get other foods.

How do people living in mountainous areas get food and medicine?

Description : How do people living in mountainous areas get food and medicine?

Last Answer : Feel Free to Answer

What Island nation in east Asia is 75 mountainous where numerous natural hazards such as Tsunamis Earthquakes and volcanic eruptions are commonplace?

Description : What Island nation in east Asia is 75 mountainous where numerous natural hazards such as Tsunamis Earthquakes and volcanic eruptions are commonplace?

Last Answer : Indonesia