If cross slope of a country is 10% to 25%, the terrain is classified as (A) Rolling (B) Mountainous (C) Steep (D) Plain

If cross slope of a country is 10% to 25%, the terrain is classified as
(A) Rolling
(B) Mountainous
(C) Steep
(D) Plain
by

1 Answer

Answer :

Answer: Option A
by

Related questions

If the cross slope of a country is 25% to 60%, the terrain is classified as (A) Plain (B) Rolling (C) Steep (D) Mountainous

Description : If the cross slope of a country is 25% to 60%, the terrain is classified as (A) Plain (B) Rolling (C) Steep (D) Mountainous

Last Answer : Answer: Option D

If cross slope of a country is upto 10% the terrain is classified as (A) Plain (B) Rolling (C) Mountainous (D) Steep

Description : If cross slope of a country is upto 10% the terrain is classified as (A) Plain (B) Rolling (C) Mountainous (D) Steep

Last Answer : Answer: Option A

If cross slope of a country is greater than 60%, the terrain is classified as(A) Rolling (B) Mountainous (C) Steep (D) Plain

Description : If cross slope of a country is greater than 60%, the terrain is classified as (A) Rolling (B) Mountainous (C) Steep (D) Plain

Last Answer : Answer: Option C

The minimum design speed of various types of highways in plain terrain is the same as the ruling design speed of (A) Rolling terrain (B) Mountainous terrain (C) Steep terrain (D) None of these

Description : The minimum design speed of various types of highways in plain terrain is the same as the ruling design speed of (A) Rolling terrain (B) Mountainous terrain (C) Steep terrain (D) None of these

Last Answer : Answer: Option A

The normal road width of National and State highways (A) Is kept 45 m (B) In plain and rolling terrain built-up area, is 30 m (C) In mountainous built-up area is 20 m (D) All the above

Description : The normal road width of National and State highways (A) Is kept 45 m (B) In plain and rolling terrain built-up area, is 30 m (C) In mountainous built-up area is 20 m (D) All the above

Last Answer : Answer: Option D

Road width 8.8 m of two lane National highways or State highways in mountainous terrain (A) Excludes the width of parapet (0.6 m) (B) Excludes the width of side drain (0.6 m) (C) Excludes the width of parapet and side drain (D) Includes the width of parapet and side drain

Description : Road width 8.8 m of two lane National highways or State highways in mountainous terrain (A) Excludes the width of parapet (0.6 m) (B) Excludes the width of side drain (0.6 m) (C) Excludes the width of parapet and side drain (D) Includes the width of parapet and side drain

Last Answer : Answer: Option C

The average permissible stress in bond for plain bars in tension is (A) Increased by 10% for bars in compression (B) Increased by 25% for bars in compression (C) Decreased by 10% for bars in compression (D) Decreased by 25% for bars in compression

Description : The average permissible stress in bond for plain bars in tension is (A) Increased by 10% for bars in compression (B) Increased by 25% for bars in compression (C) Decreased by 10% for bars in compression (D) Decreased by 25% for bars in compression

Last Answer : Answer: Option B

In marketing channels, conflict occurs in marketing channels working at same level is classified as A. steep conflict B. slope conflict C. vertical conflict D. horizontal conflict

Description : In marketing channels, conflict occurs in marketing channels working at same level is classified as A. steep conflict B. slope conflict C. vertical conflict D. horizontal conflict

Last Answer : D. horizontal conflict

Determine the terrain sensitivity loss for a 4-GHz carrier that is propagating over a very dry, mountainous area. A. -1.25 dB B. -3.05 dB C. -2.01 dB D. -5.01 dB

Description : Determine the terrain sensitivity loss for a 4-GHz carrier that is propagating over a very dry, mountainous area. A. -1.25 dB B. -3.05 dB C. -2.01 dB D. -5.01 dB

Last Answer : A. -1.25 dB

The minimum super-elevation in rolling terrain in plains, is limited to (A) 4 % (B) 5 % (C) 6 % (D) 7 %

Description : The minimum super-elevation in rolling terrain in plains, is limited to (A) 4 % (B) 5 % (C) 6 % (D) 7 %

Last Answer : Answer: Option D

Bench terraces are constructed in — % land slope area ? a. 10% b. 15% c. 25% d. 20%

Description : Bench terraces are constructed in — % land slope area ? a. 10% b. 15% c. 25% d. 20%

Last Answer : b. 15%

Bench terraces are constructed in — % land slope area ? a. 10% b. 15% c. 25% d. 20%

Description : Bench terraces are constructed in — % land slope area ? a. 10% b. 15% c. 25% d. 20%

Last Answer : b. 15%

A series of closely spaced contour lines represents a (A) Steep slope (B) Gentle slope (C) Uniform slope (D) Plane surface

Description : A series of closely spaced contour lines represents a (A) Steep slope (B) Gentle slope (C) Uniform slope (D) Plane surface

Last Answer : (A) Steep slope

Pick up the correct statement from the following: (A) The throat of the section of a control meter is either rectangular or trapezoidal (B) The floor of the control meter throat is almost level (C) The floor of the expanding outlet of the control meter is given a steep slope (D) All the above

Description : Pick up the correct statement from the following: (A) The throat of the section of a control meter is either rectangular or trapezoidal (B) The floor of the control meter throat is almost level (C) The floor of the expanding outlet of the control meter is given a steep slope (D) All the above

Last Answer : Answer: Option D

A steep escarpment that divides Brazil’s interior from it’s coastal plain formed a barrier to transportation for many years.?

Description : A steep escarpment that divides Brazil’s interior from it’s coastal plain formed a barrier to transportation for many years.?

Last Answer : TRUE

Which of the following is not true with regard to the coastal plains of India ? (a) The west coast has a narrow alluvial margin interspersed by hilly terrain (b) The eastern coast has a wide plain with well-developed deltas of the major rivers (c) The west coast has little indentation except towards the south (d) The west and east coasts, have the same alluvial features

Description : Which of the following is not true with regard to the coastal plains of India ? (a) The west coast has a narrow alluvial margin interspersed by hilly terrain (b) The eastern coast has a ... little indentation except towards the south (d) The west and east coasts, have the same alluvial features

Last Answer : Ans: (d)

How do contour lines show a steep slope?

Description : How do contour lines show a steep slope?

Last Answer : The closer together the lines are - the steeper the slope.

What is a material that accumulates at the bottom of a steep slope?

Description : What is a material that accumulates at the bottom of a steep slope?

Last Answer : The general term for material that falls down and gathers at the foot of a steep cliff or mountain face is scree.

How do contour lines show a steep slope?

Description : How do contour lines show a steep slope?

Last Answer : The closer together the lines are - the steeper the slope.

A steep slope on a phase change graph indicates?

Description : A steep slope on a phase change graph indicates?

Last Answer : Heirhey

_______ is more prevalent in analog signals that have steep slopes or whose amplitudes vary rapidly. A. Peak limiting B. Quantization noise C. Granular noise D. Slope overload

Description : _______ is more prevalent in analog signals that have steep slopes or whose amplitudes vary rapidly. A. Peak limiting B. Quantization noise C. Granular noise D. Slope overload

Last Answer : D. Slope overload

Landslides occur because ofA) Rainfall B) Steep slope C) Deforestation D) All of the above.

Description : Landslides occur because of A) Rainfall B) Steep slope C) Deforestation D) All of the above.

Last Answer : D) All of the above.

What causes convective acceleration in fluid flow? (A) Steep slope in flow (B) Unsteady nature of flow (C) Non-uniformity of flow (D) Turbulence in flow

Description : What causes convective acceleration in fluid flow? (A) Steep slope in flow (B) Unsteady nature of flow (C) Non-uniformity of flow (D) Turbulence in flow

Last Answer : (C) Non-uniformity of flow

A man builds a house rectangular in shape. All sides have southern exposure. A bear walks by the house. What color is the bear? Why? (This one could drive you nuts and should only be attempted by those with high self esteem. If you are seeing a therapist, DO NOT ATTEMPT THIS QUESTION!) ...black...bears are black ...white... ...brown...the house is on a steep slope There is no answer and this is a stupid question.

Description : A man builds a house rectangular in shape. All sides have southern exposure. A bear walks by the house. What color is the bear? Why? (This one could drive you nuts and should only be attempted by those ... ..brown...the house is on a steep slope There is no answer and this is a stupid question.

Last Answer : ..white...

A series of closely spaced contour lines represent a (a) Steep slope* (b) Gentle slope (c) Uniform slope (d) Plane surface

Description : A series of closely spaced contour lines represent a (a) Steep slope* (b) Gentle slope (c) Uniform slope (d) Plane surface

Last Answer : (a) Steep slope*

________are defined as free falling fragments of rocks from steep cliff or slope. (A) Rockfalls (B) Toppling (C) Debris avalanche (D) Earthflow

Description : ________are defined as free falling fragments of rocks from steep cliff or slope. (A) Rockfalls (B) Toppling (C) Debris avalanche (D) Earthflow

Last Answer : (A) Rockfalls  

Which of the following methods of contouring is most suitable for a hilly terrain? (A) Direct method (B) Square method (C) Cross-sections method (D) Tachometric method

Description : Which of the following methods of contouring is most suitable for a hilly terrain? (A) Direct method (B) Square method (C) Cross-sections method (D) Tachometric method

Last Answer : (D) Tachometric method

A four wheel truck or whose operating weight is 12000 kg is pulled along a road having a rising slope of 2% at a uniform speed. Assume grade resistance factor = 10 kg/tonne. The tension in the tow cable is 720 kg. The rolling resistance of the road will be (A) 20 kg/tonne (B) 30 kg/tonne (C) 40 kg/tonne (D) 50 kg/tonne

Description : A four wheel truck or whose operating weight is 12000 kg is pulled along a road having a rising slope of 2% at a uniform speed. Assume grade resistance factor = 10 kg/tonne. The tension in the tow cable is 720 kg. The ... will be (A) 20 kg/tonne (B) 30 kg/tonne (C) 40 kg/tonne (D) 50 kg/tonne

Last Answer : (C) 40 kg/tonne

The bond stress for deformed bars is more than that in plain bars by [ A ] 25% [ B ] 40% [ C ] 60% [ D ] 50%

Description : The bond stress for deformed bars is more than that in plain bars by [ A ] 25% [ B ] 40% [ C ] 60% [ D ] 50%

Last Answer : [ B ] 40%

The bond stress for plain bars in compression is more than that for bars in tension by [ A ] 25% [ B ] 40% [ C ] 60% [ D ] 50%

Description : The bond stress for plain bars in compression is more than that for bars in tension by [ A ] 25% [ B ] 40% [ C ] 60% [ D ] 50%

Last Answer : [ A ] 25%

Reduction of load capacity in a ruling gradient of (A) 1 in 10, is 10% (B) 1 in 15, is 15% (C) 1 in 20, is 10% (D) 1 in 25, is 25%

Description : Reduction of load capacity in a ruling gradient of (A) 1 in 10, is 10% (B) 1 in 15, is 15% (C) 1 in 20, is 10% (D) 1 in 25, is 25%

Last Answer : Answer: Option C

The percentage of water for normal consistency, is (A) 5% to 15% (B) 10% to 25% (C) 15% to 25% (D) 20% to 30%

Description : The percentage of water for normal consistency, is (A) 5% to 15% (B) 10% to 25% (C) 15% to 25% (D) 20% to 30%

Last Answer : Answer: Option C

The strength of concrete using air entraining cement gets reduced by (a) 5 to 10% (b) 10 to 15% (c) 15 to 20% (d) 20 to 25%

Description : The strength of concrete using air entraining cement gets reduced by (a) 5 to 10% (b) 10 to 15% (c) 15 to 20% (d) 20 to 25%

Last Answer : (b) 10 to 15%

By over-reinforcing a beam, the moment of resistance can be increased not more than [ A ] 10% [ B ] 15% [ C ] 25% [ D ] 50%

Description : By over-reinforcing a beam, the moment of resistance can be increased not more than [ A ] 10% [ B ] 15% [ C ] 25% [ D ] 50%

Last Answer : [ C ] 25%

For rolling mark 60 kg/Sail/X/2010 the first testing in the field after initial testing of rails in rail manufacturing plant, will be done. (i) After test free period of 25%. (ii) After passage of every 40 GMT traffic during test free period.* (iii) After passage of 200 GMT. (iv) On the basis of annual GMT of the section.

Description : For rolling mark 60 kg/Sail/X/2010 the first testing in the field after initial testing of rails in rail manufacturing plant, will be done. (i) After test free period of 25%. (ii) After passage of every 40 ... period.* (iii) After passage of 200 GMT. (iv) On the basis of annual GMT of the section.

Last Answer : (ii) After passage of every 40 GMT traffic during test free period.*

Minimum reinforcement in slabs, when High yield strength deformed bars [ A ] 0.12% of gross cross sectional area [ B ] 0.15% of gross cross sectional area [ C ] 0.20% of gross cross sectional area [ D ] 0.25% of gross cross sectional area.

Description : Minimum reinforcement in slabs, when High yield strength deformed bars [ A ] 0.12% of gross cross sectional area [ B ] 0.15% of gross cross sectional area [ C ] 0.20% of gross cross sectional area [ D ] 0.25% of gross cross sectional area.

Last Answer : [ A ] 0.12% of gross cross sectional area

The Minimum percentage of secondary steel in slabs for Fe- 415 grade steel should be __________ of Gross cross-section area [ A ] 0.12% [ B ] 0.15% [ C ] 0.20% [ D ] 0.25%

Description : The Minimum percentage of secondary steel in slabs for Fe- 415 grade steel should be __________ of Gross cross-section area [ A ] 0.12% [ B ] 0.15% [ C ] 0.20% [ D ] 0.25%

Last Answer : [ A ] 0.12%

Subtense tacheometry is generally preferred to if ground is (A) Flat (B) Undulating (C) Mountainous (D) Deserts

Description : Subtense tacheometry is generally preferred to if ground is  (A) Flat  (B) Undulating  (C) Mountainous  (D) Deserts 

Last Answer : (B) Undulating 

Hydrographic surveys deal with the mapping of (A) Large water bodies (B) Heavenly bodies (C) Mountainous region (D) Canal system

Description : Hydrographic surveys deal with the mapping of (A) Large water bodies (B) Heavenly bodies (C) Mountainous region (D) Canal system

Last Answer : (A) Large water bodies

In high mountainous region, the type of roof generally recommended for buildings, is (A) Shed type (B) Gable type (C) Gambrel type (D) Mansard type

Description : In high mountainous region, the type of roof generally recommended for buildings, is (A) Shed type (B) Gable type (C) Gambrel type (D) Mansard type

Last Answer : Option C

Within the red blood cells the buffering capacity contributed by the phosphates is (A) 5% (B) 10% (C) 20% (D) 25%

Description : Within the red blood cells the buffering capacity contributed by the phosphates is (A) 5% (B) 10% (C) 20% (D) 25%

Last Answer : Answer : D

Accumulators should have adequate volume to store refrigerant charge at least (a) 10% (b) 25% (c) 50% (d) 75%

Description : Accumulators should have adequate volume to store refrigerant charge at least (a) 10% (b) 25% (c) 50% (d) 75%

Last Answer : Ans: c

_______ percentage of Payment Bank‟s branches must be in the unbanked rural area. A. 25% B. 10% C. 15% D. 20% E. None of the Above

Description : _______ percentage of Payment Bank‟s branches must be in the unbanked rural area. A. 25% B. 10% C. 15% D. 20% E. None of the Above

Last Answer : A. 25% Explanation: 25% of Payment Bank‘s branches must be in the unbanked rural area.

Gunmetal and bronze are not corroded by the action of (A) Wet chlorine (B) Synthetic detergent solution (C) Hydrochloric acid (10%) (D) Nitric acid (< 25%

Description : Gunmetal and bronze are not corroded by the action of (A) Wet chlorine (B) Synthetic detergent solution (C) Hydrochloric acid (10%) (D) Nitric acid (< 25%

Last Answer : (B) Synthetic detergent solution

When estimating project time schedules using industry standards for a systems project, the following values are acceptable: 15% for planning, 25% for analysis, 50% for design, and 10% for implementation.

Description : When estimating project time schedules using industry standards for a systems project,  the following values are acceptable: 15% for planning, 25% for analysis, 50% for design,  and 10% for implementation.

Last Answer : Ans: False

A multiple effect evaporator has a capacity to process 4000 kg of solid caustic soda per day, when it is concentrating from 10% to 25% solids. The water evaporated in kg per day is (A) 6000 (B) 24000 (C) 60000 (D) 48000

Description : A multiple effect evaporator has a capacity to process 4000 kg of solid caustic soda per day, when it is concentrating from 10% to 25% solids. The water evaporated in kg per day is (A) 6000 (B) 24000 (C) 60000 (D) 48000

Last Answer : (B) 24000

The minimum number of bags which a UBO will be authorised to keep will generally be equal to the number of bags required for despatch for the day plus: (A) 10% (B) 20% (C) 25% (D) 50%

Description : The minimum number of bags which a UBO will be authorised to keep will generally be equal to the number of bags required for despatch for the day plus: (A) 10% (B) 20% (C) 25% (D) 50%

Last Answer : (A) 10%

Which of the following would require least amount of secondary air for combustion? (A) Coke breeze containing 25% ash and 2% volatile matter (B) Anthracite containing 10% volatile matter and 8% ash(C) Bituminous coal containing 20% ash and 25% volatile matter(D) Semi-bituminous coal containing 25% ash and 20% volatile matter

Description : Which of the following would require least amount of secondary air for combustion? (A) Coke breeze containing 25% ash and 2% volatile matter (B) Anthracite containing 10% volatile matter and 8% ash ... ash and 25% volatile matter (D) Semi-bituminous coal containing 25% ash and 20% volatile matter

Last Answer : (A) Coke breeze containing 25% ash and 2% volatile matter

What percentage of the human genome is identical to the yeast genome? a. 5% b. 10% c. 25% d. 50%

Description : What percentage of the human genome is identical to the yeast genome? a. 5% b. 10% c. 25% d. 50%

Last Answer : c. 25%