In tangential tacheometry, an ordinary level staff is used (A) Leaning towards the instrument for inclined sights upward (B) Leaning away from the instrument for inclined sights downwards (C) Vertical in all cases (D) None of these

In tangential tacheometry, an ordinary level staff is used
(A) Leaning towards the instrument for inclined sights upward
(B) Leaning away from the instrument for inclined sights downwards
(C) Vertical in all cases
(D) None of these
by

1 Answer

Answer :

(C) Vertical in all cases
by

Related questions

A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff readings at and were 1.22 and 1.06. With the level set up at , the readings at and were 1.55 and 1.37. The collimation error per 100 m length of sight is (A) 0.02 m inclined upwards (B) 0.04 m inclined downwards (C) 0.04 m inclined upward (D) None of these

Description : A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff  readings at and were 1.22 and 1.06. With the level set up at , the readings at  and were 1.55 and ... upwards  (B) 0.04 m inclined downwards  (C) 0.04 m inclined upward  (D) None of these

Last Answer : (B) 0.04 m inclined downwards 

On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be (A) Towards the wall at its upper end (B) Away from the wall at its upper end (C) Upwards at its upper end (D) Downwards at its upper end

Description : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be (A) Towards the wall at its upper end (B) Away from the wall at its upper end (C) Upwards at its upper end (D) Downwards at its upper end

Last Answer : (C) Upwards at its upper end

If vertical angles of inclined sights do not exceed 10° and non-verticality of the staff remains within 1°, stadia system of tacheometric observations are made on (A) Staff normal (B) Staff vertical (C) Staff normal as well as vertical (D) None of these

Description : If vertical angles of inclined sights do not exceed 10° and non-verticality of the staff remains within 1°, stadia system of tacheometric observations are made on (A) Staff normal (B) Staff vertical (C) Staff normal as well as vertical (D) None of these

Last Answer : (A) Staff normal

Tilt of the staff in stadia tacheometry increases the intercept if it is (A) Away from the telescope pointing down hill (B) Towards the telescope pointing up-hill (C) Away from the telescope pointing up-hill (D) None of these

Description : Tilt of the staff in stadia tacheometry increases the intercept if it is (A) Away from the telescope pointing down hill (B) Towards the telescope pointing up-hill (C) Away from the telescope pointing up-hill (D) None of these

Last Answer : (C) Away from the telescope pointing up-hill

If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these

Description : If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these

Last Answer : (A) Horizontal sights

On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be (A) Downwards at its upper end (B) Upwards at its upper end (C) Perpendicular to the wall at its upper end (D) Zero at its upper end

Description : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of  friction will be  (A) Downwards at its upper end  (B) Upwards at its upper end  (C) Perpendicular to the wall at its upper end  (D) Zero at its upper end 

Last Answer : (D) Zero at its upper end 

A failure wedge develops if a retaining wall (A) Moves away from the backfill (B) Moves towards the backfill (C) Sinks downwards (D) Stresses equally by vertical and horizontal forces

Description : A failure wedge develops if a retaining wall (A) Moves away from the backfill (B) Moves towards the backfill (C) Sinks downwards (D) Stresses equally by vertical and horizontal forces

Last Answer : Answer: Option A

In horizontal angles, the error due to imperfect levelling of the plate bubble is (A) Large when sights are nearly level (B) Large for long sights (C) Less for steeply inclined sights (D) Large for steeply inclined sights

Description : In horizontal angles, the error due to imperfect levelling of the plate bubble is (A) Large when sights are nearly level (B) Large for long sights (C) Less for steeply inclined sights (D) Large for steeply inclined sights

Last Answer : (D) Large for steeply inclined sights

The subtense tacheometry method is adopted when the ground is (a) Flat (b) Inclined (c) Undulating (d) A waterbody

Description : The subtense tacheometry method is adopted when the ground is (a) Flat (b) Inclined (c) Undulating (d) A waterbody

Last Answer : (a) Flat

Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made vertically downwards from a horizontal plane (C) The horizontal plane with reference to which staff readings are taken, coincides with the level surface through the telescope axis (D) All the above

Description : Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made ... readings are taken, coincides with the level surface through the telescope axis (D) All the above

Last Answer : (D) All the above

A stilling well is required when the stage measurement is made by employing : a) Bubble gauge b) Float gauge recorder c) Vertical staff gauge d) Inclined staff gauge

Description : A stilling well is required when the stage measurement is made by employing : a) Bubble gauge b) Float gauge recorder c) Vertical staff gauge d) Inclined staff gauge

Last Answer : b) Float gauge recorder

The locus of the end point of the resultant of the normal and tangential components of the stress on an inclined plane, is (A) Circle (B) Parabola (C) Ellipse (D) Straight line

Description : The locus of the end point of the resultant of the normal and tangential components of the stress  on an inclined plane, is  (A) Circle  (B) Parabola  (C) Ellipse  (D) Straight line 

Last Answer : (C) Ellipse 

In order to measure the flow with a Venturimeter, it is installed in (A) Horizontal line (B) Inclined line with flow upwards (C) Inclined line with flow downwards (D) Any direction and in any location

Description : In order to measure the flow with a Venturimeter, it is installed in (A) Horizontal line (B) Inclined line with flow upwards (C) Inclined line with flow downwards (D) Any direction and in any location

Last Answer : Answer: Option D

The branch of surveying in which both horizontal and vertical positions of a point, are determined by making instrumental observations, is known (A) Tacheometry (B) Tachemetry (C) Telemetry (D) All the above

Description : The branch of surveying in which both horizontal and vertical positions of a point, are determined by making instrumental observations, is known (A) Tacheometry (B) Tachemetry (C) Telemetry (D) All the above

Last Answer : (D) All the above

In which of the following cases, it is possible for flow to occur from low pressure to high pressure? (A) Flow of liquid upward in a vertical pipe (B) Flow through a converging section (C) Flow of air downward in a pipe (D) Impossible in a constant cross-section conduit

Description : In which of the following cases, it is possible for flow to occur from low pressure to high pressure? (A) Flow of liquid upward in a vertical pipe (B) Flow through a converging section (C) Flow of air downward in a pipe (D) Impossible in a constant cross-section conduit

Last Answer : (B) Flow through a converging section

Normally the isoquant slopes (a) downwards from left to right (b) upward from right to left © upwards from left to right (d) backwards from left to right

Description : Normally the isoquant slopes (a) downwards from left to right (b) upward from right to left © upwards from left to right (d) backwards from left to right

Last Answer : (a) downwards from left to right

In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Description : In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Last Answer : (b) Resection

The intercept of a staff (A) Is maximum if the staff is held truly normal to the line of sight (B) Is minimum if the staff is held truly normal to the line of sight (C) Decreases if the staff is tilted away from normal (D) Increases if the staff is tilted towards normal

Description : The intercept of a staff (A) Is maximum if the staff is held truly normal to the line of sight (B) Is minimum if the staff is held truly normal to the line of sight (C) Decreases if the staff is tilted away from normal (D) Increases if the staff is tilted towards normal

Last Answer : (B) Is minimum if the staff is held truly normal to the line of sight

Accurate measurement of deflection angles with a transit not properly adjusted may be made by (A) Setting the Vernier A at zero at back station and then plunging the telescope (B) Setting the Vernier A at zero at back station and turning the instrument to the forward station (C) Taking two back sights one with the telescope normal and the other with telescope inverted (D) None of these

Description : Accurate measurement of deflection angles with a transit not properly adjusted may be made by (A) Setting the Vernier A at zero at back station and then plunging the telescope (B) Setting the ... back sights one with the telescope normal and the other with telescope inverted (D) None of these

Last Answer : (C) Taking two back sights one with the telescope normal and the other with telescope inverted

While working on a plane table, the correct rule is: (A) Draw continuous lines from all instrument stations (B) Draw short rays sufficient to contain the points sought (C) Intersection should be obtained by actually drawing second rays (D) Take maximum number of sights as possible from each station to distant objects

Description : While working on a plane table, the correct rule is: (A) Draw continuous lines from all instrument stations (B) Draw short rays sufficient to contain the points sought (C) Intersection ... drawing second rays (D) Take maximum number of sights as possible from each station to distant objects

Last Answer : (B) Draw short rays sufficient to contain the points sought

A block P released from the top of a smooth inclined plane slides down the plane. Another block Q is dropped from the same point and falls vertically downwards. Which one of the following statements will be true if the friction offered by air is negligible? (a) Both blocks will reach the ground at the same time (b) Block P will reach the ground earlier than block Q (c) Both blocks will reach the ground with the same speed (d) Block Q will reach the ground with a higher speed than block P

Description : A block P released from the top of a smooth inclined plane slides down the plane. Another block Q is dropped from the same point and falls vertically downwards. Which one of the following statements will be ... with the same speed (d) Block Q will reach the ground with a higher speed than block P

Last Answer : Ans:(c)

The dew point temperature lines on psychrometric charts are straight inclined sloping downwards to the right. When relative humidity of moist air is 100%, then (A) Wet bulb temperature=dry bulb temperature (B) Wet bulb temperature=dew point temperature (C) Saturation temperature=dew point temperature (D) All 'a', 'b' & 'c

Description : The dew point temperature lines on psychrometric charts are straight inclined sloping downwards to the right. When relative humidity of moist air is 100%, then (A) Wet bulb temperature=dry bulb temperature (B) ... temperature (C) Saturation temperature=dew point temperature (D) All 'a', 'b' & 'c

Last Answer : Option D

Which one of the following statements is not correc t? (a) Parallax error is eliminated when there is no change in the staff reading when eye is moved up and down (b) The objective lens is to be focused towards a white or bright background for clear visibility of cross-hairs (c) Temporary adjustments of the dumpy level are to be performed at every set up (d) The eyepiece need not be adjusted after the first set up when the same surveyor is taking readings

Description : Which one of the following statements is not correc t? (a) Parallax error is eliminated when there is no change in the staff reading when eye is moved up and down (b) The objective lens is ... (d) The eyepiece need not be adjusted after the first set up when the same surveyor is taking readings

Last Answer : (b) The objective lens is to be focused towards a white or bright background for clear visibility of cross-hairs

A back sight (A) Is always taken on a point of known elevation or can be computed (B) Is added to the known level to obtain the instrument height (C) Taken on an inverted staff is treated as negative (D) All the above

Description : A back sight  (A) Is always taken on a point of known elevation or can be computed  (B) Is added to the known level to obtain the instrument height  (C) Taken on an inverted staff is treated as negative  (D) All the above 

Last Answer : (D) All the above 

While viewing through a level telescope and moving the eye slightly, a relative movement occurs between the image of the levelling staff and the cross hairs. The instrument is (A) Correctly focussed (B) Not correctly focussed (C) Said to have parallax (D) Free from parallax

Description : While viewing through a level telescope and moving the eye slightly, a relative movement occurs between the image of the levelling staff and the cross hairs. The instrument is (A) Correctly focussed (B) Not correctly focussed (C) Said to have parallax (D) Free from parallax

Last Answer : (C) Said to have parallax

Pick up the correct statement from the following: (A) An observation or the resulting reading with the level on a levelling staff is called sight (B) A back sight is the first sight taken after setting up the instrument in any position (C) The first sight on each change point is a fore sight (D) All the above

Description : Pick up the correct statement from the following: (A) An observation or the resulting reading with the level on a levelling staff is called sight (B) A back sight is the first sight taken after setting up ... position (C) The first sight on each change point is a fore sight (D) All the above

Last Answer : (D) All the above

The vertical flow of communication from lower level to one or more higher levels is _____________. (a) Upward communication ; (b) Downward communication ; (c) Formal Communication (d) Horizontal communication

Description : The vertical flow of communication from lower level to one or more higher levels is _____________. (a) Upward communication ; (b) Downward communication ; (c) Formal Communication (d) Horizontal communication 

Last Answer : (a) Upward communication ; 

The deficiency in rain catch due to vertical acceleration of air forced upward over the gauge, is (A) Greater for heavy rain (B) Greater for lighter rain (C) Greater for large drops (D) Lesser for small rain drops

Description : The deficiency in rain catch due to vertical acceleration of air forced upward over the gauge, is (A) Greater for heavy rain (B) Greater for lighter rain (C) Greater for large drops (D) Lesser for small rain drops

Last Answer : Answer: Option B

Metacentre is the point of intersection of (A) Vertical upward force through e.g. of body and center line of body (B) Buoyant force and the center line of body (C) Midpoint between e.g. and center of buoyancy (D) All of the above

Description : Metacentre is the point of intersection of (A) Vertical upward force through e.g. of body and center line of body (B) Buoyant force and the center line of body (C) Midpoint between e.g. and center of buoyancy (D) All of the above

Last Answer : Answer: Option B

So, who are you guys leaning towards in the upcoming presidential elections, and why?

Description : So, who are you guys leaning towards in the upcoming presidential elections, and why?

Last Answer : Bernie Sanders. Because his positions most resemble mine.

This summer I am enrolled in an independent study (very small - one credit) and I am leaning towards studying prisons systems - where to start?

Description : This summer I am enrolled in an independent study (very small - one credit) and I am leaning towards studying prisons systems - where to start?

Last Answer : Stuff by Mumia Abu Jamal (in prison currently), Angela Davis, and Michelle Alexander.

Looking for GPS and leaning towards Garmin?

Description : Looking for GPS and leaning towards Garmin?

Last Answer : answer:I dont have experience with those models, but I have a garmin nuvi 100. I absolutely love it. I’ve never used a magellan gps, but my girlfriend had a TomTom. We both liked the garmin much better.

When an electron is moving horizontally between oppositely charged plates, it will move in the A. straight line B. fall directly downwards C. move towards positive plates D. curved path

Description : When an electron is moving horizontally between oppositely charged plates, it will move in the A. straight line B. fall directly downwards C. move towards positive plates D. curved path

Last Answer : curved path

The total change in level along the line is equal to total back sights (A) Minus total fore sights (B) The total rises minus total falls (C) The reduced level of last point minus reduced level of the first point (D) All the above

Description : The total change in level along the line is equal to total back sights  (A) Minus total fore sights  (B) The total rises minus total falls  (C) The reduced level of last point minus reduced level of the first point  (D) All the above 

Last Answer : (D) All the above 

Which component of the electric field intensity is always continuous at the boundary? a) Tangential b) Normal c) Horizontal d) Vertical

Description : Which component of the electric field intensity is always continuous at the boundary? a) Tangential b) Normal c) Horizontal d) Vertical

Last Answer : a) Tangential

Pulverised fuel fired furnaces employ __________ fuel firing. (A) Horizontal (B) Vertical (C) Tangential (D) All (A), (B) and (C)

Description : Pulverised fuel fired furnaces employ __________ fuel firing. (A) Horizontal (B) Vertical (C) Tangential (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The Leaning Tower of Pisa does not fall because (a) It is tapered at the top (b) It covers a large base area (c) Its centre of gravity remains at the lowest position (d) The vertical line through the centre of gravity of the tower falls within its base

Description : The Leaning Tower of Pisa does not fall because (a) It is tapered at the top (b) It covers a large base area (c) Its centre of gravity remains at the lowest position (d) The vertical line through the centre of gravity of the tower falls within its base

Last Answer : Ans:(d)

On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be?

Description : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be?

Last Answer : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be zero at its upper end.

On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be?

Description : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be?

Last Answer : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be upwards at its upper end.

In psychrometric chart, dew point temperature lines are A. horizontal B. vertical C. curved D. straight lines slopping downwards to the right

Description : In psychrometric chart, dew point temperature lines are A. horizontal B. vertical C. curved D. straight lines slopping downwards to the right

Last Answer : ANSWER : A

Dry saturated steam can be converted into superheated steam by (A) Increasing its cross-sectional area of flow (B) Passing it through a pressure reducing valve (C) Forcing it downwards through a vertical tube (D) None of these

Description : Dry saturated steam can be converted into superheated steam by (A) Increasing its cross-sectional area of flow (B) Passing it through a pressure reducing valve (C) Forcing it downwards through a vertical tube (D) None of these

Last Answer : (B) Passing it through a pressure reducing valve

lf the wire which is vertical to this page has electron flow downwards the conductor will have

Description : lf the wire which is vertical to this page has electron flow downwards the conductor will have

Last Answer : lf the wire which is vertical to this page has electron flow downwards the conductor will have a counter-clockwise field in the plane of the paper

Subtense tacheometry is generally preferred to if ground is (A) Flat (B) Undulating (C) Mountainous (D) Deserts

Description : Subtense tacheometry is generally preferred to if ground is  (A) Flat  (B) Undulating  (C) Mountainous  (D) Deserts 

Last Answer : (B) Undulating 

Greater accuracy in linear measurements, is obtained by (A) Tacheometry (B) Direct chaining (C) Direct taping (D) All the above

Description : Greater accuracy in linear measurements, is obtained by (A) Tacheometry (B) Direct chaining (C) Direct taping (D) All the above

Last Answer : (C) Direct taping

In a constant level tube, size of the bubble remains constant because upper wall is (A) Of relatively larger radius (B) Of relatively smaller radius (C) Flat (D) Convex downwards

Description : In a constant level tube, size of the bubble remains constant because upper wall is (A) Of relatively larger radius (B) Of relatively smaller radius (C) Flat (D) Convex downwards

Last Answer : (A) Of relatively larger radius

Contours of different elevations may cross each other only in the case of (A) An overhanging cliff (B) A vertical cliff (C) A saddle (D) An inclined plane

Description : Contours of different elevations may cross each other only in the case of (A) An overhanging cliff (B) A vertical cliff (C) A saddle (D) An inclined plane

Last Answer : (A) An overhanging cliff

In non-cohesive soil in passive state of plastic equilibrium (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to the horizontal

Description : In non-cohesive soil in passive state of plastic equilibrium (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to the horizontal

Last Answer : (B) Minor principal stress is vertical

A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant active earth pressure will act at a distance of 2 m above the base and inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Description : A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant ... inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Last Answer : (C) 12°

A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of internal friction for the soil are respectively (A) 0.5 N/mm² and 30° (B) 0.05 N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Description : A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of ... N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Last Answer : Answer: Option B

In active state of plastic equilibrium in a non cohesive soil with horizontal ground surface (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to horizontal

Description : In active state of plastic equilibrium in a non cohesive soil with horizontal ground surface (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to horizontal

Last Answer : Answer: Option C