For the movement of vehicles at an intersection of two roads, without any interference, the type of grade separator generally preferred to, is (A) Delta (B) Trumpet (C) Diamond interchange (D) Clover leaf

For the movement of vehicles at an intersection of two roads, without any interference, the type
of grade separator generally preferred to, is
(A) Delta
(B) Trumpet
(C) Diamond interchange
(D) Clover leaf
by

1 Answer

Answer :

Answer: Option D
by

Related questions

At intersection of roads, the traffic volume study is carried out to ascertain the number of vehicles (A) Moving along straights (B) Turning left (C) Turning right (D) All the above

Description : At intersection of roads, the traffic volume study is carried out to ascertain the number of vehicles (A) Moving along straights (B) Turning left (C) Turning right (D) All the above

Last Answer : Answer: Option D

Shoulders for high traffic volume roads, should (A) Be stable throughout the year to be used by vehicles in the case of emergency (B) Support and protect the ends of carriage ways (C) Not allow entrance of water to sub-grade (D) All the above

Description : Shoulders for high traffic volume roads, should (A) Be stable throughout the year to be used by vehicles in the case of emergency (B) Support and protect the ends of carriage ways (C) Not allow entrance of water to sub-grade (D) All the above

Last Answer : Answer: Option D

If C is basic capacity per lane, V is velocity in km/hour, S is stopping distance plus length of the vehicles in metres, the formula C = 1000V/S is applicable to (A) District roads (B) Two lane roads (C) Two lane roads in one direction (D) None of these

Description : If C is basic capacity per lane, V is velocity in km/hour, S is stopping distance plus length of the vehicles in metres, the formula C = 1000V/S is applicable to (A) District roads (B) Two lane roads (C) Two lane roads in one direction (D) None of these

Last Answer : Answer: Option C

On most smooth hard surfaced roads, rolling resistance to moving vehicles, ranges from (A) 5 kg to 7 kg/tonne (B) 7 kg to 9 kg/tonne (C) 9 kg to 11 kg/tonne (D) 11 kg to 13 kg/tonne

Description : On most smooth hard surfaced roads, rolling resistance to moving vehicles, ranges from (A) 5 kg to 7 kg/tonne (B) 7 kg to 9 kg/tonne (C) 9 kg to 11 kg/tonne (D) 11 kg to 13 kg/tonne

Last Answer : Answer: Option C

Pick up the incorrect statement from the following. The super-elevation on roads is (A) Directly proportional to width of pavement (B) Directly proportional to velocity of vehicles (C) Inversely proportional to acceleration due to gravity (D) Inversely proportional to the radius of curvature

Description : Pick up the incorrect statement from the following. The super-elevation on roads is (A) Directly proportional to width of pavement (B) Directly proportional to velocity of vehicles (C) Inversely proportional to acceleration due to gravity (D) Inversely proportional to the radius of curvature

Last Answer : Answer: Option B

Driving vehicles on wet surfaced roads, is dangerous because it may (A) Skid (B) Slip (C) Overturn (D) All the above

Description : Driving vehicles on wet surfaced roads, is dangerous because it may (A) Skid (B) Slip (C) Overturn (D) All the above

Last Answer : Answer: Option B

The advantage of providing super-elevation on roads, is (A) Higher speed of vehicles (B) Increased volume of traffic (C) Reduced maintenance cost of the roads (D) All the above

Description : The advantage of providing super-elevation on roads, is (A) Higher speed of vehicles (B) Increased volume of traffic (C) Reduced maintenance cost of the roads (D) All the above

Last Answer : Answer: Option D

To prevent a head-on-collision of vehicles travelling in opposite directions along four-lane roads (A) Markings on the road are provided (B) Physical dividers are provided (C) Area dividers are provided (D) Medians of wide area are provided

Description : To prevent a head-on-collision of vehicles travelling in opposite directions along four-lane roads (A) Markings on the road are provided (B) Physical dividers are provided (C) Area dividers are provided (D) Medians of wide area are provided

Last Answer : Answer: Option D

A traffic rotary is justified where (A) Number of intersecting roads is between 4 and 7 (B) Space is limited and costly (C) When traffic volume is less than 500 vehicles per hour (D) When traffic volume is more than 5000 vehicles per hour

Description : A traffic rotary is justified where (A) Number of intersecting roads is between 4 and 7 (B) Space is limited and costly (C) When traffic volume is less than 500 vehicles per hour (D) When traffic volume is more than 5000 vehicles per hour

Last Answer : Answer: Option A

One four-leaf clover in 10,000? I wonder who made the count?

Description : One four-leaf clover in 10,000? I wonder who made the count?

Last Answer : Soon you’ll find 10,000 in 10,000 >>>.

How good of a 4-leaf clover finder are you?

Description : How good of a 4-leaf clover finder are you?

Last Answer : I have to admit, I have never found a four-leaf clover. I remember looking many times when I was a little girl, but always came up unsuccessful. I even use to glue on a 4th leaf to tease my younger ... in a small ziploc bag and place in a book in a book store. Thanks for the fun question - LB

Have you ever found a four-leaf clover?

Description : Have you ever found a four-leaf clover?

Last Answer : Yep

How can you keep a four leaf clover?

Description : How can you keep a four leaf clover?

Last Answer : I have four leafed clovers in a fish tank doing very well

Why should you never iron a 4-leaf clover? -Riddles

Description : Why should you never iron a 4-leaf clover? -Riddles

Last Answer : You don't want to press your luck!

How to look for a four-leaf clover

Description : Is it even possible to just find a four-leaf clover? I've been looking for him for several days, but only trefoils.

Last Answer : you have to watch carefully and you will definitely come across one in time.

What’s the difference between a four-leaf clover and a shamrock?

Description : What’s the difference between a four-leaf clover and a shamrock?

Last Answer : I guess I get where this can be confusing, because both are clovers, but it’s pretty clear: A shamrock has three leaves, and a four-leaf clover has, well, four.Though there are around 300 species ... Four-leaf clovers, on the other hand, are just freaks of nature in those same species of clover.

tRNA has (A) Clover leaf structure (B) anticodon arm (C) poly ‘A’ tay 3’ (D) Cap at 5’ end

Description : tRNA has (A) Clover leaf structure (B) anticodon arm (C) poly ‘A’ tay 3’ (D) Cap at 5’ end

Last Answer : Answer : A

The structure of tRNA appears like a (A) Helix (B) Hair pin (C) Clover leaf (D) Coil

Description : The structure of tRNA appears like a (A) Helix (B) Hair pin (C) Clover leaf (D) Coil

Last Answer : Answer : C

Which form of RNA has a structure resembling clover leaf? (a) rRNA (b) hnRNA (c) mRNA (d) tRNA

Description : Which form of RNA has a structure resembling clover leaf? (a) rRNA (b) hnRNA (c) mRNA (d) tRNA

Last Answer : (c) mRNA

Which form of RNA has a structure resembling clover leaf? (a) rRNA (b) hnRNA (c) mRNA (d) tRNA

Description : Which form of RNA has a structure resembling clover leaf? (a) rRNA (b) hnRNA (c) mRNA (d) tRNA

Last Answer : tRNA

How to Find a Four Leaf Clover

Description : How to Find a Four Leaf Clover

Last Answer : How to Find a Four Leaf Clover A four leaf clover is associated with good luck, particularly because it is rare and hard to find. A clover with four leaves is actually considered a genetic defect, ... it! You can learn more about preserving plants and flowers in this article: How to Dry Flowers.

An exceptional grade may be provided upto 1 in 12 along hill roads, if the length does not exceed (A) 45 m per km(B) 60 m per km (C) 75 m per km (D) 90 m per km

Description : An exceptional grade may be provided upto 1 in 12 along hill roads, if the length does not exceed (A) 45 m per km (B) 60 m per km (C) 75 m per km (D) 90 m per km

Last Answer : Answer: Option B

When a driver stops at an intersection because traffic is backed up, German law requires the driver to leave enough space for vehicles on the intersecting street to clear the intersection.?

Description : When a driver stops at an intersection because traffic is backed up, German law requires the driver to leave enough space for vehicles on the intersecting street to clear the intersection.?

Last Answer : This isn't really a question. Just a statement. It makes sense to not block the intersection when there's traffic. I hate when people do that.

The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Last Answer : (A) Chain surveying

To orient a plane table at a point with two inaccessible points, the method generally adopted, is (A) Intersection (B) Resection (C) Radiation (D) Two point problem

Description : To orient a plane table at a point with two inaccessible points, the method generally adopted, is (A) Intersection (B) Resection (C) Radiation (D) Two point problem

Last Answer : (D) Two point problem

The dock wall is designed as a gravity retaining wall and is tested for (A) Back fill pressure when the dock is empty (B) Maximum water pressure from the dock without any back fill (C) The load charge transmitted to the dock by the movement of loaded vehicles or trains on the way (D) All of the abov

Description : The dock wall is designed as a gravity retaining wall and is tested for (A) Back fill pressure when the dock is empty (B) Maximum water pressure from the dock without any back fill (C) The load charge ... to the dock by the movement of loaded vehicles or trains on the way (D) All of the above

Last Answer : (D) All of the above

The type of transition curves generally provided on hill roads, is (A) Circular (B) Cubic parabola (C) Lemniscate (D) Spiral

Description : The type of transition curves generally provided on hill roads, is (A) Circular (B) Cubic parabola (C) Lemniscate (D) Spiral

Last Answer : Answer: Option D

Following type of pavement is generally known as flexible pavement (A) Water-bound macadam roads (B) Stabilised soil roads (C) Road constructed with various layers of building material well compacted (D) All the above

Description : Following type of pavement is generally known as flexible pavement (A) Water-bound macadam roads (B) Stabilised soil roads (C) Road constructed with various layers of building material well compacted (D) All the above

Last Answer : Answer: Option D

For high grade instruments the steel preferred to, is (A) Cast steel (B) Bessemer steel (C) Mild steel (D) Whitworth compressed steel

Description : For high grade instruments the steel preferred to, is (A) Cast steel (B) Bessemer steel (C) Mild steel (D) Whitworth compressed steel

Last Answer : Answer: Option A

Did You See Driverless Vehicles on Mountainous Roads in Northern California in the 1950s?

Description : Did You See Driverless Vehicles on Mountainous Roads in Northern California in the 1950s?

Last Answer : What?

Do you see a day where autonomous vehicles will be the only vehicles on the roads?

Description : Do you see a day where autonomous vehicles will be the only vehicles on the roads?

Last Answer : Some claim that it will eliminate the need for transport drivers, wishful thinking but I have been in the industry way to long to see that happening , one example would be say a ... babysit this wonderful technology,and protect the load in cases of breakdowns.(and there will be breakdowns)

The sparkling of a diamond is due to – (1) total internal reflection of light (2) interference of light (3) polarisation of light (4) refraction of light

Description : The sparkling of a diamond is due to – (1) total internal reflection of light (2) interference of light (3) polarisation of light (4) refraction of light

Last Answer : (1) total internal reflection of light Explanation: Diamonds sparkle because of the total internal reflection of light. Diamonds have a very high refractive index, meaning they slow light down much more ... so that light seems to get 'trapped' within the diamond giving it it's sparkly appearance.

The sparkling of a diamond is due to (1) total internal reflection of light (2) interference of light (3) polarisation of light (4) refraction of light

Description : The sparkling of a diamond is due to (1) total internal reflection of light (2) interference of light (3) polarisation of light (4) refraction of light

Last Answer : total internal reflection of light

Super-elevation on roads in snow bound areas, should generally not exceed (A) 15 % (B) 12 % (C) 10 % (D) 7 %

Description : Super-elevation on roads in snow bound areas, should generally not exceed (A) 15 % (B) 12 % (C) 10 % (D) 7 %

Last Answer : Answer: Option D

On concrete roads, the camber generally provided, is (A) 1 in 20 to 1 in 24 (B) 1 in 30 to 1 in 48 (C) 1 in 36 to 1 in 48 (D) 1 in 60 to 1 in 72

Description : On concrete roads, the camber generally provided, is (A) 1 in 20 to 1 in 24 (B) 1 in 30 to 1 in 48 (C) 1 in 36 to 1 in 48 (D) 1 in 60 to 1 in 72

Last Answer : Answer: Option D

Construction joints are generally provided in concrete (A) Roads (B) Retaining walls (C) Lining of canals (D) All the above

Description : Construction joints are generally provided in concrete (A) Roads (B) Retaining walls (C) Lining of canals (D) All the above

Last Answer : Answer: Option D

With a leaf spring type of suspension, interference between steering and suspension system can be (a) front end of the spring is pin joined and the rear end is shackled (b) front end of the spring is shackled and the rear end is pin joined (c) both end of the spring are shackled (d) both end of the spring are pin joined

Description : With a leaf spring type of suspension, interference between steering and suspension system can be (a) front end of the spring is pin joined and the rear end is shackled (b) front end of the spring is ... joined (c) both end of the spring are shackled (d) both end of the spring are pin joined

Last Answer : (b) front end of the spring is shackled and the rear end is pin joined

One-way streets are generally provided in crowded cities as, these (A) Are inexpensive means of traffic flow (B) Reduce delays to vehicles (C) Permit higher speed (D) All the above

Description : One-way streets are generally provided in crowded cities as, these (A) Are inexpensive means of traffic flow (B) Reduce delays to vehicles (C) Permit higher speed (D) All the above

Last Answer : Answer: Option D

The type of spring used to absorb shocks and vibrations in vehicles is, (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring (D) Belleville (coned disk) spring

Description : The type of spring used to absorb shocks and vibrations in vehicles is, (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring (D) Belleville (coned disk) spring

Last Answer : (B) Multi-leaf spring

The shape of docks and basins is generally kept (A) Rectangular ways (B) Diamond shape guys (C) Inclined guys (D) All of these

Description : The shape of docks and basins is generally kept (A) Rectangular ways (B) Diamond shape guys (C) Inclined guys (D) All of these

Last Answer : (D) All of these

Why star delta starter is preferred with induction motor?

Description : Why star delta starter is preferred with induction motor?

Last Answer : Star delta starter is preferred with induction motor due to following reasons: Starting current is reduced 3-4 times of the direct current due to which voltage drops and hence it causes less ... caused. In addition, starting torque is increased and it prevents the damage of motor winding.

Delta Air Lines wishes to purchase five new aeroplanes. Management seeks information from several aircraft manufacturers, screens the offers, and discusses price and terms of sale with the preferred company until a transaction is completed. This method of pricing is: A)administered. B)sealed bid. C)open bid. D)negotiated.

Description : Delta Air Lines wishes to purchase five new aeroplanes. Management seeks information from several aircraft manufacturers, screens the offers, and discusses price and terms of sale with the preferred company until a ... method of pricing is: A)administered. B)sealed bid. C)open bid. D)negotiated.

Last Answer : D)negotiated.

Cast iron pipes are generally preferred to, because (A) Of moderate cost (B) Of ease to join (C) Of longer life (D) All the above

Description : Cast iron pipes are generally preferred to, because (A) Of moderate cost (B) Of ease to join (C) Of longer life (D) All the above

Last Answer : (D) All the above

A circular gravity aqueduct is not generally preferred to because of (A) Its maximum hydraulic mean depth (B) Maximum area per unit of wetted perimeter (C) Minimum cost of construction (D) Its proper support on the ground

Description : A circular gravity aqueduct is not generally preferred to because of (A) Its maximum hydraulic mean depth (B) Maximum area per unit of wetted perimeter (C) Minimum cost of construction (D) Its proper support on the ground

Last Answer : (D) Its proper support on the ground

True meridians are generally preferred to magnetic meridians because (A) These converge to a point (B) These change due to change in time (C) These remain constant (D) None of these

Description : True meridians are generally preferred to magnetic meridians because  (A) These converge to a point  (B) These change due to change in time  (C) These remain constant  (D) None of these 

Last Answer : (C) These remain constant 

Subtense tacheometry is generally preferred to if ground is (A) Flat (B) Undulating (C) Mountainous (D) Deserts

Description : Subtense tacheometry is generally preferred to if ground is  (A) Flat  (B) Undulating  (C) Mountainous  (D) Deserts 

Last Answer : (B) Undulating 

The method generally preferred to for contouring an undulating area, is (A) Chain surveying (B) Plane table surveying (C) Tacheometrical surveying (D) Compass surveying

Description : The method generally preferred to for contouring an undulating area, is (A) Chain surveying (B) Plane table surveying (C) Tacheometrical surveying (D) Compass surveying

Last Answer : (C) Tacheometrical surveying

In tacheometrical observations, vertical staff holding is generally preferred to normal staffing, due to (A) Ease of reduction of observations (B) Facility of holding (C) Minimum effect of careless holding on the result (D) None of these

Description : In tacheometrical observations, vertical staff holding is generally preferred to normal staffing, due to (A) Ease of reduction of observations (B) Facility of holding (C) Minimum effect of careless holding on the result (D) None of these

Last Answer : (C) Minimum effect of careless holding on the result

Pile foundations are generally preferred to for (A) Bridge foundations (B) Sky scrapper buildings (C) Residential buildings (D) Runways

Description : Pile foundations are generally preferred to for (A) Bridge foundations (B) Sky scrapper buildings (C) Residential buildings (D) Runways

Last Answer : Answer: Option B

When the width of car parking space and width of street are limited, generally preferred parking system is (A) Parallel parking (B) 45° angle parking (C) 65° angle parking (D) 90° angle parking

Description : When the width of car parking space and width of street are limited, generally preferred parking system is (A) Parallel parking (B) 45° angle parking (C) 65° angle parking (D) 90° angle parking

Last Answer : Answer: Option A