Suction lift of a pump depends upon (A) Atmospheric pressure (B) Water temperature (C) Velocity of water in suction pipe (D) All the above

Suction lift of a pump depends upon 

(A) Atmospheric pressure 

(B) Water temperature 

(C) Velocity of water in suction pipe 

(D) All the above 

by

1 Answer

Answer :

(D) All the above 

by

Related questions

Horsepower requirement for given pump capacity depends upon the (A) Specific gravity of the liquid (B) Suction lift (C) Discharge head (D) All (A), (B) and (C)

Description : Horsepower requirement for given pump capacity depends upon the (A) Specific gravity of the liquid (B) Suction lift (C) Discharge head (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A centrifugal pump loses prime after starting. The reason of this trouble may be (A) Incomplete priming (B) Too high a suction lift (C) Low available NPSH and air leaks in the suction pipe (D) All (A), (B), and (C)

Description : A centrifugal pump loses prime after starting. The reason of this trouble may be (A) Incomplete priming (B) Too high a suction lift (C) Low available NPSH and air leaks in the suction pipe (D) All (A), (B), and (C)

Last Answer : (D) All (A), (B), and (C)

In case of unsteady fluid flow, conditions & flow pattern change with the passage of time at a position in a flow situation. Which of the following is an example of unsteady flow? (A) Discharge of water by a centrifugal pump being run at a constant rpm (B) Water flow in the suction and discharge pipe of a reciprocating pump (C) Water discharge from a vertical vessel in which constant level is maintained (D) Low velocity flow of a highly viscous liquid through a hydraulically smooth pipe

Description : In case of unsteady fluid flow, conditions & flow pattern change with the passage of time at a position in a flow situation. Which of the following is an example of unsteady flow? (A) ... level is maintained (D) Low velocity flow of a highly viscous liquid through a hydraulically smooth pipe

Last Answer : (B) Water flow in the suction and discharge pipe of a reciprocating pump

Consider the following statements: The total head against which a pump has to work must include, besides any other items, 1. the suction lift. 2. the delivery head. 3. the head lost due to friction at entrance in the rising main. 4. the head lost due to friction at exit in the rising main. Which of these statements are correct? (a) 1, 2 & 3 only (b) 2 & 3 only (c) 1, 2, 3 & 4 (d) 3 & 4 only

Description : Consider the following statements: The total head against which a pump has to work must include, besides any other items, 1. the suction lift. 2. the delivery head. 3. the head lost due to friction at entrance in the rising main. 4. the ... 2 & 3 only (b) 2 & 3 only (c) 1, 2, 3 & 4 (d) 3 & 4 only

Last Answer : (c) 1, 2, 3 & 4

Specific speed of a centrifugal pump depends upon the __________ head. (A) Suction (B) Delivery (C) Manometric (D) None of these

Description : Specific speed of a centrifugal pump depends upon the __________ head. (A) Suction (B) Delivery (C) Manometric (D) None of these

Last Answer : (D) None of these

Conversion of dynamic velocity head into static pressure head in a centrifugal pump is the result of : (a) Increasing area of flow between adjacent vanes from inlet to outlet (b) Difference in pressure between suction and delivery ends (c) Radial thrust in pumps (d) Stuffing Box

Description : Conversion of dynamic velocity head into static pressure head in a centrifugal pump is the result of : (a) Increasing area of flow between adjacent vanes from inlet to outlet (b) Difference in pressure between suction and delivery ends (c) Radial thrust in pumps (d) Stuffing Box

Last Answer : (b) Difference in pressure between suction and delivery ends

The net positive suction head (NPSH) of a centrifugal pump is defined as the sum of the velocity head and the pressure head at the (A) Discharge (B) Suction (C) Suction minus vapor pressure of the liquid at suction temperature (D) Discharge minus vapor pressure of the liquid at the discharge temperature

Description : The net positive suction head (NPSH) of a centrifugal pump is defined as the sum of the velocity head and the pressure head at the (A) Discharge (B) Suction (C) Suction minus vapor ... of the liquid at suction temperature (D) Discharge minus vapor pressure of the liquid at the discharge temperature

Last Answer : (C) Suction minus vapor pressure of the liquid at suction temperature

The net positive suction head (NPSH) of a centrifugal pump is defined as the sum of the velocity head and the pressure head at the (A) Discharge (B) Suction (C) Suction minus vapor pressure of the liquid at suction temperature (D) Discharge minus vapor pressure of the liquid at the discharge temperature

Description : The net positive suction head (NPSH) of a centrifugal pump is defined as the sum of the velocity head and the pressure head at the (A) Discharge (B) Suction (C) Suction minus vapor ... of the liquid at suction temperature (D) Discharge minus vapor pressure of the liquid at the discharge temperature

Last Answer : (C) Suction minus vapor pressure of the liquid at suction temperature

A compressor that takes suction at a pressure below atmospheric and discharge against atmospheric pressure is called a __________ pump. (A) Sump (B) Volute (C) Vacuum (D) Submerged

Description : A compressor that takes suction at a pressure below atmospheric and discharge against atmospheric pressure is called a __________ pump. (A) Sump (B) Volute (C) Vacuum (D) Submerged

Last Answer : (C) Vacuum

Maximum theoretical suction lift for water at 15°C by a centrifugal pump is 34 ft. The same for water at 90°C will be __________ ft. (A) 40 (B) 34 (C) 8 (D) 37

Description : Maximum theoretical suction lift for water at 15°C by a centrifugal pump is 34 ft. The same for water at 90°C will be __________ ft. (A) 40 (B) 34 (C) 8 (D) 37

Last Answer : (C) 8

The main drawback of centrifugal pump is a)necessity of priming b) discharge from pump varies with the load of water c) For high heads efficiency is low up to 50% d) the suction lift is limited to 6 metre e) all of the above*

Description : The main drawback of centrifugal pump is a)necessity of priming b) discharge from pump varies with the load of water c) For high heads efficiency is low up to 50% d) the suction lift is limited to 6 metre e) all of the above*

Last Answer : e) all of the above*

If the discharge of a centrifugal pump is throttled, then its suction lift (A) Increases (B) Decreases (C) Remains unchanged (D) Data insufficient to predict

Description : If the discharge of a centrifugal pump is throttled, then its suction lift (A) Increases (B) Decreases (C) Remains unchanged (D) Data insufficient to predict

Last Answer : (A) Increases

What is the maximum theoretical suction lift (metres) of a reciprocating pump? (A) 5 (B) 10(C) 50 (D) 100

Description : What is the maximum theoretical suction lift (metres) of a reciprocating pump? (A) 5 (B) 10(C) 50 (D) 100

Last Answer : (B) 10

A supercharger is used in the engines of earthmoving machines at higher altitudes because (a) The ambient atmospheric pressure is less at higher altitudes (b) Four-cycle engines depend on the suction of the engines for the supply of air (c) Two-cycle engines are not rugged enough for higher altitude (d) The ambient temperature is less as the altitude is higher

Description : A supercharger is used in the engines of earthmoving machines at higher altitudes because (a) The ambient atmospheric pressure is less at higher altitudes (b) Four-cycle engines depend on the suction ... rugged enough for higher altitude (d) The ambient temperature is less as the altitude is higher

Last Answer : (a) The ambient atmospheric pressure is less at higher altitudes

What causes cavitation in centrifugal pump? (A) High suction pressure (B) Low barometric pressure(C) Low suction pressure(D) High suction velocity

Description : What causes cavitation in centrifugal pump? (A) High suction pressure (B) Low barometric pressure (C) Low suction pressure (D) High suction velocity

Last Answer : (C) Low suction pressure

To pump water from a water reservoir 3 m deep and maximum water level at 135 m, a pump is installed to lift water up to R.L. 175 m at a constant rate of 36,00,000 litres per hour. If the length of the pipe is 1506 m and f = 0.01, ignoring other minor losses and assuming the economical diameter from Lea's formula D = 1.2 Q, the water horse power of the pump is (A) 400 (B) 450 (C) 500(D) 600

Description : To pump water from a water reservoir 3 m deep and maximum water level at 135 m, a pump is  installed to lift water up to R.L. 175 m at a constant rate of 36,00,000 litres per hour. If the length  of the ... the water horse power of the pump is  (A) 400  (B) 450  (C) 500 (D) 600

Last Answer : (D) 600

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Barometer is used to measure (A) Velocity of liquid(B) Atmospheric pressure (C) Pressure in pipes and channels (D) Difference of pressure between two points in a pipe

Description : Barometer is used to measure (A) Velocity of liquid (B) Atmospheric pressure (C) Pressure in pipes and channels (D) Difference of pressure between two points in a pipe

Last Answer : Answer: Option B

The pressure less than atmospheric pressure is known as (A) Suction pressure (B) Vacuum pressure (C) Negative gauge pressure (D) All of these

Description : The pressure less than atmospheric pressure is known as (A) Suction pressure (B) Vacuum pressure (C) Negative gauge pressure (D) All of these

Last Answer : Answer: Option D

Select the correct statement (A) Local atmospheric pressure depends upon elevation of locality only (B) Standard atmospheric pressure is the mean local atmospheric pressure a* sea level (C) Local atmospheric pressure is always below standard atmospheric pressure (D) A barometer reads the difference between local and standard atmospheric pressure

Description : Select the correct statement (A) Local atmospheric pressure depends upon elevation of locality only (B) Standard atmospheric pressure is the mean local atmospheric pressure a* sea level ... atmospheric pressure (D) A barometer reads the difference between local and standard atmospheric pressure

Last Answer : Answer: Option B

Which one of the following statements is correct? (a) Local atmospheric pressure is always lesser than standard atmospheric pressure (b) Local atmospheric pressure depends upon the elevation of the locality only (c) Standard atmospheric pressure is the mean atmospheric pressure at sea level (d) A barometer reads the difference between local, and standard atmospheric pressure

Description : Which one of the following statements is correct? (a) Local atmospheric pressure is always lesser than standard atmospheric pressure (b) Local atmospheric pressure depends upon the elevation of ... sea level (d) A barometer reads the difference between local, and standard atmospheric pressure

Last Answer : (c) Standard atmospheric pressure is the mean atmospheric pressure at sea level

In centrifugal pump operation, the cavitation can be eliminated by maintaining suction pressure __________ the vapor pressure of the liquid at the suction temperature. (A) Lower than (B) Higher than (C) Equal to (D) None of these

Description : In centrifugal pump operation, the cavitation can be eliminated by maintaining suction pressure __________ the vapor pressure of the liquid at the suction temperature. (A) Lower than (B) Higher than (C) Equal to (D) None of these

Last Answer : (B) Higher than

Cavitation occurs in a centrifugal pump when the suction pressure is (A) Less than the vapour pressure of the liquid at that temperature (B) Greater than the vapour pressure of the liquid at that temperature (C) Equal to the vapour pressure (D) Equal to the developed head

Description : Cavitation occurs in a centrifugal pump when the suction pressure is (A) Less than the vapour pressure of the liquid at that temperature (B) Greater than the vapour pressure of the liquid at that temperature (C) Equal to the vapour pressure (D) Equal to the developed head

Last Answer : (A) Less than the vapour pressure of the liquid at that temperature

The coefficient of discharge for an external mouthpiece depends upon (A) Velocity of liquid (B) Pressure of liquid (C) Area of mouthpiece (D) Length of mouthpiece

Description : The coefficient of discharge for an external mouthpiece depends upon (A) Velocity of liquid (B) Pressure of liquid (C) Area of mouthpiece (D) Length of mouthpiece

Last Answer : Answer: Option D

The magnitude of water hammer depends upon the (A) Elastic properties of the pipe material (B) Elastic properties of the liquid flowing through the pipe (C) Speed at which the valve is closed (D) All of the above

Description : The magnitude of water hammer depends upon the (A) Elastic properties of the pipe material (B) Elastic properties of the liquid flowing through the pipe (C) Speed at which the valve is closed (D) All of the above

Last Answer : Answer: Option D

Consider the following statements: Air vessels are fitted on the suction and delivery sides of a reciprocating pump to 1. Achieve higher speed without separation. 2. Reduce work in overcoming frictional resistance. 3. Avoid excessive vibration permanently. 4. Have nearly uniform discharge. Which of these statements are corrects? (a) 1, 2 & 4 only (b) 1, 2 & 3 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Description : Consider the following statements: Air vessels are fitted on the suction and delivery sides of a reciprocating pump to 1. Achieve higher speed without separation. 2. Reduce work in overcoming frictional resistance. 3. Avoid excessive vibration ... 2 & 3 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Last Answer : (d) 1, 2, 3 & 4

The boiling point of water depends upon the – (1) atmospheric pressure (2) volume (3) density (4) mass

Description : The boiling point of water depends upon the – (1) atmospheric pressure (2) volume (3) density (4) mass

Last Answer : (1) atmospheric pressure Explanation: The boiling point corresponds of water to the ternperature at which its vapour pressure equals the surrounding environmental pressure. So it is dependent on ... pressure decreases. As this pressure decreases, the boiling point of the water also decreases.

The boiling point of water depends upon the (1) atmospheric pressure (2) volume (3) density (4) mass

Description : The boiling point of water depends upon the (1) atmospheric pressure (2) volume (3) density (4) mass

Last Answer : atmospheric pressure

Pick up the incorrect statement from the following: (A) The flow in strainer type wells is radial (B) The flow in cavity type wells in spherical(C) In strainer type wells, area of flow depends upon the length of the strainer pipe (D) In cavity type wells, area of flow depends upon the size of the cavity

Description : Pick up the incorrect statement from the following:  (A) The flow in strainer type wells is radial  (B) The flow in cavity type wells in spherical  (C) In strainer type wells, area of flow ... pipe  (D) In cavity type wells, area of flow depends upon the size of the cavity 

Last Answer : (C) In strainer type wells, area of flow depends upon the length of the strainer pipe 

Hydraulic intensifier is used for increasing the (A) Rate of velocity of liquid supply (B) Rate of flow through delivery pipeline of a pump (C) Intensity of pressure of the liquid (D) Momentum rate through delivery pipe

Description : Hydraulic intensifier is used for increasing the (A) Rate of velocity of liquid supply (B) Rate of flow through delivery pipeline of a pump (C) Intensity of pressure of the liquid (D) Momentum rate through delivery pipe

Last Answer : (C) Intensity of pressure of the liquid

With suction pressure being atmospheric, increase in delivery pressure with fixed clearance volume A. increase volumetric efficiency B. decrease volumetric efficiency C. does not change volumetric efficiency D. First increase volumetric efficiency and then decrease it

Description : With suction pressure being atmospheric, increase in delivery pressure with fixed clearance volume A. increase volumetric efficiency B. decrease volumetric efficiency C. does not change volumetric efficiency D. First increase volumetric efficiency and then decrease it

Last Answer : ANSWER : B

Net positive suction head (NPSH) of a centrifugal pump must be (A) Greater than the vapour pressure of the liquid (B) Less than the vapour pressure of the liquid(C) Equal to the vapour pressure of the liquid(D) Less than barometric pressure

Description : Net positive suction head (NPSH) of a centrifugal pump must be (A) Greater than the vapour pressure of the liquid (B) Less than the vapour pressure of the liquid (C) Equal to the vapour pressure of the liquid (D) Less than barometric pressure

Last Answer : (A) Greater than the vapour pressure of the liquid

Cavitation can be prevented by (A) Suitably designing the pump (B) Maintaining the suction head sufficiently greater than the vapour pressure (C) Maintaining suction head = developed head (D) Maintaining suction head lower than the vapour pressure

Description : Cavitation can be prevented by (A) Suitably designing the pump (B) Maintaining the suction head sufficiently greater than the vapour pressure (C) Maintaining suction head = developed head (D) Maintaining suction head lower than the vapour pressure

Last Answer : (B) Maintaining the suction head sufficiently greater than the vapour pressure

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Sele(A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement. (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter

Water hammer is caused, when water flowing in a pipe is suddenly brought to rest by closing the valve. The extent of pressure thus produced due to water hammer depends on the (A) Pipe length (B) Fluid velocity in the pipe (C) Time taken to close the valve (D) All (A), (B) and (C)

Description : Water hammer is caused, when water flowing in a pipe is suddenly brought to rest by closing the valve. The extent of pressure thus produced due to water hammer depends on the (A) Pipe length (B) Fluid velocity in the pipe (C) Time taken to close the valve (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Actual lift of a pump is always less than the theoretical lift and is limited by the (A) Specific gravity & temperature of the liquid (B) Leakage & pressure decreasing at higher elevations (C) Frictional resistance through pipes, fittings & passages (D) All (A), (B) and (C)

Description : Actual lift of a pump is always less than the theoretical lift and is limited by the (A) Specific gravity & temperature of the liquid (B) Leakage & pressure decreasing at higher elevations (C) Frictional resistance through pipes, fittings & passages (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

With increase in compression ratio, the volumetric efficiency of air compressor (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease (depends on the suction pressure)

Description : With increase in compression ratio, the volumetric efficiency of air compressor (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease (depends on the suction pressure)

Last Answer : Option A

A differential manometer is used to measure (A) Atmospheric pressure (B) Pressure in pipes and channels (C) Pressure in Venturimeter (D) Difference of pressures between two points in a pipe

Description : A differential manometer is used to measure (A) Atmospheric pressure (B) Pressure in pipes and channels (C) Pressure in Venturimeter (D) Difference of pressures between two points in a pipe

Last Answer : Answer: Option D

Piezometer is used to measure (A) Pressure in pipe, channels etc. (B) Atmospheric pressure (C) Very low pressures (D) Difference of pressure between two points

Description : Piezometer is used to measure (A) Pressure in pipe, channels etc. (B) Atmospheric pressure (C) Very low pressures (D) Difference of pressure between two points

Last Answer : Answer: Option C

A manometer is used to measure (A) Atmospheric pressure (B) Pressure in pipes and channels (C) Pressure in Venturimeter (D) Difference of pressures between two points in a pipe

Description : A manometer is used to measure (A) Atmospheric pressure (B) Pressure in pipes and channels (C) Pressure in Venturimeter (D) Difference of pressures between two points in a pipe

Last Answer : Answer: Option B

The velocity of the liquid flowing through the divergent portion of a Venturimeter (A) Remains constant (B) Increases (C) Decreases (D) Depends upon mass of liquid

Description : The velocity of the liquid flowing through the divergent portion of a Venturimeter (A) Remains constant (B) Increases (C) Decreases (D) Depends upon mass of liquid

Last Answer : Answer: Option C

The excess of the sum of pressure & velocity heads over the vaporpressure of the liquid at the suction is called the(A) Static submergence(B) Net positive suction head (NPSH)(C) Cavitation sensitivity(D) Priming

Description : The excess of the sum of pressure & velocity heads over the vaporpressure of the liquid at the suction is called the (A) Static submergence (B) Net positive suction head (NPSH) (C) Cavitation sensitivity (D) Priming

Last Answer : (B) Net positive suction head (NPSH)

The depth of the water table at a place is 45 m below the general ground level. To lift water from a deep tube well in such a locality, the type of pump to be installed is (A) Centrifugal pump (B) Reciprocating pump (C) Deep well turbine pump (D) None of these

Description : The depth of the water table at a place is 45 m below the general ground level. To lift water from a  deep tube well in such a locality, the type of pump to be installed is  (A) Centrifugal pump  (B) Reciprocating pump  (C) Deep well turbine pump  (D) None of these 

Last Answer : (C) Deep well turbine pump

For 3.25 × 10-2 cumecs discharging from a well, a pump is installed to lift water against a total head of 30 m. The minimum required horse power, is (A) 10 H.P. (B) 15 H.P. (C) 18 H.P. (D) 20 H.P.

Description : For 3.25 × 10-2 cumecs discharging from a well, a pump is installed to lift water against a total head  of 30 m. The minimum required horse power, is  (A) 10 H.P.  (B) 15 H.P.  (C) 18 H.P.  (D) 20 H.P. 

Last Answer : (D) 20 H.P. 

Velocity of a reaction depends upon the (A) Nature of the reactants (B) Concentration of the reactants (C) Temperature at which the reaction is carried (D) All (A), (B) and (C)

Description : Velocity of a reaction depends upon the (A) Nature of the reactants (B) Concentration of the reactants (C) Temperature at which the reaction is carried (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Black body radiations depends upon a) The shape and nature of the body b) The velocity of radiations and colour of the body c) The temperature of the body d) All of the above

Description : Black body radiations depends upon a) The shape and nature of the body b) The velocity of radiations and colour of the body c) The temperature of the body d) All of the above

Last Answer : c) The temperature of the body

Which of the following is not the function of a volute casing provided in a centrifugal pump? (A) To reduce the head loss in discharge (B) To increase the pump efficiency (C) To collect liquid from the periphery of the impeller and to transmit it to the delivery pipe at constant velocity (D) To increase the pump discharge rate

Description : Which of the following is not the function of a volute casing provided in a centrifugal pump? (A) To reduce the head loss in discharge (B) To increase the pump efficiency (C) To collect liquid ... and to transmit it to the delivery pipe at constant velocity (D) To increase the pump discharge rate

Last Answer : Option D

In most of the vacuum crystalliser, vacuum is generally produced by means of a (A) Suction pump (B) Compressed air jet (C) Steam jet ejector with a barometric condenser (D) None of these

Description : In most of the vacuum crystalliser, vacuum is generally produced by means of a (A) Suction pump (B) Compressed air jet (C) Steam jet ejector with a barometric condenser (D) None of these

Last Answer : (C) Steam jet ejector with a barometric condenser

Circulation pump is located below the evaporator to (A) Avoid cavitation (B) Avoid frequent priming (C) Create more suction head (D) None of these

Description : Circulation pump is located below the evaporator to (A) Avoid cavitation (B) Avoid frequent priming (C) Create more suction head (D) None of these

Last Answer : (C) Create more suction head