Asbestos pipes are joined by means of (A) Flanged joint (B) Flexible joint (C) Dresser coupling joint (D) Simplex joint

Asbestos pipes are joined by means of
(A) Flanged joint
(B) Flexible joint
(C) Dresser coupling joint
(D) Simplex joint
by

1 Answer

Answer :

(D) Simplex joint
by

Related questions

The joint used for joining the plain ends of cast iron pipes, is (A) Flanged joint (B) Socket and spigot joint (C) Dresser coupling joint (D) Flexible joint

Description : The joint used for joining the plain ends of cast iron pipes, is  (A) Flanged joint  (B) Socket and spigot joint  (C) Dresser coupling joint  (D) Flexible joint 

Last Answer : (C) Dresser coupling joint 

The type of joint generally used in cast iron pipes, is (A) Socket and spigot joint (B) Flanged joint (C) Dresser coupling joint (D) All the above

Description : The type of joint generally used in cast iron pipes, is (A) Socket and spigot joint (B) Flanged joint (C) Dresser coupling joint (D) All the above

Last Answer : (D) All the above

Large diameter reinforced cement concrete (RCC) pipes are generally joined by __________ joint. (A) Flanged iron (B) Collar (C) Flexible (D) Expansion

Description : Large diameter reinforced cement concrete (RCC) pipes are generally joined by __________ joint. (A) Flanged iron (B) Collar (C) Flexible (D) Expansion

Last Answer : Option B

In pumping stations, the type of joint generally used, is (A) Socket and spigot joint (B) Flanged joint (C) Expansion joint (D) Dresser coupling joint

Description : In pumping stations, the type of joint generally used, is (A) Socket and spigot joint (B) Flanged joint (C) Expansion joint (D) Dresser coupling joint

Last Answer : (B) Flanged joint

Asbestos pipes are (A) Light in weight and easy to transport (B) Highly resistant to corrosion (C) High flexible to accommodate deflection upto 12° (D) All the above

Description : Asbestos pipes are (A) Light in weight and easy to transport (B) Highly resistant to corrosion (C) High flexible to accommodate deflection upto 12° (D) All the above

Last Answer : (D) All the above

__________ joint is usually used for joining cast iron pipes mostly used for temporary pipelines, where it may be necessary to dismantle & reassemble the pipeline very frequently. (A) Collar (B) Flanged (C) Bell and Spigot (D) Expansion

Description : __________ joint is usually used for joining cast iron pipes mostly used for temporary pipelines, where it may be necessary to dismantle & reassemble the pipeline very frequently. (A) Collar (B) Flanged (C) Bell and Spigot (D) Expansion

Last Answer : Option B

Cast iron detachable joint is used in __________ pipes. (A) Steel (B) Cast iron (C) Asbestos cement (D) Reinforced cement concrete

Description : Cast iron detachable joint is used in __________ pipes. (A) Steel (B) Cast iron (C) Asbestos cement (D) Reinforced cement concrete

Last Answer : (A) Steel

Lead is poured into the joint between two- __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement

Description : Lead is poured into the joint between two- __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement

Last Answer : (C) Cast iron

Lead is poured into the joint between two __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement

Description : Lead is poured into the joint between two __________ pipes. (A) Mild steel (B) Concrete (C) Cast iron (D) Asbestos cement

Last Answer : Option C

Glass pipes can be joined by (A) Flanges (B) Welding (C) Soldering (D) Bell and spigot joint

Description : Glass pipes can be joined by (A) Flanges (B) Welding (C) Soldering (D) Bell and spigot joint

Last Answer : (D) Bell and spigot joint

Find the shear stress in a flange at the junction of hub in rigid flanged coupling if torsional moment is 2980N-m and diameter of hub being 125mm. Also the thickness of flange is 25mm. a) 6.77N/mm2 b) 10.24N/mm2 c) 4.84N/mm2 d) 4.22N/mm2

Description : Find the shear stress in a flange at the junction of hub in rigid flanged coupling if torsional moment is 2980N-m and diameter of hub being 125mm. Also the thickness of flange is 25mm. a) 6.77N/mm2 b) 10.24N/mm2 c) 4.84N/mm2 d) 4.22N/mm2

Last Answer : c) 4.84N/mm2

Actual stress in the bolts of a flanged coupling of a shaft will be (a) More than the designed strength (b) Less than the designed strength (c) Neither more nor less than the designed strength (d) None

Description : Actual stress in the bolts of a flanged coupling of a shaft will be (a) More than the designed strength (b) Less than the designed strength (c) Neither more nor less than the designed strength (d) None

Last Answer : (b) Less than the designed strength

A flanged joint is composed of all but which of the following? a) The flange b) The bolts. c) The assembly method d) The gasket.

Description : A flanged joint is composed of all but which of the following? a) The flange b) The bolts. c) The assembly method d) The gasket.

Last Answer : b) The bolts

The asbestos cement pipes are generally laid A. Horizontally B. Vertically C. At an angle of 30° D. At an angle of 60°

Description : The asbestos cement pipes are generally laid A. Horizontally B. Vertically C. At an angle of 30° D. At an angle of 60°

Last Answer : ANS: B

If b is the width of a plate joined by diamond riveting of diameter d, the efficiency of the joint is given by (A) (b + d)/b (B) (b - d)/b (C) (d - b)/d (D) (b - d)/d

Description : If b is the width of a plate joined by diamond riveting of diameter d, the efficiency of the joint is  given by  (A) (b + d)/b (B) (b - d)/b (C) (d - b)/d (D) (b - d)/d

Last Answer : (B) (b - d)/b

Calculate the force acting on the each pin in flexible coupling if torque transmitted is 397N-m and PCD=120mm with number of pins 6. a) 1400.3N b) 1102.8N c) 1320.3N d) None of the listed

Description : Calculate the force acting on the each pin in flexible coupling if torque transmitted is 397N-m and PCD=120mm with number of pins 6. a) 1400.3N b) 1102.8N c) 1320.3N d) None of the listed

Last Answer : b) 1102.8N

Flange coupling is ............ types of coupling. A. Flexible B. Rigid

Description : Flange coupling is ............ types of coupling. A. Flexible B. Rigid

Last Answer : B. Rigid

Universal coupling is ............ types of coupling. A. Flexible B. Rigid

Description : Universal coupling is ............ types of coupling. A. Flexible B. Rigid

Last Answer : A. Flexible

What Is A Flexible Coupling?

Description : What Is A Flexible Coupling?

Last Answer : It connects the shafts with soft materials such as rubber, leather, canvas etc. It adjusts the little misalignment and controls the vibrations also. It is generally used electric pumps.

Flexible plastic pipes are made of (A) High density polyethylene (HDPE) (B) Low density polyethylene (LDPE) (C) Polypropylene (D) Unsaturated polyester

Description : Flexible plastic pipes are made of (A) High density polyethylene (HDPE) (B) Low density polyethylene (LDPE) (C) Polypropylene (D) Unsaturated polyester

Last Answer : (B) Low density polyethylene (LDPE)

Secondary steel has to be provided across__________ of flanged beams [ A ] Full effective width of flange [ B ] The width of web [ C ] Half of the width of flange [ D ] None of the above.

Description : Secondary steel has to be provided across__________ of flanged beams [ A ] Full effective width of flange [ B ] The width of web [ C ] Half of the width of flange [ D ] None of the above.

Last Answer : [ A ] Full effective width of flange

Flanged beams are preferred when the concrete in the slab is on the [ A ] compression side of the beam [ B ] tension side of the beam [ C ] may be compression side or tension side of the beam [ D ] none of the above

Description : Flanged beams are preferred when the concrete in the slab is on the [ A ] compression side of the beam [ B ] tension side of the beam [ C ] may be compression side or tension side of the beam [ D ] none of the above

Last Answer : [ A ] compression side of the beam

Flanged beams are preferred when the concrete in the slab is on the [ A ] compression side of the beam [ B ] tension side of the beam [ C ] may be compression side or tension side of the beam [ D ] none of the above

Description : Flanged beams are preferred when the concrete in the slab is on the [ A ] compression side of the beam [ B ] tension side of the beam [ C ] may be compression side or tension side of the beam [ D ] none of the above

Last Answer : [ A ] compression side of the beam

The split - pin is used in... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : The split - pin is used in... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

The joints between link of a suspension bridge, which of the following joints used.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : The joints between link of a suspension bridge, which of the following joints used.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

To joining the links of a bicycle chain which of the following joint is used. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : To joining the links of a bicycle chain which of the following joint is used. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

Forked - pin joints is also called as... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : Forked - pin joints is also called as... A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

The valve rod connected in steam engine by using.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Description : The valve rod connected in steam engine by using.. A. Cotter joint B. Knuckle joint C. Universal coupling D. Bolted joint

Last Answer : B. Knuckle joint

Most commonly used joint in the underground pipe lines is the (A) Sleeve joint (B) Coupling (C) Flange (D) Expansion joint

Description : Most commonly used joint in the underground pipe lines is the (A) Sleeve joint (B) Coupling (C) Flange (D) Expansion joint

Last Answer : (A) Sleeve joint

Pipes are laid parallel (A) To increase the capacity of the water supply (B) To provide a means of repairing without closing water supply (C) To meet the requirement of excessive supply (D) All the above

Description : Pipes are laid parallel (A) To increase the capacity of the water supply (B) To provide a means of repairing without closing water supply (C) To meet the requirement of excessive supply (D) All the above

Last Answer : (D) All the above

Multiple universal joint are preferred over single joint because they : A. provide higher strength B. minimize speed fluctuation C. are lighter in weight D. are more flexible

Description : Multiple universal joint are preferred over single joint because they : A. provide higher strength B. minimize speed fluctuation C. are lighter in weight D. are more flexible

Last Answer : B. minimize speed fluctuation

The lowest level of commitment to international marketing, and also the most flexible approach, is A)a joint venture. B)direct ownership. C)exporting. D)licensing. E)a trading company.

Description : The lowest level of commitment to international marketing, and also the most flexible approach, is A)a joint venture. B)direct ownership. C)exporting. D)licensing. E)a trading company.

Last Answer : C)exporting.

In joints, the bones invovled are joined together with the help of cargtilages. The joint between the adjacent vertebrae in the vertebral column is of

Description : In joints, the bones invovled are joined together with the help of cargtilages. The joint between the adjacent vertebrae in the vertebral column is of

Last Answer : In joints, the bones invovled are joined together with the help of cargtilages. The joint between ... pattern and it permits limited movements, is-

Which one of the following is the correct description of a certain part of a normal human skeleton? (a) Parietal bone and the temporal bone of the skull are joined fibrous joint. (b) First vertebra is axis which articulates with the occipital condyles. (c) The 9th and 10th pairs of ribs are called the floating ribs. (d) Glenoid cavity is a depression to which the thigh bone articulates.

Description : Which one of the following is the correct description of a certain part of a normal human skeleton? (a) Parietal bone and the temporal bone of the skull are joined fibrous joint. (b) First ... called the floating ribs. (d) Glenoid cavity is a depression to which the thigh bone articulates.

Last Answer : (a) Parietal bone and the temporal bone of the skull are joined fibrous joint.

__________ joint is mostly used for joining pipes carrying water at low pressure. (A) Nipple (B) Socket (C) Union

Description : __________ joint is mostly used for joining pipes carrying water at low pressure. (A) Nipple (B) Socket (C) Union

Last Answer : Option B

The compaction of concrete in the drilled pile hole is done by compressed air in the case of (A) Simplex pile (B) Franki pile (C) Pressure pile (D) Vibro pile

Description : The compaction of concrete in the drilled pile hole is done by compressed air in the case of (A) Simplex pile (B) Franki pile (C) Pressure pile (D) Vibro pile

Last Answer : Answer: Option C

Best type of piles for soft soil having little resistance to the flow of concrete, is (A) Simplex pile (B) Vibro pile (C) Raymond pile (D) Franki pile

Description : Best type of piles for soft soil having little resistance to the flow of concrete, is (A) Simplex pile (B) Vibro pile (C) Raymond pile (D) Franki pile

Last Answer : Answer: Option B

The pile which is provided with a bulb filled with concrete at its lower end, is known as (A) Simplex pile (B) Mac-Arthur pile (C) Raymond pile (D) Franki pile

Description : The pile which is provided with a bulb filled with concrete at its lower end, is known as (A) Simplex pile (B) Mac-Arthur pile (C) Raymond pile (D) Franki pile

Last Answer : Answer: Option B

Which one of the following piles has a cast iron shoe even after removal of the hollow cylindrical steel casing? (A) Simplex pile (B) Pedestal pile (C) Vibro pile (D) Both (a) and (c) of the above

Description : Which one of the following piles has a cast iron shoe even after removal of the hollow cylindrical steel casing? (A) Simplex pile (B) Pedestal pile (C) Vibro pile (D) Both (a) and (c) of the above

Last Answer : Answer: Option D

Do I need threaded or flanged type of vacuum relief valve?

Description : Do I need threaded or flanged type of vacuum relief valve?

Last Answer : You should take your current one off and see what type you have. If you can't take it off, then you should go down to your local parts store and ask them which one your vehicle takes. They have a huge database that typically lists all of the different parts that are needed.

Why ball valves are normally flanged?

Description : Why ball valves are normally flanged?

Last Answer : Answer: Because of soft seat PTFE which can damage during welding.

Which of the following is required to be hydrostatically tested per ASME B31.3? a) Flanges. b) Flanged fittings. c) Flanges and flanged fittings. d) There is no hydrostatic testing requirement in ASME B16.5.

Description : Which of the following is required to be hydrostatically tested per ASME B31.3? a) Flanges. b) Flanged fittings. c) Flanges and flanged fittings. d) There is no hydrostatic testing requirement in ASME B16.5.

Last Answer : b) Flanged fittings.

Flanges and flanged fittings may be constructed of which of the following materials? a) Castings. b) Forgings. c) Plate. d) All of the above.

Description : Flanges and flanged fittings may be constructed of which of the following materials? a) Castings. b) Forgings. c) Plate. d) All of the above.

Last Answer : d) All of the above.

Which of the following is not required to be marked on an ASME B16.5 flange or flanged fitting? a) Manufactures name or trademark. b) Material. c) Ratting class and "B16". d) Temperature.

Description : Which of the following is not required to be marked on an ASME B16.5 flange or flanged fitting? a) Manufactures name or trademark. b) Material. c) Ratting class and "B16". d) Temperature.

Last Answer : d) Temperature.

When flanges and flanged fittings meet the requirements for multiple materials and are marked for multiple materials and are marked in accordance with ASME B16.5, which of the following pressure rating may be used? e) Any applicable pressure rating. f) The lowest must be used. g) The highest must be used. h) Flanges may only meet one material specification.

Description : When flanges and flanged fittings meet the requirements for multiple materials and are marked for multiple materials and are marked in accordance with ASME B16.5, which of the following pressure rating may be ... . g) The highest must be used. h) Flanges may only meet one material specification.

Last Answer : e) Any applicable pressure rating.

What pressure does ASME B16.5 limit flanged fittings to during system hydrostatic testing? a) 1.5 times the 100°F pressure rating, rounded to next highest 25psi. b) 1.5 times the flange class. c) The maximum pressure rating for the flange. d) The flange class plus 250psi.

Description : What pressure does ASME B16.5 limit flanged fittings to during system hydrostatic testing? a) 1.5 times the 100°F pressure rating, rounded to next highest 25psi. b) 1.5 times the flange class. c) The maximum pressure rating for the flange. d) The flange class plus 250psi.

Last Answer : a) 1.5 times the 100°F pressure rating, rounded to next highest 25psi. b) 1.5 times the flange class.

When applying to pressure ratings listed in ASME B16.5 at high or low temperatures which of the following must be considered? a) Risk of leakage due to forces and moments developed. b) Bursting of the flanged fitting. c) The bolting forces at the flange. d) All of the above.

Description : When applying to pressure ratings listed in ASME B16.5 at high or low temperatures which of the following must be considered? a) Risk of leakage due to forces and moments developed. b) Bursting of the flanged fitting. c) The bolting forces at the flange. d) All of the above.

Last Answer : a) Risk of leakage due to forces and moments developed.

When flanged fittings are to be used at temperatures below -20°F, what pressure rating is to be used? a) The pressure rating at the actual service temperature, found by interpretation. b) The pressure rating at -20°F. c) The pressure equal to the flange class. d) Flanges complying with ASME B16.5 may not be used below -20°F.

Description : When flanged fittings are to be used at temperatures below -20°F, what pressure rating is to be used? a) The pressure rating at the actual service temperature, found by interpretation. b) The pressure ... to the flange class. d) Flanges complying with ASME B16.5 may not be used below -20°F.

Last Answer : b) The pressure rating at -20°F.

The temperature shown for a given pressure rating by class is normally? a) The temperature of the flanged fitting. b) The temperature of the process fluid within. c) The process temperature minus 20°F. d) A and B.

Description : The temperature shown for a given pressure rating by class is normally? a) The temperature of the flanged fitting. b) The temperature of the process fluid within. c) The process temperature minus 20°F. d) A and B.

Last Answer : d) A and B.

The flange markings on a flanged fitting indicate which of the following? a) Pressure. b) Pressure at a specified temperature. c) Flange class. d) Maximum pressure.

Description : The flange markings on a flanged fitting indicate which of the following? a) Pressure. b) Pressure at a specified temperature. c) Flange class. d) Maximum pressure.

Last Answer : c) Flange class.