List any six criteria for selecting a proper transducer for an application.

List any six criteria for selecting a proper transducer for an application.
by

1 Answer

Answer :

Criteria for selecting a transducer for an application: 1. Electrical output of transducer (Current/voltage) 2. Range of measurement i.e maximum and minimum values of parameter to be measured. 3. Static operating condition of a transducer. 4. Electrical Noise level. 5. Temperature at which transducer is operating. 6. Dynamic protection housing (IP Protection) 7. Type of mounting required for transducer. 8. Accuracy required. 9. Operating principle suited for application. 10. Sensitivity of transducer. 11. Loading effect. 12. Stability & Reliability of transducer 13. Cost and availability

by

Related questions

Define transducer. State factors which are considered while selecting transducer for a particular application.

Description : Define transducer. State factors which are considered while selecting transducer for a particular application.

Last Answer : Transducer - It converts one form of signal into another form. A transducer is a device that is used to convert a physical quantity into its corresponding electrical signal. ... compatibility : The transducer should maintain input and output characteristic for the selected environmental condition.

Discuss any 4 points to be considered while selecting a transducer for its intended applications.

Description : Discuss any 4 points to be considered while selecting a transducer for its intended applications. 

Last Answer : 1. Operating range 2. Operating principle 3. Sensitivity 4. Accuracy 5. Frequency response and resonant frequency 6. Errors 7. Environmental compatibility 8. Usage and ruggedness. 9. ... 10. Stability and Reliability 11. Loading effect 12. Static characteristics 13. General selection criteria

State selection criteria of transducer.

Description : State selection criteria of transducer.

Last Answer : * Operating Principle : The transducers are selected on the basis of operating principle it may be resistive, inductive, capacitive, optical etc.  * Operating range : The range ... : The transducer should maintain input and output characteristic for the selected environmental condition. 

What is the criteria for selecting the best Wi-Fi channel?

Description : What is the criteria for selecting the best Wi-Fi channel?

Last Answer : answer:I find that the non-overlapping ones are more reliable. Remember, you want your signal, and other transmitters on the same channel can make your signal harder to get when you're picking one of ... -and-go, while some of the smarter ones set up a password, but few bother changing channels.

Who decides societal norms and what is the criteria for selecting/passing on those norms?

Description : Who decides societal norms and what is the criteria for selecting/passing on those norms?

Last Answer : answer:Well, I would argue that in a complex system, behaviours emerge in a non-linear, stochastic fashion. Social norms are a manifestation of the emergent behaviour of a system composed of ... less criteria than they are observations of whether they cause the system to attempt to self-correct.

Describe the selection criteria for selecting stone for face work of building.

Description : Describe the selection criteria for selecting stone for face work of building. 

Last Answer : 1. Appearance: Stone to be used for construction should be decent in appearance and have uniform colour 2. Durability: A Good building stone should be durable i.e. it should resist atmospheric action ... it should not catch fire easily. 8. Seasoning: Stones should be well seasoned before use.

Give any four selection criteria for selecting network topology.

Description : Give any four selection criteria for selecting network topology.

Last Answer : Selection criteria for selecting network topology. 1. Size of the network & number of devices or nodes being connected. 2. Ease of configuration & installing. 3. The ease of adding new device in an ... hubs etc. 7. Costs involved. 8. Need of security. 9. Need of network administration. 

State principle of operation of piezo-electric transducer. State its application.

Description : State principle of operation of piezo-electric transducer. State its application.

Last Answer : The piezoelectric element used for converting mechanical movement into electric signals. The mechanical deformation generates charges and this charge appears as a voltage across the electrodes.  ... destructive test (NDT) equipments 6. Piezoelectric materials are used in ultrasonic transducers. 

State the use of RADAR type level transducer & list two advantages.

Description : State the use of RADAR type level transducer & list two advantages.

Last Answer : Applications of radar type transducer: i) RADAR type level transducer is suitable for large tanks with range upto 200m for level measurement. ii) It is used for continuous level measurement. ... iii) Not affected by corrosive materials. iv) Can be used for hard to handle' applications.

List any two materials for Piezoelectric transducer.

Description : List any two materials for Piezoelectric transducer.

Last Answer : i) Quartz crystal, ii) Barium titanete , iii) Rochelle salt , iv) Lithium Sulphate, v) Potassium Dihydrogen phosphate.

List non contact type transducer and compare them on the basis of any two factors.

Description : List non contact type transducer and compare them on the basis of any two factors.

Last Answer : Magnetic pick-up Photoelectric This tachometer generator consists of a metallic tooth rotor mounted on the shaft whose speed is to be measured. This method of measuring speed of rotation ... by an electronic counter which can be directly calibrated in terms of speed in rpm.

List two advantages and disadvantages of photoelectric pickup transducer.

Description : List two advantages and disadvantages of photoelectric pickup transducer.

Last Answer : Advantages : 1. No direct physical contact of the meter with rotating shaft whose speed to be measured. Hence no additional load on the shaft. 2. Output is in digital format. 3. No A/D converted ... (typically 50,000 hours.) 2. The accuracy of meter depends on the error represented by one pulse.

List four electric pressure transducer.

Description : List four electric pressure transducer.

Last Answer : List of electric pressure measuring devices: 1. Diaphragm with strain gauge 2. Bourdon Tube with LVDT 3. Differential Pressure cell 4. Piezoelectric type pressure transducer 5. Capacitance pressure transducer 6. Optical Pressure transducer 7. Resistive pressure transducer 

Give one application each of following transducer: (i) LVDT (ii) RVDT (iii) Capacitive (iv) Piezoelectric

Description : Give one application each of following transducer: (i) LVDT (ii) RVDT (iii) Capacitive (iv) Piezoelectric

Last Answer : i) LVDT ➢ LVDT used to measure force ➢ LVDT used to measure strain ➢ LVDT used to measure weight ➢ LVDT used to measure tension ➢ LVDT used to measure pressure ➢ The ... flow meters, non-destructive test (NDT) equipment's ➢ Piezoelectric materials are used in ultrasonic transducers.

Compare active transducer with passive transducer based on working principle, example, advantage, application

Description : Compare active transducer with passive transducer based on working principle, example, advantage, application

Last Answer : Compare active transducer with passive transducer based on working principle, example, advantage, application

An application can be opened through shortcut on the desktop by (a) Double clicking on its shortcut (b) Selecting the icon and pressing Enter -Technology

Description : An application can be opened through shortcut on the desktop by (a) Double clicking on its shortcut (b) Selecting the icon and pressing Enter -Technology

Last Answer : (d) An application can be opened through the shortcut made on desktop by double clicking on its shortcut icon, pressing Enter or Right clicking and choosing Open button.

What are the six criteria used to build a complete evolutionary branch of vertebrates?

Description : What are the six criteria used to build a complete evolutionary branch of vertebrates?

Last Answer : Dichotomy in each of the six following criteria builds the vertebrate evolutionary branch: absence of mandibles separates cyclostomes from others; absence of limbs separates fishes from the remaining; ... ; absence of mammary glands and hair separates birds from mammals. Image Diversity: cyclostomes

List any two specifications of electrical pressure transducer.

Description : List any two specifications of electrical pressure transducer.

Last Answer : Specifications of electrical pressure transducer: - 1. Root Sum Squares (RSS) 2. Non-Linearity 3. Hysteresis 4. Non-Repeatability 5. Long-Term Stability 6. Zero Offset 7. Span ... Size 10. associated circuit 11. sensitivity 12. self-generated or external power source 13. Miscellaneous

List any four types of transducer.

Description : List any four types of transducer.

Last Answer : Types of Transducer based on Quantity to be Measured Temperature transducers Pressure transducers Displacement transducers Flow transducers Types of Transducer based on the Principle of ... Whether an External Power Source is required or not Active Transducer Passive Transducer

Write example of each type (i) Primary transducer (ii) Active transducer (iii) Electrical transducer (iv) Digital transducer

Description : Write example of each type (i) Primary transducer (ii) Active transducer (iii) Electrical transducer (iv) Digital transducer

Last Answer : (i) Active transducer:-Thermocouple, piezoelectric, photovoltaic cell (ii) Primary transducer:- Bourdon tube, bellows, (iii) Electrical transducer.:- LVDT,RVDT, Hall effect, strain gauge, ... , optical pyrometer, radiation pyrometer (iv) Digital transducer:- Linear Encoder, digital taco generator

Classify transducer. Write one sentence about each of them.

Description : Classify transducer. Write one sentence about each of them.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Explain how AC current is measured using hall effect transducer.

Description : Explain how AC current is measured using hall effect transducer. 

Last Answer : This type of sensor works on a simple electromagnetic principle.  In above diagram of the Hall effect. A current is conducted through a thin piece of foil from terminal I and ground. ... called the Hall-effect voltage is produced at the terminals attached to the opposite sides of the foil.

Define the term Transducer and sensor.

Description : Define the term Transducer and sensor.

Last Answer : Transducer : Transducer is defined as a device which converts one form of energy into another form. Sensor : Sensor is a device which detects or measures a physical property and records, indicates, or otherwise responds to it.

Explain in brief AC Current , RMS Indication using Hall Effect Transducer.

Description : Explain in brief AC Current , RMS Indication using Hall Effect Transducer.

Last Answer : When an ac current passes through the conductor it sets up a magnetic field around the conductor. This magnetic field is proportional to the current. A Hall Effect Transducer is placed in a ... flowing in the conductor. In this way, the current is measured using the Hall effect transducer. 

Draw and explain in brief speed measurement using non-contact type transducer.

Description : Draw and explain in brief speed measurement using non-contact type transducer. 

Last Answer :  i) Photoelectric Tachometer:  This method of measuring speed consists of mounting an opaque disc on the rotating shaft. The disc has a number of equidistant holes on its periphery. At one side of the disc a light source is ... (pulses per second /number of teeth)  = (P/T) rps = (P/T) *60 rpm.

Draw and explain the operation of pressure transducer having diaphragm as a primary sensor and four strain gauges as secondary sensors.

Description : Draw and explain the operation of pressure transducer having diaphragm as a primary sensor and four strain gauges as secondary sensors.

Last Answer : Pressure measurement with strain gauges on diaphragm: Description: This method uses the principle of converting pressure into a displacement by elastic elements which act as primary ... unbalance in the bridge circuit, producing an output voltage proportional to the applied pressure.

State Hall effect. Explain in brief operation of hall effect transducer with its suitable applications.

Description : State Hall effect. Explain in brief operation of hall effect transducer with its suitable applications.

Last Answer : Principle: The principle of working of a Hall Effect Transducer is that if a strip of conducting material carries' a current in the presence of a transverse magnetic field, a difference of ... a transverse magnetic field passes through the strip, an output voltage appears across the output leads.

State two examples of active transducer.

Description : State two examples of active transducer.

Last Answer : Examples of active transducer: 1. Thermocouple 2. photovoltaic cells (solar cells) 3. Piezoelectric crystals. 4. Thermoelectric 5. Magnetostrictive 6. Electrokinetic

State two examples of passive transducer.

Description : State two examples of passive transducer.

Last Answer : Examples of passive transducer: 1. LDR 2. Thermistor 3. Strain Gauge 4. Resistive transducers. 5. Inductive transducers. 6. Photoconductive 7. Capacitive transducers. 8. Magnetoresistive 9. Thermoresistive 10. Electroresistive 11. RTD

Compare primary and secondary transducer (any two points).

Description : Compare primary and secondary transducer (any two points).

Last Answer : i) Primary Transducer: The detector or sensing element which senses the physical phenomenon and converts it into a measurable quantity, whose output forms the input of another transducer is ... analogous output of primary transducer into an electrical quantity is called a secondary transducer.

Classify transducer in detail.

Description : Classify transducer in detail.

Last Answer : 1. Active and Passive transducers. 2. Analog and digital transducers. 3. Primary and secondary transducers. 4. Electrical and mechanical transducers. 5. Transducers and inverse transducers. 

Compare active and passive transducer.

Description : Compare active and passive transducer.

Last Answer : Active Transducer Passive transducer Don't require external power for operation. Require external power supply for operation. It is also called selfgenerating transducer. It ... energy controlling Principle. Ex-Thermocouple, piezoelectric. Ex Thermistor, Strain Gauges.

State the necessity of transducer.

Description : State the necessity of transducer.

Last Answer : Necessity of Transducer: Input quantity for most of the Instrumentation systems is non - electrical quantity. To convert non- electrical quantities like heat, pressure, level, flow rate, ... use electrical methods and techniques for measurement, manipulation and control, transducers are required.

Define transducer. Give two examples.

Description : Define transducer. Give two examples.

Last Answer : Transducer - It converts one form of signal into another form. A transducer is a device that is used to convert a physical quantity into its corresponding electrical signal.  Classification - 1. Active transducer 2. Passive transducer 

A strain gauge is a passive transducer and is employed for converting

Description : A strain gauge is a passive transducer and is employed for converting   (a) Pressure into change in resistance (b) Force into displacement (c) Mechanical displacement into a change of resistance (d) None of the above 

Last Answer : A

An inverse transducer converts

Description : An inverse transducer converts   (a) electrical energy to any other form of energy (b) electrical energy to light energy (c) mechanical displacement into electrical signal (d) electrical energy to mechanical form  

Last Answer : A

In preparation for developing the acceptance criteria, the user should A. Know the defects in the application B. Acquire the basic knowledge of the application for which the system is intended C. Understand the risks and benefits of the development methodology that is to be used in correcting the software system D. Know new enhancement and basic understanding of how the application is implemented in users organization

Description : In preparation for developing the acceptance criteria, the user should A. Know the defects in the application B. Acquire the basic knowledge of the application for which the system is ... D. Know new enhancement and basic understanding of how the application is implemented in users organization

Last Answer : Understand the risks and benefits of the development methodology that is to be used in correcting the software system

State any four factors for selecting location of nuclear power plant.

Description : State any four factors for selecting location of nuclear power plant.

Last Answer : i) Seismicity: If the area of a nuclear site is seismically active, it may not be used for nuclear power plant.  ii) Water Availability: The nuclear power plants would need a ... Therefore, the site selected for such plant should have adequate arrangement for the disposal of radioactive waste.

A complex anion is formed by Osmium ( in some oxidation state ) with ligands ( in proper number so that coordination number of osmium becomes six ). W

Description : A complex anion is formed by Osmium ( in some oxidation state ) with ligands ( in proper number so that coordination number of osmium becomes six ). W

Last Answer : A complex anion is formed by Osmium ( in some oxidation state ) with ligands ( in proper number ... ) C. azidopentachloridoosmate(VI) D. None of these

A complex cation is formed by Pt( in some oxidation state ) with ligands ( in proper number so that coordination number of Pt becomes six ). Which of

Description : A complex cation is formed by Pt( in some oxidation state ) with ligands ( in proper number so that coordination number of Pt becomes six ). Which of

Last Answer : A complex cation is formed by Pt( in some oxidation state ) with ligands ( in proper number ... (ethylenediamine ) dithiocyanate -S- platinum (IV) ion

Project close out check list do not include the followings A. Confirm the customer satisfaction B. Check that all the project criteria of the project have been met C. Confirm all the deliverables have been given to the customer D. Changes suggested by Stockholder have not been delivered

Description : Project close out check list do not include the followings A. Confirm the customer satisfaction  B. Check that all the project criteria of the project have been met C. Confirm all the deliverables have been given to the customer  D. Changes suggested by Stockholder have not been delivered

Last Answer : D. Changes suggested by Stockholder have not been delivered

Explain the criteria of selection of power transformer.

Description : Explain the criteria of selection of power transformer.

Last Answer : Selection Criteria for Power Transformer:  1) Ratings - The kVA ratings should comply with IS:10028 (Part l)-1985. The noload secondary voltage should be 5 % more than nominal voltage to ... ) Cooling - The transformers covered in this group are generally ONAN, ONAN/ONAF, ONAN/ONAF/OFAF.

Give the criteria for selection of distribution transformer as per IS:10028 (part-I) 1985.

Description : Give the criteria for selection of distribution transformer as per IS:10028 (part-I) 1985.

Last Answer : Criteria for selection of distribution transformer as per IS:10028 (part-I) 1985: 1) Total connected load. 2) Load Diversity factor. 3) Expected daily load curve. 4) Type of loads: ( ... or trends or forecasting. 10) Ambient conditions for deciding insulation class. 11) Tap changing requirement.

Write selection criteria of distribution transformer with any four points.

Description : Write selection criteria of distribution transformer with any four points.

Last Answer : Selection Criteria for Distribution Transformer:  i) Ratings - The kVA ratings should comply with IS:2026 ( Part l )-1977*. The noload secondary voltage should be 433 volts for transformers to be ... is not necessary. vi) Cooling - The transformers covered in this group are generally ONAN, AN

State type of feedback used for oscillator circuit. Explain Barkhausen criteria.

Description : State type of feedback used for oscillator circuit. Explain Barkhausen criteria.

Last Answer : Concept of feedback: Feedback is process to fed back part of output to the input. Feed back concept is introduced in amplifier to improve the parameters of amplifier like voltage gain, current gain ... signal  d) Voltage shunt: Output signal is voltage signal, feedback signal is current signal. 

What does transducer mean ?

Description : What does transducer mean ?

Last Answer : Transducer is a mechanical technique that converts the energy or information carrying a physical quantity into another constellation. Mercury thermometers placed in glass are a very common modifier. It converts ... a different level of the same sign ; Such as: electric converter or mechanical lever.

What is the definition of transducer ?

Description : What is the definition of transducer ?

Last Answer : All electrical and electronic devices that convert one type of energy into another type of energy are called transducers. Transducers typically convert electrical energy into mechanical or mechanical energy into electrical energy , such as microphones , loudspeakers , headphones, and so on.

What is a transducer ?

Description : What is a transducer ?

Last Answer : All electrical and electronic devices that convert one type of energy into another type of energy are called transducers. Transducers typically convert electrical energy into mechanical or mechanical energy into electrical energy , such as microphones , loudspeakers , headphones, and so on.

Active Transducer What? What ?

Last Answer : Active Transducer Hall - Pizzo Electric Transducer Photos Voltaic The cell , the thermocouple , the thermopile