State selection criteria of transducer.

State selection criteria of transducer.
by

3 Answers

Answer :

1. Operating range 2. Operating principle. 3. Sensitivity 4. Accuracy 5. Frequency response and resonant frequency 6. Errors 7. Environmental compatibility 8. Usage and ruggedness 9. Electrical aspect 10. Stability and Reliability 11. Loading effect 12. Static characteristics 13. General selection criteria.
by

Answer :

1) Nature of input and output 2) Operating principle 3) Type of transducer 4) Accuracy 5) Size 6) Weight 7) Availability 8) Alternatives 
by

Answer :

* Operating Principle : The transducers are selected on the basis of operating principle it may be resistive, inductive, capacitive, optical etc. 

* Operating range : The range of transducer should be appropriate for measurement to get a good resolution. 

* Accuracy : The accuracy should be as high as possible or as per the measurement. 

* Range : The transducer can give good result within its specified range, so select transducer as per the operating range. 

* Sensitivity : The transducer should be more sensitive to produce the output or sensitivity should be as per requirement. 

* Loading effect : The transducer’s input impedance should be high and output impedance should be low to avoid loading effect. 

* Errors : The error produced by the transducer should be low as possible. 

* Environmental compatibility : The transducer should maintain input and output characteristic for the selected environmental condition. 
by

Related questions

List any six criteria for selecting a proper transducer for an application.

Description : List any six criteria for selecting a proper transducer for an application.

Last Answer : Criteria for selecting a transducer for an application: 1. Electrical output of transducer (Current/voltage) 2. Range of measurement i.e maximum and minimum values of parameter to be measured. ... . 11. Loading effect. 12. Stability & Reliability of transducer 13. Cost and availability

Explain the criteria of selection of power transformer.

Description : Explain the criteria of selection of power transformer.

Last Answer : Selection Criteria for Power Transformer:  1) Ratings - The kVA ratings should comply with IS:10028 (Part l)-1985. The noload secondary voltage should be 5 % more than nominal voltage to ... ) Cooling - The transformers covered in this group are generally ONAN, ONAN/ONAF, ONAN/ONAF/OFAF.

Give the criteria for selection of distribution transformer as per IS:10028 (part-I) 1985.

Description : Give the criteria for selection of distribution transformer as per IS:10028 (part-I) 1985.

Last Answer : Criteria for selection of distribution transformer as per IS:10028 (part-I) 1985: 1) Total connected load. 2) Load Diversity factor. 3) Expected daily load curve. 4) Type of loads: ( ... or trends or forecasting. 10) Ambient conditions for deciding insulation class. 11) Tap changing requirement.

Write selection criteria of distribution transformer with any four points.

Description : Write selection criteria of distribution transformer with any four points.

Last Answer : Selection Criteria for Distribution Transformer:  i) Ratings - The kVA ratings should comply with IS:2026 ( Part l )-1977*. The noload secondary voltage should be 433 volts for transformers to be ... is not necessary. vi) Cooling - The transformers covered in this group are generally ONAN, AN

The following should be considered while selection a transducer: -

Description : The following should be considered while selection a transducer: -  a) Sensitivity b) Operating Range c) Frequency Response d) All the above

Last Answer : The following should be considered while selection a transducer: -   All the above

State the selection criteria for transducers

Description : State the selection criteria for transducers

Last Answer : 1. Operating range 2. Operating principle 3. Sensitivity 4. Accuracy 5. Frequency response and resonant frequency 6. Errors 7. Environmental compatibility 8. Usage and ruggedness. 9. ... . 10. Stability and Reliability 11. Loading effect 12. Static characteristics 13. Noise immunity

State criteria for selection of contractor.

Description : State criteria for selection of contractor. 

Last Answer : Following the criteria for selection of contractor: 1. Contractor should be well reputed 2. Past experience of the Contractor 3. Contractor licenses should be valid 4. Works in hand of ... Material availability of the contractor. 6. Tax clearance certificate & financial power of contractor.

What is the selection criteria to shortlist candidates for admissions in top MBA colleges?

Description : What is the selection criteria to shortlist candidates for admissions in top MBA colleges?

Last Answer : MBA Admission 2020, has been stressful due to the present Covid-19 situation and lockdown in India. Students who had appeared for CAT, XAT, or GMAT had to have their admissions postponed. ... merit list. Students who haven’t appeared for the common entrance examinations may also apply for the cour

What are decision models? A. Project selection criteria B. Project selection methods C. Project selection committees D. Project resource and budget selection methods

Description : What are decision models?  A. Project selection criteria B. Project selection methods C. Project selection committees D. Project resource and budget selection methods

Last Answer : B. Project selection methods

Mathematical models using linear, dynamic, integer, or algorithm models are considered A. Project selection criteria B. A form of expert judgment C. Project selection methods D. A form of historical information

Description : Mathematical models using linear, dynamic, integer, or algorithm models are  considered  A. Project selection criteria B. A form of expert judgment C. Project selection methods D. A form of historical information

Last Answer : C. Project selection methods

From which of the following is selection criteria of robots. (A) Payload (B) Work volume (C) Speed (D) All of the above

Description : From which of the following is selection criteria of robots. (A) Payload (B) Work volume (C) Speed (D) All of the above

Last Answer : D

Explain the criteria of site selection for following cottage industry.

Description : Explain the criteria of site selection for following cottage industry.

Last Answer : i) Bricks Manufacturing: 1) The ground should be plain surface. 2) The site of brick manufacturing should be connected with road for transportation of materials. 3) Good brick earth should ... for installation of crushing plant. 7) It should have arrangement of electricity to operate crushers.

Explain the criteria for selection of construction materials for different civil engineering Structures on basis of their strength and durability

Description : Explain the criteria for selection of construction materials for different civil engineering Structures on basis of their strength and durability

Last Answer : The material must be selected for their ability to support the loads imposed by the building over the whole life of the building. An appropriate structural system and correct selection of ... of the building. The construction material should have sufficient strength to carry the prescribed load.

Describe the selection criteria for selecting stone for face work of building.

Description : Describe the selection criteria for selecting stone for face work of building. 

Last Answer : 1. Appearance: Stone to be used for construction should be decent in appearance and have uniform colour 2. Durability: A Good building stone should be durable i.e. it should resist atmospheric action ... it should not catch fire easily. 8. Seasoning: Stones should be well seasoned before use.

If you select a monitor in your class, which criteria will be followed by you in this selection? Options: A) On the basis of democratic(Through election) B) On the basis of physical make-up C) On the basis of superiority in the class D) On the basis of personal preference

Description : If you select a monitor in your class, which criteria will be followed by you in this selection? Options: A) On the basis of democratic(Through election) B) On the basis of physical make-up C) On the basis of superiority in the class D) On the basis of personal preference

Last Answer : A) On the basis of democratic(Through election) 

Give any four selection criteria for selecting network topology.

Description : Give any four selection criteria for selecting network topology.

Last Answer : Selection criteria for selecting network topology. 1. Size of the network & number of devices or nodes being connected. 2. Ease of configuration & installing. 3. The ease of adding new device in an ... hubs etc. 7. Costs involved. 8. Need of security. 9. Need of network administration. 

Write the criteria for selection of nozzle for given situation.

Description : Write the criteria for selection of nozzle for given situation.

Last Answer : Following are the situation for selection criteria of nozzle.  Situation first: It is used when the back pressure is equal or more than the critical pressure ratio. It is also used ... nozzle: Cross sectional area of nozzle first continuously decreases and then increases from entrance to exit.

Selection Criteria of PLC

Description : Selection Criteria of PLC

Last Answer : Selection criteria :- To select PLC for any particular application following points are to be considered. a) Type of PLC: Analog or Digital b) Number of inputs and outputs to PLC c) Operating voltage ... Type of memory of PLC g) Type of programming h) Reliability of PLC i) Flexibility of PLC

What are the criteria for selection of site for hydroelectric power plant?

Description : What are the criteria for selection of site for hydroelectric power plant?

Last Answer : Following Factors to be kept while site selecting for Hydro power plant:  1. It should be located where high rain fall occurs. 2. A large catchments area must be available to store water. 3. It ... 12. Cost of land should be less. 13. Skilled and unskilled man power should be available nearby.

State principle of operation of piezo-electric transducer. State its application.

Description : State principle of operation of piezo-electric transducer. State its application.

Last Answer : The piezoelectric element used for converting mechanical movement into electric signals. The mechanical deformation generates charges and this charge appears as a voltage across the electrodes.  ... destructive test (NDT) equipments 6. Piezoelectric materials are used in ultrasonic transducers. 

State the use of RADAR type level transducer & list two advantages.

Description : State the use of RADAR type level transducer & list two advantages.

Last Answer : Applications of radar type transducer: i) RADAR type level transducer is suitable for large tanks with range upto 200m for level measurement. ii) It is used for continuous level measurement. ... iii) Not affected by corrosive materials. iv) Can be used for hard to handle' applications.

State Hall effect. Explain in brief operation of hall effect transducer with its suitable applications.

Description : State Hall effect. Explain in brief operation of hall effect transducer with its suitable applications.

Last Answer : Principle: The principle of working of a Hall Effect Transducer is that if a strip of conducting material carries' a current in the presence of a transverse magnetic field, a difference of ... a transverse magnetic field passes through the strip, an output voltage appears across the output leads.

State two examples of active transducer.

Description : State two examples of active transducer.

Last Answer : Examples of active transducer: 1. Thermocouple 2. photovoltaic cells (solar cells) 3. Piezoelectric crystals. 4. Thermoelectric 5. Magnetostrictive 6. Electrokinetic

State two examples of passive transducer.

Description : State two examples of passive transducer.

Last Answer : Examples of passive transducer: 1. LDR 2. Thermistor 3. Strain Gauge 4. Resistive transducers. 5. Inductive transducers. 6. Photoconductive 7. Capacitive transducers. 8. Magnetoresistive 9. Thermoresistive 10. Electroresistive 11. RTD

State the necessity of transducer.

Description : State the necessity of transducer.

Last Answer : Necessity of Transducer: Input quantity for most of the Instrumentation systems is non - electrical quantity. To convert non- electrical quantities like heat, pressure, level, flow rate, ... use electrical methods and techniques for measurement, manipulation and control, transducers are required.

Write example of each type (i) Primary transducer (ii) Active transducer (iii) Electrical transducer (iv) Digital transducer

Description : Write example of each type (i) Primary transducer (ii) Active transducer (iii) Electrical transducer (iv) Digital transducer

Last Answer : (i) Active transducer:-Thermocouple, piezoelectric, photovoltaic cell (ii) Primary transducer:- Bourdon tube, bellows, (iii) Electrical transducer.:- LVDT,RVDT, Hall effect, strain gauge, ... , optical pyrometer, radiation pyrometer (iv) Digital transducer:- Linear Encoder, digital taco generator

List any two materials for Piezoelectric transducer.

Description : List any two materials for Piezoelectric transducer.

Last Answer : i) Quartz crystal, ii) Barium titanete , iii) Rochelle salt , iv) Lithium Sulphate, v) Potassium Dihydrogen phosphate.

Classify transducer. Write one sentence about each of them.

Description : Classify transducer. Write one sentence about each of them.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Explain how AC current is measured using hall effect transducer.

Description : Explain how AC current is measured using hall effect transducer. 

Last Answer : This type of sensor works on a simple electromagnetic principle.  In above diagram of the Hall effect. A current is conducted through a thin piece of foil from terminal I and ground. ... called the Hall-effect voltage is produced at the terminals attached to the opposite sides of the foil.

Discuss any 4 points to be considered while selecting a transducer for its intended applications.

Description : Discuss any 4 points to be considered while selecting a transducer for its intended applications. 

Last Answer : 1. Operating range 2. Operating principle 3. Sensitivity 4. Accuracy 5. Frequency response and resonant frequency 6. Errors 7. Environmental compatibility 8. Usage and ruggedness. 9. ... 10. Stability and Reliability 11. Loading effect 12. Static characteristics 13. General selection criteria

Define the term Transducer and sensor.

Description : Define the term Transducer and sensor.

Last Answer : Transducer : Transducer is defined as a device which converts one form of energy into another form. Sensor : Sensor is a device which detects or measures a physical property and records, indicates, or otherwise responds to it.

Explain in brief AC Current , RMS Indication using Hall Effect Transducer.

Description : Explain in brief AC Current , RMS Indication using Hall Effect Transducer.

Last Answer : When an ac current passes through the conductor it sets up a magnetic field around the conductor. This magnetic field is proportional to the current. A Hall Effect Transducer is placed in a ... flowing in the conductor. In this way, the current is measured using the Hall effect transducer. 

Draw and explain in brief speed measurement using non-contact type transducer.

Description : Draw and explain in brief speed measurement using non-contact type transducer. 

Last Answer :  i) Photoelectric Tachometer:  This method of measuring speed consists of mounting an opaque disc on the rotating shaft. The disc has a number of equidistant holes on its periphery. At one side of the disc a light source is ... (pulses per second /number of teeth)  = (P/T) rps = (P/T) *60 rpm.

Draw and explain the operation of pressure transducer having diaphragm as a primary sensor and four strain gauges as secondary sensors.

Description : Draw and explain the operation of pressure transducer having diaphragm as a primary sensor and four strain gauges as secondary sensors.

Last Answer : Pressure measurement with strain gauges on diaphragm: Description: This method uses the principle of converting pressure into a displacement by elastic elements which act as primary ... unbalance in the bridge circuit, producing an output voltage proportional to the applied pressure.

Compare primary and secondary transducer (any two points).

Description : Compare primary and secondary transducer (any two points).

Last Answer : i) Primary Transducer: The detector or sensing element which senses the physical phenomenon and converts it into a measurable quantity, whose output forms the input of another transducer is ... analogous output of primary transducer into an electrical quantity is called a secondary transducer.

List non contact type transducer and compare them on the basis of any two factors.

Description : List non contact type transducer and compare them on the basis of any two factors.

Last Answer : Magnetic pick-up Photoelectric This tachometer generator consists of a metallic tooth rotor mounted on the shaft whose speed is to be measured. This method of measuring speed of rotation ... by an electronic counter which can be directly calibrated in terms of speed in rpm.

List two advantages and disadvantages of photoelectric pickup transducer.

Description : List two advantages and disadvantages of photoelectric pickup transducer.

Last Answer : Advantages : 1. No direct physical contact of the meter with rotating shaft whose speed to be measured. Hence no additional load on the shaft. 2. Output is in digital format. 3. No A/D converted ... (typically 50,000 hours.) 2. The accuracy of meter depends on the error represented by one pulse.

Classify transducer in detail.

Description : Classify transducer in detail.

Last Answer : 1. Active and Passive transducers. 2. Analog and digital transducers. 3. Primary and secondary transducers. 4. Electrical and mechanical transducers. 5. Transducers and inverse transducers. 

Compare active and passive transducer.

Description : Compare active and passive transducer.

Last Answer : Active Transducer Passive transducer Don't require external power for operation. Require external power supply for operation. It is also called selfgenerating transducer. It ... energy controlling Principle. Ex-Thermocouple, piezoelectric. Ex Thermistor, Strain Gauges.

List four electric pressure transducer.

Description : List four electric pressure transducer.

Last Answer : List of electric pressure measuring devices: 1. Diaphragm with strain gauge 2. Bourdon Tube with LVDT 3. Differential Pressure cell 4. Piezoelectric type pressure transducer 5. Capacitance pressure transducer 6. Optical Pressure transducer 7. Resistive pressure transducer 

Define transducer. Give two examples.

Description : Define transducer. Give two examples.

Last Answer : Transducer - It converts one form of signal into another form. A transducer is a device that is used to convert a physical quantity into its corresponding electrical signal.  Classification - 1. Active transducer 2. Passive transducer 

A strain gauge is a passive transducer and is employed for converting

Description : A strain gauge is a passive transducer and is employed for converting   (a) Pressure into change in resistance (b) Force into displacement (c) Mechanical displacement into a change of resistance (d) None of the above 

Last Answer : A

An inverse transducer converts

Description : An inverse transducer converts   (a) electrical energy to any other form of energy (b) electrical energy to light energy (c) mechanical displacement into electrical signal (d) electrical energy to mechanical form  

Last Answer : A

State type of feedback used for oscillator circuit. Explain Barkhausen criteria.

Description : State type of feedback used for oscillator circuit. Explain Barkhausen criteria.

Last Answer : Concept of feedback: Feedback is process to fed back part of output to the input. Feed back concept is introduced in amplifier to improve the parameters of amplifier like voltage gain, current gain ... signal  d) Voltage shunt: Output signal is voltage signal, feedback signal is current signal. 

Explain Piezo-electric transducer with diagram. State its applications, advantages and disadvantages.

Description : Explain Piezo-electric transducer with diagram. State its applications, advantages and disadvantages.

Last Answer : Explanation: Principle of operation: When a pressure or force or vibration applied to the crystalline material like quartz crystal or crystalline substances then an e.m.f. is generated across the ... destructive test (NDT) equipment's 4) Piezoelectric materials are use in ultrasonic transducers.

State working principle of piezoelectric transducer with diagram.

Description : State working principle of piezoelectric transducer with diagram.

Last Answer : Working principle: When force or pressure is applied to the piezoelectric material like quartz crystal or barium titanate, then an e.m.f. is generated across the material or vice versa ... deformation generates a charges and this charges appears as a voltage across the electrodes.

Define transducer. State factors which are considered while selecting transducer for a particular application.

Description : Define transducer. State factors which are considered while selecting transducer for a particular application.

Last Answer : Transducer - It converts one form of signal into another form. A transducer is a device that is used to convert a physical quantity into its corresponding electrical signal. ... compatibility : The transducer should maintain input and output characteristic for the selected environmental condition.

What does transducer mean ?

Description : What does transducer mean ?

Last Answer : Transducer is a mechanical technique that converts the energy or information carrying a physical quantity into another constellation. Mercury thermometers placed in glass are a very common modifier. It converts ... a different level of the same sign ; Such as: electric converter or mechanical lever.

What is the definition of transducer ?

Description : What is the definition of transducer ?

Last Answer : All electrical and electronic devices that convert one type of energy into another type of energy are called transducers. Transducers typically convert electrical energy into mechanical or mechanical energy into electrical energy , such as microphones , loudspeakers , headphones, and so on.

What is a transducer ?

Description : What is a transducer ?

Last Answer : All electrical and electronic devices that convert one type of energy into another type of energy are called transducers. Transducers typically convert electrical energy into mechanical or mechanical energy into electrical energy , such as microphones , loudspeakers , headphones, and so on.