The intel 8086 microprocessor is a _______ processor A. 8 bit B. 16 bit C. 32 bit D. 4 bit

1 Answer

Answer :

The intel 8086 microprocessor is a 16 bit processor 

Related questions

Description : The 16 bit flag of 8086 microprocessor is responsible to indicate ___________ A. the condition of result of ALU operation B. the condition of memory C. the result of addition D. the result of subtraction 

Last Answer : The 16 bit flag of 8086 microprocessor is responsible to indicate the condition of result of ALU operation

Description : In 8086 microprocessor , the address bus is ________ bit wide A. 12 bit B. 10 bit C. 16 bit D. 20 bit

Last Answer : In 8086 microprocessor, the address bus is 20 bit

Description : Which processor provided 1 MB memory: a. 16-bit 8086 and 8088 b. 32-bit 8086 and 8088 c. 64-bit 8086 and 8088 d. 8-bit 8086 and 8088

Last Answer : a. 16-bit 8086 and 8088

Description : The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register

Last Answer : The microprocessor can read/write 16 bit data from or to memory 

Description : How many bit microprocessor developed by Intel: a. 4 bit b. 8 bit c. 32 bit d. 64 bit

Last Answer : b. 8 bit

Description : Which is 16 Bit microprocessor: a. 8088 b. 8086 c. 8085 d. All of these

Last Answer : d. All of these

Description : Write an algorithm to subtract two 16 bit numbers (With borrow) in 8086 microprocessor.

Last Answer : Algorithm for 16 bit numbers subtraction with borrow: 1. Load 0000H into CX register (for borrow) 2. Load the first number into AX(accumulator) 3. Load the second number into BX register 4. Subtract ... . Move data from AX(accumulator) to memory 8. Move data from CX register to memory 9. Stop

Description : Who was introduce the 80286 microprocessor updated on 8086,in 1983: a. Intel b. Motorola c. Fairchild d. None of these

Last Answer : a. Intel

Description :  In a 16-bit microprocessor, a single word is A) 16 bit data B) 32 bit data C) 8 bit data D) 64 bit data 

Last Answer :  In a 16-bit microprocessor, a single word is 16 bit data

Description : 8086 is interfaced to two 8259s (Programmable interrupt controllers). If 8259s are in master slave configuration the number of interrupts available to the 8086 microprocessor is a) 8 b) 16 c) 15 d) 64

Last Answer : a) 8

Description : How many bit MC6800 microprocessor: a. 4-bit b. 8-bit c. 16-bit d. 32-bit

Last Answer : b. 8-bit

Description : How many bit microprocessor in the era marked beginning of fourth generation: a. 4 bit b. 8 bit c. 16 bit d. 32 bit

Last Answer : d. 32 bit

Description : The first processor to include Virtual memory in the Intel microprocessor familywas: a.)80286 b.)80386c.)80486d.)Pentium

Last Answer : a.)80286

Description : Calculator are based on______ microprocessor: a. 4 bit b. 16 bit c. 32 bit d. 64 bit

Last Answer : a. 4 bit

Description : How many bit microprocessor still survives in low-end application such as microwave ovens and small control system: a. 4 bit b. 16 bit c. 32 bit d. 64 bit

Last Answer : a. 4 bit

Description : Microprocessor is a/an _______ circuit that functions as the CPU of the compute  A. electronic B. mechanic C. integrating D. processing

Last Answer : Microprocessor is a/an electronic  circuit that functions as the CPU of the compute 

Description : A microprocessor is a _______ chip integrating all the functions of a CPU of a computer.  A. multiple B. single C. double D. triple

Last Answer : A microprocessor is a single chip integrating all the functions of a CPU of a computer.

Description : A 32-bit address bus allows access to a memory of capacity(a) 64 Mb (b) 16 Mb (c) 1Gb (d) 4 Gb 2.Which processor structure is pipelined? a) all x80 processors b) all x85 processors c) all x86 processors

Last Answer : c) all x86 processors

Description : The evolution of the 4 bit microprocessor ended when Intel released in: a. 4004 b. 8008 c. 40964 d. 4040

Last Answer : d. 4040

Description : bit Microprocessor __________ a) Intel 4040 b) Pentium – I c) 8088 d) Motorala MC-6801

Last Answer : d) Motorala MC-6801

Description : Intel 8096 is of ___ bit microcontroller family called as ______. a) 8, MCS51 b) 16, MCS51 c) 8, MCS96 d) 16, MCS96

Last Answer : d) 16, MCS96

Description : Intel 8096 is of ___ bit microcontroller family called as ______. a) 8, MCS51 b) 16, MCS51 c) 8, MCS96 d) 16, MCS96

Last Answer : d) 16, MCS96

Description : Intel used HMOS technology to recreate_____: a. 8084 A b. 8086 A c. 8085 A d. 8088 A

Last Answer : c. 8085 A

Description : A 32 bit microprocessor has the word length equal to a. 2 byte b. 32 byte c. 4 byte d. 8 byte

Last Answer : c. 4 byte

Description : How bit microprocessor inexpensive a separate interface is provided with I/O device: a. 2 bit b. 4 bit c. 8 bit d. 32 bit

Last Answer : c. 8 bit

Description : Motorola introduced _____ processor: a. 2 bit-RISC b. 4 bit-RISC c. 8 bit-RISC d. 32 bit-RISC

Last Answer : d. 32 bit-RISC

Description : To read or write a complete word from / to the memory in 8086 microprocessor and if it is located at an even address, the number of Read or Write cycles required is

Last Answer : To read or write a complete word from / to the memory in 8086 microprocessor and if it is located at an even address, the number of Read or Write cycles required is one

Description : Third generation microprocessor is dominated by____ microprocessor: a. 8 bit b. 4 bit c. 16 bit d. 64 bit

Last Answer : c. 16 bit

Description : The beginning of very efficient____ microprocessor in second generation: a. 4-bit b. 8-bit c. 16-bit d. 64-bit

Last Answer : b. 8-bit

Description : A stack is a. an 8-bit register in the microprocessor b. a 16-bit register in the microprocessor c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Last Answer : c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Description : How many speed of 8088,8085,8086 microprocessor: a. 2.5 Million instruction per second b. 1.5 Million instruction per second c. 3.5 Million instruction per second d. 1.6 Million instruction per second

Last Answer : a. 2.5 Million instruction per second

Description : In 8086 microprocessor one of the following instructions is executed before an arithmeticoperation a. AAM b) AAD c) DAS d) DAA

Last Answer : b) AAD

Description : In 8086 microprocessor one of the following statements is not true.a)Coprocessor is interfaced in MAX mode b)Coprocessor is interfaced in MIN mode c)I/O can be interfaced in MAX / MIN moded)Supports pipelining

Last Answer : b)Coprocessor is interfaced in MIN mode

Description : 8086 microprocessor is interfaced to 8253 a programmable interval timer. The maximum number by which the clock frequency on one of the timers is divided by a) 216 b) 28 c) 210 d) 220

Last Answer : d) 220

Description : In 8086 microprocessor one of the following instructions is executed before an arithmetic operation a) AAM b) AAD c) DAS d) DAA

Last Answer : b) AAD

Description : 8088 microprocessor differs with 8086 microprocessor in a) Data width on the output b) Address capability c) Support of coprocessor d) Support of MAX / MIN mode

Last Answer : a) Data width on the output

Description : In 8086 microprocessor one of the following statements is not true. a) Coprocessor is interfaced in MAX mode b) Coprocessor is interfaced in MIN mode c) I/O can be interfaced in MAX / MIN mode

Last Answer : b) Coprocessor is interfaced in MIN mode

Description : n 8086 microprocessor the following has the highest priority among all type interrupts. a) NMI b) DIV 0 c) TYPE 255 d) OVER FLOW

Last Answer : a) NMI

Description : BHE of 8086 microprocessor signal is used to interface the a) Even bank memory b) Odd bank memory c) I/O d) DMA

Last Answer : b) Odd bank memory

Description : Enlist any four addressing modes of 8086 microprocessor.

Last Answer : Addressing modes of 8086 : 1. Immediate 2. Direct 3. Register 4. Register indirect 5. Indexed 6. Register relative 7. Based indexed 8. Relative based indexed 9. Implied

Description : State the use of OF and DF flags of 8086 microprocessor.

Last Answer : Overflow Flag: This flag is set if an overflow occurs, i.e. if the result of a signed operation is large enough to be accommodated in destination register. Direction Flag: It selects either increment or decrement mode for DI &/or SI register during string instructions.

Description : Describe the functions of General purpose registers of 8086 microprocessor.

Last Answer : (i) General Purpose Registers of 8086 1. AX (Accumulator) - Used to store the result for arithmetic / logical operations All I/O data transfer using IN & OUT instructions use A ... Index - acts as the destination for string movement instructions Used to hold offset address of Extra segment.

Description : Which is the microprocessor launched by Intel: a. Z-8 b. 8080 c. 8000 d. None of these

Last Answer : b. 8080

Description : Which is not the main feature of DEC Alpha: a. 64 Bit RISC processor b. Designed to replace 32 VAX(CISC) c. Seven stage split integer/floating point pipeline d. Variable Instruction length

Last Answer : d. Variable Instruction length

Description : Motorola introduced 32 bit RISC processor called______: a. MC 88100 b. MC 81100 c. MC 80100 d. MC 81000

Last Answer : a. MC 88100

Description : The purpose of the microprocessor is to control ______  A. memory B. switches C. processing D. tasks

Last Answer : The purpose of the microprocessor is to control memory 

Description : Microprocessor is the ______ of the computer and it perform all the computational tasks  A. main B. heart C. important D. simple

Last Answer : Microprocessor is the heart of the computer and it performs all the computational tasks

Description : The 8085 Microprocessor has A) 8-bits Data bus and 16-bits Address bus B) 8-bits Data bus and 8-bits Address bus C) 16-bits Data bus and 16-bits Address bus D) 32-bits Data bus and 8-bits Address bus 

Last Answer : B) 8-bits Data bus and 8-bits Address bus. 

Description : In the 8085A Microprocessor, arithmetic and logical operations are performed through which of the following? A) Stack B) ALU C) I/O D) Register 

Last Answer : In the 8085A Microprocessor, arithmetic and logical operations are performed through which of the following? A) Stack B) ALU C) I/O D) Register 

Description : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Last Answer : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs