Description : In 8086 microprocessor one of the following instructions is executed before an arithmetic operation a) AAM b) AAD c) DAS d) DAA
Last Answer : b) AAD
Description : Explain LDA, STA and DAA instructions
Last Answer : LDA copies the data byte into accumulator from the memory location specified by the 16-bit address. STA copies the data byte from theaccumulator in the memory location specified by 16-bit address. DAA changes the contents of the accumulator from binary to 4-bit BCD digits.
Description : Who was introduce the 80286 microprocessor updated on 8086,in 1983: a. Intel b. Motorola c. Fairchild d. None of these
Last Answer : a. Intel
Description : How many speed of 8088,8085,8086 microprocessor: a. 2.5 Million instruction per second b. 1.5 Million instruction per second c. 3.5 Million instruction per second d. 1.6 Million instruction per second
Last Answer : a. 2.5 Million instruction per second
Description : Which is 16 Bit microprocessor: a. 8088 b. 8086 c. 8085 d. All of these
Last Answer : d. All of these
Description : In 8086 microprocessor one of the following statements is not true.a)Coprocessor is interfaced in MAX mode b)Coprocessor is interfaced in MIN mode c)I/O can be interfaced in MAX / MIN moded)Supports pipelining
Last Answer : b)Coprocessor is interfaced in MIN mode
Description : 8086 is interfaced to two 8259s (Programmable interrupt controllers). If 8259s are in master slave configuration the number of interrupts available to the 8086 microprocessor is a) 8 b) 16 c) 15 d) 64
Last Answer : a) 8
Description : 8086 microprocessor is interfaced to 8253 a programmable interval timer. The maximum number by which the clock frequency on one of the timers is divided by a) 216 b) 28 c) 210 d) 220
Last Answer : d) 220
Description : 8088 microprocessor differs with 8086 microprocessor in a) Data width on the output b) Address capability c) Support of coprocessor d) Support of MAX / MIN mode
Last Answer : a) Data width on the output
Description : In 8086 microprocessor one of the following statements is not true. a) Coprocessor is interfaced in MAX mode b) Coprocessor is interfaced in MIN mode c) I/O can be interfaced in MAX / MIN mode
Last Answer : b) Coprocessor is interfaced in MIN mode
Description : n 8086 microprocessor the following has the highest priority among all type interrupts. a) NMI b) DIV 0 c) TYPE 255 d) OVER FLOW
Last Answer : a) NMI
Description : BHE of 8086 microprocessor signal is used to interface the a) Even bank memory b) Odd bank memory c) I/O d) DMA
Last Answer : b) Odd bank memory
Description : Write an algorithm to subtract two 16 bit numbers (With borrow) in 8086 microprocessor.
Last Answer : Algorithm for 16 bit numbers subtraction with borrow: 1. Load 0000H into CX register (for borrow) 2. Load the first number into AX(accumulator) 3. Load the second number into BX register 4. Subtract ... . Move data from AX(accumulator) to memory 8. Move data from CX register to memory 9. Stop
Description : Enlist any four addressing modes of 8086 microprocessor.
Last Answer : Addressing modes of 8086 : 1. Immediate 2. Direct 3. Register 4. Register indirect 5. Indexed 6. Register relative 7. Based indexed 8. Relative based indexed 9. Implied
Description : State the use of OF and DF flags of 8086 microprocessor.
Last Answer : Overflow Flag: This flag is set if an overflow occurs, i.e. if the result of a signed operation is large enough to be accommodated in destination register. Direction Flag: It selects either increment or decrement mode for DI &/or SI register during string instructions.
Description : Describe the functions of General purpose registers of 8086 microprocessor.
Last Answer : (i) General Purpose Registers of 8086 1. AX (Accumulator) - Used to store the result for arithmetic / logical operations All I/O data transfer using IN & OUT instructions use A ... Index - acts as the destination for string movement instructions Used to hold offset address of Extra segment.
Description : The 16 bit flag of 8086 microprocessor is responsible to indicate ___________ A. the condition of result of ALU operation B. the condition of memory C. the result of addition D. the result of subtraction
Last Answer : The 16 bit flag of 8086 microprocessor is responsible to indicate the condition of result of ALU operation
Description : In 8086 microprocessor , the address bus is ________ bit wide A. 12 bit B. 10 bit C. 16 bit D. 20 bit
Last Answer : In 8086 microprocessor, the address bus is 20 bit
Description : The intel 8086 microprocessor is a _______ processor A. 8 bit B. 16 bit C. 32 bit D. 4 bit
Last Answer : The intel 8086 microprocessor is a 16 bit processor
Description : In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set
Last Answer : (A) set, reset
Description : In latest generation computers, the instructions are executed a. Parallel only b. Sequentially only c. Both sequentially and parallel d. All of above
Last Answer : c. Both sequentially and parallel
Description : What is the output of the following code AL=88 BCD, CL=49 BCD ADD AL, CL DAA a) D7, CF=1 b) 37, CF=1 c) 73, CF=1 d) 7D, CF=1
Last Answer : a) D7, CF=1
Description : List the four instructions which control the interrupt structure of the 8085 microprocessor.
Last Answer : • DI ( Disable Interrupts ) • EI ( Enable Interrupts ) • RIM ( Read Interrupt Masks ) • SIM ( Set Interrupt Masks )
Description : A microprocessor retries instructions from : a. Control memory b. Cache memory c. Main memory d. Virtual memory
Last Answer : c. Main memory
Description : Which of the following instructions is not available in 8085 microprocessor? (A) LDA 3850 (B) XTHL (C) push PSW (D) LDAXH
Last Answer : Which of the following instructions is not available in 8085 microprocessor? (A) LDA 3850 (B) XTHL (C) push PSW (D) LDAXH
Description : In an 8085 microprocessor, the contents of the Accumulator, after the following instructions are executed will become XRA A MVI B, F0 H SUB B (A) 01 H (B) 0F H (C) F0 H (D) 10 H
Last Answer : In an 8085 microprocessor, the contents of the Accumulator, after the following instructions are executed will become XRA A MVI B, F0 H SUB B (A) 01 H (B) 0F H (C) F0 H (D) 10 H
Description : Which processor provided 1 MB memory: a. 16-bit 8086 and 8088 b. 32-bit 8086 and 8088 c. 64-bit 8086 and 8088 d. 8-bit 8086 and 8088
Last Answer : a. 16-bit 8086 and 8088
Description : Intel used HMOS technology to recreate_____: a. 8084 A b. 8086 A c. 8085 A d. 8088 A
Last Answer : c. 8085 A
Description : .How many transistors does the 8086 have?a) 10,000b ) 29,000 c) 110,000d) 129,000
Last Answer : ) 29,000
Description : 8087 connection to 8086, to enable the _________ bank of memory _______pins are to be connected. a) Lower, BHE b) Upper, BHE c) Lower, INT d) Upper, INT.
Last Answer : a) Lower, BHE
Description : What is the output of the following code AL=00110101 BL= 39H M. Krishna Kumar/IISc. Bangalore M2/V1/June 04/1 Microprocessors and Microcontrollers/Assembly language of 8086 Multiple Choice Questions SUB AL, BL AAS ... , CF=1 b) BL=00000100, CF=0 c) AL=11111100 CF=1 d) BL= 00000100, CF=1
Last Answer : b) BL=00000100, CF=0
Description : In 8086 the overflow flag is set when a) The sum is more than 16 bits b) Signed numbers go out of their range after an arithmetic operation c) Carry and sign flags are set
Last Answer : b) Signed numbers go out of their range after an arithmetic operation
Description : In 8086, Example for Non maskable interrupts are a) Trapb) RST6.5 c) INTR
Last Answer : a) Trap
Description : Define memory segmentation. How memory segmentation is achieved in 8086? State advantages of memory segmentation.
Last Answer : Memory Segmentation: The memory in an 8086 microprocessor is organized as a segmented memory. The physical memory is divided into 4 segments namely, - Data segment, Code Segment, Stack Segment and Extra ... 16 bit size. 6) Programs and data can be stored separately from each other in segmentation.
Description : What is the output of the following code AL= 49 BCD, BH= 72 BCD SUB AL, BH DAS a) AL=D7, CF=1. b) AL=7D, CF=1. c) AL=77, CF=1 d) none of them.
Last Answer : d) none of them.
Description : What is the clock frequency of 8086 microprocessor?
Last Answer : MAximum clock frequency of 8086 is 5MHZ.
Description : Which of the following is not an XT microprocessor? A) 8006 B) 8086 C) 8088 D) None of above
Last Answer : Answer : D
Description : To read or write a complete word from / to the memory in 8086 microprocessor and if it is located at an even address, the number of Read or Write cycles required is
Last Answer : To read or write a complete word from / to the memory in 8086 microprocessor and if it is located at an even address, the number of Read or Write cycles required is one
Description : Which microprocessor accepts the program written for 8086 without any changes? (a) 8085 (b) 8088 (c) 80186 (d) 80188
Last Answer : Which microprocessor accepts the program written for 8086 without any changes? (a) 8085 (b) 8088 (c) 80186 (d) 80188
Description : When the RET instruction at the end of subroutine is executed, a. the information where the stack is iniatialized is transferred to the stack pointer b. the memory address of the RET instruction is ... two data bytes stored in the top two locations of the stack are transferred to the stack pointer
Last Answer : c. two data bytes stored in the top two locations of the stack are transferred to the program counter
Description : In which register instruction is decoded prepared and ultimately executed: a. Instruction register b. Current register c. Both a and b d. None of these
Last Answer : a. Instruction register
Description : _______ Stores the instruction currently being executed: a. Instruction register b. Current register c. Both a and b d. None of these
Description : How does the microprocessor differentiate between data and instruction
Last Answer : When the first m/c code of an instruction is fetched and decoded in the instruction register, the microprocessor recognizes the number of bytes required to fetch the entire ... will be considered as data & the byte after the data will be treated as the next instruction.
Description : How many operations are there in the instruction set of 8085 microprocessor?
Last Answer : There are 74 operations in the 8085 microprocessor.
Description : List the 16 – bit registers of 8085 microprocessor.
Last Answer : Stack pointer (SP) and Program counter (PC).
Description : List few applications of microprocessor-based system.
Last Answer : It is used: i. For measurements, display and control of current, voltage, temperature, pressure, etc. ii. For traffic control and industrial tool control. iii. For speed control of machines.
Description : What is Microprocessor? Give the power supply & clock frequency of 8085
Last Answer : A microprocessor is a multipurpose, programmable logic device that reads binary instructions from a storage device called memory accepts binary data as input and processes data according ... provides result as output. The power supply of 8085 is +5V and clock frequency in 3MHz.
Description : What type of architecture is used in 8085 microprocessor?
Last Answer : Ans- INTEL 8085 is a 8-bit microprocessor. It's based on Von-Neumann architecture in which the data and instructions are in the same memory space without any distinction between them. Data line: 8-bits--Can ... of data at a time. Address line: 16-bits--Can address upto 2^16(64KB) of address space.
Description : What is function of ALE in 8085 microprocessor?
Last Answer : Ans-AlE stands for the address latch enableit 's working is that it differentiate the address and data bus in microprocessor.when it is high it select address bus .when it is low it select data bus.
Description : Which are the architectural paradigms in microprocessor: a. RISC b. CISC c. PISC d. A and B
Last Answer : d. A and B