Errors in computer programs are called: a) Hubs b) Bugs c) Syntex Error d) None of these

Errors in computer programs are called:
a) Hubs
b) Bugs
c) Syntex Error
d) None of these
by

1 Answer

Answer :

b) Bugs
by

Related questions

Errors in a software program are referred to as: a) Viruses b) Bugs c) Computer Fault d) None of These

Description : Errors in a software program are referred to as: a) Viruses b) Bugs c) Computer Fault d) None of These

Last Answer : b) Bugs

CLICK is coded as ZIFZH, Then what is the code for Syntex a) PVKQBU b) PVKQUB c) VPKQBU d) PVQKBU

Description : CLICK is coded as ZIFZH, Then what is the code for Syntex a) PVKQBU b) PVKQUB c) VPKQBU d) PVQKBU

Last Answer : a) PVKQBU

Which statement is valid about computer program? A) High level languages must be converted into machine language to execute B) High level language programs are more efficient and faster to execute C) It is more difficult to identify errors in high level language program than in low level programs D) All of above

Description : Which statement is valid about computer program? A) High level languages must be converted into machine language to execute B) High level language programs are more efficient and faster to execute C) It ... to identify errors in high level language program than in low level programs D) All of above

Last Answer : Answer : A

Errors in computer programmes are called: (A) Follies (B) Mistakes (C) Bugs (D) Spam

Description : Errors in computer programmes are called: (A) Follies (B) Mistakes (C) Bugs (D) Spam

Last Answer : (C) Bugs

For expanding access to banking services, the RBI has advised banks to open branches with minimum infrastructure support of 8 to 10BC units at a reasonable 3-4km. Such branches are known as _______ A. White Label ATMs B. Ultra Small Branches C. Banking Kiosks D. CBS Terminals E. ICT Hubs

Description : For expanding access to banking services, the RBI has advised banks to open branches with minimum infrastructure support of 8 to 10BC units at a reasonable 3-4km. Such branches are known as _______ A. White Label ATMs B. Ultra Small Branches C. Banking Kiosks D. CBS Terminals E. ICT Hubs

Last Answer : B. Ultra Small Branches Explanation: Ultra Small Branches may be set up between the base branch and BC locations so as to provide support to about 8-10 BC Units at a reasonable distance ... for operating large customer transaction and would have to be managed full time by bank officers/ employees.

The errors that can be pointed out by the compiler are 1) Syntax error 2) Symantic error 3) Logical error 4) Internal error

Description : The errors that can be pointed out by the compiler are 1) Syntax error 2) Symantic error 3) Logical error 4) Internal error

Last Answer : 1) Syntax error

Is there a limit to how many USB hubs I can put on a computer?

Description : Is there a limit to how many USB hubs I can put on a computer?

Last Answer : The Universal Serial Bus gives you a single, standardized, easy-to-use way to connect up to 127 devices to a computer. Unfortunately, the more you connect, the more possibility there is to have ... drive instructions. Some hard drives need to be connected directly to the USB port on the computer.

How hot are the Hubs of Hades?

Description : How hot are the Hubs of Hades?

Last Answer : answer:1,300 °F to 2,200 °F if you mean “Hell”. About a 2 if you mean this guy

How do you get two BT home hubs working on the same connection?

Description : How do you get two BT home hubs working on the same connection?

Last Answer : I know this is not needed to answer your question, but why do you want the two computers to be a wired connection?

How To Choose Between Network Hubs And Switches?

Description : How To Choose Between Network Hubs And Switches?

Last Answer : If you are setting up a local area network (LAN), don’t get confused by the terms network hub and network switch. They refer to completely different devices. A hub allows all computers connected to the ... where, and so can pass data on to the specific computer the sender is trying to reach.Swit

Will Linksys network hub home edition compare to any of the Cisqo Systems hubs available?

Description : Will Linksys network hub home edition compare to any of the Cisqo Systems hubs available?

Last Answer : The gigabit switches on teh Linksys are non-blocking and are optimized for maximizing system availability,compared to others where its limited.

Do Hubs come with hardwire Firewalls like routers"?

Description : Do Hubs come with hardwire Firewalls like routers"?

Last Answer : Most do not, you can buy a standalone hardware firewall if you wish to do so.

Do I need crossover cables for hubs and switches?

Description : Do I need crossover cables for hubs and switches?

Last Answer : An eathernet cross over cable is suggested when using a hub.

Network Hubs and Switches?

Description : Network Hubs and Switches?

Last Answer : Setting up a network in a home or office is quite a task. Determining where your computers will be, how to get an Ethernet cable to those that need them, and making sure they can all talk to ... a single network. Which and how to use them are entirely up to the individual(s) building the network.

Advantages of Network Switches Over Hubs?

Description : Advantages of Network Switches Over Hubs?

Last Answer : Most networks used in home and small office environments use Ethernet as the physical media. In an Ethernet network, devices are connected together using either hubs or switches. This ... throughput applications. Networks that include file servers or extreme gaming systems fall into this category.

For ensuring the availability of new kinds of seeds, seed hubs are created with the help of- a. ICAR and KVKs b. Union ministry of agriculture and farmers welfare and KVKs c. Union ministry of agriculture and farmers and National seed fund d. ICAR and Union ministry of agriculture and farmers e. None of these

Description : For ensuring the availability of new kinds of seeds, seed hubs are created with the help of- a. ICAR and KVKs b. Union ministry of agriculture and farmers welfare and KVKs c. Union ministry of ... farmers and National seed fund d. ICAR and Union ministry of agriculture and farmers e. None of these

Last Answer : d. ICAR and Union ministry of agriculture and farmers

What is the difference between a switch and a hub? A. Switches operate at physical layer while hubs operate at data link layerB. Switches operate at data link layer while hubs operate at transport layer C. Switches operate at data link layer while hubs operate at physical layer D. Switches operate at transport layer while hubs operate at physical layer

Description : What is the difference between a switch and a hub? A. Switches operate at physical layer while hubs operate at data link layer B. Switches operate at data link layer while hubs operate at ... hubs operate at physical layer D. Switches operate at transport layer while hubs operate at physical layer

Last Answer : C. Switches operate at data link layer while hubs operate at physical layer

What is the difference between a switch and a hub? A. Switches operate at physical layer while hubs operate at data link layer B. Switches operate at data link layer while hubs operate at transport layer C. Switches operate at data link layer while hubs operate at physical layer D. Switches operate at transport layer while hubs operate at physical layer

Description : What is the difference between a switch and a hub? A. Switches operate at physical layer while hubs operate at data link layer B. Switches operate at data link layer while hubs operate at ... hubs operate at physical layer D. Switches operate at transport layer while hubs operate at physical layer

Last Answer : C. Switches operate at data link layer while hubs operate at physical layer

Which of the following statements accurately describe the differences between a hub and a switch? Check all that apply. A. A switch remembers which devices are connected on each interface, while a hub does not. B. A hub is a physical layer device, and a switch is a data link layer device. C. A hub causes larger collision domains. D. Hubs are more sophisticated versions of switches. a. A,B b. A,B,C c. A,B,C,D d. A,C,D

Description : Which of the following statements accurately describe the differences between a hub and a switch? Check all that apply. A. A switch remembers which devices are connected on each interface, while a hub does not. B. A hub is a ... versions of switches. a. A,B b. A,B,C c. A,B,C,D d. A,C,D

Last Answer : b. A,B,C

Plate material is permitted for use in the construction of which of the following? a) Flange hubs. b) Blind Flanges. c) Elbows. d) All of the above.

Description : Plate material is permitted for use in the construction of which of the following? a) Flange hubs. b) Blind Flanges. c) Elbows. d) All of the above.

Last Answer : b) Blind Flanges.

Which of the following examines information passing through switches, hubs, or routers? a. Key logger b. Packet sniffer c. Log analysis tools d. Screen captures

Description : Which of the following examines information passing through switches, hubs, or routers? a. Key logger b. Packet sniffer c. Log analysis tools d. Screen captures

Last Answer : b. Packet sniffer

(i) An error that affects debit as well as credit side, it is called as _______ errors.

Description : (i) An error that affects debit as well as credit side, it is called as _______ errors.

Last Answer : Complete the following sentences : (i) An error that affects debit as well as credit side, ... of omission, the debit and credit are ___________

Process of removing errors called a) Error Free b) Debug c) Syntax Error d) Exception

Description : Process of removing errors called a) Error Free b) Debug c) Syntax Error d) Exception

Last Answer : b) Debug

Find the error(s) in the following code and underline those errors. <HTML> -Technology

Description : Find the error(s) in the following code and underline those errors. -Technology

Last Answer : should be placed before The correct code is Example

what isThere is one error in coordination and one error in subordination in the outline below. Identify the errors and then briefly explain why coordination and subordination are important to keep in mind when creating an outline.?

Description : what isThere is one error in coordination and one error in subordination in the outline below. Identify the errors and then briefly explain why coordination and subordination are important to keep in mind when creating an outline.?

Last Answer : huh

What is systematic error? Classify errors into different categories.

Description : What is systematic error? Classify errors into different categories.

Last Answer : What is systematic error? Classify errors into different categories.

which type of errors are detected by the assembler: a. syntax error b. logical error 9 run time error a none of these

Description : which type of errors are detected by the assembler: a. syntax error b. logical error 9 run time error a none of these

Last Answer : a. syntax error

What type of errors are not detected by assemblers: a. Syntax error b. Runtime error c. Logical error

Description : What type of errors are not detected by assemblers: a. Syntax error b. Runtime error c. Logical error

Last Answer : c. Logical error

Of the following statements, which best distinguishes ordinary negligence from gross negligence? a. The more material the undetected error the greater the likelihood of ordinary negligence. b. Gross negligence is most probable when the auditor fails to detect errors that occurred under conditions of strong internal control. c. Failure to detect material errors, whether internal control is strong or weak, suggests gross negligence. d. Failure to exercise reasonable care denotes ordinary negligence, whereas failure to exercise minimal care indicates gross negligence

Description : Of the following statements, which best distinguishes ordinary negligence from gross negligence? a. The more material the undetected error the greater the likelihood of ordinary negligence. ... care denotes ordinary negligence, whereas failure to exercise minimal care indicates gross negligence

Last Answer : Failure to exercise reasonable care denotes ordinary negligence, whereas failure to exercise minimal care indicates gross negligence

Why should the auditor plan more work on individual accounts as lower acceptable levels of both audit risk and materiality are established? a. To find smaller errors b. To find larger errors c. To increase the tolerable error in the accounts d. To decrease the risk of overreliance

Description : Why should the auditor plan more work on individual accounts as lower acceptable levels of both audit risk and materiality are established? a. To find smaller errors b. To find larger errors c. To increase the tolerable error in the accounts d. To decrease the risk of overreliance

Last Answer : To find smaller errors

Which of the following statements is correct relating to the auditor’s consideration of fraud? a. The auditor’s interest in fraud consideration relates to fraudulent acts that cause a material misstatement of financial statements. b. A primary factor that distinguishes fraud from error is that fraud is always intentional, while errors are generally, but not always, intentional. c. While an auditor should be aware of the possibility of fraud, management, and not the auditor, is responsible for detecting fraud. d. Fraud always involves a pressure or incentive to commit fraud, and a misappropriation of assets

Description : Which of the following statements is correct relating to the auditor's consideration of fraud? a. The auditor's interest in fraud consideration relates to fraudulent acts that cause a material ... d. Fraud always involves a pressure or incentive to commit fraud, and a misappropriation of assets

Last Answer : The auditor’s interest in fraud consideration relates to fraudulent acts that cause a material misstatement of financial statements.

Which of the following statements reflects an auditor's responsibility for detecting fraud and error? a. An auditor is responsible for detecting employee errors and simple fraud, but not for discovering fraud involving employee collusion or management overrideAn auditor should design the auditto provide reasonable assurance ofdetecting errors and fraud that arematerial to the financial statements.c. An auditor should plan the audit to detecterrors and fraud that are caused bydepartures from the applicable FRF.d. An auditor is not responsible fordetecting errors and fraud unless theapplication of PSAs and PAPs would resultin such detection

Description : Which of the following statements reflects an auditor's responsibility for detecting fraud and error? a. An auditor is responsible for detecting employee errors and simple fraud, but not for ... detecting errors and fraud unless the application of PSAs and PAPs would result in such detection

Last Answer : An auditor should design the audit to provide reasonable assurance of detecting errors and fraud that are material to the financial statements.

Error rate is A. an error-detectingcode based ona summation operation performed onthebits to be checked. B. a checkbit appended to anarrayof binary digits to make thesum of all thebinary digits. C. a code in which each expressionconforms to specific rules of construction, so that if certain errors occur in an expression, the resulting expression will not conform to the rulesof constructionand thus thepresence of the errors isdetected. D. the ratioof the number ofdata units in error to the total number of dataunits E. None of the above

Description : Error rate is A. an error-detectingcode based ona summation operation performed onthebits to be checked. B. a checkbit appended to anarrayof binary digits to make thesum of all thebinary digits. C. a ... ratioof the number ofdata units in error to the total number of dataunits E. None of the above

Last Answer : the ratioof the number ofdata units in error to the total number of dataunits

Which of the following refers to theterms "residual error rate"? A. the number of biterrors per twenty four hours of continuous operation onanasynchronous line B. The probability that one or moreerrors will be undetected whenan error detection scheme is used C. the probability thatone or more errors will bedetected when anerror detection mechanism is used D. signal tonoise ratio dividedby the ratio of energy perbit to noise per hertz E. None of the above

Description : Which of the following refers to theterms "residual error rate"? A. the number of biterrors per twenty four hours of continuous operation onanasynchronous line B. The probability that one or moreerrors ... tonoise ratio dividedby the ratio of energy perbit to noise per hertz E. None of the above

Last Answer : The probability that one or moreerrors will be undetected whenan error detection scheme is used

The Internet Control Message Protocol (ICMP) A. allows gateways to send error acontrol messages toother gateways or hosts B. provides communication between the Internet Protocol Software on one machine and the InternetProtocol Software on another C. reports error conditions tothe original source, the source must relate errors to individual applicationprograms and takeaction to correct theproblem D. All of theabove E. None of the above

Description : The Internet Control Message Protocol (ICMP) A. allows gateways to send error acontrol messages toother gateways or hosts B. provides communication between the Internet Protocol Software on one machine ... and takeaction to correct theproblem D. All of theabove E. None of the above

Last Answer : All of theabove

_______ can detect burst error of length less than or equal to degree of the polynomial and detects burst errors that affect odd number of bits. a. Hamming Code b. CRC c. VRC d. None of the above

Description : _______ can detect burst error of length less than or equal to degree of the polynomial and detects burst errors that affect odd number of bits. a. Hamming Code b. CRC c. VRC d. None of the above

Last Answer : b. CRC

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of offset should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Description : Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of ... should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Last Answer : (B) 28.28 m

cause of translational errors occurred in CMM a. Twisting error b. Error in scale division c. Roll error d. Error in straightness

Description : cause of translational errors occurred in CMM a. Twisting error b. Error in scale division c. Roll error d. Error in straightness

Last Answer : Ans:- d. Error in straightness

Working from the whole to the part is followed as the fundamental principle of surveying so as to : 1. Distribute errors 2. Improve ease of working 3. Prevent accumulation of errors 4. Compensate error in a way 5. Refer to common datum, say MSL (a) 1, 2 and 4 (b) 1, 3 and 5 (c) 3 and 4 (d) 2 and 5

Description : Working from the whole to the part is followed as the fundamental principle of surveying so as to : 1. Distribute errors 2. Improve ease of working 3. Prevent accumulation of errors 4. Compensate error in a way 5. Refer to common datum ... (a) 1, 2 and 4 (b) 1, 3 and 5 (c) 3 and 4 (d) 2 and 5

Last Answer : (c) 3 and 4

Define Error Detection and Correction. Mention the types of errors.

Description : Define Error Detection and Correction. Mention the types of errors.

Last Answer : Data can be corrupted during transmission. For reliable communication, errors must be detected and corrected. Single bit error: The only one bit of a given data unit (such as byte character/data unit or packet) is ... error: 2 or more bits in the data unit have changed from 1 to 0 from 0 to 1.

Which of the following are all errors associated with ADF? a. Selective availability, coastal refraction, night effect b. Night effect, quadrantal error, lane slip c. Mountain effect, station interference, static interference d. Selective availability, coastal refraction, quadrantal error

Description : Which of the following are all errors associated with ADF? a. Selective availability, coastal refraction, night effect b. Night effect, quadrantal error, lane slip c. Mountain effect, station interference, static interference d. Selective availability, coastal refraction, quadrantal error

Last Answer : c. Mountain effect, station interference, static interference

Describe the following errors and their compensation: (i) Phase error (ii) Speed error

Description : Describe the following errors and their compensation: (i) Phase error (ii) Speed error

Last Answer : (I) Phase error   1. In the phase error the phase difference angle between ∅ & ∅ is kept by using the shading band/ring  2. If the design and location of Shading band/ring is ... of brake magnet. By changing the position of the brake magnet speed of the rotating disc can be controlled. 

Errors in computer results could be due to 1) encoding of data 2) transmission of data 3) manipulation of data 4) all of the above

Description : Errors in computer results could be due to 1) encoding of data 2) transmission of data 3) manipulation of data 4) all of the above

Last Answer : 4) all of the above

What is correcting errors in a program called? 1) Debugging 2) Compiling 3) Interpreting 4) None of these

Description : What is correcting errors in a program called? 1) Debugging 2) Compiling 3) Interpreting 4) None of these

Last Answer : 1) Debugging

_____is the process of finding errors in software code. 1) Compiling 2) Testing 3) Running 4) Debugging 6 5) None of these

Description : _____is the process of finding errors in software code. 1) Compiling 2) Testing 3) Running 4) Debugging 6 5) None of these

Last Answer : Answer :4

The primary advantage of key-to-tape data entry system is A) A large percentage of editing can be performed at the time of data entry B) Key verification is easily performed C) The tape is reusable D) Keying errors can be detected as they occur.

Description : The primary advantage of key-to-tape data entry system is A) A large percentage of editing can be performed at the time of data entry B) Key verification is easily performed C) The tape is reusable D) Keying errors can be detected as they occur.

Last Answer : Answer : C

What are logical errors and how does it differ from syntax errors?

Description : What are logical errors and how does it differ from syntax errors?

Last Answer : Program that contains logical errors tend to pass the compilation process, but the resulting output may not be the expected one. This happens when a wrong formula was inserted into the code, or ... the other hand, deal with incorrect commands that are misspelled or not recognized by the compiler.

In MS Word, which checks active document for spelling and grammatical errors is: a) Spell Corrector b) Spell Checker c) Spell Improver d) None of These

Description : In MS Word, which checks active document for spelling and grammatical errors is: a) Spell Corrector b) Spell Checker c) Spell Improver d) None of These

Last Answer : b) Spell Checker