Description : Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide
Last Answer : Option B
Description : Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first ... of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : 10. Catalytic converters are fitted into automobiles to reduce emission of harmful gases. Catalytic converters change un burnt hydrocarbons into (a) carbon dioxide and water (b) carbon mono oxide (c) methane (d) carbon dioxide and methane.
Last Answer : (a) carbon dioxide and water
Description : Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel
Last Answer : (A) Silica-alumina
Description : Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide
Last Answer : (A) Phosphoric acid on kieselguhr
Description : The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina
Last Answer : (A) Nickel
Description : Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride
Last Answer : (A) Platinum on alumina
Description : Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron
Last Answer : (B) Vanadium
Description : Catalyst used in the oxidation of ammonia is (A) Platinum-beryllium (B) Platinum-rhodium (C) Cobalt-molybdenum (D) Platinum-molybdenum
Last Answer : (B) Platinum-rhodium
Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98
Last Answer : (D) 98
Description : A carbonaceous fuel (containing no H2 or hydrocarbons) is burnt and the resulting flue gas contains 21% CO2 . It means that (A) 21% excess air has been used for combustion (B) 21% excess oxygen has ... (C) Complete combustion of fuel has taken place (D) No excess air has been used for combustion
Last Answer : (C) Complete combustion of fuel has taken place
Description : The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel (C) Platinum (D) Nickel
Last Answer : (A) Alumina
Description : In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)
Description : Constituents of stellite are (A) Zinc, copper and nickel (B) Cobalt, chromium and tungsten (C) Zinc, aluminium and nickel (D) Nickel, cobalt and vanadium
Last Answer : (B) Cobalt, chromium and tungsten
Description : Constituents of stellite are (A) Zinc, copper & nickel (B) Cobalt, chromium & tungsten (C) Zinc, aluminium & nickel (D) Nickel, cobalt & vanadium
Last Answer : (B) Cobalt, chromium & tungsten
Description : Pick out the wrong statement. (A) Catalytic converter is fitted in automobiles to reduce carbon monoxide concentration in exhaust emissions (B) Inhalation of pollutant carbon monoxide results ... D) Decomposition of plants containing chlorophyll is a natural source of carbon monoxide in atmosphere
Last Answer : (C) Sulphur dioxide is the main pollutant emitted from the exhaust of petrol driven automobiles
Description : Catalyst used in the manufacture of NH3 by Haber's process is finely divided (A) Nickel (B) Iron (C) Vanadium pentoxide (D) Alumina
Last Answer : (B) Iron
Description : Catalyst used in Haber's process for ammonia production is (A) Reduced iron oxide (B) Nickel (C) Vanadium pentoxide (D) Silica gel
Last Answer : (A) Reduced iron oxide
Description : Which oxide of the following metals is often used as a pigment in white paint? w) titanium x) cobalt y) nickel z) vanadium
Last Answer : ANSWER: W -- TITANIUM
Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base
Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene
Description : __________ catalyst is used in the production of urea from CO2 and NH3 . (A) Vanadium pentoxide (B) No (C) Alumina (D) Nicke
Last Answer : (B) No
Description : Catalyst used in the production of high density polythene by low pressure Ziegler process is (A) Aluminium triethyl activated with TiCl4 (B) Platinum (C) Molybdenum (D) Nickel
Last Answer : (A) Aluminium triethyl activated with TiCl4
Description : Catalyst used in steam reforming of naphtha is (A) Nickel (B) Platinum (C) Silica gel (D) Rhodium
Description : Catalyst used in the hydrogenation of oil is (A) Nickel (B) Platinum (C) Iron (D) Alumina
Description : For the hydrogenation of oils, __________ (i) __________ is commonly used as catalyst and __________ (ii) __________ is a catalyst poison. (A) (i) platinum (ii) sulphur (B) (i) palladium (ii) oxygen (C) (i) nickel (ii) sulphur (D) (i) nickel (ii) oxygen
Last Answer : (C) (i) nickel (ii) sulphur
Description : Catalyst used during the manufacture of 'Vanaspati Ghee' is (A) Zinc (B) Nickel (C) Platinum (D) Copper
Last Answer : (B) Nickel
Description : Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium
Last Answer : (C) Nickel oxide on alumina support
Description : Conversion achieved in HNO3 synthesis with the use of platinum catalyst is about 95-97%. The rate of formation of nitrogen dioxide from the oxidation of nitric acid is favoured by (A) Decreasing the pressure (B) Decreasing the temperature (C) Increasing the temperature (D) None of these
Last Answer : (C) Increasing the temperature
Description : Sulphuric acid is used as a catalyst in the (A) Hydrogenation of oils (B) Gas phase oxidation of SO2 in chamber process (C) Alkylation of hydrocarbons (D) None of these
Last Answer : (C) Alkylation of hydrocarbons
Description : Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure ... for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed
Last Answer : (B) High cost of the high pressure vessel used for the reactor
Description : __________ gas is normally employed in B.E.T. method of finding out the surface area of catalyst. (A) N2 (B) H2 (C) CO2 (D) He
Last Answer : (A) N2
Description : Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) ... resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium
Last Answer : (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives
Description : A sample of natural gas containing 80% methane (CH4 ) and rest nitrogen (N2 ) is burnt with 20% excess air. With 80% of the combustibles producing CO2 and the remainder going to CO, the Orsat analysis in volume percent is (A) CO2 : 6 ... 96, N2 :72.06 (D) CO2 : 7.60, CO : 1.90, O2 : 4.75, N2 : 85.74
Last Answer : (B) CO2 : 7.42, CO : 1.86, O2 : 4.64, N2 :86.02
Description : 6 gm of carbon is burnt with an amount of air containing 18 gm oxygen. The product contains 16.5 gms CO2 and 2.8 gms CO besides other constituents. What is the degree of conversion on the basis of disappearance of limiting reactant? (A) 100% (B) 95% (C) 75% (D) 20%
Last Answer : (B) 95%
Description : . Shift conversion reaction (A) Converts N2 and H2 into NH3 (B) Converts CO to CO2 with steam (C) Is non-catalytic (D) Is highly exothermic
Last Answer : (B) Converts CO to CO2 with steam
Description : Main pollutant present in automobile exhaust is (A) CO (B) CO2 (C) NO (D) Hydrocarbons
Last Answer : (A) CO
Description : Which one of the following cannot be controlled by a 3 way catalytic converter? (a) HC emission (b) CO emission (c) NOx emission (d) SPM emission
Last Answer : Ans :d
Description : . Invar contains the highest percentage of (A) Vanadium (B) Iron (C) Tungsten (D) Cobalt
Description : __________ can replace tungsten in high speed steel, (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum
Last Answer : (D) Molybdenum
Description : __________ can replace tungsten in high speed steel. (A) Chromium (B) Vanadium (C) Cobalt (D) Molybdenum
Last Answer : (C) Cobalt
Description : Which one of the following is a most harmful pollutant by automobiles? (a) SO2 (b) CO (c) N2O (d) CO2
Last Answer : (b) CO
Description : Which of the following is universally employed as the low expansion metal in the bimetallic thermometer, which is an iron-nickel alloy containing 36% nickel and has very low co-efficient of expansion (1/20th of ordinary metals) ? (A) Invar (B) Constantan (C) Chromel (D) Alumel
Last Answer : (A) Invar
Description : Catalyst used in desulphurisation of naphtha is (A) Co-Mo (B) Pt-Rh (C) Silica gel (D) Nickel
Last Answer : (A) Co-Mo
Description : L.D. converter gas (produced in steel plant) comprises mainly of (A) CO (upto 65%) & CO2 (B) CO2 & H2 (C) CO & O2 (D) CO2 & O2
Last Answer : (A) CO (upto 65%) & CO2
Description : Fauser Montecatini converter is used for (A) Ammonia synthesis (e.g. at FCI Sindri, India) (B) Methanation of CO and CO2 (C) Shift conversion (i.e. CO to CO2 ) (D) None of these
Last Answer : (A) Ammonia synthesis (e.g. at FCI Sindri, India)
Description : A liquid/gaseous fuel containing hydrocarbons and high amount of sulphur is burnt with 40% excess air. The flue gas still contains large amount of carbon monoxide. This may be due to the (A) Presence of large ... fuel (C) High sulphur content in the fuel (D) Lack of thorough mixing of fuel with air
Last Answer : (D) Lack of thorough mixing of fuel with air
Description : Conversion of CO to CO2 by steam in presence of a catalyst is called (A) Steam reforming (B) Shift conversion (C) Steam gasification (D) None of these
Last Answer : (B) Shift conversion
Description : __________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel
Last Answer : (B) Niobium
Description : Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten
Last Answer : (B) Nickel and chromium