Description : Catalyst used in the manufacture of NH3 by Haber's process is finely divided (A) Nickel (B) Iron (C) Vanadium pentoxide (D) Alumina
Last Answer : (B) Iron
Description : Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel
Last Answer : (A) Silica-alumina
Description : The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina
Last Answer : (A) Nickel
Description : Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide
Last Answer : Option B
Description : Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide
Last Answer : (A) Phosphoric acid on kieselguhr
Description : The catalyst used in the production of elemental sulphur from H2S (by oxidation-reduction) is (A) Alumina (B) Silica gel (C) Platinum (D) Nickel
Last Answer : (A) Alumina
Description : __________ catalyst is used in the production of urea from CO2 and NH3 . (A) Vanadium pentoxide (B) No (C) Alumina (D) Nicke
Last Answer : (B) No
Description : Catalyst used in alkylation process is (A) Sulphuric acid (B) Nickel (C) Silica gel (D) Alumina
Last Answer : (A) Sulphuric acid
Description : Catalyst used in desulphurisation of naphtha is (A) Co-Mo (B) Pt-Rh (C) Silica gel (D) Nickel
Last Answer : (A) Co-Mo
Description : Catalyst used in steam reforming of naphtha is (A) Nickel (B) Platinum (C) Silica gel (D) Rhodium
Description : Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron
Last Answer : (B) Vanadium
Description : Which of the following is an adsorbent for removal of nitrogen oxides from gas/air? (A) Active carbon (B) Silica gel (C) Bog iron (iron oxide) (D) Pulverised limestone
Last Answer : (B) Silica gel
Description : __________ process is used for the commercial production of nitric acid by the catalytic oxidation of ammonia. (A) Solvay (B) Ostwald's (C) Haber's (D) None of these
Last Answer : (B) Ostwald's
Description : . Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum
Last Answer : (D) Platinum
Description : Which oxide of the following metals is often used as a pigment in white paint? w) titanium x) cobalt y) nickel z) vanadium
Last Answer : ANSWER: W -- TITANIUM
Description : Catalyst used in Fischer-Tropsch process is (A) Nickel (B) Zinc oxide (C) Alumina (D) Thorium oxide
Description : Which of the following set of conditions is favourable for the maximum yield of ammonia by Haber's process? (A) High pressure, low reactants concentration, high temperature (B) High ... , high reactants concentration, low temperature (D) Low pressure, high reactants concentration, low temperature
Last Answer : (C) High pressure, high reactants concentration, low temperature
Description : Vapor phase reaction of ammonia & nitric acid to produce ammonium nitrate is termed as the __________ process. (A) Haber's (B) Stengel (C) Le-chatelier's (D) Du-pont's
Last Answer : (B) Stengel
Description : Catalytic ammonia synthesis reaction as in Haber's process is (A) Endothermic (B) Exothermic (C) Irreversible (D) None of these
Last Answer : (B) Exothermic
Description : __________ process is used for the manufacture of sodium carbonate by ammonia soda process. (A) Ostwald's (B) Bosch (C) Solvay (D) Haber's
Last Answer : (C) Solvay
Description : Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium
Last Answer : Option A
Description : Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation
Last Answer : (A) Shift conversion
Description : How is ammonia prepared? Write chemical reaction involved in the Haber’s process.
Last Answer : i) Ammonia is prepared by the combination of hydrogen and nitrogen in the ratio of 3:1. ii) The used catalyst is iron oxide. The promotors are potassium and aluminium oxides. iii) The required conditions are high pressure and moderate temperature. N2 + 3H2 → 2NH3
Description : Why it is necessary to remove CO when ammonia is obtained by Haber’s process?
Last Answer : Ans.: Because CO acts as poison for the catalyst in the manufacture of NH3 by Haber’s process.
Description : Catalyst used in steam reforming of naphtha is (A) Bauxite (B) Cobalt (C) Nickel oxide on alumina support (D) Chromium
Last Answer : (C) Nickel oxide on alumina support
Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98
Last Answer : (D) 98
Description : Which adsorbent is used for removing sulphur compounds (S Q, H2S, RSH etc.) removal from coke oven gas in by-products recovery plant? (A) Silica gel (B) Diatomaceous earth (C) Basalt (D) Bog iron (i.e., moist ferric hydroxide)
Last Answer : (D) Bog iron (i.e., moist ferric hydroxide)
Description : Coke oven gas is stripped of its H2S and mercaptans content by (A) Absorption in wash oil (B) Adsorption on bog iron bed (C) Bubbling it through dilute sulphuric acid (D) Adsorption on silica gel
Last Answer : (B) Adsorption on bog iron bed
Description : H2S present in gaseous stream can be removed by adsorption on (A) Silica gel (B) Active carbon (C) Bog iron (D) Limestone powder
Last Answer : (C) Bog iron
Description : Which of the following is an adsorbent used for the removal of SO2 from gas/air? (A) Bog iron (B) Limestone powder or alkalised alumina (C) Silica gel (D) Active carbon
Last Answer : (B) Limestone powder or alkalised alumina
Description : Catalyst used in the production of high density polythene by low pressure Ziegler process is (A) Aluminium triethyl activated with TiCl4 (B) Platinum (C) Molybdenum (D) Nickel
Last Answer : (A) Aluminium triethyl activated with TiCl4
Description : The 'laughing gas' is (A) Nitrous oxide (B) Nitric oxide (C) Nitrogen trioxide (D) Nitrogen pentoxide
Last Answer : (A) Nitrous oxide
Description : In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Which of the following is not a raw material used for the manufacture of ordinary glass? (A) Iron oxide (B) Soda ash (C) Limestone (D) Silica
Last Answer : (A) Iron oxide
Description : Alumina, silica, lime and iron oxide are the basic raw material for the manufacture of Portland cement. The component of Portland cement which first hardens is (A) 5CaO. 3 Al2O3 (B) 3CaO. Al2O3 (C) 3CaO. SiO2 (D) 2CaO. SiO2
Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base
Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene
Description : Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride
Last Answer : (A) Platinum on alumina
Description : Catalyst used in the hydrogenation of oil is (A) Nickel (B) Platinum (C) Iron (D) Alumina
Description : __________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel
Last Answer : (B) Niobium
Description : Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten
Last Answer : (B) Nickel and chromium
Description : Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten
Last Answer : (D) Tungsten
Description : Constituents of stellite are (A) Zinc, copper and nickel (B) Cobalt, chromium and tungsten (C) Zinc, aluminium and nickel (D) Nickel, cobalt and vanadium
Last Answer : (B) Cobalt, chromium and tungsten
Description : Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium
Last Answer : (A) Chromium and nickel
Description : Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium
Last Answer : (D) Vanadium
Description : Constituents of stellite are (A) Zinc, copper & nickel (B) Cobalt, chromium & tungsten (C) Zinc, aluminium & nickel (D) Nickel, cobalt & vanadium
Last Answer : (B) Cobalt, chromium & tungsten
Description : All of the following alloying elements of steel increases hardness but sacrifice ductility, except (A) Nickel (B) Vanadium (C) Molybdenum (D) Chromium
Description : Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum (B) Chromium (C) Vanadium (D) Silicon
Last Answer : Option D
Description : Iron is not used alone as a catalyst in ammonia synthesis, because (A) Its activity declines rapidly, if heated to above 520°C (B) It decomposes ammonia (C) It gets oxidised above 500°C (D) None of these
Last Answer : (A) Its activity declines rapidly, if heated to above 520°C
Description : Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to ... Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction
Last Answer : (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot