Glycerine is not used in the (A) Manufacture of explosive (B) Conditioning and humidification of tobacco (C) Manufacture of pharmaceuticals (D) None of these

Glycerine is not used in the
(A) Manufacture of explosive
(B) Conditioning and humidification of tobacco
(C) Manufacture of pharmaceuticals
(D) None of these
by

1 Answer

Answer :

(D) None of these
by

Related questions

Trinitro-toluene (TNT) is (A) Used in glycerine manufacture (B) An explosive (C) Used in dye manufacture (D) None of these

Description : Trinitro-toluene (TNT) is (A) Used in glycerine manufacture (B) An explosive (C) Used in dye manufacture (D) None of these

Last Answer : (B) An explosive

Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid

Description : Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid

Last Answer : (A) Sulphuric acid

Gun powder, which is an explosive comprises of charcoal, sulphur and (A) Glycerine (B) Salt petre (C) Nitro glycerine (D) Dynamite

Description : Gun powder, which is an explosive comprises of charcoal, sulphur and (A) Glycerine (B) Salt petre (C) Nitro glycerine (D) Dynamite

Last Answer : (B) Salt petre

Which of the following is an explosive? (A) Nitro-glycerine (B) Trinitrotoluene (TNT) (C) Cellulose nitrate (D) All (A), (B), and (C)

Description : Which of the following is an explosive? (A) Nitro-glycerine (B) Trinitrotoluene (TNT) (C) Cellulose nitrate (D) All (A), (B), and (C)

Last Answer : (D) All (A), (B), and (C)

Heating and humidification is done in A. summer air conditioning B. winter air conditioning C. both of the mentioned D. none of the mentioned

Description : Heating and humidification is done in A. summer air conditioning B. winter air conditioning C. both of the mentioned D. none of the mentioned

Last Answer : ANSWER : B

Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore

Description : Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore

Last Answer : (C) Manufacture of carbon electrode

Percentage of glycerine present in the spent lye obtained during soap manufacture is about(A) 0.5(B) 5(C) 20(D) 35

Description : Percentage of glycerine present in the spent lye obtained during soap manufacture is about (A) 0.5 (B) 5 (C) 20 (D) 35

Last Answer : (B) 5

Salt is added in the kettle during soap manufacture to separate (A) Soap from lye (B) Glycerine from lye (C) The metallic soap (D) The unsaponified fat from soap

Description : Salt is added in the kettle during soap manufacture to separate (A) Soap from lye (B) Glycerine from lye (C) The metallic soap (D) The unsaponified fat from soap

Last Answer : (A) Soap from lye

Heat sensitive materials like certain pharmaceuticals and food stuffs can be dried in a/an __________ dryer. (A) Indirect tray (B) Spray (C) Freeze (D) None of these

Description : Heat sensitive materials like certain pharmaceuticals and food stuffs can be dried in a/an __________ dryer. (A) Indirect tray (B) Spray (C) Freeze (D) None of these

Last Answer : (C) Freeze

Who is the largest air-conditioning controls manufacture?

Description : Who is the largest air-conditioning controls manufacture?

Last Answer : We sell to Honeywell, Trane, Carrier, Rheem, Friedrich, TAC. It is a highly fragmented market. Manufacturers of air conditioners also make heat pumps and building climate control systems, among ... residential products and commercial products. Kind of hard to make a blanket statement about this. srm

Which of the following is not categorised as a "mechanical operation”? (A) Agitation (B) Filtration (C) Size enlargement (D) Humidification

Description : Which of the following is not categorised as a "mechanical operation”? (A) Agitation (B) Filtration (C) Size enlargement (D) Humidification

Last Answer : (D) Humidification

For which of the following unit operations, Lewis number is ofsignificance?(A) Adsorption(B) Binary distillation(C) Gas absorption(D) Humidification

Description : For which of the following unit operations, Lewis number is ofsignificance? (A) Adsorption (B) Binary distillation (C) Gas absorption (D) Humidification

Last Answer : (D) Humidification

The equipment frequently used for adiabatic humidification-cooling operation with recirculating liquid is (A) Natural draft cooling tower (B) Induced draft cooling tower (C) Spray chamber (D) None of these

Description : The equipment frequently used for adiabatic humidification-cooling operation with recirculating liquid is (A) Natural draft cooling tower (B) Induced draft cooling tower (C) Spray chamber (D) None of these

Last Answer : (C) Spray chamber

Even though bubble cap towers are very effective for humidification operation, they are not used commonly in industries, because of the (A) High evaporation losses of water (B) High pressure drop of the gas (C) Difficulty in its fabrication (D) None of these

Description : Even though bubble cap towers are very effective for humidification operation, they are not used commonly in industries, because of the (A) High evaporation losses of water (B) High pressure drop of the gas (C) Difficulty in its fabrication (D) None of these

Last Answer : (B) High pressure drop of the gas

Which of the following processes is followed by unsaturated air (with dry bulb temperature 12°C and relative humidity 47%) passing through water spray washer (temperature of water being constant at 40°C? (A) Humidification only (B) Heating only (C) Both heating and humidification (D) Evaporative cooling

Description : Which of the following processes is followed by unsaturated air (with dry bulb temperature 12°C and relative humidity 47%) passing through water spray washer (temperature of water being constant at 40°C ... (B) Heating only (C) Both heating and humidification (D) Evaporative cooling

Last Answer : (C) Both heating and humidification

Humidification involves mass transfer between a pure liquid phase and a fixed gas, which is (A) Insoluble in the liquid (B) Soluble in the liquid (C) Non-ideal in nature (D) At a fixed temperature

Description : Humidification involves mass transfer between a pure liquid phase and a fixed gas, which is (A) Insoluble in the liquid (B) Soluble in the liquid (C) Non-ideal in nature (D) At a fixed temperature

Last Answer : (A) Insoluble in the liquid

Duhring’s rule is important in solving problems on (A) Distillation (B) Crystallisation (C) Evaporation (D) Humidification

Description : Duhring’s rule is important in solving problems on (A) Distillation (B) Crystallisation (C) Evaporation (D) Humidification

Last Answer : (C) Evaporation

A 'unit process' is exemplified by the (A) Distillation (B) Hydrogenation of oils (C) Absorption (D) Humidification

Description : A 'unit process' is exemplified by the (A) Distillation (B) Hydrogenation of oils (C) Absorption (D) Humidification

Last Answer : (B) Hydrogenation of oils

Evaporative cooling process employs a combination of cooling and humidification in which the (A) Sensible heat is added (B) Sensible heat is removed and the latent heat is added (C) Latent heat is removed (D) Sensible heat is added and latent heat is removed

Description : Evaporative cooling process employs a combination of cooling and humidification in which the (A) Sensible heat is added (B) Sensible heat is removed and the latent heat is added (C) Latent heat is removed (D) Sensible heat is added and latent heat is removed

Last Answer : Option B

Why don't pharmaceuticals make more insulin to supply the needs of people from USA?

Description : Why don't pharmaceuticals make more insulin to supply the needs of people from USA?

Last Answer : Low margins. Old product, no patent protection. Lousy return on investment,

Won't normalization of relations with Cuba risk the embarrassing prospect of planeloads of American "medical refugees" besieging the island for health care and pharmaceuticals?

Description : Won't normalization of relations with Cuba risk the embarrassing prospect of planeloads of American "medical refugees" besieging the island for health care and pharmaceuticals?

Last Answer : Probably right with ones extorting the average American, getting laws passed to protect their interest. BUT don't worry they will undoubtedly spread some sort of propaganda saying it's for the little guys best ... , and you want to know the sad part is a LOT of your citizens will believe them.

What are some legit websites to buy pharmaceuticals from Canada?

Description : What are some legit websites to buy pharmaceuticals from Canada?

Last Answer : Given my background in the internet security industry, I’m inclined to say, “there aren’t any.” I do know that there are literally MILLIONS of sites out there called something to the tune of “Canadian Pharmaceuticals,” which are all scams.

Suggestion forwork team theme - mini golf and Pharmaceuticals and ideas?

Description : Suggestion forwork team theme - mini golf and Pharmaceuticals and ideas?

Last Answer : How about different colored golf balls ? They could be “purple pills” or “green pills”.

In which of the following products has Bangladesh emerged as the main competitor of India in the world market? [IAS 1991] (a) Cement (b) Cotton garments (c) Jute (d) Pharmaceuticals

Description : In which of the following products has Bangladesh emerged as the main competitor of India in the world market? [IAS 1991] (a) Cement (b) Cotton garments (c) Jute (d) Pharmaceuticals

Last Answer : Ans: (c)

Match the following: [NDA 2005] City Industry A. Tirupur 1. Railway Engines B. Udaipur 2. Textiles C. Rishikesh 3. Cement D. Varanasi 4. Pharmaceuticals A B C D (a) 2 1 4 3 (b) 4 3 2 1 (c) 2 3 4 1 (d) 4 1 2 3

Description : Match the following: [NDA 2005] City Industry A. Tirupur 1. Railway Engines B. Udaipur 2. Textiles C. Rishikesh 3. Cement D. Varanasi 4. Pharmaceuticals A B C D (a) 2 1 4 3 (b) 4 3 2 1 (c) 2 3 4 1 (d) 4 1 2 3

Last Answer : Ans: (c)

Which of the following surrendered their “in-principle” to launch payments banks? A. Cholamandalam Distribution Services B. Dilip Shanghvi, Sun Pharmaceuticals C. Tech Mahindra D. All of the Above E. None of the Above

Description : Which of the following surrendered their “in-principle” to launch payments banks? A. Cholamandalam Distribution Services B. Dilip Shanghvi, Sun Pharmaceuticals C. Tech Mahindra D. All of the Above E. None of the Above

Last Answer : D. All of the Above Explanation: Three of the 11 entities have surrendered their licenses. They are ―Chalomandalam Distribution Services‖, ―Dilip Shanghvi, Sun Pharmaceuticals‖ and ―Tech Mahindra‖.

The horizontal line in psychrometric chart joining the change of state of air represents A. humidification B. sensible cooling or heating C. sensible cooling or heating with humidification D. sensible cooling or heating with dehumidification

Description : The horizontal line in psychrometric chart joining the change of state of air represents A. humidification B. sensible cooling or heating C. sensible cooling or heating with humidification D. sensible cooling or heating with dehumidification

Last Answer : ANSWER : B

Humidification is the process of addition moisture in air at A. constant wet bulb temperature B. constant dry bulb temperature C. constant latent heat D. none of the above

Description : Humidification is the process of addition moisture in air at A. constant wet bulb temperature B. constant dry bulb temperature C. constant latent heat D. none of the above

Last Answer : ANSWER : B

When, H1 = Total heat of air entering the coil (heating or cooling) H2 = Total heat of air leaving the coil (heating or cooling) H3 = Total heat of air at the end of the process (humidification or dehumidification) then, the sensible heat factor (H2 – H1) / (H3 – H1) represents the process of A. cooling and humidification B. cooling and dehumidification C. heating and humidification D. heating and dehumidification

Description : When, H1 = Total heat of air entering the coil (heating or cooling) H2 = Total heat of air leaving the coil (heating or cooling) H3 = Total heat of air at the end of ... A. cooling and humidification B. cooling and dehumidification C. heating and humidification D. heating and dehumidification

Last Answer : ANSWER : C

The temperature at which the air cannot hold all the water vapour mixed in it and some vapour starts condensing is called as A. humidification temperature B. dehumidification temperature C. dew point temperature D. none of the above

Description : The temperature at which the air cannot hold all the water vapour mixed in it and some vapour starts condensing is called as A. humidification temperature B. dehumidification temperature C. dew point temperature D. none of the above

Last Answer : ANSWER : C

Steam produced in a boiler can be used for a variety of purposes including space heating, drying and _________________ a. Sterilization b. Humidification c. Power generation d. All of above

Description : Steam produced in a boiler can be used for a variety of purposes including space heating, drying and _________________ a. Sterilization b. Humidification c. Power generation d. All of above

Last Answer : d. All of above

Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Description : Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Last Answer : (B) For fibre making

Removal of activated carbon from glycerine is done by (A) Plate and frame filter (B) Rotary vacuum filter (C) Batch basket centrifuge (D) None of these

Description : Removal of activated carbon from glycerine is done by (A) Plate and frame filter (B) Rotary vacuum filter (C) Batch basket centrifuge (D) None of these

Last Answer : (A) Plate and frame filter

Which of the following adsorbent is used to decolourise yellow glycerine? (A) Silica gel (B) Alumina (C) Fuller's earth (D) Activated carbon

Description : Which of the following adsorbent is used to decolourise yellow glycerine? (A) Silica gel (B) Alumina (C) Fuller's earth (D) Activated carbon

Last Answer : (D) Activated carbon

Which of the following processes is not an example of adsorption applied to gaseous separations? (A) Recovery of valuable solvent vapors from dilute mixture with air and other gases (B) Dehumidification of air and gas (C) Removal of objectionable odour and impurities from industrial gases (D) Decolouration of yellow glycerine

Description : Which of the following processes is not an example of adsorption applied to gaseous separations? (A) Recovery of valuable solvent vapors from dilute mixture with air and ... Removal of objectionable odour and impurities from industrial gases (D) Decolouration of yellow glycerine

Last Answer : (D) Decolouration of yellow glycerine

Glycerine can be obtained from (A) Fat (B) Naphthalene (C) Cumene (D) Sucrose

Description : Glycerine can be obtained from (A) Fat (B) Naphthalene (C) Cumene (D) Sucrose

Last Answer : (A) Fat

Synthetic glycerine is produced from (A) Toluene (B) Phenol (C) Propylene (D) Naphthalene

Description : Synthetic glycerine is produced from (A) Toluene (B) Phenol (C) Propylene (D) Naphthalene

Last Answer : (C) Propylene

Aryl benzene sulphonate (ABS) is a (A) Detergent (B) Plasticiser for unsaturated polyester (C) Starting material for the synthesis of glycerine (D) Coating ingredient for photographic film

Description : Aryl benzene sulphonate (ABS) is a (A) Detergent (B) Plasticiser for unsaturated polyester (C) Starting material for the synthesis of glycerine (D) Coating ingredient for photographic film

Last Answer : (A) Detergent

Oil is a/an (A) Mixture of glycerides (B) Mixture of glycerides of fatty acids (C) Solid at normal temperature (D) Ester of alcohols other than glycerine

Description : Oil is a/an (A) Mixture of glycerides (B) Mixture of glycerides of fatty acids (C) Solid at normal temperature (D) Ester of alcohols other than glycerine

Last Answer : (B) Mixture of glycerides of fatty acids

Wax is a (A) Mixture of glycerides (B) Mixture of esters of polyhydric alcohols excepting glycerine (C) Liquid at room temperature (D) Mixture of glycerides of fatty acids

Description : Wax is a (A) Mixture of glycerides (B) Mixture of esters of polyhydric alcohols excepting glycerine (C) Liquid at room temperature (D) Mixture of glycerides of fatty acids

Last Answer : (B) Mixture of esters of polyhydric alcohols excepting glycerine

Transparent soaps (e.g. Pears) are (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency (B) Metallic soaps with frothing agent and free Stearic acid to achieve transparency (C) Metallic soaps with frothing agent from which glycerine has not been recovered (D) None of these

Description : Transparent soaps (e.g. Pears) are (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency (B) ... (C) Metallic soaps with frothing agent from which glycerine has not been recovered (D) None of these

Last Answer : (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency

Glycerine is a by-product of the __________ industry. (A) Soap (B) Detergent (C) Oil hydrogenation (D) Paint

Description : Glycerine is a by-product of the __________ industry. (A) Soap (B) Detergent (C) Oil hydrogenation (D) Paint

Last Answer : (A) Soap

Glycerine is recovered from lye by (A) Evaporation followed by vacuum distillation (B) Liquid extraction technique (C) Extractive distillation technique (D) None of these

Description : Glycerine is recovered from lye by (A) Evaporation followed by vacuum distillation (B) Liquid extraction technique (C) Extractive distillation technique (D) None of these

Last Answer : (A) Evaporation followed by vacuum distillation

Yellow glycerine is made into white, using (A) Activated carbon (B) Diatomaceous earth (C) Bauxite (D) Bentonite

Description : Yellow glycerine is made into white, using (A) Activated carbon (B) Diatomaceous earth (C) Bauxite (D) Bentonite

Last Answer : (A) Activated carbon

Glycerine is used as a coolant in cooling of some engines instead of water, because (A) Its higher boiling point (290°C) increases its heat carrying capacity (B) Comparatively less weight of coolant is required (C) Smaller radiator can be used (D) All a, b & c

Description : Glycerine is used as a coolant in cooling of some engines instead of water, because (A) Its higher boiling point (290°C) increases its heat carrying capacity (B) Comparatively less weight of coolant is required (C) Smaller radiator can be used (D) All a, b & c

Last Answer : (D) All a, b & c

Two identical weights are dropped simultaneously, one on water and the other in glycerine. Which of the following statement is correct? a.The weight will settle slowly in water but quickly in glycerine b.The weights will take same time to settle c.The water level will fall but glycerine level will rise d.The weight will settle quickly in water but slowly in glycerine e.107 dynes

Description : Two identical weights are dropped simultaneously, one on water and the other in glycerine. Which of the following statement is correct? a.The weight will settle slowly in water but quickly in glycerine ... level will rise d.The weight will settle quickly in water but slowly in glycerine e.107 dynes

Last Answer : d. The weight will settle quickly in water but slowly in glycerine

What willl happen if density of ball bearing is less than density of glycerine oil?

Description : What willl happen if density of ball bearing is less than density of glycerine oil?

Last Answer : What is the answer ?

Which of these is produced by a mould? (1) Chloroform (2) Glycerine (3) Penicillin (4) Quinine

Description : Which of these is produced by a mould? (1) Chloroform (2) Glycerine (3) Penicillin (4) Quinine

Last Answer : (3) Penicillin Explanation: Penicillin is one of the first and still one of the most widely used antibiotic agents - derived from the Penicillium mold. Penicillin kills bacteria by interfering with the ability to synthesize cell wall.

Which one of the following is used as preservative for foodstuff? (1) Sodium Benzoate (2) Picric acid (3) Glycerine (4) Sodium Chloride

Description : Which one of the following is used as preservative for foodstuff? (1) Sodium Benzoate (2) Picric acid (3) Glycerine (4) Sodium Chloride

Last Answer : (1) Sodium Benzoate Explanation: Sodium benzoate is a preservative. It is bacteriostatic and fungistatic under acidic conditions. It is most widely used in acidic foods such as salad dressings (vinegar), ... (vinegar), and condiments. It is also used as a preservative in medicines and cosmetics.

White phosphorus is generally kept under – (1) Alcohol (2) Water (3) Glycerine (4) Kerosene oil

Description : White phosphorus is generally kept under – (1) Alcohol (2) Water (3) Glycerine (4) Kerosene oil

Last Answer : (2) Water Explanation: White phosphorous is kept under water because it reacts with oxygen but not water. Besides, it is insoluble in water. It presents a significant fire hazard due to its extreme reactivity with atmospheric oxygen.