Description : Which of the following adsorbent is used to decolourise yellow glycerine? (A) Silica gel (B) Alumina (C) Fuller's earth (D) Activated carbon
Last Answer : (D) Activated carbon
Description : Removal of activated carbon from glycerine is done by (A) Plate and frame filter (B) Rotary vacuum filter (C) Batch basket centrifuge (D) None of these
Last Answer : (A) Plate and frame filter
Description : Catalytic desulphurisation process used for sweetening of straight run gasoline and kerosene uses __________ as catalyst. (A) Bauxite (B) Fuller’s earth (C) Activated clay (D) All (A), (B) & (C)
Last Answer : (D) All (A), (B) & (C)
Description : Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore
Last Answer : (C) Manufacture of carbon electrode
Description : A furnace is made of a refractory brick wall of thickness 0.5 metre and thermal conductivity 0.7 W/m.°K For the same temperature drop and heat loss, this refractory wall can be replaced by a layer of diatomaceous earth of ... and thickness __________ metre. (A) 0.01 (B) 0.1 (C) 0.25 (D) 0.5
Last Answer : (B) 0.1
Description : Diatomaceous earth is a/an (A) Explosive (B) Filter aid (C) Filter medium (D) Catalyst
Last Answer : (B) Filter aid
Description : The most common filter aid is (A) Diatomaceous earth (B) Calcium silicate (C) Sodium carbonate (D) Silica gel
Last Answer : (A) Diatomaceous earth
Description : __________ is the most commonly used 'filter aid'. (A) Diatomaceous earth (B) Fuller's earth (C) Vermiculite (D) Semi-plastic clay
Description : Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre ... the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'
Last Answer : (D) All 'a', 'b' & 'c'
Description : Which one is a filter aid? (A) Canvas fabric (B) Diatomaceous earth (C) Calcined lime (D) None of these
Last Answer : (B) Diatomaceous earth
Description : Which of the following is not used as filter aid? (A) Asbestos (B) Diatomaceous earth (C) Purified wood cellulose (D) Rice husk
Last Answer : (D) Rice husk
Description : Which adsorbent is used for removing sulphur compounds (S Q, H2S, RSH etc.) removal from coke oven gas in by-products recovery plant? (A) Silica gel (B) Diatomaceous earth (C) Basalt (D) Bog iron (i.e., moist ferric hydroxide)
Last Answer : (D) Bog iron (i.e., moist ferric hydroxide)
Description : Wet chlorine gas produced during electrolysis of brine is dehydrated by (A) Spraying 66° Be H2SO4 counter current to the flow of the gas (B) Passing it through a bed of diatomaceous earth (C) Passing it through a bed of silica gel (D) None of these
Last Answer : (A) Spraying 66° Be H2SO4 counter current to the flow of the gas
Description : . Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C
Last Answer : (D) All (A), (B) and (C
Description : Anyone take food grade Diatomaceous Earth internally?
Last Answer : I do not. I don’t feel my innards need to be exfoliated with crystalline silica.
Description : Have you heard of Food Grade Diatomaceous Earth?
Last Answer : answer:Diatoms are tiny fossils that are basically crystalline silica. Inhaling that stuff can give you cancer. It's harder than the enamel in your teeth. It has absolutely zero nutritional value. The best ... out. It would benefit you much more to just have some whole-grain oats in the morning.
Description : Select the wrong statement. (a) The walls of diatoms are easily destructible. (b) ‘Diatomaceous earth’ is formed by the cell walls of diatoms. (c) Diatoms are chief producers in the oceans. (d) Diatoms are microscopic and float passively in water.
Last Answer : (a) The walls of diatoms are easily destructible.
Description : Air filtration typically uses a filter. a. HEPA b. Membrane c. Sand d. Diatomaceous Earth
Last Answer : a. HEPA
Description : Which of the following processes is not an example of adsorption applied to gaseous separations? (A) Recovery of valuable solvent vapors from dilute mixture with air and ... Removal of objectionable odour and impurities from industrial gases (D) Decolouration of yellow glycerine
Last Answer : (D) Decolouration of yellow glycerine
Description : How much does a gallon of bentonite clay weigh?
Last Answer : Depending on its density (which can vary) ti should weigh about5 pounds
Description : Which one of the following is a flocculating agent for a negatively charged drug? (A) Aluminium chloride (B) Bentonite (C) Tragacanth (D) Sodium biphosphate
Last Answer : (A) Aluminium chloride
Description : Bentonite is used in pile driving -- a) to facilitate pile driving b) to enable proper pile concreting c) to stabilize the bore hole walls* d) None of the above
Last Answer : c) to stabilize the bore hole walls*
Description : White phosphorus is generally kept under – (1) Alcohol (2) Water (3) Glycerine (4) Kerosene oil
Last Answer : (2) Water Explanation: White phosphorous is kept under water because it reacts with oxygen but not water. Besides, it is insoluble in water. It presents a significant fire hazard due to its extreme reactivity with atmospheric oxygen.
Description : White phosphorus is generally kept under (1) Alcohol (2) Water (3) Glycerine (4) Kerosene oil
Last Answer : Water
Description : Transparent soaps (e.g. Pears) are (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency (B) ... (C) Metallic soaps with frothing agent from which glycerine has not been recovered (D) None of these
Last Answer : (A) Usually soft soap (made from coconut oil) in which cane sugar & alcohol are added and finally washed with methylated spirit to achieve transparency
Description : Foul odour and bad taste of water is removed by treating with (A) Alum (B) Bleaching powder (C) Activated carbon (D) Copper sulphate
Last Answer : (C) Activated carbon
Description : Which is the best and the most effective method for the removal of organic contaminant present in the polluted water in very small quantity (say < 200 mg/litre)? (A) Lagooning (B) Activated carbon adsorption (C) Biological oxidation pond (D) Chemical coagulation
Last Answer : (B) Activated carbon adsorption
Description : Which of the following is used as a coagulant in treating turbid water? (A) Chlorine (B) Ferric sulphate (C) Calcium sulphate (D) Activated carbon
Last Answer : (B) Ferric sulphate
Description : Pick out the true statement pertaining to water treatment. (A) Slow sand filters can remove colour completely (B) Activated carbon can be used for taste & odour control without subsequent filtration ... of water (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation
Last Answer : (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation
Description : The main use of activated carbon in water treatment is to control (A) Bacterial growth (B) Taste and odour (C) Turbidity (D) None of these
Last Answer : (B) Taste and odour
Description : Glycerine and what other substance are made by heatin animal fats or vegetable oils with sodium hydroxide?
Last Answer : ANSWER: SOAP
Description : Aluminium is extracted from bauxite (a) By reduction with carbon (b) By reduction with Mg (c) By reduction with CO (d) By electrolysis in molten cryolite
Last Answer : Ans:(d)
Description : If the growing plant is decapitated, then (a) its growth stops (b) leaves become yellow and fall down (c) axillary buds are inactivated (d) axillary buds are activated.
Last Answer : (d) axillary buds are activated.
Description : In the Bayer's process, bauxite is digested under pressure using (A) H2SO4 (B) NaOH (C) NH3 (D) HCl
Last Answer : (B) NaOH
Description : Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials
Last Answer : (B) For fibre making
Description : Trinitro-toluene (TNT) is (A) Used in glycerine manufacture (B) An explosive (C) Used in dye manufacture (D) None of these
Last Answer : (B) An explosive
Description : Glycerine can be obtained from (A) Fat (B) Naphthalene (C) Cumene (D) Sucrose
Last Answer : (A) Fat
Description : Synthetic glycerine is produced from (A) Toluene (B) Phenol (C) Propylene (D) Naphthalene
Last Answer : (C) Propylene
Description : Glycerine is not used in the (A) Manufacture of explosive (B) Conditioning and humidification of tobacco (C) Manufacture of pharmaceuticals (D) None of these
Last Answer : (D) None of these
Description : Aryl benzene sulphonate (ABS) is a (A) Detergent (B) Plasticiser for unsaturated polyester (C) Starting material for the synthesis of glycerine (D) Coating ingredient for photographic film
Last Answer : (A) Detergent
Description : Oil is a/an (A) Mixture of glycerides (B) Mixture of glycerides of fatty acids (C) Solid at normal temperature (D) Ester of alcohols other than glycerine
Last Answer : (B) Mixture of glycerides of fatty acids
Description : Wax is a (A) Mixture of glycerides (B) Mixture of esters of polyhydric alcohols excepting glycerine (C) Liquid at room temperature (D) Mixture of glycerides of fatty acids
Last Answer : (B) Mixture of esters of polyhydric alcohols excepting glycerine
Description : Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid
Last Answer : (A) Sulphuric acid
Description : Gun powder, which is an explosive comprises of charcoal, sulphur and (A) Glycerine (B) Salt petre (C) Nitro glycerine (D) Dynamite
Last Answer : (B) Salt petre
Description : Glycerine is a by-product of the __________ industry. (A) Soap (B) Detergent (C) Oil hydrogenation (D) Paint
Last Answer : (A) Soap
Description : Percentage of glycerine present in the spent lye obtained during soap manufacture is about (A) 0.5 (B) 5 (C) 20 (D) 35
Last Answer : (B) 5
Description : Glycerine is recovered from lye by (A) Evaporation followed by vacuum distillation (B) Liquid extraction technique (C) Extractive distillation technique (D) None of these
Last Answer : (A) Evaporation followed by vacuum distillation
Description : Salt is added in the kettle during soap manufacture to separate (A) Soap from lye (B) Glycerine from lye (C) The metallic soap (D) The unsaponified fat from soap
Last Answer : (A) Soap from lye
Description : Which of the following is an explosive? (A) Nitro-glycerine (B) Trinitrotoluene (TNT) (C) Cellulose nitrate (D) All (A), (B), and (C)
Last Answer : (D) All (A), (B), and (C)
Description : Glycerine is used as a coolant in cooling of some engines instead of water, because (A) Its higher boiling point (290°C) increases its heat carrying capacity (B) Comparatively less weight of coolant is required (C) Smaller radiator can be used (D) All a, b & c
Last Answer : (D) All a, b & c