Even though bubble cap towers are very effective for humidification operation, they are not used commonly in industries, because of the (A) High evaporation losses of water (B) High pressure drop of the gas (C) Difficulty in its fabrication (D) None of these

Even though bubble cap towers are very effective for humidification

operation, they are not used commonly in industries, because of the

(A) High evaporation losses of water

(B) High pressure drop of the gas

(C) Difficulty in its fabrication

(D) None of these

by

1 Answer

Answer :

(B) High pressure drop of the gas


by

Related questions

Which of the following equipments is not used for gas dispersion? (A) Agitated vessels (B) Bubble cap tray towers (C) Perforated sieve tray towers (D) Spray towers

Description : Which of the following equipments is not used for gas dispersion? (A) Agitated vessels (B) Bubble cap tray towers (C) Perforated sieve tray towers (D) Spray towers

Last Answer : (D) Spray towers

Out of the following gas-liquid contacting devices, for a given set of operating conditions, gas pressure drop is the least in __________ tower. (A) Wetted wall (B) Bubble cap (C) Perforated tray (D) Packed

Description : Out of the following gas-liquid contacting devices, for a given set of operating conditions, gas pressure drop is the least in __________ tower. (A) Wetted wall (B) Bubble cap (C) Perforated tray (D) Packed

Last Answer : (A) Wetted wall

Which of the following gas-liquid contacting devices incurs the least pressure drop for a particular duty? (A) Grid tray tower (B) Perforated tray tower (C) Wetted wall tower (D) Bubble cap tower

Description : Which of the following gas-liquid contacting devices incurs the least pressure drop for a particular duty? (A) Grid tray tower (B) Perforated tray tower (C) Wetted wall tower (D) Bubble cap tower

Last Answer : (D) Bubble cap tower

Which of the following same diameter columns gives lowest pressure drop per unit height? (A) Bubble-cap column (B) Sieve-plate column (C) Packed column (stacked)

Description : Which of the following same diameter columns gives lowest pressure drop per unit height? (A) Bubble-cap column (B) Sieve-plate column (C) Packed column (stacked)

Last Answer : (C) Packed column (stacked)

Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the possibility of tower wall collapse (B) Packed towers are preferred over plate towers for handling corrosive and foamy liquids (C) Diameter of randomly packed tower is normally more than 1.2 metres (D) Due to uneven supply and improper distribution of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Description : Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the ... of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Last Answer : (C) Diameter of randomly packed tower is normally more than 1.2 metres

Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments (B) Pressure drop in the equipment will be very high (C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Description : Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the ... C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Last Answer : (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments

The reason for preferring packed towers over plate towers in distillation practice is that the packed tower operation gives (A) Low pressure drop and high hold up (B) High pressure drop and low hold up (C) Low pressure drop and low hold up (D) High pressure drop and high hold up

Description : The reason for preferring packed towers over plate towers in distillation practice is that the packed tower operation gives (A) Low pressure drop and high hold up (B) High pressure drop and low hold ... C) Low pressure drop and low hold up (D) High pressure drop and high hold up

Last Answer : (C) Low pressure drop and low hold up

The use of pressurized radiator cap is to a) Reduce evaporation loss b) Increase engine operating temperature c) Increase boiling point of water d) Reduce heat losses

Description : The use of pressurized radiator cap is to a) Reduce evaporation loss b) Increase engine operating temperature c) Increase boiling point of water d) Reduce heat losses

Last Answer : ans c

Multipass heat exchangers are used (A) Because of simplicity of fabrication (B) For low heat load (C) To obtain higher heat transfer co-efficient and shorter tube (D) To reduce the pressure drop

Description : Multipass heat exchangers are used (A) Because of simplicity of fabrication (B) For low heat load (C) To obtain higher heat transfer co-efficient and shorter tube (D) To reduce the pressure drop

Last Answer : (C) To obtain higher heat transfer co-efficient and shorter tube

Duhring’s rule is important in solving problems on (A) Distillation (B) Crystallisation (C) Evaporation (D) Humidification

Description : Duhring’s rule is important in solving problems on (A) Distillation (B) Crystallisation (C) Evaporation (D) Humidification

Last Answer : (C) Evaporation

Make up water is supplied during cooling tower operation to compensate for water losses due to (A) Evaporation(B) Blowdown(C) Entrainment(D) All (A), (B) & (C)

Description : Make up water is supplied during cooling tower operation to compensate for water losses due to (A) Evaporation (B) Blowdown (C) Entrainment (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Very tall packed towers are divided into series of beds to (A) Reduce the overall pressure drop (B) Avoid channelling (C) Reduce liquid hold-up (D) Avoid flooding

Description : Very tall packed towers are divided into series of beds to (A) Reduce the overall pressure drop (B) Avoid channelling (C) Reduce liquid hold-up (D) Avoid flooding

Last Answer : (B) Avoid channelling

__________ columns are used for liquid dispersion in a continuous gas phase. (A) Packed (B) Pulse (C) Bubble cap (D) Sieve plate

Description : __________ columns are used for liquid dispersion in a continuous gas phase. (A) Packed (B) Pulse (C) Bubble cap (D) Sieve plate

Last Answer : (A) Packed

__________ column is used in gas absorption process. (A) Wetted wall (B) Sieve/perforated tray (C) Bubble cap (D) Packed

Description : __________ column is used in gas absorption process. (A) Wetted wall (B) Sieve/perforated tray (C) Bubble cap (D) Packed

Last Answer : (D) Packed

Which of the following is not categorised as a "mechanical operation”? (A) Agitation (B) Filtration (C) Size enlargement (D) Humidification

Description : Which of the following is not categorised as a "mechanical operation”? (A) Agitation (B) Filtration (C) Size enlargement (D) Humidification

Last Answer : (D) Humidification

The equipment frequently used for adiabatic humidification-cooling operation with recirculating liquid is (A) Natural draft cooling tower (B) Induced draft cooling tower (C) Spray chamber (D) None of these

Description : The equipment frequently used for adiabatic humidification-cooling operation with recirculating liquid is (A) Natural draft cooling tower (B) Induced draft cooling tower (C) Spray chamber (D) None of these

Last Answer : (C) Spray chamber

Water is a highly effective coolant for a car engine because _____ A. Water is good conductor of heat B. Water has very high specific heat capacity C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Description : Water is a highly effective coolant for a car engine because _____ A. Water is good conductor of heat B. Water has very high specific heat capacity C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Last Answer : ANSWER: A

Water is a highly effective coolant for a car engine because -----? A. Water is good conductor of heat B. Water has very high specific heat capacity (Answer) C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Description : Water is a highly effective coolant for a car engine because -----? A. Water is good conductor of heat B. Water has very high specific heat capacity (Answer) C. Water boils at a comparatively high temperature D. Evaporation of water produces lot of cooling

Last Answer : B. Water has very high specific heat capacity (Answer)

Perforated plate towers are unique for solvent extraction because, they provide (A) Higher contact area (B) Better contact of the phase (C) Repeated coalescence & redispersion of the drop phase (D) None of these

Description : Perforated plate towers are unique for solvent extraction because, they provide (A) Higher contact area (B) Better contact of the phase (C) Repeated coalescence & redispersion of the drop phase (D) None of these

Last Answer : (C) Repeated coalescence & redispersion of the drop phase

Though kinetics of ammonia synthesis dictates the use of low temperature for high equilibrium conversion, yet it is kept moderately high (550°C), because at low temperature (A) Rate of reaction is very low (B) Very high pressure is required resulting in costly pressure vessel (C) Space velocity of gas is very low resulting in decreased conversion (D) None of these

Description : Though kinetics of ammonia synthesis dictates the use of low temperature for high equilibrium conversion, yet it is kept moderately high (550°C), because at low temperature (A) Rate of reaction is very low ... (C) Space velocity of gas is very low resulting in decreased conversion (D) None of these

Last Answer : (A) Rate of reaction is very low

Use of packed towers for distillation is generally limited to the (A) Small sizes (B) Multi-component distillation (C) High pressure operation (D) Vacuum distillation

Description : Use of packed towers for distillation is generally limited to the (A) Small sizes (B) Multi-component distillation (C) High pressure operation (D) Vacuum distillation

Last Answer : (A) Small sizes

The main reason for dividing a tall packed tower into series of small towers is to (A) Minimise the overall pressure drop (B) Avoid flooding (C) Reduce liquid hold up (D) Avoid channelling

Description : The main reason for dividing a tall packed tower into series of small towers is to (A) Minimise the overall pressure drop (B) Avoid flooding (C) Reduce liquid hold up (D) Avoid channelling

Last Answer : (D) Avoid channelling

. The most widely used crude topping column in refineries is the__________ column.(A) Bubble-cap(B) Packed bed(C) Fluidised bed(D) Perforated plate

Description : . The most widely used crude topping column in refineries is the__________ column. (A) Bubble-cap (B) Packed bed (C) Fluidised bed (D) Perforated plate

Last Answer : (A) Bubble-cap

Which of the following liquid-vapor contacting devices provides maximum contact surface area for a particular duty? (A) Sieve plate column (B) Bubble cap column (C) Randomly packed column (D) Wetted wall column

Description : Which of the following liquid-vapor contacting devices provides maximum contact surface area for a particular duty? (A) Sieve plate column (B) Bubble cap column (C) Randomly packed column (D) Wetted wall column

Last Answer : (D) Wetted wall column

Hydrogenation of oil is carried out in a/an __________ in Vanaspati manufacturing plant. (A) Agitated vessel (B) Sieve tray column (C) Bubble cap column (D) Packed tower

Description : Hydrogenation of oil is carried out in a/an __________ in Vanaspati manufacturing plant. (A) Agitated vessel (B) Sieve tray column (C) Bubble cap column (D) Packed tower

Last Answer : (A) Agitated vessel

Small dia distillation column can be a (A) Packed column (B) Sieve tray (C) Bubble cap (D) Any of these

Description : Small dia distillation column can be a (A) Packed column (B) Sieve tray (C) Bubble cap (D) Any of these

Last Answer : (A) Packed column

Measurement of the interfacial area of mass transfer is achieved easily & accurately in case of a __________ column. (A) Spray (B) Packed (C) Bubble cap plate (D) Wetted wall

Description : Measurement of the interfacial area of mass transfer is achieved easily & accurately in case of a __________ column. (A) Spray (B) Packed (C) Bubble cap plate (D) Wetted wall

Last Answer : (D) Wetted wall

Which of the following equipments is used for liquid dispersion? (A) Packed column (B) Venturi scrubber (C) Bubble cap plate column (D) Wetted wall column

Description : Which of the following equipments is used for liquid dispersion? (A) Packed column (B) Venturi scrubber (C) Bubble cap plate column (D) Wetted wall column

Last Answer : Option B

In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Description : In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for ... bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Last Answer : (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column

Inside the distillation column, the (A) Driving force for the vapour flow is the pressure drop (B) Liquids are not always at their bubble points (C) Pressure increases gradually from bottom to the top of the column (D) None of these

Description : Inside the distillation column, the (A) Driving force for the vapour flow is the pressure drop (B) Liquids are not always at their bubble points (C) Pressure increases gradually from bottom to the top of the column (D) None of these

Last Answer : (A) Driving force for the vapour flow is the pressure drop

Which of these columns incurs the lowest pressure drop? (A) Packed column (with stacked packing) (B) Packed column (with dumped packing) (C) Bubble plate column (D) Pulse column

Description : Which of these columns incurs the lowest pressure drop? (A) Packed column (with stacked packing) (B) Packed column (with dumped packing) (C) Bubble plate column (D) Pulse column

Last Answer : (A) Packed column (with stacked packing)

Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure vessel used for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Description : Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure ... for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Last Answer : (B) High cost of the high pressure vessel used for the reactor

On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because – (1) metals have higher thermal capacity than plastics (2) plastics have a lower density than metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Description : On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because - (1) metals ... metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Last Answer : (3) metals are good conductors of heat Explanation: On a chilly day, the room temperature is lower than our body temperature. Since metals have a higher coefficient of thermal conductivity than plastic, they ... from our fingers will flow to the metal cap much more quickly than to the plastic body.

On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because : (1) metals have higher thermal capacity than plastics (2) plastics have a lower density than metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Description : On a cold day when the room temperature is 15°C, the metallic cap of a pen becomes much colder than its plastic body, though both are at the same temperature of 15°C, because : (1) metals ... metals (3) metals are good conductors of heat (4) plastics have a higher thermal conductivity than metals

Last Answer : metals are good conductors of heat

What Are The Factors That Affect The Rate Of Evaporation Of Water In Cooling Towers?

Description : What Are The Factors That Affect The Rate Of Evaporation Of Water In Cooling Towers?

Last Answer :  Amount of water surface area exposed.  The time of exposure.  The relative velocity of air passing over the droplets.  The RH of air.  The direction of airflow relative to water.

Which cooling Towers use a process similar to the one found in small evaporation active cooling units a) hyperbolic b) Tower c) condensate loop d) none of these

Description : Which cooling Towers use a process similar to the one found in small evaporation active cooling units a) hyperbolic b) Tower c) condensate loop d) none of these

Last Answer : a) hyperbolic

Which of the following statement(s) is/are true concerning the relationship between cardiac function and effective blood volume? a. A pulmonary capillary wedge pressure of 5–10 rules out fluid overload as a cause of pulmonary edema b. A shift to the right in the Frank-Starling curve is associated with compromised cardiac function c. Dilutional anemia may contribute to tachycardia even though blood volume and filling pressures are normal d. The sole purpose of a pulmonary artery catheter is to measure pulmonary artery pressure and cardiac output

Description : Which of the following statement(s) is/are true concerning the relationship between cardiac function and effective blood volume? a. A pulmonary capillary wedge pressure of 5-10 rules out ... sole purpose of a pulmonary artery catheter is to measure pulmonary artery pressure and cardiac output

Last Answer : Answer: b, c Although physical findings are often adequate to establish a diagnosis and institute management of cardiac failure, direct measurement of filling pressures of the right heart ( ... blood volume is normal, filling pressures are normal, and total body extracellular fluid is excessive

For which of the following unit operations, Lewis number is ofsignificance?(A) Adsorption(B) Binary distillation(C) Gas absorption(D) Humidification

Description : For which of the following unit operations, Lewis number is ofsignificance? (A) Adsorption (B) Binary distillation (C) Gas absorption (D) Humidification

Last Answer : (D) Humidification

Humidification involves mass transfer between a pure liquid phase and a fixed gas, which is (A) Insoluble in the liquid (B) Soluble in the liquid (C) Non-ideal in nature (D) At a fixed temperature

Description : Humidification involves mass transfer between a pure liquid phase and a fixed gas, which is (A) Insoluble in the liquid (B) Soluble in the liquid (C) Non-ideal in nature (D) At a fixed temperature

Last Answer : (A) Insoluble in the liquid

The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot be recovered by distillation (C) Its recovery cost by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Description : The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot ... by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Last Answer : (C) Its recovery cost by distillation may be prohibitively high

Though liquid ammonia itself is a fertiliser (with 82% nitrogen content) yet it is commonly not used as such in a tropical country like India, because it (A) Has a pungent smell (B) Vaporises at normal temperature (C) Is toxic and highly corrosive (D) Is in short supply

Description : Though liquid ammonia itself is a fertiliser (with 82% nitrogen content) yet it is commonly not used as such in a tropical country like India, because it (A) Has a pungent smell (B) Vaporises at normal temperature (C) Is toxic and highly corrosive (D) Is in short supply

Last Answer : (B) Vaporises at normal temperature

Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature (C) Electrostatic precipitator is the most efficient dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Description : Pick out the wrong statement. (A) A slight haze at the top of chimney indicates good combustion in the furnace (B) A bag filter incurs very small pressure drop and is very efficient for ... dust collection equipment for removal of submicronic dust particles present in flue gas (D) None of these

Last Answer : (B) A bag filter incurs very small pressure drop and is very efficient for removal of submicronic dust particles from flue gases at very high temperature

Evaporation losses depend upon (A) Area of the water surface and depth of the water (B) Nature of precipitation and type of vegetation (C) Humidity and wind velocity (D) All the above

Description : Evaporation losses depend upon (A) Area of the water surface and depth of the water (B) Nature of precipitation and type of vegetation (C) Humidity and wind velocity (D) All the above

Last Answer : Answer: Option D

Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward feeding in multiple effect evaporation (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Description : Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward ... (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Last Answer : (A) Get economical temperature difference by using moderate pressure steam

Although saturable reactors are extremely useful in some applications, their gain is low because of ____________. A. core hysteresis losses B. inductive reactance in the control winding C. IR drop throughout the load winding D. all of the above

Description : Although saturable reactors are extremely useful in some applications, their gain is low because of ____________. A. core hysteresis losses B. inductive reactance in the control winding C. IR drop throughout the load winding D. all of the above

Last Answer : Answer: A

Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low interfacial tension (C) When Henry's law constant is very small, then the mass transfer rate is controlled by the gas film resistance (D) Taylor-Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Description : Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low ... Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Last Answer : (A) Mechanical agitation is required, if the system has low interfacial tension

Soil mulch is useful in: (A) Minimize evaporation losses (B) Improving aeration (C) Improving drainage (D) Removing weeds

Description : Soil mulch is useful in: (A) Minimize evaporation losses (B) Improving aeration (C) Improving drainage (D) Removing weeds

Last Answer : (A) Minimize evaporation losses

Interception losses are due to (i) Evaporation (ii) Transpiration (iii) Stream flow The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Description : Interception losses are due to (i) Evaporation (ii) Transpiration (iii) Stream flow The correct answer is (A) Only (i) (B) (i) and (ii) (C) (ii) and (iii) (D) (i), (ii) and (iii)

Last Answer : Answer: Option A

Grindability index of a coal is 100. It implies that the (A) Coal can be pulverised with great difficulty (B) Coal can't be pulverised (C) Coal can be easily pulverised (D) Power consumption in grinding the coal will be very high

Description : Grindability index of a coal is 100. It implies that the (A) Coal can be pulverised with great difficulty (B) Coal can't be pulverised (C) Coal can be easily pulverised (D) Power consumption in grinding the coal will be very high

Last Answer : (C) Coal can be easily pulverised