N' plug flow reactors in series with a total volume 'V' gives the same conversion as a single plug flow reactor of volume 'V' for __________ order reactions. (A) First (B) Second (C) Third (D) Any

N' plug flow reactors in series with a total volume 'V' gives the same
conversion as a single plug flow reactor of volume 'V' for __________ order
reactions.
(A) First
(B) Second
(C) Third
(D) Any
by

1 Answer

Answer :

(D) Any
by

Related questions

For identical flow rate and feed composition, X plug flow reactors (PER) in series with a total volume V gives the same conversion as single (A) CSTR of volume V (B) PFR of volume V (C) CSTR of volume V/X (D) PFR of volume V/X

Description : For identical flow rate and feed composition, X plug flow reactors (PER) in series with a total volume V gives the same conversion as single (A) CSTR of volume V (B) PFR of volume V (C) CSTR of volume V/X (D) PFR of volume V/X

Last Answer : (B) PFR of volume V

For series reaction, the relative yield (A) Is always greater for plug-flow reactor than for the single CSTR of the same volume (B) Statement in (A) is wrong (C) Decreases with increasing conversion (D) Both (A) and (C) hold good

Description : For series reaction, the relative yield (A) Is always greater for plug-flow reactor than for the single CSTR of the same volume (B) Statement in (A) is wrong (C) Decreases with increasing conversion (D) Both (A) and (C) hold good

Last Answer : (D) Both (A) and (C) hold good

. A first order irreversible reaction, A → B is carried out separately in a constant volume as well as in a variable volume reactor for a particular period. It signifies that __________ in the two reactors. (A) Both conversion as well as concentration are same (B) Conversion in both will be the same but concentrations will be different (C) Both the conversion as well as concentrations will be different (D) None of these

Description : . A first order irreversible reaction, A → B is carried out separately in a constant volume as well as in a variable volume reactor for a particular period. It signifies that __________ in the two ... be different (C) Both the conversion as well as concentrations will be different (D) None of these

Last Answer : (B) Conversion in both will be the same but concentrations will be different

With increase in the order of reaction (for all positive reaction orders), the ratio of the volume of mixed reactor to the volume of plug flow reactor (for identical feed composition, flow rate and conversion). (A) Increases (B) Decreases (C) Remain same (D) Increases linearly

Description : With increase in the order of reaction (for all positive reaction orders), the ratio of the volume of mixed reactor to the volume of plug flow reactor (for identical feed composition, flow rate and conversion). (A) Increases (B) Decreases (C) Remain same (D) Increases linearly

Last Answer : (A) Increases

A back mix reactor is (A) Suitable for gas phase reactions (B) Ideal at very low conversion (C) Same as plug flow reactor (PFR) (D) Same as ideal stirred tank reactor

Description : A back mix reactor is (A) Suitable for gas phase reactions (B) Ideal at very low conversion (C) Same as plug flow reactor (PFR) (D) Same as ideal stirred tank reactor

Last Answer : (D) Same as ideal stirred tank reactor

For the same residence time, which one will give the maximum conversion? (A) Single stirred tank (v = 5 litres) (B) Two stirred tank (each of 2.5 litres) in series (C) Stirred tank followed by tubular flow reactor (each of 2.5 litres) (D) Single tubular flow reactor (v = 5 litres)

Description : For the same residence time, which one will give the maximum conversion? (A) Single stirred tank (v = 5 litres) (B) Two stirred tank (each of 2.5 litres) in series (C) Stirred tank followed by tubular flow reactor (each of 2.5 litres) (D) Single tubular flow reactor (v = 5 litres)

Last Answer : (D) Single tubular flow reactor (v = 5 litres)

The conversion for a first order liquid phase reaction. A → B in a CSTRis 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be (A) 60 (B) 75 (C) 90 (D) 100

Description : The conversion for a first order liquid phase reaction. A → B in a CSTRis 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be (A) 60 (B) 75 (C) 90 (D) 100

Last Answer : (B) 75

Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of feed at specified conditions are being fed into the reactor every hour (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Description : Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of ... one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Last Answer : (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor

Exothermic reactions are best carried out in (A) A CSTR (B) CSTR in series (C) A plug flow reactor followed by CSTR (D) CSTR followed by a plug flow reactor

Description : Exothermic reactions are best carried out in (A) A CSTR (B) CSTR in series (C) A plug flow reactor followed by CSTR (D) CSTR followed by a plug flow reactor

Last Answer : (D) CSTR followed by a plug flow reactor

The most unsuitable reactor for carrying out reactions in which high reactant concentration favours high yields is (A) Backmix reactor (B) Plug flow reactor (C) Series of CSTR (D) PFR in series

Description : The most unsuitable reactor for carrying out reactions in which high reactant concentration favours high yields is (A) Backmix reactor (B) Plug flow reactor (C) Series of CSTR (D) PFR in series

Last Answer : A) Backmix reactor

Autocatalytic reactions are best carried out in a (A) CSTR (B) CSTR in series (C) Plug flow reactor (D) Recycle reactor

Description : Autocatalytic reactions are best carried out in a (A) CSTR (B) CSTR in series (C) Plug flow reactor (D) Recycle reactor

Last Answer : (D) Recycle reactor

Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate or larger amounts of data (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order (D) The ratio of volumes of plug flow reactor to that of mixed reactor is always less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Description : Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate ... less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Last Answer : (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order

Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same (D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Description : Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence ... D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Last Answer : (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same

Backmixing is most predominant in (A) A well stirred batch reactor (B) A plug-flow reactor (C) A single CSTR (D) CSTR's connected in series

Description : Backmixing is most predominant in (A) A well stirred batch reactor (B) A plug-flow reactor (C) A single CSTR (D) CSTR's connected in series

Last Answer : (C) A single CSTR

A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume of the reacting mixture is V and the density of the liquid mixture is constant. The mass balance for A is (A) d(VCA )/dt = -F (CAF - CA ) - kCA 2V (B) d(VCA )/dt = F (CAF - CA ) - kCA 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

For all positive reaction orders for a particular duty, (A) Mixed reactor is always larger than the plug-flow reactor (B) Ratio of the volume of the mixed reactor to that of the plug-flow reactor decreases with order (C) Reactor size is independent of the type of flow (D) Density variation during reaction affects design

Description : For all positive reaction orders for a particular duty, (A) Mixed reactor is always larger than the plug-flow reactor (B) Ratio of the volume of the mixed reactor to that of the plug-flow ... (C) Reactor size is independent of the type of flow (D) Density variation during reaction affects design

Last Answer : (A) Mixed reactor is always larger than the plug-flow reactor

For a fluidised bed reactor, the most suitable/relevant model is a __________ model. (A) Tank in series (B) Bubbling bed (C) Plug flow (D) None of these

Description : For a fluidised bed reactor, the most suitable/relevant model is a __________ model. (A) Tank in series (B) Bubbling bed (C) Plug flow (D) None of these

Last Answer : (B) Bubbling bed

Pick out the wrong statemen(A) Autocatalytic reactions are exemplified by microbial fermentation reactions (B) The slowest step has the greatest influence on the overall reaction rate in case of an irreversible series reaction (C) The fractional conversion at any time is same for both the constant as well as the variable volume system in case of an irreversible unimolecular type first order reaction (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction

Description : Pick out the wrong statemen (A) Autocatalytic reactions are exemplified by microbial fermentation reactions (B) The slowest step has the greatest influence on the overall reaction rate in case of an ... reaction (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction

Last Answer : (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction

An endothermic second order reaction is carried out in an adiabatic plug flow reactor. The rate of heat generation is: (A) Maximum at the inlet of the reactor (B) Maximum at the exit of the reactor (C) Maximum at the centre of the reactor (D) Constant throughout the reactor

Description : An endothermic second order reaction is carried out in an adiabatic plug flow reactor. The rate of heat generation is: (A) Maximum at the inlet of the reactor (B) Maximum at the exit of the reactor (C) Maximum at the centre of the reactor (D) Constant throughout the reactor

Last Answer : (A) Maximum at the inlet of the reactor

With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Description : With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Last Answer : (A) Higher in P.F. reactor

The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit conversion is 20%, then the exit temperature (in k) is (Data: Heat of reaction at 298 K = - 50000 kJ/ kmole of A reacted Heat capacities CPA = CPB = 100kJ/kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Description : The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit ... /kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Last Answer : (C) 600

Which of the following will give maximum gas conversion? (A) Fixed bed reactor (B) Fluidised bed reactor (C) Semi-fluidised bed reactor (D) Plug-flow catalytic reactor

Description : Which of the following will give maximum gas conversion? (A) Fixed bed reactor (B) Fluidised bed reactor (C) Semi-fluidised bed reactor (D) Plug-flow catalytic reactor

Last Answer : (C) Semi-fluidised bed reactor

The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Description : The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Last Answer : (B) 5/8

In flow reactors, the performance equations interrelate the rate of reaction to the (A) Feed rate (B) Reactor volume (C) Extent of reaction (D) All (A), (B) and (C)

Description : In flow reactors, the performance equations interrelate the rate of reaction to the (A) Feed rate (B) Reactor volume (C) Extent of reaction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A first order reaction is to be treated in a series of two mixed reactors. The total volume of the two reactors is minimum, when the reactors are (A) Equal in size (B) Of different sizes (C) Of such size that the ratio of their volumes is < 5 (D) None of these

Description : A first order reaction is to be treated in a series of two mixed reactors. The total volume of the two reactors is minimum, when the reactors are (A) Equal in size (B) Of different sizes (C) Of such size that the ratio of their volumes is < 5 (D) None of these

Last Answer : (A) Equal in size

The ratio of volume of mixed reactor to the volume of P.F.R. (for identical flow rate, feed composition and conversion) for zero order reaction is: (A) ∞(B) 0 (C) 1 (D) > 1

Description : The ratio of volume of mixed reactor to the volume of P.F.R. (for identical flow rate, feed composition and conversion) for zero order reaction is: (A) ∞ (B) 0 (C) 1 (D) > 1

Last Answer : (C) 1

The conversion in a mixed reactor/accomplishing a reaction A → 3R is 50% when gaseous reactant 'A' is introduced at the rate of 1 litre/second and the leaving flow rate is 2 litres/second. The holding time for this operation is __________ second. (A) 0.5 (B) 1 (C) 2(D) 3

Description : The conversion in a mixed reactor/accomplishing a reaction A → 3R is 50% when gaseous reactant 'A' is introduced at the rate of 1 litre/second and the leaving flow rate is 2 litres/second. The holding time for this operation is __________ second. (A) 0.5 (B) 1 (C) 2 (D) 3

Last Answer : (A) 0.5

A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) Decreases (B) Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Description : A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) ... Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Last Answer : (C) Is at the highest allowable temperature throughout

An endothermic aqueous phase first order irreversible reaction is carried out in an adiabatic plug flow reactor. The rate of reaction: (A) Is maximum at the inlet of the reactor (B) Goes through a maximum along the length of the reactor (C) Goes through a minimum along the length of the reactor (D) Is maximum at the exit of the reactor

Description : An endothermic aqueous phase first order irreversible reaction is carried out in an adiabatic plug flow reactor. The rate of reaction: (A) Is maximum at the inlet of the reactor (B) Goes through a maximum ... through a minimum along the length of the reactor (D) Is maximum at the exit of the reactor

Last Answer : (A) Is maximum at the inlet of the reactor

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

In case of staged packed bed reactors carrying out exothermic reaction, use (A) High recycle for pure gas (B) Plug flow for dilute liquid requiring no large preheating of feed (C) Cold shot operations for a dilute solution requiring large preheating to bring the stream upto the reaction temperature (D) All (A), (B) and (C)

Description : In case of staged packed bed reactors carrying out exothermic reaction, use (A) High recycle for pure gas (B) Plug flow for dilute liquid requiring no large preheating of feed (C) Cold shot operations for a ... preheating to bring the stream upto the reaction temperature (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Kinetics of a catalytic reaction can be best studied on a/an __________ reactor. (A) Mixed (B) Integral (plug flow) (C) Differential (flow) (D) Either (A), (B) and (C)

Description : Kinetics of a catalytic reaction can be best studied on a/an __________ reactor. (A) Mixed (B) Integral (plug flow) (C) Differential (flow) (D) Either (A), (B) and (C)

Last Answer : (D) Either (A), (B) and (C)

The size of plug flow reactor (PFR) for all positive reaction orders and for any given duty, is __________ that of mixed reactor. (A) Greater than (B) Equal to (C) Smaller than (D) Unpredictable from the data

Description : The size of plug flow reactor (PFR) for all positive reaction orders and for any given duty, is __________ that of mixed reactor. (A) Greater than (B) Equal to (C) Smaller than (D) Unpredictable from the data

Last Answer : (C) Smaller than

Vegetable oils are hydrogenated in a __________ reactor. (A) Slurry (B) Plug flow (C) Homogeneous catalytic (D) None of these

Description : Vegetable oils are hydrogenated in a __________ reactor. (A) Slurry (B) Plug flow (C) Homogeneous catalytic (D) None of these

Last Answer : (A) Slurry

Kinetics of a solid catalysed reaction can best be studied in a __________ reactor. (A) Batch (B) Plug-flow (C) Mixed (D) None of these

Description : Kinetics of a solid catalysed reaction can best be studied in a __________ reactor. (A) Batch (B) Plug-flow (C) Mixed (D) None of these

Last Answer : (C) Mixed

Hydrogenation of oil takes place in a/an __________ reactor. (A) Autothermal (B) Trickle bed (C) Plug flow (D) None of these

Description : Hydrogenation of oil takes place in a/an __________ reactor. (A) Autothermal (B) Trickle bed (C) Plug flow (D) None of these

Last Answer : (B) Trickle bed

For an autocatalytic reactor, the suitable reactor set up is(A) P.F. reactors in series (B) CSTR in series (C) CSTR followed by P.F. reactor (D) P.F. reactor followed by CSTR

Description : For an autocatalytic reactor, the suitable reactor set up is (A) P.F. reactors in series (B) CSTR in series (C) CSTR followed by P.F. reactor (D) P.F. reactor followed by CSTR

Last Answer : (C) CSTR followed by P.F. reactor

A space time of 3 hours for a flow reactor means that (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours (B) Three reactor volumes of feed can be processed every hour (C) It takes three hours to dump the entire volume of the reactor with feed (D) Conversion is cent per cent after three hours

Description : A space time of 3 hours for a flow reactor means that (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours (B) Three reactor volumes of feed ... to dump the entire volume of the reactor with feed (D) Conversion is cent per cent after three hours

Last Answer : (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours

Space velocity (A) Describes the extensive operating characteristics of a tubular flow reactor (B) Is the maximum feed rate per unit volume of reactor for a given conversion (C) Is a measure of the ease of the reaction (D) All (A), (B) and (C)

Description : Space velocity (A) Describes the extensive operating characteristics of a tubular flow reactor (B) Is the maximum feed rate per unit volume of reactor for a given conversion (C) Is a measure of the ease of the reaction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

With increase in K2 /K1 in case of a unimolecular type elementary reactions as shown in the bellow figure, the fractional yield of 'R' in mixed reactor (for a given conversion of 'A'). (A) Decreases (B) Increases (C) Increases linearly (D) Remain same

Description : With increase in K2 /K1 in case of a unimolecular type elementary reactions as shown in the bellow figure, the fractional yield of 'R' in mixed reactor (for a given conversion of 'A'). (A) Decreases (B) Increases (C) Increases linearly (D) Remain same

Last Answer : (A) Decreases

For a __________ order chemical reaction as shown in the bellow figure, the fractional conversion of reactant 'A' is proportional to time. (A) Zero (B) First (C) Second (D) Third

Description : For a __________ order chemical reaction as shown in the bellow figure, the fractional conversion of reactant 'A' is proportional to time. (A) Zero (B) First (C) Second (D) Third

Last Answer : (A) Zero

A backmix reactor (A) Is same as plug-flow reactor (B) Is same as ideal stirred tank reactor (C) Employs mixing in axial direction only (D) Is most suitable for gas phase reaction

Description : A backmix reactor (A) Is same as plug-flow reactor (B) Is same as ideal stirred tank reactor (C) Employs mixing in axial direction only (D) Is most suitable for gas phase reaction

Last Answer : (B) Is same as ideal stirred tank reactor

An isothermal irreversible reaction is being carried out in an ideal tubular flow reactor. The conversion in this case will __________ with decrease in space time. (A) Increase (B) Increase exponentially (C) Decrease (D) Remain unchanged

Description : An isothermal irreversible reaction is being carried out in an ideal tubular flow reactor. The conversion in this case will __________ with decrease in space time. (A) Increase (B) Increase exponentially (C) Decrease (D) Remain unchanged

Last Answer : (C) Decrease

For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a single CSTR for high yield (B) Tubular reactor is preferred over a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Description : For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a ... a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Last Answer : (C) Both (A) and (B)

A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions(D) Obtaining uniform polymerisation products in highly exothermicreactions

Description : A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions (D) Obtaining uniform polymerisation products in highly exothermic reactions

Last Answer : (C) Liquid phase reactions

Which of the following is not a dimension-less group used in catalysis? (Where, D = dispersion co-efficient, cm2 /sec.D1 = diffusion co-efficient; cm2 /sec L = length of the reactor, cm t = time, sec, v = volumetric flow rate, cm3 /sec. V = volume, cm3 .) (A) Reactor dispersion number (D/vL) (B) Reduced time (vt/V) (C) Thiele modulus L √(k/D1 ) (D) None of these

Description : Which of the following is not a dimension-less group used in catalysis? (Where, D = dispersion co-efficient, cm2 /sec.D1 = diffusion co-efficient; cm2 /sec L = length of the reactor, cm t = time, sec, v = volumetric ... (D/vL) (B) Reduced time (vt/V) (C) Thiele modulus L √(k/D1 ) (D) None of these

Last Answer : (D) None of these

Recycling back of outlet stream to the reactor from an ideal CSTR carrying out a first order liquid phase reaction will result in __________ in conversion. (A) Decrease (B) Increase (C) No change (D) Either (A) or (B), depends on the type of reaction

Description : Recycling back of outlet stream to the reactor from an ideal CSTR carrying out a first order liquid phase reaction will result in __________ in conversion. (A) Decrease (B) Increase (C) No change (D) Either (A) or (B), depends on the type of reaction

Last Answer : (C) No change

An irreversible first order reaction is being carried out in a CSTR and PFR of same volume. The liquid flow rates are same. The relative conversion will (A) Be more in CSTR than in PFR (B) Be more in PFR than in CSTR (C) Be same in both cases (D) Depend on the temperature

Description : An irreversible first order reaction is being carried out in a CSTR and PFR of same volume. The liquid flow rates are same. The relative conversion will (A) Be more in CSTR than in PFR (B) Be more in PFR than in CSTR (C) Be same in both cases (D) Depend on the temperature

Last Answer : (B) Be more in PFR than in CSTR