Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate or larger amounts of data (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order (D) The ratio of volumes of plug flow reactor to that of mixed reactor is always less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Pick out the wrong statement.
(A) The integral method of analysing kinetic data is used when the data is
scattered
(B) The differential method of analysing kinetic data requires more accurate
or larger amounts of data
(C) When the reaction rate is independent of temperature, the reaction is said
to be of zero order
(D) The ratio of volumes of plug flow reactor to that of mixed reactor is
always less than one for identical feed composition, flow rate, conversion and
for all positive reaction orders
by

1 Answer

Answer :

(C) When the reaction rate is independent of temperature, the reaction is said
to be of zero order
by

Related questions

With increase in the order of reaction (for all positive reaction orders), the ratio of the volume of mixed reactor to the volume of plug flow reactor (for identical feed composition, flow rate and conversion). (A) Increases (B) Decreases (C) Remain same (D) Increases linearly

Description : With increase in the order of reaction (for all positive reaction orders), the ratio of the volume of mixed reactor to the volume of plug flow reactor (for identical feed composition, flow rate and conversion). (A) Increases (B) Decreases (C) Remain same (D) Increases linearly

Last Answer : (A) Increases

For all positive reaction orders for a particular duty, (A) Mixed reactor is always larger than the plug-flow reactor (B) Ratio of the volume of the mixed reactor to that of the plug-flow reactor decreases with order (C) Reactor size is independent of the type of flow (D) Density variation during reaction affects design

Description : For all positive reaction orders for a particular duty, (A) Mixed reactor is always larger than the plug-flow reactor (B) Ratio of the volume of the mixed reactor to that of the plug-flow ... (C) Reactor size is independent of the type of flow (D) Density variation during reaction affects design

Last Answer : (A) Mixed reactor is always larger than the plug-flow reactor

Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a measure of its capacity and is equal to the residence time when the density of reaction mixture is constant (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty (D) In an ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Description : Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a ... ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Last Answer : (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty

The ratio of volume of mixed reactor to the volume of P.F.R. (for identical flow rate, feed composition and conversion) for zero order reaction is: (A) ∞(B) 0 (C) 1 (D) > 1

Description : The ratio of volume of mixed reactor to the volume of P.F.R. (for identical flow rate, feed composition and conversion) for zero order reaction is: (A) ∞ (B) 0 (C) 1 (D) > 1

Last Answer : (C) 1

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

Integral method for analysing the kinetic data is used (A) When the data are scattered (B) For testing specific mechanisms with simple rate expressions (C) Both (A) and (B) (D) None of these

Description : Integral method for analysing the kinetic data is used (A) When the data are scattered (B) For testing specific mechanisms with simple rate expressions (C) Both (A) and (B) (D) None of these

Last Answer : (C) Both (A) and (B)

Differential method for analysing the kinetic data is used (A) For testing complicated mechanisms (B) When the data are scattered (C) When rate expressions are very simple (D) None of these

Description : Differential method for analysing the kinetic data is used (A) For testing complicated mechanisms (B) When the data are scattered (C) When rate expressions are very simple (D) None of these

Last Answer : (A) For testing complicated mechanisms

Kinetics of a catalytic reaction can be best studied on a/an __________ reactor. (A) Mixed (B) Integral (plug flow) (C) Differential (flow) (D) Either (A), (B) and (C)

Description : Kinetics of a catalytic reaction can be best studied on a/an __________ reactor. (A) Mixed (B) Integral (plug flow) (C) Differential (flow) (D) Either (A), (B) and (C)

Last Answer : (D) Either (A), (B) and (C)

Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same (D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Description : Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence ... D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Last Answer : (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same

The size of plug flow reactor (PFR) for all positive reaction orders and for any given duty, is __________ that of mixed reactor. (A) Greater than (B) Equal to (C) Smaller than (D) Unpredictable from the data

Description : The size of plug flow reactor (PFR) for all positive reaction orders and for any given duty, is __________ that of mixed reactor. (A) Greater than (B) Equal to (C) Smaller than (D) Unpredictable from the data

Last Answer : (C) Smaller than

For identical flow rate and feed composition, X plug flow reactors (PER) in series with a total volume V gives the same conversion as single (A) CSTR of volume V (B) PFR of volume V (C) CSTR of volume V/X (D) PFR of volume V/X

Description : For identical flow rate and feed composition, X plug flow reactors (PER) in series with a total volume V gives the same conversion as single (A) CSTR of volume V (B) PFR of volume V (C) CSTR of volume V/X (D) PFR of volume V/X

Last Answer : (B) PFR of volume V

The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit conversion is 20%, then the exit temperature (in k) is (Data: Heat of reaction at 298 K = - 50000 kJ/ kmole of A reacted Heat capacities CPA = CPB = 100kJ/kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Description : The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit ... /kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Last Answer : (C) 600

For series reaction, the relative yield (A) Is always greater for plug-flow reactor than for the single CSTR of the same volume (B) Statement in (A) is wrong (C) Decreases with increasing conversion (D) Both (A) and (C) hold good

Description : For series reaction, the relative yield (A) Is always greater for plug-flow reactor than for the single CSTR of the same volume (B) Statement in (A) is wrong (C) Decreases with increasing conversion (D) Both (A) and (C) hold good

Last Answer : (D) Both (A) and (C) hold good

With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Description : With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Last Answer : (A) Higher in P.F. reactor

Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of feed at specified conditions are being fed into the reactor every hour (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Description : Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of ... one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Last Answer : (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor

The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Description : The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Last Answer : (B) 5/8

A space time of 3 hours for a flow reactor means that (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours (B) Three reactor volumes of feed can be processed every hour (C) It takes three hours to dump the entire volume of the reactor with feed (D) Conversion is cent per cent after three hours

Description : A space time of 3 hours for a flow reactor means that (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours (B) Three reactor volumes of feed ... to dump the entire volume of the reactor with feed (D) Conversion is cent per cent after three hours

Last Answer : (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours

A plug-flow reactor is characterised by (A) High capacity (B) Presence of axial mixing (C) Presence of lateral mixing (D) Constant composition and temperature of reaction mixture

Description : A plug-flow reactor is characterised by (A) High capacity (B) Presence of axial mixing (C) Presence of lateral mixing (D) Constant composition and temperature of reaction mixture

Last Answer : (C) Presence of lateral mixing

Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not exceed 4 (C) Both the rolls run necessarily at the same speed (D) Reduction ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Description : Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not ... ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Last Answer : (C) Both the rolls run necessarily at the same speed

Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, one reactant is charged batch wise, while the other reactant is fed continuously (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Description : Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, ... system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Last Answer : (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system

A space velocity of 5 hr -1 means that (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour (B) After every 5 hours, reactor is being filled with the feed (C) Cent per cent conversion can be achieved in at least 5 hours (D) A fixed conversion of a given batch of feed takes 5 hours

Description : A space velocity of 5 hr -1 means that (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour (B) After every 5 hours, reactor is being filled with the feed ... be achieved in at least 5 hours (D) A fixed conversion of a given batch of feed takes 5 hours

Last Answer : (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour

An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The residence time required (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Description : An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The ... (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Last Answer : (C) 1.60

Space velocity (A) Describes the extensive operating characteristics of a tubular flow reactor (B) Is the maximum feed rate per unit volume of reactor for a given conversion (C) Is a measure of the ease of the reaction (D) All (A), (B) and (C)

Description : Space velocity (A) Describes the extensive operating characteristics of a tubular flow reactor (B) Is the maximum feed rate per unit volume of reactor for a given conversion (C) Is a measure of the ease of the reaction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The conversion in a mixed reactor/accomplishing a reaction A → 3R is 50% when gaseous reactant 'A' is introduced at the rate of 1 litre/second and the leaving flow rate is 2 litres/second. The holding time for this operation is __________ second. (A) 0.5 (B) 1 (C) 2(D) 3

Description : The conversion in a mixed reactor/accomplishing a reaction A → 3R is 50% when gaseous reactant 'A' is introduced at the rate of 1 litre/second and the leaving flow rate is 2 litres/second. The holding time for this operation is __________ second. (A) 0.5 (B) 1 (C) 2 (D) 3

Last Answer : (A) 0.5

A first order reaction requires two unequal sized CSTR. Which of thefollowing gives higher yield?(A) Large reactor followed by smaller one(B) Smaller reactor followed by larger one(C) Either of the arrangement (A) or (B) will give the same yield(D) Data insufficient, can't be predicted

Description : A first order reaction requires two unequal sized CSTR. Which of thefollowing gives higher yield? (A) Large reactor followed by smaller one (B) Smaller reactor followed by larger one (C) Either of the arrangement (A) or (B) will give the same yield (D) Data insufficient, can't be predicted

Last Answer : (C) Either of the arrangement (A) or (B) will give the same yield

N' plug flow reactors in series with a total volume 'V' gives the same conversion as a single plug flow reactor of volume 'V' for __________ order reactions. (A) First (B) Second (C) Third (D) Any

Description : N' plug flow reactors in series with a total volume 'V' gives the same conversion as a single plug flow reactor of volume 'V' for __________ order reactions. (A) First (B) Second (C) Third (D) Any

Last Answer : (D) Any

Kinetics of a solid catalysed reaction can best be studied in a __________ reactor. (A) Batch (B) Plug-flow (C) Mixed (D) None of these

Description : Kinetics of a solid catalysed reaction can best be studied in a __________ reactor. (A) Batch (B) Plug-flow (C) Mixed (D) None of these

Last Answer : (C) Mixed

Pick out the wrong statement. (A) Visible radiation provides the necessary activation energy in photochemical reactions (B) The order and molecularity of a complex reaction may not be the same (C) For a second order reaction, the slope of the graph/plot between rate and (concentration) is equal to the rate constant (k) (D) Molecularity of the reaction is always a whole number greater than zero

Description : Pick out the wrong statement. (A) Visible radiation provides the necessary activation energy in photochemical reactions (B) The order and molecularity of a complex reaction may not be the same (C) For ... rate constant (k) (D) Molecularity of the reaction is always a whole number greater than zero

Last Answer : (B) The order and molecularity of a complex reaction may not be the same

Pick out the wrong statemen(A) Autocatalytic reactions are exemplified by microbial fermentation reactions (B) The slowest step has the greatest influence on the overall reaction rate in case of an irreversible series reaction (C) The fractional conversion at any time is same for both the constant as well as the variable volume system in case of an irreversible unimolecular type first order reaction (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction

Description : Pick out the wrong statemen (A) Autocatalytic reactions are exemplified by microbial fermentation reactions (B) The slowest step has the greatest influence on the overall reaction rate in case of an ... reaction (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction

Last Answer : (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction

An endothermic second order reaction is carried out in an adiabatic plug flow reactor. The rate of heat generation is: (A) Maximum at the inlet of the reactor (B) Maximum at the exit of the reactor (C) Maximum at the centre of the reactor (D) Constant throughout the reactor

Description : An endothermic second order reaction is carried out in an adiabatic plug flow reactor. The rate of heat generation is: (A) Maximum at the inlet of the reactor (B) Maximum at the exit of the reactor (C) Maximum at the centre of the reactor (D) Constant throughout the reactor

Last Answer : (A) Maximum at the inlet of the reactor

An endothermic aqueous phase first order irreversible reaction is carried out in an adiabatic plug flow reactor. The rate of reaction: (A) Is maximum at the inlet of the reactor (B) Goes through a maximum along the length of the reactor (C) Goes through a minimum along the length of the reactor (D) Is maximum at the exit of the reactor

Description : An endothermic aqueous phase first order irreversible reaction is carried out in an adiabatic plug flow reactor. The rate of reaction: (A) Is maximum at the inlet of the reactor (B) Goes through a maximum ... through a minimum along the length of the reactor (D) Is maximum at the exit of the reactor

Last Answer : (A) Is maximum at the inlet of the reactor

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to iron catalyst in ammonia synthesis reaction (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Description : Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to ... Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Last Answer : (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot

The conversion XA and residence time data are collected for zero order liquid phase reaction in a stirred tank reactor. Which of the following will be a straight line? (A) XA Vs . τ (B) XA Vs ln τ (C) XA /(1 - XA )Vs τ (D) XA (1 - XA )Vs τ

Description : The conversion XA and residence time data are collected for zero order liquid phase reaction in a stirred tank reactor. Which of the following will be a straight line? (A) XA Vs . τ (B) XA Vs ln τ (C) XA /(1 - XA )Vs τ (D) XA (1 - XA )Vs τ

Last Answer : (A) XA Vs . τ

Pick out the wrong statement. (A) In a multistep reaction, the slowest step is the rate determining step (B) In general, the rate of a reaction becomes triple for every 10°C rise in temperature (C) Slow chemical reactions have generally high values of activation energy (D) Molecularity of a reaction cannot be zero but the order of a reaction can be zero

Description : Pick out the wrong statement. (A) In a multistep reaction, the slowest step is the rate determining step (B) In general, the rate of a reaction becomes triple for every 10°C rise in temperature (C ... energy (D) Molecularity of a reaction cannot be zero but the order of a reaction can be zero

Last Answer : (B) In general, the rate of a reaction becomes triple for every 10°C rise in temperature

A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume of the reacting mixture is V and the density of the liquid mixture is constant. The mass balance for A is (A) d(VCA )/dt = -F (CAF - CA ) - kCA 2V (B) d(VCA )/dt = F (CAF - CA ) - kCA 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

A first order reaction is to be treated in a series of two mixed reactors. The total volume of the two reactors is minimum, when the reactors are (A) Equal in size (B) Of different sizes (C) Of such size that the ratio of their volumes is < 5 (D) None of these

Description : A first order reaction is to be treated in a series of two mixed reactors. The total volume of the two reactors is minimum, when the reactors are (A) Equal in size (B) Of different sizes (C) Of such size that the ratio of their volumes is < 5 (D) None of these

Last Answer : (A) Equal in size

Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given conversion (C) Percentage conversion increases with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A high space velocity means that a given (A) Reaction can be accomplished with small reactor (B) Conversion can be obtained with a high feed rate (C) Both (A) and (B) (D) None of these

Description : A high space velocity means that a given (A) Reaction can be accomplished with small reactor (B) Conversion can be obtained with a high feed rate (C) Both (A) and (B) (D) None of these

Last Answer : (C) Both (A) and (B)

A back mix reactor is (A) Suitable for gas phase reactions (B) Ideal at very low conversion (C) Same as plug flow reactor (PFR) (D) Same as ideal stirred tank reactor

Description : A back mix reactor is (A) Suitable for gas phase reactions (B) Ideal at very low conversion (C) Same as plug flow reactor (PFR) (D) Same as ideal stirred tank reactor

Last Answer : (D) Same as ideal stirred tank reactor

Which of the following will give maximum gas conversion? (A) Fixed bed reactor (B) Fluidised bed reactor (C) Semi-fluidised bed reactor (D) Plug-flow catalytic reactor

Description : Which of the following will give maximum gas conversion? (A) Fixed bed reactor (B) Fluidised bed reactor (C) Semi-fluidised bed reactor (D) Plug-flow catalytic reactor

Last Answer : (C) Semi-fluidised bed reactor

An exothermic reaction takes place in an adiabatic reactor. The product temperature __________ reactor feed temperature. (A) Is always equal to (B) Is always greater than (C) Is always less than (D) May be greater or less than

Description : An exothermic reaction takes place in an adiabatic reactor. The product temperature __________ reactor feed temperature. (A) Is always equal to (B) Is always greater than (C) Is always less than (D) May be greater or less than

Last Answer : (B) Is always greater than

Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally by stimulus￾response technique (C) For studying a chemical reaction, it is desirable to monitor the reactants during initial stages and the products during the final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Description : Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally ... final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Last Answer : (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Plug

A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) Decreases (B) Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Description : A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) ... Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Last Answer : (C) Is at the highest allowable temperature throughout

Which of the following is the optimum operating condition for an exothermic reversible reaction taking place in a plug-flow reactor? (A) Temperature should be high in the beginning and decreased towards the end of the reaction (B) Very low temperature should be used throughout the reaction (C) Very high temperature should be used throughout the reaction (D) None of these

Description : Which of the following is the optimum operating condition for an exothermic reversible reaction taking place in a plug-flow reactor? (A) Temperature should be high in the beginning and decreased towards ... reaction (C) Very high temperature should be used throughout the reaction (D) None of these

Last Answer : (A) Temperature should be high in the beginning and decreased towards the end of the reaction