The most commonly used chemical coagulant in water treatment is
(A) Ferrous sulphate
(B) Alum
(C) Lime
(D) Hydrazine

1 Answer

Answer :

(B) Alum

Related questions

Description : Most widely and commonly used coagulant for the removal of suspended impurities in water is (A) Bleaching powder (B) Slaked lime (C) Alum (D) Copper sulphate

Last Answer : (C) Alum

Description : Which is the most widely used coagulant for the treatment of turbid water? (A) Alum (aluminium sulphate) (B) Lime (C) Ferric chloride (D) Sodium aluminate

Last Answer : (A) Alum (aluminium sulphate)

Description : Pick out the one which is not a chemical coagulant. (A) Aluminium sulphate (B) Ferrous sulphate (C) Hydrated lime (D) Chloramine

Last Answer : (D) Chloramine

Description : Suspended solid present in the waste water generated in blast furnace gas cooling and cleaning plant is removed by (A) Biological oxygen pond (B) Radial settling tank (thickener) using coagulant (lime & ferrous sulphate) (C) Lagoons (D) Filtration

Last Answer : (B) Radial settling tank (thickener) using coagulant (lime & ferrous sulphate)

Description : Which of the following is used as a coagulant in water treatment? (A) Chloramine (B) Chlorine (C) Ferrous sulphate (D) Hydrogen peroxide

Last Answer : (C) Ferrous sulphate

Description : For controlling algae, the most commonly used chemical, is  (A) Copper sulphate  (B) Alum  (C) Lime  (D) Bleaching powder 

Last Answer : (A) Copper sulphate 

Description : Q No: 291 The coagulant widely used for sewage treatment, is A. Alum B. Ferric chloride C. Ferric sulphate D. Chlorinated copperas

Last Answer : ANS: B

Description : Ferrous sulphate is used in water treatment as a/an - (1) Oxidizing agent (2) Reducing agent (3) Coagulant aid (4) Adsorbent

Last Answer : (3) Coagulant aid

Description : Ferrous sulphate is used in water treatment as a/an (1) Oxidizing agent (2) Reducing agent (3) Coagulant aid (4) Adsorbent

Last Answer : Coagulant aid

Description : The most widely used coagulant for removing suspended impurities from water is (A) Bleaching powder (B) Chlorine (C) Calcium sulphate (D) Alum

Last Answer : (D) Alum

Description : Temporary hardness of water can be removed by (A) Addition of alum (a coagulant) (B) Boiling (C) Filtration (through gravity sand filter) (D) Addition of lime

Last Answer : (B) Boiling

Description : The coagulant which is generally not used for treating the sewage, is A. Alum B. Ferric chloride C. Ferric sulphate D. Chlorinated copperas

Last Answer : ANS: A

Description : Mostly used coagulant, is  (A) Chlorine  (B) Alum  (C) Lime  (D) Bleaching powder

Last Answer : (B) Alum

Description : Concrete tank can be used to store (A) Alum (B) Ferrous sulphate (C) Sulphuric acid (D) Saturated brine

Last Answer : (D) Saturated brine

Description : Alum [Al2 (SO4 )3 ] is used as a coagulant in water treatment to remove (A) Colour (B) Turbidity (C) Bacteria (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Alum is chemically (A) Copper sulphate (B) Aluminium sulphate (C) Ferrous sulphate (D) Ferric sulphate

Last Answer : (B) Aluminium sulphate

Description : Anion exchanger is regenerated usually with (A) NaOH (B) H2SO4 (C) Hydrazine (D) Alum solution

Last Answer : (A) NaOH

Description : Cation exchanger is regenerated usually with (A) NaOH (B) H2SO4 (C) Hydrazine (D) Alum solution

Last Answer : (B) H2SO4

Description : In sewage treatment, its sedimentation is speeded up by commonly adding (A) Hydrochloric acid (B) Lime (C) Copper sulphate (D) Sodium sulphate

Last Answer : (B) Lime

Description : To control the growth of algae in reservoirs, the compound which is used, is  (A) Bleaching powder  (B) Copper sulphate  (C) Lime solution (D) Alum solution 

Last Answer : (B) Copper sulphate

Description : Natural rubber is obtained from latex, which is a colloidal dispersion of rubber in water. Which of the following is used as a coagulant in latex? (A) Ammonium alum (B) Potassium alum (C) Both ‘a’ & ‘b’ (D) Neither ‘a’ nor ‘b

Last Answer : (C) Both ‘a’ & ‘b

Description : The purpose of adding Na2CO3 to water of low alkalinity is to (A) Permit the use of alum as a coagulant (B) Increase the softening capacity of zeolite (C) Facilitate easy regeneration of zeolite (D) All (A), (B) and (C)

Last Answer : (A) Permit the use of alum as a coagulant

Description : Aluminium salt commonly used to stop bleeding is - (1) Aluminium nitrate (2) Aluminium sulphate (3) Aluminium Chloride (4) Potash alum

Last Answer : (2) Aluminium sulphate Explanation: Alum (Aluminium Sulfate) is used to stop bleeding. For example, Styptic pencils containing aluminium sulfate are used as astringents to prevent bleeding from small shaving cuts. It constricts blood vessels to stop the flow of blood.

Description : Aluminium salt commonly used to stop bleeding is (1) Aluminium nitrate (2) Aluminium sulphate (3) Aluminium Chloride (4) Potash alum

Last Answer : Aluminium sulphate

Description : Alum is a (A) Coagulant (B) Flocculent (C) Catalyst (D) Disinfectant

Last Answer : (A) Coagulant

Description : Chemical name of 'alum' is (A) Barium sulphate (B) Aluminium sulphate (C) Aluminium chloride (D) Calcium sulphate

Last Answer : (B) Aluminium sulphate

Description : The amount of chemical coagulant added for treatment of polluted water __________ with increase in temperature of the polluted water to be treated. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease; depends on the chemical characteristics of polluted water

Last Answer : (A) Decreases

Description : Which of the following is used as a coagulant in treating turbid water? (A) Chlorine (B) Ferric sulphate (C) Calcium sulphate (D) Activated carbon

Last Answer : (B) Ferric sulphate

Description : 2g of ferrous sulphate crystals are heated in a dry boiling tube. (i) List any two observations. (ii) Name the type of chemical reaction taking place. (iii) ‘Write the chemical equation for the reaction. -Chemistry

Last Answer : Answer. (i) •Green colour of Fe SO4 disappears and reddish brown solid is formed. • Smell of burning sulphur. (ii) Decomposition reaction

Description : Foul odour and bad taste of water is removed by treating with (A) Alum (B) Bleaching powder (C) Activated carbon (D) Copper sulphate

Last Answer : (C) Activated carbon

Description : Main use of hydrazine is (A) As a rocket fuel (B) In water treatment (C) As a disinfectant (D) As fire retardant

Last Answer : (A) As a rocket fuel

Description : Hydrazine is used in water treatment for the removal of (A) Colloidal impurities (B) Dissolved oxygen (C) Turbidity (D) Chlorinous taste

Last Answer : (B) Dissolved oxygen

Description : The most prominent single cause of corrosion in boiler-tubes, drums, economisers and steam superheaters in a thermal power plant boiler is the (A) Water alkalinity & leakage (B) Hydrazine addition during ... treatment (C) Release of non-condensable gas from water in the boiler (D) Scale formation

Last Answer : (C) Release of non-condensable gas from water in the boiler

Description : Calcium sulphate is known as-----? A. Epsom salt B. Gypsum salt (Answer) C. Blue vitriol D. Potash alum

Last Answer : B. Gypsum salt (Answer)

Description : Permanent - hardness of water may be removed by addition of – (1) Alum (2) Sodium carbonate (3) Lime (4) Potassium Permangante

Last Answer : (2) Sodium carbonate Explanation: Sodium carbonate (also known as washing soda or soda ash) is a sodium salt of carbonic acid. In domestic use, it is used as a water softener in laundering. It ... with the detergent being used. Sodium carbonate can be used to remove grease, oil and wine stains.

Description : The temporary hardness of water can be removed by (A) Boiling (B) Adding lime (C) Adding alum (D) Filtration

Last Answer : (A) Boiling

Description : The most ideal disinfectant used for drinking water throughout the world, is (A) Alum (B) Lime (C) Chlorine (D) Nitrogen

Last Answer : (C) Chlorine

Description : Permanent hardness of water can be removed by  (A) Adding alum  (B) Adding lime  (C) Adding chlorine  (D) Zeolite process

Last Answer : (D) Zeolite process

Description : Permanent – hardness of water may be removed by addition of (1) Alum (2) Sodium carbonate (3) Lime (4) Potassium Permangante

Last Answer : Sodium carbonate

Description : Aluminium storage vessel can be used to store (A) Aqua regia (B) Ferrous sulphate (C) Hydrochloric acid (10%) (D) None of these

Last Answer : (D) None of these

Description : __________ is not a fertiliser. (A) Calcium ammonium nitrate (B) Ferrous sulphate (C) Liquid ammonia (D) Ammonium sulphate

Last Answer : (B) Ferrous sulphate

Description : Blue vitriol is chemically (A) Copper sulphate (B) Ferrous sulphate (C) Copper nitrate (D) Aluminium sulphate

Last Answer : (A) Copper sulphate

Description : Which of the following is an yellow pigment? (A) Titanium dioxide (B) Ferrous sulphate (C) Lead chromates (D) Zinc sulphides

Last Answer : (C) Lead chromates

Description : Pick out the true statement pertaining to water treatment. (A) Slow sand filters can remove colour completely (B) Activated carbon can be used for taste & odour control without subsequent filtration ... of water (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation

Last Answer : (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation

Description : Which among the following changes are endothermic in nature (a) decomposition of ferrous sulphate (b) dissolution of ammonium chloride in water (c) both (a) and (b) (d) dilution of hydrochloric acid

Last Answer : (c) both (a) and (b)

Description : Saw dust can be rendered chemically inert by boiling it in water containing (A) Ferrous sulphate (B) Potassium chloride (C) Ammonia (D) Nitric acid

Last Answer : Answer: Option A

Description : List any two observations when Ferrous Sulphate is heated in a dry test tube? -Science

Last Answer : Two Observations Are: 1) Change in colour of crystals from green to white. 2) Evolution of gas. The gases evolved are SO2 and SO3.

Description : What is the colour of ferrous sulphate crystals? How does this colour change after heating? -Chemistry

Last Answer : Answer.The colour of ferrous sulphate is pale green. The colour changes to reddish brown on heating due to formation of iron (III) oxide. Give an example each for ... reactions. Write relevant balanced chemical equations also. Thermal decomposition reaction: Photochemical decomposition reaction:

Description : In the titration of `K_(2)Cr_(2)O_(7)` and ferrous sulphate, following data is obtained: `V_(1)` mL of `K_(2)Cr_(2)O_(7)` solution of molarity `M_(1)`

Last Answer : In the titration of `K_(2)Cr_(2)O_(7)` and ferrous sulphate, following data is obtained: `V_(1)` mL of `K_(2)Cr_ ... V_(2)` D. `M_(1)V_(1)=M_(2)V_(2)`

Description : An aluminium strip is kept immersed in a freshly prepared ferrous sulphate solution taken in a test tube, the change observed is that a) Green solution slowly turns brown b) Lower end of the test ... c)A colourless gas with smell of burning sulphur is evolved c)Light green solution changes to blue

Last Answer : a) Green solution slowly turns brown