The temporary hardness of water can be removed by
(A) Boiling
(B) Adding lime
(C) Adding alum
(D) Filtration

1 Answer

Answer :

(A) Boiling

Related questions

Description : Temporary hardness of water can be removed by (A) Addition of alum (a coagulant) (B) Boiling (C) Filtration (through gravity sand filter) (D) Addition of lime

Last Answer : (B) Boiling

Description : Permanent hardness of water can be removed by  (A) Adding alum  (B) Adding lime  (C) Adding chlorine  (D) Zeolite process

Last Answer : (D) Zeolite process

Description : Permanent hardness of water can be removed by (A) Simply boiling (B) Adding alum (C) Passing it through cation & anion exchangers (D) All (A), (B) and (C)

Last Answer : (C) Passing it through cation & anion exchangers

Description : Pick out the true statement pertaining to water treatment. (A) Slow sand filters can remove colour completely (B) Activated carbon can be used for taste & odour control without subsequent filtration ... of water (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation

Last Answer : (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation

Description : Permanent - hardness of water may be removed by addition of – (1) Alum (2) Sodium carbonate (3) Lime (4) Potassium Permangante

Last Answer : (2) Sodium carbonate Explanation: Sodium carbonate (also known as washing soda or soda ash) is a sodium salt of carbonic acid. In domestic use, it is used as a water softener in laundering. It ... with the detergent being used. Sodium carbonate can be used to remove grease, oil and wine stains.

Description : Permanent – hardness of water may be removed by addition of (1) Alum (2) Sodium carbonate (3) Lime (4) Potassium Permangante

Last Answer : Sodium carbonate

Description : Which of the following processes can remove both temporary as well as permanent hardness of water? (A) Filtration (B) Boiling (C) Distillation (D) None of these

Last Answer : (C) Distillation

Description : __________ is removed from water by lime-soda process. (A) Foul smell and taste (B) Iron and manganese (C) Temporary hardness (D) Permanent hardness

Last Answer : (C) Temporary hardness

Description : Permanent hardness of water cannot be removed by (a) Boiling (b) Adding caustic soda (c) Distillation (d) Adding soda

Last Answer : Ans:(a)

Description : Permanent hardness of water can be removed by (A) Boiling (B) Adding Ca(OH)2 (C) Boiling it with Na2CO3 (D) None of these

Last Answer : (C) Boiling it with Na2CO3

Description : If water smells bad, then that odour can be removed by adding – (1) alum (2) bleach (3) activated carbon (4) deactivated nitrogen

Last Answer : (3) activated carbon Explanation: Adding powdered activated carbon to water or using of granular activated carbon (GAC) in the water filter can remove bad taste and foul odour. Powdered activated ... the activated carbon and retained, but the material doing the adsorption does not change size.

Description : If water smells bad, then that odour can be removed by adding - (1) alum (2) bleach (3) activated carbon (4) deactivated nitrogen

Last Answer : (3) activated carbon Explanation: Adding powdered activated carbon to water or using of granular activated carbon (GAC) in the water filter can remove bad taste and foulodor.

Description : If water smells bad, then that odour can be removed by adding (1) alum (2) bleach (3) activated carbon (4) deactivated nitrogen

Last Answer : activated carbon

Description : Consider the following statements: 1. Carbonate hardness is due to bicarbonates. 2. Non-carbonate hardness is due to sulphates and chlorides of Ca and Mg. 3. Both the hardnesses can be removed by lime-soda method. 4. Both the hardnesses can be ... (b) 1, 2 & 4 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Last Answer : (a) 1, 2 & 3 only

Description : By boiling water, hardness can be removed if it is due to  (A) Calcium sulphate  (B) Magnesium sulphate  (C) Calcium nitrate  (D) Calcium bicarbonate 

Last Answer : (D) Calcium bicarbonate 

Description : Hardness of water can be removed by boiling if it is due to  (A) Calcium bicarbonates  (B) Calcium sulphates  (C) Calcium chloride  (D) Calcium nitrates 

Last Answer : (A) Calcium bicarbonates 

Description : The best process of disinfection of public water supply, is by  (A) Boiling  (B) Chlorination  (C) Adding lime  (D) Adding ozone 

Last Answer : (B) Chlorination 

Description : Suspended solid present in the waste water generated in blast furnace gas cooling and cleaning plant is removed by (A) Biological oxygen pond (B) Radial settling tank (thickener) using coagulant (lime & ferrous sulphate) (C) Lagoons (D) Filtration

Last Answer : (B) Radial settling tank (thickener) using coagulant (lime & ferrous sulphate)

Description : Iron & manganese present as pollutant in water cannot be removed by (A) Ion exchange process (B) Oxidation followed by settling & filtration (C) Lime soda process or manganese zeolite process (D) Chlorination

Last Answer : (D) Chlorination

Description : Iron and manganese present as pollutants in water cannot be removed by_____ (1) oxidation followed by settling and filtration (2) chlorination (3) ion exchange process (4) lime soda process or manganese zeolite process

Last Answer : chlorination

Description : The most ideal disinfectant used for drinking water throughout the world, is (A) Alum (B) Lime (C) Chlorine (D) Nitrogen

Last Answer : (C) Chlorine

Description : For controlling algae, the most commonly used chemical, is  (A) Copper sulphate  (B) Alum  (C) Lime  (D) Bleaching powder 

Last Answer : (A) Copper sulphate 

Description : Mostly used coagulant, is  (A) Chlorine  (B) Alum  (C) Lime  (D) Bleaching powder

Last Answer : (B) Alum

Description : To control the growth of algae in reservoirs, the compound which is used, is  (A) Bleaching powder  (B) Copper sulphate  (C) Lime solution (D) Alum solution 

Last Answer : (B) Copper sulphate

Description : In water treatment, alum [Al2 (SO4 )3 ] is used for the process of (A) Filtration (B) Coagulation (C) Sedimentation (D) Disinfection

Last Answer : (B) Coagulation

Description : Carbonates in water produce (A) Temporary hardness (B) Permanent hardness (C) Acidity (D) Alkanity

Last Answer : (A) Temporary hardness

Description : The purpose of adding Na2CO3 to water of low alkalinity is to (A) Permit the use of alum as a coagulant (B) Increase the softening capacity of zeolite (C) Facilitate easy regeneration of zeolite (D) All (A), (B) and (C)

Last Answer : (A) Permit the use of alum as a coagulant

Description : The most commonly used chemical coagulant in water treatment is (A) Ferrous sulphate (B) Alum (C) Lime (D) Hydrazine

Last Answer : (B) Alum

Description : Which is the most widely used coagulant for the treatment of turbid water? (A) Alum (aluminium sulphate) (B) Lime (C) Ferric chloride (D) Sodium aluminate

Last Answer : (A) Alum (aluminium sulphate)

Description : Most widely and commonly used coagulant for the removal of suspended impurities in water is (A) Bleaching powder (B) Slaked lime (C) Alum (D) Copper sulphate

Last Answer : (C) Alum

Description : To remove very fine suspended particles from water, the method adopted is  (A) Screening  (B) Sedimentation  (C) Boiling  (D) Filtration

Last Answer : To remove very fine suspended particles from water, the method adopted is  (A) Screening  (B) Sedimentation  (C) Boiling  (D) Filtration

Description : In order to provide colour, hardness and strength to the cement, the ingredient used is (a) Lime (b) Solica (c) Alumina (d) Iron oxide

Last Answer : (d) Iron oxide

Description : Foul odour and bad taste of water is removed by treating with (A) Alum (B) Bleaching powder (C) Activated carbon (D) Copper sulphate

Last Answer : (C) Activated carbon

Description : Lime putty (A) Is made from hydraulic lime (B) Is made by adding lime to water (C) Can be used only upto three days (D) All of above

Last Answer : Answer: Option D

Description : Hydraulic lime is obtained by (A) Burning of lime stone (B) Burning of kankar (C) Adding water to quick lime (D) Calcination of pure clay

Last Answer : Answer: Option B

Description : Workability improved by adding (A) Fly ash (B) Hydrated lime (C) Calcium chloride (D) All the above

Last Answer : Answer: Option D

Description : The workability of concrete can be improved by adding (a) Hydrated lime (b) Fly ash (c) Calcium chloride (d) All the above

Last Answer : (d) All the above

Description : Pick up the correct statement from the following:  (A) Due to boiling, the bacterias present in water can be destroyed  (B) Lime may be used for softening hard water  (C) Excess lime when added to water, raises the pH value of water  (D) All the above 

Last Answer : (D) All the above 

Description : Temporary hardness of water is due to the presence of which thing? -General Knowledge

Last Answer : The answer is 'Magnesiumbicarbonate '

Description : Temporary hardness of water is due to the presence of which thing? -General Knowledge

Last Answer : answer:

Description : Temporary hardness of water is due to the presence of which thing? -General Knowledge

Last Answer : answer:

Description : The reaction involved during the removal of temporary hardness of water is:

Last Answer : The reaction involved during the removal of temporary hardness of water is: A. `2CaCl_(2)+(NaPO_(3))_ ... (Delta)rarrCaCO_(3)+H_(2)O+CO_(2)darr`

Description : The temporary hardness of water is due to :

Last Answer : The temporary hardness of water is due to : A. `CaCl_(2)` B. `Ca(HCO_(3))_(2)` C. NaCl D. `Na_(2)SO_(4)`

Description : Temporary hardness of water is due to the presence of which salts?

Last Answer : Bicarbonates of Calcium & Magnesium

Description : Temporary hardness of water can be re- moved by?

Last Answer : repeated boiling or adding lime

Description : Temporary hardness of water is due to the presence of?

Last Answer : bicarbonates of calcium and magnesium

Description : Which compounds are responsible for permanent and temporary hardness of water?

Last Answer : Ans-Permanent hardness is due to chlorides and sulphates of calcium and magnesium While temporary hardness is due to bicarbonates of calcium and magessium.

Description : Name the method used to remove temporary hardness of water?

Last Answer : Ans-Clark s method OR By Boiling

Description : Presence of __________ hardness is responsible for the temporary hardness in water. (A) Carbonate (B) Calcium (C) Chloride (D) Sulphate

Last Answer : (B) Calcium

Description : . Presence of iron and manganese in water causes (A) Reduction in its dissolved oxygen content (B) Discoloration of bathroom fixtures (C) Temporary hardness (D) None of these

Last Answer : (B) Discoloration of bathroom fixtures