Which of the following statement is False about the efficiency of the given channel? a. If we want to send big packets on the channel, then Stop and Wait is good choice. b. If length of packet increases, efficiency of channel also increases. c. Distance between sender and receiver is directly proportional to efficiency of channel. d. Efficient might be less if capacity of channel is high

Which of the following statement is False
about the efficiency of the given channel?
a. If we want to send big packets on the
channel, then Stop and Wait is good
choice.
b. If length of packet increases,
efficiency of channel also increases.
c. Distance between sender and
receiver is directly proportional to
efficiency of channel.
d. Efficient might be less if capacity of
channel is high
by

1 Answer

Answer :

Distance between sender and
receiver is directly proportional to
efficiency of channel.
by

Related questions

Consider a link with packet loss probability of 0.2. What is the expected number of transmissions it would take to transfer 200 packets given that the stop and wait protocol is used? a. 125 b. 250 c. 225

Description : Consider a link with packet loss probability of 0.2. What is the expected number of transmissions it would take to transfer 200 packets given that the stop and wait protocol is used? a. 125 b. 250 c. 225

Last Answer : b. 250

Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Description : Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Last Answer : Stop-and-Wait

Which transmission technique guarantees that data packets will be received by the receiver in the same order in which they were sent by the sender? (A) Broadcasting (B) Unicasting (C) Packet Switching (D) Circuit Switching

Description : Which transmission technique guarantees that data packets will be received by the receiver in the same order in which they were sent by the sender? (A) Broadcasting (B) Unicasting (C) Packet Switching (D) Circuit Switching

Last Answer : (D) Circuit Switching

Inthe _____ Protocol, the sender sends its frames oneafter another with noregard to the receiver. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Description : Inthe _____ Protocol, the sender sends its frames oneafter another with noregard to the receiver. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Last Answer : Stop-and-Wait B) Simplest

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

In Go-Back-N window, when the timer of the packet times out, several packets have to be resent even some may have arrived safe. Whereas in Selective Repeat window, the sender resends ___________ A. Packet which are not lost B. Only those packets which are lost or corrupted C. Packet from starting D. All the packets

Description : In Go-Back-N window, when the timer of the packet times out, several packets have to be resent even some may have arrived safe. Whereas in Selective Repeat window, the sender resends ___________ A ... lost B. Only those packets which are lost or corrupted C. Packet from starting D. All the packets

Last Answer : B. Only those packets which are lost or corrupted

______ is a static algorithm in which every incoming packet is sent out on every outgoing line except the one it arrives on. This method usually generates vast number of duplicate packets.. A. Flooding B. Wait and watch C. congestion D. both a and c

Description : ______ is a static algorithm in which every incoming packet is sent out on every outgoing line except the one it arrives on. This method usually generates vast number of duplicate packets.. A. Flooding B. Wait and watch C. congestion D. both a and c

Last Answer : A. Flooding

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errorsd. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

State weather the following statement is true or false for IPV6 Addressing 1). IPV6 is a routable protocol that addresses, routes, fragments, and reassembles packets 2).IPV6 is a connectionless, unreliable datagram protocol. 3). An IPV6 packet consists of an IPV6 header and an IPV6 payload. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Description : State weather the following statement is true or false for IPV6 Addressing 1). IPV6 is a routable protocol that addresses, routes, fragments, and reassembles packets 2).IPV6 is a connectionless, unreliable datagram protocol. 3). ... C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Last Answer : A. 1. True, 2. true, 3. true

Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same destination can take different routes in the network c. IP ensures that a packet is discarded if it is unable to reach its destination within a given number of hops d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

Description : Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same ... outgoing packets; the route is determined only by the routing tables in the routers on the way

Last Answer : d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed. A) exactly 10 B) less than10 C) more than 10 D) none of the above

Description : For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed. A) exactly 10 B) less than10 C) more than 10 D) none of the above

Last Answer : exactly 10

For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed A. exactly 10 B. less than 10 C. more than 10 D. none of the above

Description : For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed A. exactly 10 B. less than 10 C. more than 10 D. none of the above

Last Answer : B. High-level data link control

The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can receive and send datasimultaneously C. can sendor receive data one ata time D. can do one way data transmission only E. None of the above

Description : The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can ... data one ata time D. can do one way data transmission only E. None of the above

Last Answer : can do one way data transmission only

Most packet switches use this principle ____________ a) Stop and wait b) Store and forward c) Store and wait d) Stop and forward

Description : Most packet switches use this principle ____________ a) Stop and wait b) Store and forward c) Store and wait d) Stop and forward

Last Answer : b) Store and forward

Indicate the false statement about the resistance of a wire – (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of crosssection of wire (4) resistance of metallic wire increases with increase in temperature

Description : Indicate the false statement about the resistance of a wire – (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of crosssection of wire (4) resistance of metallic wire increases with increase in temperature

Last Answer : (3) it is directly proportional to the area of cross-section of wire Explanation: The property of conductor due to which it opposes the flow of current through it is called Resistance. It is ... potential difference across its ends to the current flowing through it The SI unit of resistance is ohm.

Indicate the false statement about the resistance of a wire (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of cross-section of wire (4) resistance of metallic wire increases with increase in temperature

Description : Indicate the false statement about the resistance of a wire (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of cross-section of wire (4) resistance of metallic wire increases with increase in temperature

Last Answer :  it is directly proportional to the area of cross-section of wire

For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. Discard packets that reach later than that time c. Prevent packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Description : For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. ... packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Last Answer : c. Prevent packets from looping indefinitely

A __________ is a device that forwards packets between networks by processing the routing information included in the packet.a) bridge b) firewall c) router d) hub

Description : A __________ is a device that forwards packets between networks by processing the routing information included in the packet. a) bridge b) firewall c) router d) hub

Last Answer : c) router

In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Description : In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Last Answer : synchronous

If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : the IP address of therouter found inthe routing table

f the sender is a host and wants tosend a packet toanotherhost on the samenetwork, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : f the sender is a host and wants tosend a packet toanotherhost on the samenetwork, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : hedestination IP address in the datagram header

ECE Board Exam March 1996 The capture area of an antenna is directly proportional to the A. frequency of the received signal B. distance between transmitter and receiver C. gain of the antenna D. power density of the signal

Description : ECE Board Exam March 1996 The capture area of an antenna is directly proportional to the A. frequency of the received signal B. distance between transmitter and receiver C. gain of the antenna D. power density of the signal

Last Answer : C. gain of the antenna

Which feature of Go Back N ARQ mechanism possesses an ability to assign the sliding window in the forward direction? a. Control Variables b. Sender Sliding Window c. Receiver Sliding Window d. Resending of frames

Description : Which feature of Go Back N ARQ mechanism possesses an ability to assign the sliding window in the forward direction? a. Control Variables b. Sender Sliding Window c. Receiver Sliding Window d. Resending of frames

Last Answer : b. Sender Sliding Window

The Post Office Protocol is an ………... protocol with both client (sender/receiver) and …………...functions A. electronic mail, server (storage) B. three layer , server C. UDP, transfer D. TCP, server

Description : The Post Office Protocol is an ………... protocol with both client (sender/receiver) and …………...functions A. electronic mail, server (storage) B. three layer , server C. UDP, transfer D. TCP, server

Last Answer : A. electronic mail, server (storage)

Which feature of Go-Back-N ARQ mechanism possesses an ability to assign the sliding window in the forward diretion? A. Control Variables B. Sender Sliding Window C. Receiver Sliding Window D. Resending of frames

Description : Which feature of Go-Back-N ARQ mechanism possesses an ability to assign the sliding window in the forward diretion? A. Control Variables B. Sender Sliding Window C. Receiver Sliding Window D. Resending of frames

Last Answer : B. Sender Sliding Window

In SMTP mail transaction flow, the sender SMTP establishes a TCP connection with the destination SMTP and then waits for the server to send a ………. a. 220 service ready message b. 421 service not available message c. Both of the above d. None of the above

Description : In SMTP mail transaction flow, the sender SMTP establishes a TCP connection with the destination SMTP and then waits for the server to send a ………. a. 220 service ready message b. 421 service not available message c. Both of the above d. None of the above

Last Answer : c. Both of the above

The sender SMTP establishes a TCP connection with the destination SMTP and then waits for the server to send a ____ Service ready message.. A. 420 B. 320 C. 220 D. 120

Description : The sender SMTP establishes a TCP connection with the destination SMTP and then waits for the server to send a ____ Service ready message.. A. 420 B. 320 C. 220 D. 120

Last Answer : C. 220

What will be the efficiency of a Stop and Wait protocol, if the transmission time for a frame is 20ns and the propagation time is 30ns? a. 20% b. 25% c. 40% d. 66%

Description : What will be the efficiency of a Stop and Wait protocol, if the transmission time for a frame is 20ns and the propagation time is 30ns? a. 20% b. 25% c. 40% d. 66%

Last Answer : b. 25%

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

Flooding is also a……... algorithm, usually generates ………... of duplicate packets. A. Static, vast number B. dynamic , vast number C. Static, less number D. dynamic , less number

Description : Flooding is also a……... algorithm, usually generates ………... of duplicate packets. A. Static, vast number B. dynamic , vast number C. Static, less number D. dynamic , less number

Last Answer : A. Static, vast number

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

What are the basic elements of communication? (a) Sender and receiver (b) Message and channel of communication (c) Response and feedback (d) All of the above

Description : What are the basic elements of communication? (a) Sender and receiver (b) Message and channel of communication (c) Response and feedback (d) All of the above

Last Answer : (d) All of the above

A person, group, or organisation that has a meaning it intends and attempts to share with a receiver or an audience is a A)medium of transmission. B)source. C)relay channel. D)decoder. E)sender.

Description : A person, group, or organisation that has a meaning it intends and attempts to share with a receiver or an audience is a A)medium of transmission. B)source. C)relay channel. D)decoder. E)sender.

Last Answer : B)source.

Which one of the following statements is FALSE? a. Packet switching leads to better utilization of bandwidth resources than circuit switching. b. Packet switching results in less variation in delay than circuit switching. c. Packet switching requires more per packet processing than circuit switching d. Packet switching can lead to reordering unlike in circuit switching

Description : Which one of the following statements is FALSE? a. Packet switching leads to better utilization of bandwidth resources than circuit switching. b. Packet switching results in less variation ... than circuit switching d. Packet switching can lead to reordering unlike in circuit switching

Last Answer : Packet switching results in less variation in delay than circuit switching.

Incorrect statement for co-efficient of friction could be that A. The coefficient of friction is denoted by the Greek letter µ. B. The coefficient of friction is directly proportional to the force of friction C. The coefficient of friction is constant even in the conditions of fast slipping and high contact pressure D. The coefficient of friction is inversely proportional to the force pressing the surfaces together

Description : Incorrect statement for co-efficient of friction could be that A. The coefficient of friction is denoted by the Greek letter µ. B. The coefficient of friction is directly proportional to ... D. The coefficient of friction is inversely proportional to the force pressing the surfaces together

Last Answer : The coefficient of friction is constant even in the conditions of fast slipping and high contact pressure

_______ control refers to aset of proceduresused torestrict the amount ofdata that the sender can send before waiting foracknowledgment. A) Flow B) Error C) Transmission D) none of the above

Description : _______ control refers to aset of proceduresused torestrict the amount ofdata that the sender can send before waiting foracknowledgment. A) Flow B) Error C) Transmission D) none of the above

Last Answer : Flow

Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Description : Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Last Answer : a. 2 sec

In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose of the jamming signal is to pad the frames that are smaller than the minimum frame size. c. A station continues to transmit the packet even after the collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Description : In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose ... collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Last Answer : The exponential backoff mechanism reduces the probability of collision on retransmissions

. If there is only one station with a packet to send, this guarantees that there will ………….. For that packet. A. never be a collision B. be a collision C. be an improvement D. direction

Description : . If there is only one station with a packet to send, this guarantees that there will ………….. For that packet. A. never be a collision B. be a collision C. be an improvement D. direction

Last Answer : A. never be a collision

If a book packet infringe the condition of size and weight a) It will be treated as letter mail and double the deficiency charged b) It will be treated as parcel and double the deficiency charged. c) It will treated as letter/PL mail and double the deficiency charged whichever is less d) Shall be returned to sender after canceling the stamps

Description : If a book packet infringe the condition of size and weight a) It will be treated as letter mail and double the deficiency charged b) It will be treated as parcel and double the deficiency ... double the deficiency charged whichever is less d) Shall be returned to sender after canceling the stamps

Last Answer : d) Shall be returned to sender after canceling the stamps

For breach of condition, book packet containing periodicals will be treated a) As letter and double the deficiency is charged b) As parcel and double the deficiency is charged c) As letter/parcel whichever is less and difference in postage charged d) Will not be transmitted, but returned to sender

Description : For breach of condition, book packet containing periodicals will be treated a) As letter and double the deficiency is charged b) As parcel and double the deficiency is charged c) As letter/parcel whichever is less and difference in postage charged d) Will not be transmitted, but returned to sender

Last Answer : c) As letter/parcel whichever is less and difference in postage charged

Each IP address can identify the ………... or ………... of IP packets. A. source, destination B. length, size C. source, length D. Size , destination

Description : Each IP address can identify the ………... or ………... of IP packets. A. source, destination B. length, size C. source, length D. Size , destination

Last Answer : A. source, destination

Symmetric - key cryptography refers to ______methods in which both the sender and receiver share the same key ( or , less commonly, in which their keys are different but related in an easily computable way): a) Encryption b) Decryption c) Both of above d) None of These

Description : Symmetric - key cryptography refers to ______methods in which both the sender and receiver share the same key ( or , less commonly, in which their keys are different but related in an easily computable way): a) Encryption b) Decryption c) Both of above d) None of These

Last Answer : a) Encryption

Symmetric - key cryptography refers to ______methods in which both the sender and receiver share the same key ( or , less commonly, in which their keys are different but related in an easily computable way): a) Encryption b) Decryption c) Both of above d) None of These

Description : Symmetric - key cryptography refers to ______methods in which both the sender and receiver share the same key ( or , less commonly, in which their keys are different but related in an easily computable way): a) Encryption b) Decryption c) Both of above d) None of These

Last Answer : a) Encryption

If the available channel is a ____channel, wecannot send a digital signaldirectly to thechannel. A) low-pass B) bandpass C) low rate D) high rate

Description : If the available channel is a ____channel, wecannot send a digital signaldirectly to thechannel. A) low-pass B) bandpass C) low rate D) high rate

Last Answer : bandpass

In Stop-and-Wait ARQ, we use sequence numbers to number the frames. The sequence numbers are based on __________arithmetic. A) modulo-2 B) modulo-4 C) modulo-m D) none of the above

Description : In Stop-and-Wait ARQ, we use sequence numbers to number the frames. The sequence numbers are based on __________arithmetic. A) modulo-2 B) modulo-4 C) modulo-m D) none of the above

Last Answer : modulo-2