Which of the following is not correct in relation to multi-destination routing? a. is same as broadcast routing b. contains the list of all destinations c. data is not sent by packets d. there are multiple receivers

Which of the following is not correct in
relation to multi-destination routing?
a. is same as broadcast routing
b. contains the list of all destinations
c. data is not sent by packets
d. there are multiple receivers
by

1 Answer

Answer :

c. data is not sent by packets
by

Related questions

Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same destination can take different routes in the network c. IP ensures that a packet is discarded if it is unable to reach its destination within a given number of hops d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

Description : Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same ... outgoing packets; the route is determined only by the routing tables in the routers on the way

Last Answer : d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

A multicast message is sent from _______ to _______. A) onesource; one destination B) onesource; multiple destinations C) multiple sources; onedestination D) noneof the above

Description : A multicast message is sent from _______ to _______. A) onesource; one destination B) onesource; multiple destinations C) multiple sources; onedestination D) noneof the above

Last Answer : onesource; multiple destinations

_______ inthe data link layer separates a message from one source toa destination, or from other messages going from other sources to other destinations. A) Digitizing B) Controlling C) Framing D) none of the above

Description : _______ inthe data link layer separates a message from one source toa destination, or from other messages going from other sources to other destinations. A) Digitizing B) Controlling C) Framing D) none of the above

Last Answer : Framing

In unicast routing,each router in the domain has a table thatdefines a______ path tree to possible destinations. A) average B) longest C) shortest D) none of the above

Description : In unicast routing,each router in the domain has a table thatdefines a______ path tree to possible destinations. A) average B) longest C) shortest D) none of the above

Last Answer : shortest

Which algorithm is used to decide the path to transfer the packets from source to destination? (1) Routing (2) Pathing (3) Selecting (4) Directing

Description : Which algorithm is used to decide the path to transfer the packets from source to destination? (1) Routing (2) Pathing (3) Selecting (4) Directing

Last Answer : Routing

User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly

Last Answer : a. all UDP packets are treated independently by transport layer

User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received in the same order as sent order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Description : User datagram protocol is called connectionless because _____________ a. all UDP packets are treated independently by transport layer b. it sends data as a stream of related packets c. it is received ... order d. it sends data very quickly Answer: Option(a) 4. Transmission control protocol ____

Last Answer : a. all UDP packets are treated independently by transport layer

User datagram protocol is called connectionless because _____________ A. all UDP packets are treated independently by transport layer B. it sends data as a stream of related packets C. it is received in the same order as sent order D. it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ A. all UDP packets are treated independently by transport layer B. it sends data as a stream of related packets C. it is received in the same order as sent order D. it sends data very quickly

Last Answer : A. all UDP packets are treated independently by transport layer

User datagram protocol is called connectionless because _____________ a) all UDP packets are treated independently by transport layer b) it sends data as a stream of related packets c) it is received in the same order as sent order d) it sends data very quickly

Description : User datagram protocol is called connectionless because _____________ a) all UDP packets are treated independently by transport layer b) it sends data as a stream of related packets c) it is received in the same order as sent order d) it sends data very quickly

Last Answer : all UDP packets are treated independently by transport layer

A station in a network forwards incoming packets byplacing them on its shortest output queue. Whatrouting algorithm is being used? A. hot potatorouting B. flooding C. static routing D. delta routing E. None of the above

Description : A station in a network forwards incoming packets byplacing them on its shortest output queue. Whatrouting algorithm is being used? A. hot potatorouting B. flooding C. static routing D. delta routing E. None of the above

Last Answer : hot potatorouting

A __________ is a device that forwards packets between networks by processing the routing information included in the packet.a) bridge b) firewall c) router d) hub

Description : A __________ is a device that forwards packets between networks by processing the routing information included in the packet. a) bridge b) firewall c) router d) hub

Last Answer : c) router

For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed. A) exactly 10 B) less than10 C) more than 10 D) none of the above

Description : For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed. A) exactly 10 B) less than10 C) more than 10 D) none of the above

Last Answer : exactly 10

For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed A. exactly 10 B. less than 10 C. more than 10 D. none of the above

Description : For Stop-and-Wait ARQ, for 10 data packets sent, _______ acknowledgments are needed A. exactly 10 B. less than 10 C. more than 10 D. none of the above

Last Answer : B. High-level data link control

For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. Discard packets that reach later than that time c. Prevent packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Description : For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. ... packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Last Answer : c. Prevent packets from looping indefinitely

Each IP address can identify the ………... or ………... of IP packets. A. source, destination B. length, size C. source, length D. Size , destination

Description : Each IP address can identify the ………... or ………... of IP packets. A. source, destination B. length, size C. source, length D. Size , destination

Last Answer : A. source, destination

In _______forwarding, the full IP address of a destination isgiven in the routing table. A) next-hop B) network-specific C) host-specific D) default

Description : In _______forwarding, the full IP address of a destination isgiven in the routing table. A) next-hop B) network-specific C) host-specific D) default

Last Answer : host-specific

If an Ethernet destination address is08:07:06:05:44:33, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Description : If an Ethernet destination address is08:07:06:05:44:33, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Last Answer : unicast

f an Ethernet destination address is07:01:02:03:04:05, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Description : f an Ethernet destination address is07:01:02:03:04:05, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Last Answer : multicast

RPB creates a shortest path _______ tree from thesourceto each destination. A) unicast B) multicast C) broadcast D) none of the above

Description : RPB creates a shortest path _______ tree from thesourceto each destination. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : broadcast

Which of the following devices takes data sent from one network device and forwards it to the destination node based on MAC address ? a. Hub b. Modem c. Switch d. Gateway

Description : Which of the following devices takes data sent from one network device and forwards it to the destination node based on MAC address ? a. Hub b. Modem c. Switch d. Gateway

Last Answer : c. Switch

______ is a static algorithm in which every incoming packet is sent out on every outgoing line except the one it arrives on. This method usually generates vast number of duplicate packets.. A. Flooding B. Wait and watch C. congestion D. both a and c

Description : ______ is a static algorithm in which every incoming packet is sent out on every outgoing line except the one it arrives on. This method usually generates vast number of duplicate packets.. A. Flooding B. Wait and watch C. congestion D. both a and c

Last Answer : A. Flooding

Avalanche photodiode receivers can detect bits of transmitted data by receiving a. 100 photons b. 200 photons c. 2000 photons d. 300 photons

Description : Avalanche photodiode receivers can detect bits of transmitted data by receiving a. 100 photons b. 200 photons c. 2000 photons d. 300 photons

Last Answer : 200 photons

Which transmission technique guarantees that data packets will be received by the receiver in the same order in which they were sent by the sender? (A) Broadcasting (B) Unicasting (C) Packet Switching (D) Circuit Switching

Description : Which transmission technique guarantees that data packets will be received by the receiver in the same order in which they were sent by the sender? (A) Broadcasting (B) Unicasting (C) Packet Switching (D) Circuit Switching

Last Answer : (D) Circuit Switching

Is it jamaica is the only beautiful and memorable destination in Caribbean, please let me know more about other destinations?

Description : Is it jamaica is the only beautiful and memorable destination in Caribbean, please let me know more about other destinations?

Last Answer : Wow, seriously? Puerto rico, The Dominican republic, The Bahamas, the Virgin Islands. To name only a few.

The fee for special services Registration acknowledge, insurance certificate of posting and late fee are a) Not uniform for all destination b) Uniform for all destinations c) Of two different rates on for western countries and another for eastern countries d) None of these

Description : The fee for special services Registration acknowledge, insurance certificate of posting and late fee are a) Not uniform for all destination b) Uniform for all destinations c) Of two different rates on for western countries and another for eastern countries d) None of these

Last Answer : b) Uniform for all destinations

Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Description : Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Last Answer : a. 2 sec

In virtual circuit network each packet contains ___________ a. full source and destination address b. a short VC number c. only source address d. only destination address

Description : In virtual circuit network each packet contains ___________ a. full source and destination address b. a short VC number c. only source address d. only destination address

Last Answer : b. a short VC number

In virtual circuit network each packet contains ___________ A. full source and destination address B. a short VC number C. only source address D. only destination address

Description : In virtual circuit network each packet contains ___________ A. full source and destination address B. a short VC number C. only source address D. only destination address

Last Answer : B. a short VC number

The network layer is concerned with __________ of data. a. bits b. frames c. packets d. bytes

Description : The network layer is concerned with __________ of data. a. bits b. frames c. packets d. bytes

Last Answer : c. packets

The network layer encapsulates the data into _______of data. A. bits B. frames C. packets D. bytes

Description : The network layer encapsulates the data into _______of data. A. bits B. frames C. packets D. bytes

Last Answer : C. packets

The network layer is concerned with __________ of data. a) bits b) frames c) packets d) bytes

Description : The network layer is concerned with __________ of data. a) bits b) frames c) packets d) bytes

Last Answer : c) packets

The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Description : The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Last Answer : a) network layer

In link state routing algorithm after construction of link state packets, new routes are computed using: (1) DES algorithm (2) Dijkstra's algorithm (3) RSA algorithm (4) Packets

Description : In link state routing algorithm after construction of link state packets, new routes are computed using: (1) DES algorithm (2) Dijkstra's algorithm (3) RSA algorithm (4) Packets 

Last Answer : Answer: 2

IGMP helps a ________ router createand update a list of loyal members relatedto each router interface. A) broadcast B) unicast C) multicast D) noneof the above

Description : IGMP helps a ________ router createand update a list of loyal members relatedto each router interface. A) broadcast B) unicast C) multicast D) noneof the above

Last Answer : multicast

In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer e. none of above

Description : In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer e. none of above

Last Answer : network layer

The routing processor of arouter performs the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Description : The routing processor of arouter performs the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Last Answer : network

In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer

Description : In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer

Last Answer : a. network layer

Distance Vector Routing is a……... routing algorithm, it consists of a data structure called a ……… A. Static , routing table B. Dynamic, look-up tableC. Dynamic, routing table D. Static, look-up table

Description : Distance Vector Routing is a……... routing algorithm, it consists of a data structure called a ……… A. Static , routing table B. Dynamic, look-up table C. Dynamic, routing table D. Static, look-up table

Last Answer : C. Dynamic, routing table

Which of the following algorithms is not a broadcast routing algorithm ? (A) Flooding (B) Multidestination routing (C) Reverse path forwarding (D) All of the above

Description : Which of the following algorithms is not a broadcast routing algorithm ? (A) Flooding (B) Multidestination routing (C) Reverse path forwarding (D) All of the above

Last Answer : (D) All of the above

Who provides counseling pre move destination information and welcome packets?

Description : Who provides counseling pre move destination information and welcome packets?

Last Answer : ACS

Who provides counseling pre move destination information and welcome packets?

Description : Who provides counseling pre move destination information and welcome packets?

Last Answer : ACS

In TCP/IP Reference model, the job of ............... layer is to permit hosts to inject packets into any network and travel them independently to the destination. (A) Physical (B) Transport (C) Application (D) Host-to-network

Description : In TCP/IP Reference model, the job of ............... layer is to permit hosts to inject packets into any network and travel them independently to the destination. (A) Physical (B) Transport (C) Application (D) Host-to-network

Last Answer : Answer: Marks to all

Which of the following condition is usedto transmit two packets overa medium at the same time? A. Contention B. Collision C. Synchronous D. Asynchronous E. None of the above

Description : Which of the following condition is usedto transmit two packets overa medium at the same time? A. Contention B. Collision C. Synchronous D. Asynchronous E. None of the above

Last Answer : Collision

Avalanche photodiode receivers candetect hits of transmitted databy receiving A. 100 photons B. 200 photons C. 300 photons D. 400 photons E. None of the above

Description : Avalanche photodiode receivers candetect hits of transmitted databy receiving A. 100 photons B. 200 photons C. 300 photons D. 400 photons E. None of the above

Last Answer : 200 photons

In IPv6, the _______ field inthe baseheader and thesender IP address combineto indicate aunique path identifier for aspecific flow of data. A) flow label B) nextheader C) hoplimit D) destination IP address

Description : In IPv6, the _______ field inthe baseheader and thesender IP address combineto indicate aunique path identifier for aspecific flow of data. A) flow label B) nextheader C) hoplimit D) destination IP address

Last Answer : flow label

When internet data leaves your campus, it normallygoes toa(n) ______ before moving towardits destination. A) Internet backbone B) Networkaccesspoint C) Base station D) Communication system

Description : When internet data leaves your campus, it normallygoes toa(n) ______ before moving towardits destination. A) Internet backbone B) Networkaccesspoint C) Base station D) Communication system

Last Answer : Networkaccesspoint