The ratio of inertial forces to viscous forces is called the __________ number. (A) Weber (B) Mach (C) Froude (D) Reynold

The ratio of inertial forces to viscous forces is called the __________
number.
(A) Weber
(B) Mach
(C) Froude
(D) Reynold
by

1 Answer

Answer :

(D) Reynold
by

Related questions

The ratio of pressure forces to inertial forces is called the __________ number. (A) Froude (B) Euler (C) Reynold (D) Mach

Description : The ratio of pressure forces to inertial forces is called the __________ number. (A) Froude (B) Euler (C) Reynold (D) Mach

Last Answer : (B) Euler

The ratio of inertial forces to gravity forces is called the __________ number. (A) Mach (B) Froude (C) Euler (D) Weber

Description : The ratio of inertial forces to gravity forces is called the __________ number. (A) Mach (B) Froude (C) Euler (D) Weber

Last Answer : (B) Froude

Ratio of inertial forces to surface tension forces is called the __________ number. (A) Euler (B) Froude (C) Mach (D) Weber

Description : Ratio of inertial forces to surface tension forces is called the __________ number. (A) Euler (B) Froude (C) Mach (D) Weber

Last Answer : (D) Weber

The ratio of inertial forces to elastic forces is called the __________ number. (A) Reynolds (B) Mach (C) Euler (D) Weber

Description : The ratio of inertial forces to elastic forces is called the __________ number. (A) Reynolds (B) Mach (C) Euler (D) Weber

Last Answer : (B) Mach

The ratio of inertial forces to elastic forces is called the __________ number. (A) Reynolds (B) Mach (C) Euler (D) Weber

Description : The ratio of inertial forces to elastic forces is called the __________ number. (A) Reynolds (B) Mach (C) Euler (D) Weber

Last Answer : (B) Mach

Ratio of pressure and inertia force gives __________ number. (A) Weber (B) Mach (C) Euler (D) Froude

Description : Ratio of pressure and inertia force gives __________ number. (A) Weber (B) Mach (C) Euler (D) Froude

Last Answer : (C) Euler

__________ number determines whether the fluid flow in an open channel is supercritical, critical or sub-critical. (A) Mach (B) Reynolds (C) Froude (D) Weber

Description : __________ number determines whether the fluid flow in an open channel is supercritical, critical or sub-critical. (A) Mach (B) Reynolds (C) Froude (D) Weber

Last Answer : (C) Froude

Weber number is the ratio of inertial force to __________ force. (A) Surface tension (B) Gravity (C) Viscous (D) Elastic

Description : Weber number is the ratio of inertial force to __________ force. (A) Surface tension (B) Gravity (C) Viscous (D) Elastic

Last Answer : (A) Surface tension

The molecular number density of an ideal gas at standard temperature and pressure in cm3  a. Froude number  b. Loschmidt number  c. Mach number  d. Reynold number

Description : The molecular number density of an ideal gas at standard temperature and pressure in cm3  a. Froude number  b. Loschmidt number  c. Mach number  d. Reynold number

Last Answer : Loschmidt number

Pressure co-efficient is the ratio of pressure forces to __________ forces. (A) Gravity (B) Inertial (C) Viscous (D) None of these

Description : Pressure co-efficient is the ratio of pressure forces to __________ forces. (A) Gravity (B) Inertial (C) Viscous (D) None of these

Last Answer : (B) Inertial

The pressure co-efficient is the ratio of pressure forces to __________ forces. (A) Viscous (B) Inertial (C) Gravity (D) Surface tension

Description : The pressure co-efficient is the ratio of pressure forces to __________ forces. (A) Viscous (B) Inertial (C) Gravity (D) Surface tension

Last Answer : (A) Viscous

Reynolds number is the ratio of (A) Viscous forces to gravity forces (B) Inertial forces to viscous forces (C) Viscous forces to inertial forces (D) Inertial forces to gravity forces

Description : Reynolds number is the ratio of (A) Viscous forces to gravity forces (B) Inertial forces to viscous forces (C) Viscous forces to inertial forces (D) Inertial forces to gravity forces

Last Answer : (B) Inertial forces to viscous forces

Mach number is important in a fluid flow problem, when the inertia and __________ forces predominate. (A) Elastic (B) Viscous (C) Gravity (D) None of these

Description : Mach number is important in a fluid flow problem, when the inertia and __________ forces predominate. (A) Elastic (B) Viscous (C) Gravity (D) None of these

Last Answer : (A) Elastic

Mach number is important in a fluid flow problem, when the inertia and __________ forces predominate. (A) Elastic (B) Viscous (C) Gravity (D) None of these

Description : Mach number is important in a fluid flow problem, when the inertia and __________ forces predominate. (A) Elastic (B) Viscous (C) Gravity (D) None of these

Last Answer : A) Elastic

Froude number is the ratio of (A) Shear stress to gravitational stress (B) Drag stress to shear stress (C) Inertial stress to shear stress (D) Inertial stress to gravitational stress

Description : Froude number is the ratio of (A) Shear stress to gravitational stress (B) Drag stress to shear stress (C) Inertial stress to shear stress (D) Inertial stress to gravitational stress

Last Answer : (D) Inertial stress to gravitational stress

At low Reynolds number (A) Viscous forces are unimportant (B) Viscous forces control (C) Viscous forces control and inertial forces are unimportant (D) Gravity forces contro

Description : At low Reynolds number (A) Viscous forces are unimportant (B) Viscous forces control (C) Viscous forces control and inertial forces are unimportant (D) Gravity forces contro

Last Answer : (C) Viscous forces control and inertial forces are unimportant

A spherical particle is falling slow in a viscous liquid such that Reynolds number is less than 1. Which statement is correct for this situation? (A) Inertial and drag forces are important (B) Drag, gravitational and buoyancy forces are important (C) Drag force and gravitational forces are important (D) None of the above

Description : A spherical particle is falling slow in a viscous liquid such that Reynolds number is less than 1. Which statement is correct for this situation? (A) Inertial and drag forces are important (B) Drag ... forces are important (C) Drag force and gravitational forces are important (D) None of the above

Last Answer : (B) Drag, gravitational and buoyancy forces are important

At high Reynolds number (A) Inertial forces control and viscous forces are unimportant (B) Viscous forces predominate (C) Inertial forces are unimportant and viscous forces control (D) None of these

Description : At high Reynolds number (A) Inertial forces control and viscous forces are unimportant (B) Viscous forces predominate (C) Inertial forces are unimportant and viscous forces control (D) None of these

Last Answer : (A) Inertial forces control and viscous forces are unimportant

Ratio of inertia force to elastic force is known as (A) Mach number (B) Froude number (C) Reynolds number (D) Weber's number

Description : Ratio of inertia force to elastic force is known as (A) Mach number (B) Froude number (C) Reynolds number (D) Weber's number

Last Answer : Answer: Option A

Ratio of inertia force to surface Jension is known as (A) Mach number (B) Froude number (C) (D) Weber's number

Description : Ratio of inertia force to surface Jension is known as (A) Mach number (B) Froude number (C) (D) Weber's number

Last Answer : Answer: Option D

Which of the following is not concerned with the fluid-particle interaction? (A) Drag co-efficient (B) Froude number (C) Galileo number (D) Weber number

Description : Which of the following is not concerned with the fluid-particle interaction? (A) Drag co-efficient (B) Froude number (C) Galileo number (D) Weber number

Last Answer : (D) Weber number

Which of the following is not a dimension-less parameter? (A) Pressure-co-efficient (B) Froude number (C) Kinematic viscosity (D) Weber number

Description : Which of the following is not a dimension-less parameter? (A) Pressure-co-efficient (B) Froude number (C) Kinematic viscosity (D) Weber number

Last Answer : (C) Kinematic viscosity

The co-efficient of drag and lift for an incompressible fluid depends on the (A) Reynolds number (B) Froude number (C) Mach number (D) All (A), (B) and (C)

Description : The co-efficient of drag and lift for an incompressible fluid depends on the (A) Reynolds number (B) Froude number (C) Mach number (D) All (A), (B) and (C)

Last Answer : (A) Reynolds numbe

Cp /Cv is termed as (A) Adiabatic constant (B) Mach number (C) Weber number (D) Prandtl number

Description : Cp /Cv is termed as (A) Adiabatic constant (B) Mach number (C) Weber number (D) Prandtl number

Last Answer : (A) Adiabatic constan

Which of the following denotes the effect of compressibility in fluid flow? (A) Weber number (B) Mach number (C) Euler number (D) Reynolds number

Description : Which of the following denotes the effect of compressibility in fluid flow? (A) Weber number (B) Mach number (C) Euler number (D) Reynolds number

Last Answer : (B) Mach numbe

The loss of head due to friction in a pipe of uniform diameter in which a viscous flow is taking place, is (where RN = Reynold number) (A) 1/RN (B) 4/RN (C) 16/RN (D) 64/RN

Description : The loss of head due to friction in a pipe of uniform diameter in which a viscous flow is taking place, is (where RN = Reynold number) (A) 1/RN (B) 4/RN (C) 16/RN (D) 64/RN

Last Answer : Answer: Option C

Euler's dimensionless number relates the following (A) Inertial force and gravity (B) Viscous force and inertial force (C) Viscous force and buoyancy force (D) Pressure force and inertial force

Description : Euler's dimensionless number relates the following (A) Inertial force and gravity (B) Viscous force and inertial force (C) Viscous force and buoyancy force (D) Pressure force and inertial force

Last Answer : Answer: Option D

Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

At low Reynold's number, the power (P) required for agitating a fluid in a stirred tank becomes independent of inertial forces. In this limit, indicate which of the following relations is satisfied: Po = ρ/ρN3 D5 : Power number Re = ρ N D2 /μ: Reynold's number N is the impeller rotational speed, and D is the impeller diameter. (A) Po ∝ Re -1.0 (B) Po ∝ Re 0.0 (C) Po ∝ Re 0.5 (D) Po ∝ Re 1.0

Description : At low Reynold's number, the power (P) required for agitating a fluid in a stirred tank becomes independent of inertial forces. In this limit, indicate which of the following relations is satisfied: Po = ρ/ρN3 D5 : Power number Re = ρ N D2 ... Re -1.0 (B) Po ∝ Re 0.0 (C) Po ∝ Re 0.5 (D) Po ∝ Re 1.0

Last Answer : (B) Po ∝ Re 0.0 (C) Po ∝ Re 0.5

Froude number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion through two fluids where there is a surface of discontinuity, gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Description : Froude number is significant in (A) Supersonics, as with projectile and jet propulsion (B) Full immersion or completely enclosed flow, as with pipes, aircraft wings, nozzles etc. (C) Simultaneous motion ... gravity forces, and wave making effect, as with ship's hulls (D) All of the above

Last Answer : Answer: Option C

Forces acting on a particle settling in fluid are __________ forces. (A) Gravitational & buoyant (B) Centrifugal & drag (C) Gravitational or centrifugal buoyant drag (D) External, drag & viscous

Description : Forces acting on a particle settling in fluid are __________ forces. (A) Gravitational & buoyant (B) Centrifugal & drag (C) Gravitational or centrifugal buoyant drag (D) External, drag & viscous

Last Answer : (C) Gravitational or centrifugal buoyant drag

The equation relating friction factor to Reynold number, f -0.5 = 4 loge (NRe /√f) -0.4 , is called the __________ equation. (A) Nikuradse (B) Von-Karman

Description : The equation relating friction factor to Reynold number, f -0.5 = 4 loge (NRe /√f) -0.4 , is called the __________ equation. (A) Nikuradse (B) Von-Karman

Last Answer : (B) Ergun's

The two important forces for a floating body are (A) Buoyancy, gravity(B) Buoyancy, pressure (C) Buoyancy, inertial (D) Inertial, gravity

Description : The two important forces for a floating body are (A) Buoyancy, gravity (B) Buoyancy, pressure (C) Buoyancy, inertial (D) Inertial, gravity

Last Answer : Answer: Option A

The important dimensional group involved in the power requirement calculation in mixing operation is the __________ number. (A) Reynold's (B) Froude (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The important dimensional group involved in the power requirement calculation in mixing operation is the __________ number. (A) Reynold's (B) Froude (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

02. The ratio of the inertia force to the gravity force is called Froude number. A) Agree B) Disagree

Description : 02. The ratio of the inertia force to the gravity force is called Froude number. A) Agree B) Disagree

Last Answer : A

Power number is the ratio of (A) Drag stress to inertial stress (B) Inertial stress to drag stress (C) Inertial stress to gravitational stress (D) Gravitational stress to drag stress

Description : Power number is the ratio of (A) Drag stress to inertial stress (B) Inertial stress to drag stress (C) Inertial stress to gravitational stress (D) Gravitational stress to drag stress

Last Answer : (A) Drag stress to inertial stress

Euler number is defined as the ratio of inertia force to __________ force. (A) Pressure (B) Elastic (C) Gravity (D) Viscous

Description : Euler number is defined as the ratio of inertia force to __________ force. (A) Pressure (B) Elastic (C) Gravity (D) Viscous

Last Answer : (A) Pressure

Which of the following fluid forces are not considered in the Navier￾Stoke's equation? (A) Gravity forces (B) Viscous forces (C) Pressure forces (D) Turbulent forces

Description : Which of the following fluid forces are not considered in the Navier￾Stoke's equation? (A) Gravity forces (B) Viscous forces (C) Pressure forces (D) Turbulent forces

Last Answer : (D) Turbulent forces

Which of the fluid forces are not considered in the Reynold's equation of flow? (A) Viscous forces (B) Turbulent forces (C) Pressure forces (D) Compressibility forces

Description : Which of the fluid forces are not considered in the Reynold's equation of flow? (A) Viscous forces (B) Turbulent forces (C) Pressure forces (D) Compressibility forces

Last Answer : (D) Compressibility forces

Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocity(B) Newton's law of viscosity is not applicable to the turbulent flow of fluidwith linear velocity distribution(C) Laminar flow of viscous liquids is involved in the lubrication of varioustypes of bearings(D) Rise of water in capillary tubes reduces with the increasing diameter ofcapillary tubes

Description : Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocit (B) Newton's law of viscosity is not applicable to the ... types of bearings (D) Rise of water in capillary tubes reduces with the increasing diameter of capillary tubes

Last Answer : (B) Newton's law of viscosity is not applicable to the turbulent flow of fluid with linear velocity distribution

Which of the following forces does not act on a fluid at rest? (A) Viscous force (B) Gravity force (C) Hydrostatic force (D) Surface tension force

Description : Which of the following forces does not act on a fluid at rest? (A) Viscous force (B) Gravity force (C) Hydrostatic force (D) Surface tension force

Last Answer : (A) Viscous force

Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the total volume to the volume of voids in the bed (C) Mach number in an incompressible fluid is always unity (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Description : Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the ... the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Last Answer : (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Mach number is defined as the ratio of the local flow velocity to the sonic velocity in the fluid. For what value of Mach number, the gases are considered incompressible? (A) < 0.3 (B) > 3 (C) 50 (D) 1

Description : Mach number is defined as the ratio of the local flow velocity to the sonic velocity in the fluid. For what value of Mach number, the gases are considered incompressible? (A) < 0.3 (B) > 3 (C) 50 (D) 1

Last Answer : (A) < 0.3

Mach number is the ratio of the speed of the (A) Fluid to that of the light (B) Light to that of the fluid (C) Fluid to that of the sound (D) Sound to that of the fluid

Description : Mach number is the ratio of the speed of the (A) Fluid to that of the light (B) Light to that of the fluid (C) Fluid to that of the sound (D) Sound to that of the fluid

Last Answer : (C) Fluid to that of the sound

In a mixer, the quantity, (v. L/D) is termed as __________ number (where, v = longitudinal velocity of material, L = length of the mixer, D = diffusivity in axial mixing). (A) Weber (B) Peclet (C) Brinkman (D) Schmidt

Description : In a mixer, the quantity, (v. L/D) is termed as __________ number (where, v = longitudinal velocity of material, L = length of the mixer, D = diffusivity in axial mixing). (A) Weber (B) Peclet (C) Brinkman (D) Schmidt

Last Answer : (B) Peclet

The ratio of the inertia force to the __________ is called Euler's number. (A) Pressure force (B) Elastic force (C) Surface tension force (D) Viscous force

Description : The ratio of the inertia force to the __________ is called Euler's number. (A) Pressure force (B) Elastic force (C) Surface tension force (D) Viscous force

Last Answer : Answer: Option A

For a given Reynold number as d/D for an orifice increases, Cd will (where, d & D are orifice & pipe diameters respectively). (A) Increase (B) Decrease (C) Remain constant (D) Either (A) or (B); depends on other factors

Description : For a given Reynold number as d/D for an orifice increases, Cd will (where, d & D are orifice & pipe diameters respectively). (A) Increase (B) Decrease (C) Remain constant (D) Either (A) or (B); depends on other factors

Last Answer : (A) Increase

Which of the following quantities are computed by using the hydraulic radius for non-circular ducts? (A) Velocity and relative roughness (B) Head loss and velocity (C) Reynold number, relative roughness and head loss (D) Reynolds number and friction factor

Description : Which of the following quantities are computed by using the hydraulic radius for non-circular ducts? (A) Velocity and relative roughness (B) Head loss and velocity (C) Reynold number, relative roughness and head loss (D) Reynolds number and friction factor

Last Answer : (C) Reynold number, relative roughness and head loss

In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said to have the same hydraulic roughness, when they have equal values of (A) Relative roughness (B) Absolute roughness (C) Friction co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Description : In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said ... co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Last Answer : (C) Friction co-efficient for flows at equal Reynold number

The ratio of the inertial mass to gravitational mass is equal to which number? -Do You Know?

Description : The ratio of the inertial mass to gravitational mass is equal to which number? -Do You Know?

Last Answer : answer: