Which of the following is not a dimension-less parameter? (A) Pressure-co-efficient (B) Froude number (C) Kinematic viscosity (D) Weber number

Which of the following is not a dimension-less parameter?
(A) Pressure-co-efficient
(B) Froude number
(C) Kinematic viscosity
(D) Weber number
by

1 Answer

Answer :

(C) Kinematic viscosity
by

Related questions

Which of the following is not dimension-less? (A) Froude number (B) Kinematic viscosity (C) Pressure co-efficient (D) None of these

Description : Which of the following is not dimension-less? (A) Froude number (B) Kinematic viscosity (C) Pressure co-efficient (D) None of these

Last Answer : (B) Kinematic viscosity

Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Description : Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Last Answer : (A) Mass transfer co-efficient

Which of the following is not concerned with the fluid-particle interaction? (A) Drag co-efficient (B) Froude number (C) Galileo number (D) Weber number

Description : Which of the following is not concerned with the fluid-particle interaction? (A) Drag co-efficient (B) Froude number (C) Galileo number (D) Weber number

Last Answer : (D) Weber number

Dimension of mass diffusivity is the same as that of (A) Kinematic viscosity (B) Dynamic viscosity (C) Surface tension (D) Pressure

Description : Dimension of mass diffusivity is the same as that of (A) Kinematic viscosity (B) Dynamic viscosity (C) Surface tension (D) Pressure

Last Answer : (A) Kinematic viscosity

The drag co-efficient for a bacterium moving in water at 1 mm/s, will be of the following order of magnitude (assume size of the bacterium to be 1 micron and kinematic viscosity of water to be 10 -6m2 /s). (A) 24000 (B) 24 (C) 0.24(D) 0.44

Description : The drag co-efficient for a bacterium moving in water at 1 mm/s, will be of the following order of magnitude (assume size of the bacterium to be 1 micron and kinematic viscosity of water to be 10 -6m2 /s). (A) 24000 (B) 24 (C) 0.24(D) 0.44

Last Answer : (D) 0.44

The co-efficient of performance (COP) of a refrigerating system, which is its index of performance, is defined as the ratio of useful refrigeration to the net work. The units of __________ and COP are the same. (A) Kinematic viscosity (B) Work (C) Temperature (D) None of these

Description : The co-efficient of performance (COP) of a refrigerating system, which is its index of performance, is defined as the ratio of useful refrigeration to the net work. The units of __________ and COP are the same. (A) Kinematic viscosity (B) Work (C) Temperature (D) None of these

Last Answer : (D) None of these

Ratio of pressure and inertia force gives __________ number. (A) Weber (B) Mach (C) Euler (D) Froude

Description : Ratio of pressure and inertia force gives __________ number. (A) Weber (B) Mach (C) Euler (D) Froude

Last Answer : (C) Euler

The dimension of diffusivity is same as that of the (A) Density (B) Molal concentration (C) Kinematic viscosity (D) Velocity head

Description : The dimension of diffusivity is same as that of the (A) Density (B) Molal concentration (C) Kinematic viscosity (D) Velocity head

Last Answer : (C) Kinematic viscosity

Which of the following has the same dimension as mass diffusivity? (A) Momentum flux (B) Kinematic viscosity (C) Thermal diffusivity (D) Both (B) and (C)

Description : Which of the following has the same dimension as mass diffusivity? (A) Momentum flux (B) Kinematic viscosity (C) Thermal diffusivity (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

The dimension of kinematic viscosity is(A) ML -2T -1 (B) L 2T -1 (C) ML -2T -2 (D) None of these

Description : The dimension of kinematic viscosity is (A) ML -2T -1 (B) L 2T -1 (C) ML -2T -2 (D) None of these

Last Answer : (B) L 2T -1

Which of the following is a dimensionless parameter? (A) Angular velocity (B) Specific weight (C) Kinematic viscosity (D) None of these

Description : Which of the following is a dimensionless parameter? (A) Angular velocity (B) Specific weight (C) Kinematic viscosity (D) None of these

Last Answer : (D) None of these

The ratio of inertial forces to gravity forces is called the __________ number. (A) Mach (B) Froude (C) Euler (D) Weber

Description : The ratio of inertial forces to gravity forces is called the __________ number. (A) Mach (B) Froude (C) Euler (D) Weber

Last Answer : (B) Froude

Ratio of inertial forces to surface tension forces is called the __________ number. (A) Euler (B) Froude (C) Mach (D) Weber

Description : Ratio of inertial forces to surface tension forces is called the __________ number. (A) Euler (B) Froude (C) Mach (D) Weber

Last Answer : (D) Weber

The ratio of inertial forces to viscous forces is called the __________ number. (A) Weber (B) Mach (C) Froude (D) Reynold

Description : The ratio of inertial forces to viscous forces is called the __________ number. (A) Weber (B) Mach (C) Froude (D) Reynold

Last Answer : (D) Reynold

__________ number determines whether the fluid flow in an open channel is supercritical, critical or sub-critical. (A) Mach (B) Reynolds (C) Froude (D) Weber

Description : __________ number determines whether the fluid flow in an open channel is supercritical, critical or sub-critical. (A) Mach (B) Reynolds (C) Froude (D) Weber

Last Answer : (C) Froude

The co-efficient of drag and lift for an incompressible fluid depends on the (A) Reynolds number (B) Froude number (C) Mach number (D) All (A), (B) and (C)

Description : The co-efficient of drag and lift for an incompressible fluid depends on the (A) Reynolds number (B) Froude number (C) Mach number (D) All (A), (B) and (C)

Last Answer : (A) Reynolds numbe

Which of the following is not a dimension-less group used in catalysis? (Where, D = dispersion co-efficient, cm2 /sec.D1 = diffusion co-efficient; cm2 /sec L = length of the reactor, cm t = time, sec, v = volumetric flow rate, cm3 /sec. V = volume, cm3 .) (A) Reactor dispersion number (D/vL) (B) Reduced time (vt/V) (C) Thiele modulus L √(k/D1 ) (D) None of these

Description : Which of the following is not a dimension-less group used in catalysis? (Where, D = dispersion co-efficient, cm2 /sec.D1 = diffusion co-efficient; cm2 /sec L = length of the reactor, cm t = time, sec, v = volumetric ... (D/vL) (B) Reduced time (vt/V) (C) Thiele modulus L √(k/D1 ) (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Which of the following is not a dimension-less parameter? (A) Euler number (B) Specific gravity (C) Fanning friction factor (D) None of these

Description : Which of the following is not a dimension-less parameter? (A) Euler number (B) Specific gravity (C) Fanning friction factor (D) None of these

Last Answer : (D) None of these

. Boiling point elevation for a strong and concentrated solution is found by Duhring's rule, which states that at the same pressure, the boiling point of a solution is a linear function of the __________ of pure water. (A) Boiling point (B) Dynamic viscosity (C) Kinematic viscosity (D) Density

Description : . Boiling point elevation for a strong and concentrated solution is found by Duhring's rule, which states that at the same pressure, the boiling point of a solution is a linear function of the __________ of pure water. (A) Boiling point (B) Dynamic viscosity (C) Kinematic viscosity (D) Density

Last Answer : (A) Boiling point

Nusselt number/Biot number varies (A) Inversely with thermal conductivity (B) Directly with heat transfer co-efficient (C) Directly with thermal conductivity (D) Inversely with the dimension of the solid

Description : Nusselt number/Biot number varies (A) Inversely with thermal conductivity (B) Directly with heat transfer co-efficient (C) Directly with thermal conductivity (D) Inversely with the dimension of the solid

Last Answer : (A) Inversely with thermal conductivity

Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Description : Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Last Answer : (B) High vapour pressure

Kinematic viscosity is dependent upon (A) Pressure (B) Distance (C) Density (D) Flow

Description : Kinematic viscosity is dependent upon (A) Pressure (B) Distance (C) Density (D) Flow

Last Answer : Answer: Option C

The ratio of kinematic viscosity to thermal diffusivity is called the __________ number. (A) Peclet (B) Prandtl (C) Stanton (D) Nusselt

Description : The ratio of kinematic viscosity to thermal diffusivity is called the __________ number. (A) Peclet (B) Prandtl (C) Stanton (D) Nusselt

Last Answer : (B) Prandtl

. One stoke (unit of kinematic viscosity) is equivalent to (A) 1 cm2 /second (B) 1 m2 /second (C) 1 gm/cm. second (D) 1 kg. m/second

Description : . One stoke (unit of kinematic viscosity) is equivalent to (A) 1 cm2 /second (B) 1 m2 /second (C) 1 gm/cm. second (D) 1 kg. m/second

Last Answer : (A) 1 cm2 /second

N. second/m2 is (A) The S.I. unit of dynamic viscosity (B) The S.I. unit of kinematic viscosity (C) Equivalent to one poise (D) Equivalent to one stoke

Description : N. second/m2 is (A) The S.I. unit of dynamic viscosity (B) The S.I. unit of kinematic viscosity (C) Equivalent to one poise (D) Equivalent to one stoke

Last Answer : (A) The S.I. unit of dynamic viscosity

The kinematic viscosity (in stoke) and the absolute/dynamic viscosity (in poise) are the same for __________ at room temperature. (A) Air (B) Water (C) Mercury (D) Alcohol

Description : The kinematic viscosity (in stoke) and the absolute/dynamic viscosity (in poise) are the same for __________ at room temperature. (A) Air (B) Water (C) Mercury (D) Alcohol

Last Answer : (B) Water

Double pipe heat exchangers are preferably useful, when (A) High viscosity liquid is to be cooled (B) Requirement of heat transfer area is low (C) Overall heat transfer co-efficient is very high (D) A corrosive liquid is to be heated

Description : Double pipe heat exchangers are preferably useful, when (A) High viscosity liquid is to be cooled (B) Requirement of heat transfer area is low (C) Overall heat transfer co-efficient is very high (D) A corrosive liquid is to be heated

Last Answer : (B) Requirement of heat transfer area is low

Heat transfer by natural convection is enhanced in system with (A) High viscosity (B) High co-efficient of thermal expansio

Description : Heat transfer by natural convection is enhanced in system with (A) High viscosity (B) High co-efficient of thermal expansio

Last Answer : (B) High co-efficient of thermal expansion

The film co-efficient between condensing vapour and metal wall increases with (A) Increasing temperature of the vapour (B) Decreasing temperature of the vapour (C) Increasing viscosity of the film of condensate (D) Increasing temperature drop

Description : The film co-efficient between condensing vapour and metal wall increases with (A) Increasing temperature of the vapour (B) Decreasing temperature of the vapour (C) Increasing viscosity of the film of condensate (D) Increasing temperature drop

Last Answer : (A) Increasing temperature of the vapour

Newton's law of viscosity, which states that the shear stress is proportional to the __________ Co-efficient of viscosity is called dynamic or absolute viscosity(where, V = velocity, Vg = velocity gradient). (A) V2 (B) 1/V2 (C) 1/Vg (D) Vg

Description : Newton's law of viscosity, which states that the shear stress is proportional to the __________ Co-efficient of viscosity is called dynamic or absolute viscosity(where, V = velocity, Vg = velocity gradient). (A) V2 (B) 1/V2 (C) 1/Vg (D) Vg

Last Answer : Option D

Air standard Otto cycle is more efficient than the diesel cycle for the same (A) Heat addition & compression ratio (B) Heat addition & pressure (C) Compression ratio & pressure (D) Cylinder dimension & rpm

Description : Air standard Otto cycle is more efficient than the diesel cycle for the same (A) Heat addition & compression ratio (B) Heat addition & pressure (C) Compression ratio & pressure (D) Cylinder dimension & rpm

Last Answer : (A) Heat addition & compression ratio

12. Kinematic viscosity is the product of dynamic viscosity and the density of the liquid. A) Yes B) No

Description : 12. Kinematic viscosity is the product of dynamic viscosity and the density of the liquid. A) Yes B) No

Last Answer : B

The unit of kinematic viscosity in S. I. units is (A) N-m/s (B) N-s/m2 (C) m 2 /s (D) N-m

Description : The unit of kinematic viscosity in S. I. units is (A) N-m/s (B) N-s/m2 (C) m 2 /s (D) N-m

Last Answer : Answer: Option C

Which of the following is the unit of kinematic viscosity? (A) Pascal (B) Poise (C) Stoke (D) Faraday

Description : Which of the following is the unit of kinematic viscosity? (A) Pascal (B) Poise (C) Stoke (D) Faraday

Last Answer : Answer: Option C

Kinematic viscosity is equal to (A) Dynamic viscosity/density (B) Dynamic viscosity × density (C) Density/dynamic viscosity (D) 1/dynamic viscosity × density

Description : Kinematic viscosity is equal to (A) Dynamic viscosity/density (B) Dynamic viscosity × density (C) Density/dynamic viscosity (D) 1/dynamic viscosity × density

Last Answer : Answer: Option A

The units of kinematic viscosity are (A) Metres² per sec (B) kg sec/metre (C) Newton-sec per metre (D) Newton-sec per metre

Description : The units of kinematic viscosity are (A) Metres² per sec (B) kg sec/metre (C) Newton-sec per metre (D) Newton-sec per metre

Last Answer : Answer: Option A

Choose the correct relationship (A) Specific gravity = gravity × density (B) Dynamic viscosity = kinematic viscosity × density (C) Gravity = specific gravity × density (D) Kinematic viscosity = dynamic viscosity × density

Description : Choose the correct relationship (A) Specific gravity = gravity × density (B) Dynamic viscosity = kinematic viscosity × density (C) Gravity = specific gravity × density (D) Kinematic viscosity = dynamic viscosity × density

Last Answer : Answer: Option B

The kinematic viscosity is the (A) Ratio of absolute viscosity to the density of the liquid (B) Ratio of density of the liquid to the absolute viscosity (C) Product of absolute viscosity and density of the liquid (D) Product of absolute viscosity and mass of the liquid

Description : The kinematic viscosity is the (A) Ratio of absolute viscosity to the density of the liquid (B) Ratio of density of the liquid to the absolute viscosity (C) Product of absolute viscosity and density of the liquid (D) Product of absolute viscosity and mass of the liquid

Last Answer : Answer: Option A

The ratio of absolute viscosity to mass density is known as (A) Specific viscosity (B) Viscosity index (C) Kinematic viscosity (D) Coefficient of viscosity

Description : The ratio of absolute viscosity to mass density is known as (A) Specific viscosity (B) Viscosity index (C) Kinematic viscosity (D) Coefficient of viscosity

Last Answer : Answer: Option C

The kinematic viscosity of an oil (in stokes) whose specific gravity is 0.95 and viscosity 0.011 poise, is (A) 0.0116 stoke (B) 0.116 stoke (C) 0.0611 stoke (D) 0.611 stoke

Description : The kinematic viscosity of an oil (in stokes) whose specific gravity is 0.95 and viscosity 0.011 poise, is (A) 0.0116 stoke (B) 0.116 stoke (C) 0.0611 stoke (D) 0.611 stoke

Last Answer : Answer: Option A

Stoke is the unit of (A) Kinematic viscosity in C. G. S. units (B) Kinematic viscosity in M. K. S. units (C) Dynamic viscosity in M. K. S. units (D) Dynamic viscosity in S. I. units

Description : Stoke is the unit of (A) Kinematic viscosity in C. G. S. units (B) Kinematic viscosity in M. K. S. units (C) Dynamic viscosity in M. K. S. units (D) Dynamic viscosity in S. I. units

Last Answer : Answer: Option A

What Is Kinematic Viscosity?

Description : What Is Kinematic Viscosity?

Last Answer : The kinematic viscosity is the ratio of absolute viscosity to the density of the liquid.

Which parameter is used for the grading of paraffin waxes? (A) Specific gravity (B) Melting point (C) Viscosity (D) Penetration number

Description : Which parameter is used for the grading of paraffin waxes? (A) Specific gravity (B) Melting point (C) Viscosity (D) Penetration number

Last Answer : (C) Viscosity

The ratio of pressure forces to inertial forces is called the __________ number. (A) Froude (B) Euler (C) Reynold (D) Mach

Description : The ratio of pressure forces to inertial forces is called the __________ number. (A) Froude (B) Euler (C) Reynold (D) Mach

Last Answer : (B) Euler

Which one of the following is a nondimensional quantity? (1) Gas constant (2) Strain (3) Co-efficient of viscosity (4) Plank's constant

Description : Which one of the following is a nondimensional quantity? (1) Gas constant (2) Strain (3) Co-efficient of viscosity (4) Plank's constant

Last Answer : (2) Strain Explanation: A dimensionless quantity is simply a quantity that has no units and therefore no dimensions. A ratio between two numbers is a non-dimensional or dimensionless quantity. ... in dimension over original dimension has no dimensional formula. So it is a. dimensionless quantity.

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

Extremely large or small volumes of fluids are generally best routed through the shell side of a shell and tube heat exchanger, because of the (A) Less corrosion problems (B) Flexibility possible in the baffle arrangement (C) Low pressure drop (D) High heat transfer co-efficient

Description : Extremely large or small volumes of fluids are generally best routed through the shell side of a shell and tube heat exchanger, because of the (A) Less corrosion problems (B) Flexibility possible in the baffle arrangement (C) Low pressure drop (D) High heat transfer co-efficient

Last Answer : (B) Flexibility possible in the baffle arrangement

In a shell and tube heat exchanger, floating head is used for (A) Large temperature differentials (B) High heat transfer co-efficient (C) Low pressure drop (D) Less corrosion of tubes

Description : In a shell and tube heat exchanger, floating head is used for (A) Large temperature differentials (B) High heat transfer co-efficient (C) Low pressure drop (D) Less corrosion of tubes

Last Answer : (A) Large temperature differentials

The molecular number density of an ideal gas at standard temperature and pressure in cm3  a. Froude number  b. Loschmidt number  c. Mach number  d. Reynold number

Description : The molecular number density of an ideal gas at standard temperature and pressure in cm3  a. Froude number  b. Loschmidt number  c. Mach number  d. Reynold number

Last Answer : Loschmidt number