__________ number determines whether the fluid flow in an open channel is supercritical, critical or sub-critical. (A) Mach (B) Reynolds (C) Froude (D) Weber

__________ number determines whether the fluid flow in an open channel is supercritical, critical or sub-critical.
(A) Mach
(B) Reynolds
(C) Froude
(D) Weber
by

1 Answer

Answer :

(C) Froude
by

Related questions

Which of the following denotes the effect of compressibility in fluid flow? (A) Weber number (B) Mach number (C) Euler number (D) Reynolds number

Description : Which of the following denotes the effect of compressibility in fluid flow? (A) Weber number (B) Mach number (C) Euler number (D) Reynolds number

Last Answer : (B) Mach numbe

The co-efficient of drag and lift for an incompressible fluid depends on the (A) Reynolds number (B) Froude number (C) Mach number (D) All (A), (B) and (C)

Description : The co-efficient of drag and lift for an incompressible fluid depends on the (A) Reynolds number (B) Froude number (C) Mach number (D) All (A), (B) and (C)

Last Answer : (A) Reynolds numbe

The ratio of inertial forces to gravity forces is called the __________ number. (A) Mach (B) Froude (C) Euler (D) Weber

Description : The ratio of inertial forces to gravity forces is called the __________ number. (A) Mach (B) Froude (C) Euler (D) Weber

Last Answer : (B) Froude

Ratio of pressure and inertia force gives __________ number. (A) Weber (B) Mach (C) Euler (D) Froude

Description : Ratio of pressure and inertia force gives __________ number. (A) Weber (B) Mach (C) Euler (D) Froude

Last Answer : (C) Euler

Ratio of inertial forces to surface tension forces is called the __________ number. (A) Euler (B) Froude (C) Mach (D) Weber

Description : Ratio of inertial forces to surface tension forces is called the __________ number. (A) Euler (B) Froude (C) Mach (D) Weber

Last Answer : (D) Weber

The ratio of inertial forces to viscous forces is called the __________ number. (A) Weber (B) Mach (C) Froude (D) Reynold

Description : The ratio of inertial forces to viscous forces is called the __________ number. (A) Weber (B) Mach (C) Froude (D) Reynold

Last Answer : (D) Reynold

The ratio of inertial forces to elastic forces is called the __________ number. (A) Reynolds (B) Mach (C) Euler (D) Weber

Description : The ratio of inertial forces to elastic forces is called the __________ number. (A) Reynolds (B) Mach (C) Euler (D) Weber

Last Answer : (B) Mach

The ratio of inertial forces to elastic forces is called the __________ number. (A) Reynolds (B) Mach (C) Euler (D) Weber

Description : The ratio of inertial forces to elastic forces is called the __________ number. (A) Reynolds (B) Mach (C) Euler (D) Weber

Last Answer : (B) Mach

Ratio of inertia force to elastic force is known as (A) Mach number (B) Froude number (C) Reynolds number (D) Weber's number

Description : Ratio of inertia force to elastic force is known as (A) Mach number (B) Froude number (C) Reynolds number (D) Weber's number

Last Answer : Answer: Option A

Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the total volume to the volume of voids in the bed (C) Mach number in an incompressible fluid is always unity (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Description : Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the ... the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Last Answer : (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Which of the following is not concerned with the fluid-particle interaction? (A) Drag co-efficient (B) Froude number (C) Galileo number (D) Weber number

Description : Which of the following is not concerned with the fluid-particle interaction? (A) Drag co-efficient (B) Froude number (C) Galileo number (D) Weber number

Last Answer : (D) Weber number

Consider the following statements in respect of critical flow in a wide rectangular channel: 1. The specific energy is minimum for a given discharge. 2. The discharge is maximum for a given specific energy 3. The specific force is minimum for a given discharge. 4. The Froude number is equal to unity. Which of these statements are correct? (a) 1 , 2 & 3 only (b) 1, 2, 3 & 4 (c) 1, 2 & 4 only (d) 2, 3 & 4 only

Description : Consider the following statements in respect of critical flow in a wide rectangular channel: 1. The specific energy is minimum for a given discharge. 2. The discharge is maximum for a given specific energy 3. The specific force is minimum for a ... b) 1, 2, 3 & 4 (c) 1, 2 & 4 only (d) 2, 3 & 4 only

Last Answer : (b) 1, 2, 3 & 4

The ratio of pressure forces to inertial forces is called the __________ number. (A) Froude (B) Euler (C) Reynold (D) Mach

Description : The ratio of pressure forces to inertial forces is called the __________ number. (A) Froude (B) Euler (C) Reynold (D) Mach

Last Answer : (B) Euler

The important dimensional group involved in the power requirement calculation in mixing operation is the __________ number. (A) Reynold's (B) Froude (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The important dimensional group involved in the power requirement calculation in mixing operation is the __________ number. (A) Reynold's (B) Froude (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The value of bulk modulus of a fluid is required to determine (A) Reynold's number (B) Froude's number (C) Mach number (D) Euler's number

Description : The value of bulk modulus of a fluid is required to determine (A) Reynold's number (B) Froude's number (C) Mach number (D) Euler's number

Last Answer : Answer: Option C

Which of the following is not a dimension-less parameter? (A) Pressure-co-efficient (B) Froude number (C) Kinematic viscosity (D) Weber number

Description : Which of the following is not a dimension-less parameter? (A) Pressure-co-efficient (B) Froude number (C) Kinematic viscosity (D) Weber number

Last Answer : (C) Kinematic viscosity

Ratio of inertia force to surface Jension is known as (A) Mach number (B) Froude number (C) (D) Weber's number

Description : Ratio of inertia force to surface Jension is known as (A) Mach number (B) Froude number (C) (D) Weber's number

Last Answer : Answer: Option D

The molecular number density of an ideal gas at standard temperature and pressure in cm3  a. Froude number  b. Loschmidt number  c. Mach number  d. Reynold number

Description : The molecular number density of an ideal gas at standard temperature and pressure in cm3  a. Froude number  b. Loschmidt number  c. Mach number  d. Reynold number

Last Answer : Loschmidt number

Mach number is important in a fluid flow problem, when the inertia and __________ forces predominate. (A) Elastic (B) Viscous (C) Gravity (D) None of these

Description : Mach number is important in a fluid flow problem, when the inertia and __________ forces predominate. (A) Elastic (B) Viscous (C) Gravity (D) None of these

Last Answer : (A) Elastic

Mach number is important in a fluid flow problem, when the inertia and __________ forces predominate. (A) Elastic (B) Viscous (C) Gravity (D) None of these

Description : Mach number is important in a fluid flow problem, when the inertia and __________ forces predominate. (A) Elastic (B) Viscous (C) Gravity (D) None of these

Last Answer : A) Elastic

Cp /Cv is termed as (A) Adiabatic constant (B) Mach number (C) Weber number (D) Prandtl number

Description : Cp /Cv is termed as (A) Adiabatic constant (B) Mach number (C) Weber number (D) Prandtl number

Last Answer : (A) Adiabatic constan

During agitation of liquids, the (A) Froude number is independent for the curves between power number and Reynolds number in baffled system (B) Power number becomes independent of impellers Reynolds number at high Reynolds number, but is dependent on the geometry of the impeller (C) Froude number is used to account for the effect of surface (e.g., the centre vortex) on the power number (D) All (A), (B) and (C)

Description : During agitation of liquids, the (A) Froude number is independent for the curves between power number and Reynolds number in baffled system (B) Power number becomes independent of impellers Reynolds number at high Reynolds number, ... , the centre vortex) on the power number (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Froude number is not a factor (A) For Reynolds number greater than 300 (B) When there is no vortex formation (C) For unbaffled tank (D) None of these

Description : Froude number is not a factor (A) For Reynolds number greater than 300 (B) When there is no vortex formation (C) For unbaffled tank (D) None of these

Last Answer : (B) When there is no vortex formation

Critical value of the __________ number governs the transition from laminar to turbulent flow in free convection heat transfer. (A) Grashoff (B) Reynolds (C) Both 'a' & 'b' (D) Prandtl & Grashoff

Description : Critical value of the __________ number governs the transition from laminar to turbulent flow in free convection heat transfer. (A) Grashoff (B) Reynolds (C) Both 'a' & 'b' (D) Prandtl & Grashoff

Last Answer : (D) Prandtl & Grashoff

Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. (du/dy) n the value of 'n' for pseudoplastic and Dilatant fluid are < 1 and >1 respectively (C) Shear stress for Newtonian fluid is proportional to the rate of shear in the direction perpendicular to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Description : Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. ... to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Last Answer : (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

The Mach number for hypersonic flow of compressible fluid is (A) 1 (B) > 1 (C) > 4 (D) < 2

Description : The Mach number for hypersonic flow of compressible fluid is (A) 1 (B) > 1 (C) > 4 (D) < 2

Last Answer : (C) > 4

In case of supersonic flow of a fluid through pipeline, the 'Mach number' is (A) 0 (B) 1 (C) < 1 (D) > 1

Description : In case of supersonic flow of a fluid through pipeline, the 'Mach number' is (A) 0 (B) 1 (C) < 1 (D) > 1

Last Answer : (D) > 1

Mach number is defined as the ratio of the local flow velocity to the sonic velocity in the fluid. For what value of Mach number, the gases are considered incompressible? (A) < 0.3 (B) > 3 (C) 50 (D) 1

Description : Mach number is defined as the ratio of the local flow velocity to the sonic velocity in the fluid. For what value of Mach number, the gases are considered incompressible? (A) < 0.3 (B) > 3 (C) 50 (D) 1

Last Answer : (A) < 0.3

Fluid flow in a/an __________ is an example of pressure flow. (A) Partially filled pipeline (B) Pipe (C) Open channel (D) River

Description : Fluid flow in a/an __________ is an example of pressure flow. (A) Partially filled pipeline (B) Pipe (C) Open channel (D) River

Last Answer : (B) Pipe

When the Mach number is less than unity, the flow is called (A) Sub-sonic flow (B) Sonic flow (C) Super-sonic flow (D) Hyper-sonic flow

Description : When the Mach number is less than unity, the flow is called (A) Sub-sonic flow (B) Sonic flow (C) Super-sonic flow (D) Hyper-sonic flow

Last Answer : Answer: Option A

When the Mach number is more than 6, the flow is called (A) Sub-sonic flow (B) Sonic flow (C) Super-sonic flow (D) Hyper-sonic flow

Description : When the Mach number is more than 6, the flow is called (A) Sub-sonic flow (B) Sonic flow (C) Super-sonic flow (D) Hyper-sonic flow

Last Answer : Answer: Option D

A flow is called sub-sonic, if the Mach number is (A) Less than unity (B) Unity (C) Between 1 and 6 (D) More than 6

Description : A flow is called sub-sonic, if the Mach number is (A) Less than unity (B) Unity (C) Between 1 and 6 (D) More than 6

Last Answer : Answer: Option A

The ratio of the inertia force to the elastic force is called (A) Reynold's number (B) Froude's number (C) Weber's number (D) Mach number

Description : The ratio of the inertia force to the elastic force is called (A) Reynold's number (B) Froude's number (C) Weber's number (D) Mach number

Last Answer : Answer: Option D

The value of critical Reynolds number for pipe flow is (A) 1,300(B) 10,000 (C) 100,000 (D) None of these

Description : The value of critical Reynolds number for pipe flow is (A) 1,300 (B) 10,000 (C) 100,000 (D) None of these

Last Answer : (A) 1,300

For an ideal fluid flow, Reynolds number is (A) 2100 (B) 100 (C) 0 (D) ∞

Description : For an ideal fluid flow, Reynolds number is (A) 2100 (B) 100 (C) 0 (D) ∞

Last Answer : (D) ∞

Laminar flow of a Newtonian fluid ceases to exist, when the Reynolds number exceeds (A) 4000 (B) 2100 (C) 1500 (D) 3000

Description : Laminar flow of a Newtonian fluid ceases to exist, when the Reynolds number exceeds (A) 4000 (B) 2100 (C) 1500 (D) 3000

Last Answer : (B) 2100

Isothermal turbulent flow of a fluid results in decrease of its pressure, which depends on the (A) Wall roughness (B) Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Isothermal turbulent flow of a fluid results in decrease of its pressure, which depends on the (A) Wall roughness (B) Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Which of the following equations applies to the fluid flow through a packed bed for very large Reynolds number? (A) Fanning equation (B) Blake-Plummer equation (C) Hagen-Poiseuille equation (D) Kozeny-Carman equation

Description : Which of the following equations applies to the fluid flow through a packed bed for very large Reynolds number? (A) Fanning equation (B) Blake-Plummer equation (C) Hagen-Poiseuille equation (D) Kozeny-Carman equation

Last Answer : (B) Blake-Plummer equation

The Reynolds number for an ideal fluid flow is (A) 4 (B) 2100-4000 (C) 4000 (D) ∞

Description : The Reynolds number for an ideal fluid flow is (A) 4 (B) 2100-4000 (C) 4000 (D) ∞

Last Answer : (D) ∞

Fanning friction factor for laminar flow of fluid in a circular pipe is (A) Not a function of the roughness of pipe wall (B) Inversely proportional to Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Fanning friction factor for laminar flow of fluid in a circular pipe is (A) Not a function of the roughness of pipe wall (B) Inversely proportional to Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

. In case of turbulent flow of fluid through a circular pipe, the (A) Mean flow velocity is about 0.5 times the maximum velocity (B) Velocity profile becomes flatter and flatter with increasing Reynolds number (C) Point of maximum instability exists at a distance of 2r/3 from the pipe wall (r = pipe radius) (D) Skin friction drag, shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Description : . In case of turbulent flow of fluid through a circular pipe, the (A) Mean flow velocity is about 0.5 times the maximum velocity (B) Velocity profile becomes flatter and flatter with ... , shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Last Answer : (D) Skin friction drag, shear stresses, random orientation of fluid particles and slope of velocity profile at the wall are more

Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the first fluid, the pressure drop will (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Description : Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the ... (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Last Answer : (B) Decrease

For the Stoke's law to be valid in the case of a falling sphere in a fluid, the (A) Reynolds number (based on sphere diameter) should be < 1 (B) Flow around the sphere should be in turbulent region (C) Sphere must be metallic (D) Fluid density should be constant

Description : For the Stoke's law to be valid in the case of a falling sphere in a fluid, the (A) Reynolds number (based on sphere diameter) should be < 1 (B) Flow around the sphere should be in turbulent region (C) Sphere must be metallic (D) Fluid density should be constant

Last Answer : (C) Sphere must be metallic

In open channel flow in a rectangular channel, the ratio between the critical depth and the initial depth, when a hydraulic jump occurs is (A) 0.5 (B) 0.84 (C) 1.84 (D) 1.25

Description : In open channel flow in a rectangular channel, the ratio between the critical depth and the initial depth, when a hydraulic jump occurs is (A) 0.5 (B) 0.84 (C) 1.84 (D) 1.25

Last Answer : (C) 1.84

A ultra-supercritical steam generator operates at pressures above the critical pressure- a. 2400 psi b. 1500 psi c. 3200 psi d. 4600 psi

Description : A ultra-supercritical steam generator operates at pressures above the critical pressure- a. 2400 psi b. 1500 psi c. 3200 psi d. 4600 psi

Last Answer : c. 3200 psi

Which type of generator is a type of boiler that at maximum critical pressure frequently used in the production of electric power. a. Supercritical boiler b. High pressure boiler c. Low pressure boiler d. None

Description : Which type of generator is a type of boiler that at maximum critical pressure frequently used in the production of electric power. a. Supercritical boiler b. High pressure boiler c. Low pressure boiler d. None

Last Answer : a. Supercritical boiler

A ultra-super critical boiler operates at…… a) artlU-Supercritical pressure b) Thermal pressure c) Critical pressure d) Atmospheric pressure

Description : A ultra-super critical boiler operates at…… a) artlU-Supercritical pressure b) Thermal pressure c) Critical pressure d) Atmospheric pressure

Last Answer : a) artlU-Supercritical pressure

Experimental study of laminar fluid flow through a circular tube was conducted by(A) Reynolds(B) Hagen and Poiseuille(C) Pascal(D) Blake-Plummer

Description : Experimental study of laminar fluid flow through a circular tube was conducted by (A) Reynolds (B) Hagen and Poiseuille (C) Pascal (D) Blake-Plummer

Last Answer : (B) Hagen and Poiseuille

Which of the fluid forces are not considered in the Reynold's equation of flow? (A) Viscous forces (B) Turbulent forces (C) Pressure forces (D) Compressibility forces

Description : Which of the fluid forces are not considered in the Reynold's equation of flow? (A) Viscous forces (B) Turbulent forces (C) Pressure forces (D) Compressibility forces

Last Answer : (D) Compressibility forces

The speed of a sound wave in a gas is analogous to the speed of (A) An elementary wave in an open channel (B) Flow in an open channel (C) A disturbance travelling upstream in moving fluid (D) None of these

Description : The speed of a sound wave in a gas is analogous to the speed of (A) An elementary wave in an open channel (B) Flow in an open channel (C) A disturbance travelling upstream in moving fluid (D) None of these

Last Answer : (A) An elementary wave in an open channel