The equation relating friction factor to Reynold number, f -0.5 = 4 loge (NRe /√f) -0.4 , is called the __________ equation. (A) Nikuradse (B) Von-Karman

The equation relating friction factor to Reynold number, f
-0.5 = 4
loge
(NRe
/√f)
-0.4
, is called the __________ equation.
(A) Nikuradse
(B) Von-Karman
by

1 Answer

Answer :

(B) Ergun's
by

Related questions

The equation f -0.5 = 4.07 loge (NRe √f) -0.6 is called the __________.(A) Colebrook formula (B) Von-Karman equation (C) Fanning equation (D) None of these

Description : The equation f -0.5 = 4.07 loge (NRe √f) -0.6 is called the __________. (A) Colebrook formula (B) Von-Karman equation (C) Fanning equation (D) None of these

Last Answer : (B) Von-Karman equation

Colebrook equation for friction factor in turbulent flow is given by, f -0.5 = -4 loge [(ε/D) + (1.26/NRe √F). It reduces to Nikuradse equation for a value of (ϵ/D) equal to (A) 0(B) 1 (C) ∞ (D) 0.5

Description : Colebrook equation for friction factor in turbulent flow is given by, f -0.5 = -4 loge [(ε/D) + (1.26/NRe √F). It reduces to Nikuradse equation for a value of (ϵ/D) equal to (A) 0 (B) 1 (C) ∞ (D) 0.5

Last Answer : (B) 1

The equation, Nst = (f/2)/[1 + 5 (Npr - 1) √(f/2)], corresponds to __________ analogy. (A) Von-Karman (B) Reynolds (C) Colburn (D) Prandtl

Description : The equation, Nst = (f/2)/[1 + 5 (Npr - 1) √(f/2)], corresponds to __________ analogy. (A) Von-Karman (B) Reynolds (C) Colburn (D) Prandtl

Last Answer : (D) Prandtl

What is the value of Fanning friction factor f ' for smooth pipe at NRe = 10 6 approximately? (A) 0.003 (B) 0.01 (C) 0.1(D) 0.3

Description : What is the value of Fanning friction factor f ' for smooth pipe at NRe = 10 6 approximately? (A) 0.003 (B) 0.01 (C) 0.1 (D) 0.3

Last Answer : (A) 0.003

Which of the following quantities are computed by using the hydraulic radius for non-circular ducts? (A) Velocity and relative roughness (B) Head loss and velocity (C) Reynold number, relative roughness and head loss (D) Reynolds number and friction factor

Description : Which of the following quantities are computed by using the hydraulic radius for non-circular ducts? (A) Velocity and relative roughness (B) Head loss and velocity (C) Reynold number, relative roughness and head loss (D) Reynolds number and friction factor

Last Answer : (C) Reynold number, relative roughness and head loss

Friction factor for a hydraulically smooth pipe at NRe = 2100 is f1 . If the pipe is further smoothened (i.e., roughness is reduced), the friction factor at the same value of NRe , will (A) Increase (B) Decrease (C) Remain unchanged (D) Increase or decrease depending on the pipe material

Description : Friction factor for a hydraulically smooth pipe at NRe = 2100 is f1 . If the pipe is further smoothened (i.e., roughness is reduced), the friction factor at the same value of NRe , will (A) Increase (B) Decrease (C) Remain unchanged (D) Increase or decrease depending on the pipe material

Last Answer : (A) Increase

In the complete turbulence zone (in rough pipes), the (A) Rough and smooth pipes have the same friction factor (B) Laminar film covers the roughness projections (C) Friction factor depends upon NRe only (D) Friction factor is independent of the relative roughness

Description : In the complete turbulence zone (in rough pipes), the (A) Rough and smooth pipes have the same friction factor (B) Laminar film covers the roughness projections (C) Friction factor depends upon NRe only (D) Friction factor is independent of the relative roughness

Last Answer : (D) Friction factor is independent of the relative roughness

In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said to have the same hydraulic roughness, when they have equal values of (A) Relative roughness (B) Absolute roughness (C) Friction co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Description : In case of hydraulically smooth pipe, the resistance to flow depends only on the Reynolds number, whereas for a hydraulically rough pipe, the resistance to flow is governed by the relative roughness. Two pipes are said ... co-efficient for flows at equal Reynold number (D) All (A), (B) & (C)

Last Answer : (C) Friction co-efficient for flows at equal Reynold number

The loss of head due to friction in a pipe of uniform diameter in which a viscous flow is taking place, is (where RN = Reynold number) (A) 1/RN (B) 4/RN (C) 16/RN (D) 64/RN

Description : The loss of head due to friction in a pipe of uniform diameter in which a viscous flow is taking place, is (where RN = Reynold number) (A) 1/RN (B) 4/RN (C) 16/RN (D) 64/RN

Last Answer : Answer: Option C

Which of the following equations is valid for laminar flow of a fluid through packed bed? (A) Fanning equation (B) Kozeny - Karman equation (C) Hagen-Poiseuille equation (D) Blake-Plummer equation

Description : Which of the following equations is valid for laminar flow of a fluid through packed bed? (A) Fanning equation (B) Kozeny - Karman equation (C) Hagen-Poiseuille equation (D) Blake-Plummer equation

Last Answer : (B) Kozeny - Karman equation

The relation between the skin depth and frequency is given by a) Skin depth α f b) Skin depth α 1/f c) Skin depth α √f d) Skin depth α 1/√f

Description : The relation between the skin depth and frequency is given by a) Skin depth α f b) Skin depth α 1/f c) Skin depth α √f d) Skin depth α 1/√f

Last Answer : d) Skin depth α 1/√f

Pick out the correct equation relating 'F' and 'A'. (A) F = A + PV (B) F = E + A (C) F = A - TS

Description : Pick out the correct equation relating 'F' and 'A'. (A) F = A + PV (B) F = E + A (C) F = A - TS

Last Answer : (A) F = A + PV

Pressure drop in a packed bed for laminar flow is given by the __________ equation. (A) Kozeny-Carman (B) Blake-Plummer (C) Leva's (D) Fanning friction factor

Description : Pressure drop in a packed bed for laminar flow is given by the __________ equation. (A) Kozeny-Carman (B) Blake-Plummer (C) Leva's (D) Fanning friction factor

Last Answer : (A) Kozeny-Carman

Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Pick out the wrong statement. (A) Fluid movement under the influence of buoyant forces resulting from change in density takes place in case of natural convection (B) The ratio NNu /NRe . Npr is called the Stanton number (C) The Peclet number is a measure of the ratio of energy transport by convection to that by conduction (D) The Colburn jH factor for heat transfer is given by Nst Npr

Description : Pick out the wrong statement. (A) Fluid movement under the influence of buoyant forces resulting from change in density takes place in case of natural convection (B) The ratio NNu /NRe . Npr is ... convection to that by conduction (D) The Colburn jH factor for heat transfer is given by Nst Npr

Last Answer : (D) The Colburn jH factor for heat transfer is given by Nst Npr

The ratio of inertial forces to viscous forces is called the __________ number. (A) Weber (B) Mach (C) Froude (D) Reynold

Description : The ratio of inertial forces to viscous forces is called the __________ number. (A) Weber (B) Mach (C) Froude (D) Reynold

Last Answer : (D) Reynold

The ratio of pressure forces to inertial forces is called the __________ number. (A) Froude (B) Euler (C) Reynold (D) Mach

Description : The ratio of pressure forces to inertial forces is called the __________ number. (A) Froude (B) Euler (C) Reynold (D) Mach

Last Answer : (B) Euler

Reynold's analogy states that (A) Nst α f (B) Nst α NRe (C) NNu α f (D) NRe α f

Description : Reynold's analogy states that (A) Nst α f (B) Nst α NRe (C) NNu α f (D) NRe α f

Last Answer : (A) Nst α f

f = 16/NRe , is valid for (A) Turbulent flow (B) Laminar flow through an open channel(C) Steady flow(D) None of these

Description : f = 16/NRe , is valid for (A) Turbulent flow (B) Laminar flow through an open channel (C) Steady flow (D) None of these

Last Answer : (D) None of these

In the equation P = PS/[1 + loge -1 (nt)] of a logistic curve of population growth, the constant m is (A) Ps × P (B) PS /P (C) (PS - Po)/Po (D) KP

Description : In the equation P = PS/[1 + loge -1 (nt)] of a logistic curve of population growth, the constant m is (A) Ps × P (B) PS /P (C) (PS - Po)/Po (D) KP

Last Answer : (C) (PS - Po)/Po

A fluid (µ/ρ) = 0.01 cm2 /sec is moving at critical flow condition (NRe = 2100) through a pipe of dia 3 cms. Velocity of flow is __________ cm/sec. (A) 7 (B) 700 (C) 7000 (D) 630

Description : A fluid (µ/ρ) = 0.01 cm2 /sec is moving at critical flow condition (NRe = 2100) through a pipe of dia 3 cms. Velocity of flow is __________ cm/sec. (A) 7 (B) 700 (C) 7000 (D) 630

Last Answer : (A) 7

Alexander von Humboldt described for the first time (a) laws of limiting factor (b) species area relationships (c) population growth equation (d) ecological biodiversity.

Description : Alexander von Humboldt described for the first time (a) laws of limiting factor (b) species area relationships (c) population growth equation (d) ecological biodiversity.

Last Answer : (b) species area relationships

Alexander Von Humbolt described for the first time: (1) Laws of limiting factor (2) Species area relationships (3) Population Growth equation (4) Ecological Biodiversity

Description : Alexander Von Humbolt described for the first time: (1) Laws of limiting factor (2) Species area relationships (3) Population Growth equation (4) Ecological Biodiversity

Last Answer : (2) Species area relationships

NRe . NPr ) (D/L) is called the __________ number (A) Peclet (B) Stanton (C) Graetz (D) None of these

Description : NRe . NPr ) (D/L) is called the __________ number (A) Peclet (B) Stanton (C) Graetz (D) None of these

Last Answer : (C) Graetz

(NRe . NSc ) is termed in mass transfer operation as the __________ number. (A) Stanton (B) Sherwood (C) Peclet (D) None of these

Description : (NRe . NSc ) is termed in mass transfer operation as the __________ number. (A) Stanton (B) Sherwood (C) Peclet (D) None of these

Last Answer : (C) Peclet

The formula HL = n²V²L/R 4/3 for the head loss in conduits is generally known as (A) Hazen-William's formula (B) Manning's formula (C) Darcy-Weisbach formula (D) Nikuradse formula

Description : The formula HL  = n²V²L/R 4/3 for the head loss in conduits is generally known as  (A) Hazen-William's formula  (B) Manning's formula  (C) Darcy-Weisbach formula  (D) Nikuradse formula

Last Answer : (B) Manning's formula 

According to Reynolds analogy, Stanton number is equal to (where, f = Fanning friction factor)(A) 2f(B) f(C) f/2(D) f/4

Description : According to Reynolds analogy, Stanton number is equal to (where, f = Fanning friction factor) (A) 2f (B) f (C) f/2 (D) f/4

Last Answer : (C) f/2

Reynold's analogy states that (where, St = Stanton number f = friction factor) (A) St = f/2 (B) St = f/4 (C) St = 4f (D) St = f 1/2

Description : Reynold's analogy states that (where, St = Stanton number f = friction factor) (A) St = f/2 (B) St = f/4 (C) St = 4f (D) St = f 1/2

Last Answer : (A) St = f/2

For the free settling of a spherical particle through a fluid, the slope of, CD-log NRe , plot is (A) 1(B) -1 (C) 0.5 (D) -0.5

Description : For the free settling of a spherical particle through a fluid, the slope of, CD-log NRe , plot is (A) 1 (B) -1 (C) 0.5 (D) -0.5

Last Answer : (B) -1

For a given Reynold number as d/D for an orifice increases, Cd will (where, d & D are orifice & pipe diameters respectively). (A) Increase (B) Decrease (C) Remain constant (D) Either (A) or (B); depends on other factors

Description : For a given Reynold number as d/D for an orifice increases, Cd will (where, d & D are orifice & pipe diameters respectively). (A) Increase (B) Decrease (C) Remain constant (D) Either (A) or (B); depends on other factors

Last Answer : (A) Increase

Heat transfer co-efficient (h) for a fluid flowing inside a clean pipe is given by h = 0.023 (K/D) (DVρ/µ) 0.8 (CP .µ/k) 0.4 . This is valid for the value of NRe equal to (A) < 2100 (B) 2100-4000 (C) > 4000 (D) > 10000

Description : Heat transfer co-efficient (h) for a fluid flowing inside a clean pipe is given by h = 0.023 (K/D) (DVρ/µ) 0.8 (CP .µ/k) 0.4 . This is valid for the value of NRe equal to (A) < 2100 (B) 2100-4000 (C) > 4000 (D) > 10000

Last Answer : (D) > 10000

What is the meaning of the name Karman ?

Description : What is the meaning of the name Karman ?

Last Answer : The Arabic name Karman means "generous" , " selfless" , " one who respects others".

Border line which separates outer space from Earth’s atmosphere is known as------? A. Durand line B. Space line C. Venus line D. Karman line (Answer)

Description : Border line which separates outer space from Earth’s atmosphere is known as------? A. Durand line B. Space line C. Venus line D. Karman line (Answer)

Last Answer : D. Karman line (Answer)

Singing of telephone wires in the wind occurs due to : (a) Vibrations caused by birds as they sit on or get off, the wires (b) Tensioning at the ends (c) Magnus effect (d) Generation of Karman Vortex street

Description : Singing of telephone wires in the wind occurs due to : (a) Vibrations caused by birds as they sit on or get off, the wires (b) Tensioning at the ends (c) Magnus effect (d) Generation of Karman Vortex street

Last Answer : (d) Generation of Karman Vortex street

From Arrhenius law, a plot of loge K versus 1/T gives a straight line with a slope of (-E/R). The unit of E/R is (A) k cal (B) k cal/°K (C) °K (D) k cal. °K

Description : From Arrhenius law, a plot of loge K versus 1/T gives a straight line with a slope of (-E/R). The unit of E/R is (A) k cal (B) k cal/°K (C) °K (D) k cal. °K

Last Answer : (C) °K

. The entropy change in a reversible isothermal process, when an ideal gas expands to four times its initial volume is (A) R loge 4 (B) R log10 4 (C) Cv log10 4 (D) Cv loge 4

Description : . The entropy change in a reversible isothermal process, when an ideal gas expands to four times its initial volume is (A) R loge 4 (B) R log10 4 (C) Cv log10 4 (D) Cv loge 4

Last Answer : (A) R loge 4

. The entropy change in a reversible isothermal process, when an ideal gas expands to four times its initial volume is (A) R loge 4 (B) R log10 4 (C) Cv log10 4 (D) Cv loge 4

Description : . The entropy change in a reversible isothermal process, when an ideal gas expands to four times its initial volume is (A) R loge 4 (B) R log10 4 (C) Cv log10 4 (D) Cv loge 4

Last Answer : (A) R loge 4

Pick out the wrong statement. (A) Trouton's ratio of non-polar liquids is calculated using Kistyakowsky equation (B) Thermal efficiency of a Carnot engine is always less than 1 (C) An equation relating pressure, volume and temperature of a gas is called ideal gas equation (D) None of these

Description : Pick out the wrong statement. (A) Trouton's ratio of non-polar liquids is calculated using Kistyakowsky equation (B) Thermal efficiency of a Carnot engine is always less than 1 (C) An equation relating pressure, volume and temperature of a gas is called ideal gas equation (D) None of these

Last Answer : (C) An equation relating pressure, volume and temperature of a gas is called ideal gas equation

The equation relating E, P, V and T which is true for all substances under all conditions is given by (∂E/∂V)T = T(∂P/∂T)H - P. This equation is called the (A) Maxwell's equation (B) Thermodynamic equation of state (C) Equation of state (D) Redlich-Kwong equation of state

Description : The equation relating E, P, V and T which is true for all substances under all conditions is given by (∂E/∂V)T = T(∂P/∂T)H - P. This equation is called the (A) Maxwell's equation (B) Thermodynamic equation of state (C) Equation of state (D) Redlich-Kwong equation of state

Last Answer : (B) Thermodynamic equation of state

Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Aerodynamic noise resulting from turbulent gas flow is the most prevalent source of valve noise in fluid flow control. It is caused due to (A) Reynold stresses (B) Shear forces (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

For a given Reynolds number, in a hydraulically smooth pipe, further smoothening __________ the friction factor. (A) Brings about no further reduction of (B) Increases (C) Decreases (D) None of these

Description : For a given Reynolds number, in a hydraulically smooth pipe, further smoothening __________ the friction factor. (A) Brings about no further reduction of (B) Increases (C) Decreases (D) None of these

Last Answer : (A) Brings about no further reduction of

The velocity corresponding to Reynold number of 2000 is called (A) Sub-sonic velocity (B) Super-sonic velocity (C) Lower critical velocity (D) Higher critical velocity

Description : The velocity corresponding to Reynold number of 2000 is called (A) Sub-sonic velocity (B) Super-sonic velocity (C) Lower critical velocity (D) Higher critical velocity

Last Answer : Answer: Option C

The velocity corresponding to Reynold number of 2800, is called (A) Sub-sonic velocity (B) Super-sonic velocity (C) Lower critical velocity (D) Higher critical velocity

Description : The velocity corresponding to Reynold number of 2800, is called (A) Sub-sonic velocity (B) Super-sonic velocity (C) Lower critical velocity (D) Higher critical velocity

Last Answer : Answer: Option D

For a turbine agitated and baffled tank, operating at low Reynold's number (based on impeller diameter), the power number (Np ) varies with NRe as (A) Np ∝ NRe (B) Np ∝ √NRe (C) Np → constan(D) Np ∝ 1/NRe

Description : For a turbine agitated and baffled tank, operating at low Reynold's number (based on impeller diameter), the power number (Np ) varies with NRe as (A) Np ∝ NRe (B) Np ∝ √NRe (C) Np → constan (D) Np ∝ 1/NRe

Last Answer : (D) Np ∝ 1/NRe

. (NSh /NRe .NSc ) is termed in mass transfer operation as the (A) Stanton number (B) Peclet number (C) Thermal diffusivity (D) Momentum diffusivity

Description : . (NSh /NRe .NSc ) is termed in mass transfer operation as the (A) Stanton number (B) Peclet number (C) Thermal diffusivity (D) Momentum diffusivity

Last Answer : (A) Stanton number

The Nusselt number for fully developed (both thermally and hydrodynamically) laminar flow through a circular pipe whose surface temperature remains constant is (A) 1.66(B) 88.66 (C) 3.66 (D) Dependent on NRe only

Description : The Nusselt number for fully developed (both thermally and hydrodynamically) laminar flow through a circular pipe whose surface temperature remains constant is (A) 1.66 (B) 88.66 (C) 3.66 (D) Dependent on NRe only

Last Answer : (C) 3.66

The Nusselt number for fully developed (both thermally and hydrodynamically) laminar flow through a circular pipe, where the wall heat flux is constant, is(A) 2.36(B) 4.36(C) 120.36(D) Dependent on NRe only

Description : The Nusselt number for fully developed (both thermally and hydrodynamically) laminar flow through a circular pipe, where the wall heat flux is constant, is (A) 2.36 (B) 4.36 (C) 120.36 (D) Dependent on NRe only

Last Answer : (B) 4.36

The inherent characteristic of an equal percentage valve relating flow rate 'q' with valve stem movement 'x' are described by the equation (A) dq/dx = K (B) dq/dx = K.q (C) dq/dx = K/q (D) dq/dx = Kq 2

Description : The inherent characteristic of an equal percentage valve relating flow rate 'q' with valve stem movement 'x' are described by the equation (A) dq/dx = K (B) dq/dx = K.q (C) dq/dx = K/q (D) dq/dx = Kq 2

Last Answer : (A) dq/dx = K

Transportation model was first introduced by ........................ in the year 1941. a. T C Koopman b. George B Dantzig c. Von-neumann d. F L Hitchcock

Description : Transportation model was first introduced by ........................ in the year 1941. a. T C Koopman b. George B Dantzig c. Von-neumann d. F L Hitchcock

Last Answer : d. F L Hitchcock