DHCP stands for………………………………..
A. Dynamic Host Control Protocol
B. Diskless Hosts Control protocol
C. Diskless Hosts Configuration protocol
D. Dynamic Host configuration Protocol

1 Answer

Answer :

D. Dynamic Host configuration Protocol

Related questions

Description : The ………………………. protocol was originally developed as a mechanism to enable diskless hosts to be remotely booted over a network as workstations. A. RARP B. ARP C. DHCP D. BOOTP

Last Answer : D. BOOTP

Description : Find out the components of DHCP: 1) A protocol that delivers host-specific configuration parameters from a server to a host. 2) The client determines its own hardware address; this is normally in a ROM on the hardware. 3) ... or permanent network addresses to hosts. A. 1,2 B. 1,3 C. 2,3 D. 1,2,3

Last Answer : B. 1,3

Description : DHCP stands for: a) Defferred Host Comparable Protocol b) Diode Host Counter Protocol c) Dynamic Host Configuration Protocol d) None of These

Last Answer : c) Dynamic Host Configuration Protocol

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) ... C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

Description : Which of the following is a transport layer protocol? a. stream control transmission protocol b. internet control message protocol c. neighbor discovery protocol d. dynamic host configuration protocol

Last Answer : a. stream control transmission protocol

Description : Which of the following is a transport layer protocol? A. stream control transmission protocol B. internet control message protocol C. neighbor discovery protocol D. dynamic host configuration protocol

Last Answer : A. stream control transmission protocol

Description : ……………………………. extends …………………………. to provide the full set of configuration parameters defined in the Requirements for Internet Hosts RFC. A. DHCP, BOOTP B. BOOTP, DHCP C. RARP, BOOTP D. DHCP, RARP

Last Answer : A. DHCP, BOOTP

Description : The ________is a three layer network protocol that contains addressing information and some control information that enables packets to be routed: a) User Datagram Protocol b) Internet Protocol c) Dynamic Host Configuration Protocol d) None of These

Last Answer : b) Internet Protocol

Description : What cangreatly reduce TCP/IP configuration problems? A. WINS Server B. WINS Proxy C. DHCP Server D. PDC E. None of the above

Last Answer : DHCP Server

Description : The Internet Control Message Protocol (ICMP) A. allows gateways to send error acontrol messages toother gateways or hosts B. provides communication between the Internet Protocol Software on one machine ... and takeaction to correct theproblem D. All of theabove E. None of the above

Last Answer : All of theabove

Description : ………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Last Answer : C. SLIP, PPP

Description : The address of a class B host is to be split into subnets with a 6-bit subnet number. What is the maximum number of subnets and the maximum number of hosts in each subnet? a. 62 subnets and 262142 hosts. b. 64 subnets and 262142 hosts. c. 62 subnets and 1022 hosts. d. 64 subnets and 1024 hosts

Last Answer : c. 62 subnets and 1022 hosts.

Description : Most of the inexpensive personal computers do not have any disk or diskette drive. What is the name of such computes? a. Home computers b. Diskless computers c. Dedicated computers d. General purpose computers

Last Answer : Home computers

Description : ICMP stands for __________ a. Internet Coordinate Message Protocol b. Internet Control Message Protocol c. Interconnect Control Message Protocol d. Interconnect Coordinate Message Protocol

Last Answer : b. Internet Control Message Protocol

Description : _______ isa dynamic mapping protocol in which a physical address is found for agiven logicaladdress. A) ARP B) RARP C) botha and b D) noneof the above

Last Answer : ARP

Description : Dynamic routing protocol enable routers to a. Dynamically discover and maintain routes b. Distribute routing updates to other routers c. Reach agreement with other routers about the network topology d. All of the above

Last Answer : d. All of the above

Description : The _______ is a dynamic mapping protocol in which a physical address is found for a given logical address. A. ARP B. RARP C. both a and b D. none of the above

Last Answer : B. RARP

Description : HMP (Host Monitoring Protocol) is: A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring ... used to monitor computers D. a protocol that handles error andcontrol messages E. None of the above

Last Answer : a protocol used to monitor computers

Description : Network layer protocol exits in _________ a. Host b. Switches c. Packets d. Bridges

Last Answer : a. Host

Description : A ________ is a 16-bit number used by the host-to-host protocol to identify to which higher- level protocol or application program (process) it must deliver incoming messages A. connection B. UDP C. port D. TCP

Last Answer : C. port

Description : One of the responsibilities of the transport layer protocol is to create a ______ communication. A. host-to-host B. process-to-process C. node-to-node D. none of the above

Last Answer : B. process-to-process

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : A) Automatic allocation

Description : Which of the following is not a mechanism that DHCP supports for IP address allocation? A) Automatic allocation B) Static allocation C) Dynamic allocation D) Manual allocation

Last Answer : B) Static allocation

Description : Which among the below mentioned protocols provides a mechanism of acquiring an IP address without manual intervention in addition to plug and play type of networking? a. BOOTP b. DHCP c. Both a & b d. None of the above

Last Answer : b. DHCP

Description : …………………………………. converts a physical network address into an IP address. A. ARP B. RARP C. DNS D. DHCP

Last Answer : B. RARP

Description : Discuss DHCP in detail.

Last Answer : Dynamic Host Configuration Protocol. A protocol used by a host, as it boots, to learn various network information, such as its IP address. - relies on the existence of a DHCP ... receives a broadcast DHCPDISCOVER message from a host - sends a unicast DHCPDISCOVER message to the DHCP server

Description : Which one of the following protocol is not used in internet?  HTTP  DHCP  DNS  None of the Above

Last Answer :  None of the Above

Description : FTP stands for A) File transfer protocol B) File transmission protocol C) Form transfer protocol D) Form transmission protocol

Last Answer : A) File transfer protocol

Description : FCP stands for _________ a. Fiber Channel Protocol b. Field Channel Protocol c. Fast Channel Protocol d. Fiber Carrying Protocol

Last Answer : a. Fiber Channel Protocol

Description : The term IPv4 stands for? a. Internet Protocol Version 4 b. Internet Programming Version 4 c. International Programming Version 4 d. None of these

Last Answer : a. Internet Protocol Version 4

Description : DDP stands for _________ a. Datagram Delivery Protocol b. Device Delivery Protocol c. Datagram Device Protocol d. Device Datagram Protocol

Last Answer : a. Datagram Delivery Protocol

Description : RIP stands for ________ a. Reduced Information Protocol b. Routing Internet Protocol c. Routing Information Protocol d. Reduced Internet Protocol

Last Answer : c. Routing Information Protocol

Description : HTTP stands for? a. Hyper terminal tracing program b. Hypertext tracing protocol c. Hypertext transfer protocol d. Hypertext transfer program

Last Answer : c. Hypertext transfer protocol

Description : SLIP stands for………………………….. A. Syncronous Level Interface Protocol B. Serial Line Interface Protocol C. Syncronous Level Internet Protocol D. Serial Line Internet Protocol

Last Answer : D. Serial Line Internet Protocol

Description : What does HTTPS stands for? A. Hyper Text Transmission Protocols B. Hyper Text Tile Protocols C. Hyper Text Transfer Protocol Secure D. None

Last Answer : C. Hyper Text Transfer Protocol Secure

Description : f four hosts on anetworkbelong tothesame group, a totalof _______ sent inresponse to a general query message. A) one membership report is B) two membership reports are C) three membership reports are D) noneof the above

Last Answer : two membership reports are

Description : A _______is an ARP thatacts on behalf of a set of hosts. A) ARP B) RARP C) proxy ARP D) noneof the above

Last Answer : proxy ARP

Description : A one-to-many communication between one sourceand a specific group of hosts is classifiedas a _______ communication. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : multicast

Description : A one-to-all communication between one source and all hosts on a network is classified as a_______ communication. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : broadcast

Description : With anIP address set starting with 150, you currently havesix offices that you are treating as subnets. Plans are in place toopen 10 more officesbefore the end of theyear. What subnet mask should you useto ... maximize thenumberof hosts available at eachsite? A. 192 B. 224 C. 240 D. 248 E. 252

Last Answer : 248

Description : You are working with a network thathas the network ID 192.168.10.0. What subnet should you use that supportsup to 25 hosts and a maximum number of subnets? A. 255.255.255.192 B. 255.255.255.224 C. 255.255.255.240 D. 255.255.255.248 E. 255.255.255.252

Last Answer : 255.255.255.224

Description : HOSTS file entries are limited to how many characters? A. 8 B. 255 C. 500 D. Unlimited E. None of the above

Last Answer : 255

Description : With anIP address of 100, you currently have 80 subnets. What subnet mask should you use to maximize the number of available hosts? A. 192 B. 224 C. 240 D. 248 E. 252

Last Answer : 252

Description : Which of the following statement is true? I. An address with all bits 1 is interpreted as all networks or all hosts. II. The class A network 128.0.0.0 is defined as the loopback network. a. i only b. ii only c. Both A and B d. None of the above

Last Answer : a. i only

Description : A packet filtering firewall can a. deny certain users from accessing a service b. block worms and viruses from entering the network c. disallow some files from being accessed through FTP d. block some hosts from accessing the network

Last Answer : d. block some hosts from accessing the network