Description : DDP stands for _________ a. Datagram Delivery Protocol b. Device Delivery Protocol c. Datagram Device Protocol d. Device Datagram Protocol
Last Answer : a. Datagram Delivery Protocol
Description : Which application-level protocol plays a crucial role in carrying out the data definition and manipulation in addition to X-500 features? a. TCP b. LDAP c. FTP d. None of the above
Last Answer : b. LDAP
Description : Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC
Last Answer : c. Both CSMA/CD & CSMA/CA
Description : Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for ... Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above
Last Answer : d. All the above
Description : Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC
Last Answer : C. Both CSMA/CD & CSMA/CA
Description : FTP stands for A) File transfer protocol B) File transmission protocol C) Form transfer protocol D) Form transmission protocol
Last Answer : A) File transfer protocol
Description : The term IPv4 stands for? a. Internet Protocol Version 4 b. Internet Programming Version 4 c. International Programming Version 4 d. None of these
Last Answer : a. Internet Protocol Version 4
Description : RIP stands for ________ a. Reduced Information Protocol b. Routing Internet Protocol c. Routing Information Protocol d. Reduced Internet Protocol
Last Answer : c. Routing Information Protocol
Description : ICMP stands for __________ a. Internet Coordinate Message Protocol b. Internet Control Message Protocol c. Interconnect Control Message Protocol d. Interconnect Coordinate Message Protocol
Last Answer : b. Internet Control Message Protocol
Description : HTTP stands for? a. Hyper terminal tracing program b. Hypertext tracing protocol c. Hypertext transfer protocol d. Hypertext transfer program
Last Answer : c. Hypertext transfer protocol
Description : DHCP stands for……………………………….. A. Dynamic Host Control Protocol B. Diskless Hosts Control protocol C. Diskless Hosts Configuration protocol D. Dynamic Host configuration Protocol
Last Answer : D. Dynamic Host configuration Protocol
Description : SLIP stands for………………………….. A. Syncronous Level Interface Protocol B. Serial Line Interface Protocol C. Syncronous Level Internet Protocol D. Serial Line Internet Protocol
Last Answer : D. Serial Line Internet Protocol
Description : What does HTTPS stands for? A. Hyper Text Transmission Protocols B. Hyper Text Tile Protocols C. Hyper Text Transfer Protocol Secure D. None
Last Answer : C. Hyper Text Transfer Protocol Secure
Description : Inthe _________ protocol weavoid unnecessary transmissionby sending only frames that are corrupted. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above
Last Answer : Selective-Repeat ARQ
Description : IP is _________ datagram protocol. A) an unreliable B) a connectionless C) botha and b D) noneof the above
Last Answer : botha and b
Description : ICMP is a _________ layer protocol. A) datalink B) transport C) network D) noneof the above
Last Answer : network
Description : The Routing Information Protocol (RIP) is an intradomain routing based on _________ routing. A) distancevector B) link state C) path vector D) none of the above
Last Answer : distancevector
Description : Network layer protocol exits in _________ a. Host b. Switches c. Packets d. Bridges
Last Answer : a. Host
Description : Which of hte following is considered a broad band communication channel? a. coaxial cable b. fiber optics cable c. microwave circuits d. all of above
Last Answer : all of above
Description : FDDI stands for A) Fiber Distributed Data Interface B) Fiber Data Distributed Interface C) Fiber Dual Distributed Interface D) Fiber Distributed Data Interface
Last Answer : A) Fiber Distributed Data Interface
Description : Transmission protocol, PRMA stands for _________ a) Pocket reservation multiple access b) Packet register multiple access c) Pocket register multiple access d) Packet reservation multiple access
Last Answer : d) Packet reservation multiple access
Description : Which of the following is an advantage to using fiber optics data transmission? a. resistance to data theft b. fast data transmission rate c. low noise level d. all of above
Last Answer : fast data transmission rate
Description : The acronym FTP stands for (A) File Transfer Protocol (B) Fast Transfer Protocol (C) File Tracking Protocol (D) File Transfer Procedure
Last Answer : (A) File Transfer Protocol
Description : In _________, autonegotiation allows two devices to negotiate the mode or datarate of operation. A) Standard B) Fast Ethernet C) Gigabit Ethernet D) Ten-Gigabit Ethernet
Last Answer : Fast Ethernet
Description : The IP packet that carries an IGMP packet has a value of _______ in its protocol field. A) 3 B) 2 C) 1 D) noneof the above
Last Answer : 2
Description : For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. ... packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.
Last Answer : c. Prevent packets from looping indefinitely
Description : The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channel capacity. Assuming that processing ... maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D
Last Answer : c. C
Description : Will FCP 6 run on a new Intel macbook pro?
Last Answer : I run fcp 5.5 on my mbp so I would be willing to bet 6.0 runs as well.
Description : Best large size budget monitor for FCP editing? Or should I go with a used Apple monitor or IPS panel? Any monitor people out there?
Last Answer : FCP?
Description : Exporting typewriter text from FCP.
Last Answer : answer:If you intend to show this to your clients, I'm assuming that this is more/less a concept piece. Show them text in whatever font will export. Print out the text as it will appear in the video. ... little exp. with FCP, sorry), or just go ahead and do something up quick in motion. Good luck!
Description : What are the datatransmission channels availablefor carrying datafrom one location to another? A. Narrowband B. Voice band C. Broadband D. All of theabove E. None of the above
Last Answer : All of theabove
Description : A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? a. 1 Mbps b. 2 Mbps c. 10 Mbps d. 12 Mbps
Last Answer : b. 2 Mbps
Description : A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network? a. 2 Mbps b. 60 Mbps c. 120 Mbps
Last Answer : a. 2 Mbps
Description : DTP computer abbreviation usually means ? DeskTop Publishing Data Type Programming Digital Transmission Protocol None Of above
Last Answer : Data Type Programming
Description : What does PPTP stand for ? Point to Point Transmission Protocol Point to Point Transfer Protocol Point to Point Tunneling Protocol Point to Point Traffic Protoco
Last Answer : Point to Point Tunneling Protocol
Description : A protocol is a set of rules governing a time sequence of events that must take place a. between peers b. between an interface c. between modems d. across an interface
Last Answer : between peers
Description : Which of the following is required to communicate between two computers? a. communications software b. protocol c. communication hardware d. all of above including access to transmission medium
Last Answer : all of above including access to transmission medium
Description : Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard ... indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing
Last Answer : RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data
Description : What is the number of separate protocol layers at the serial interface gateway specified by the X.25 standard? a. 4 b. 2 c. 6 d. 3 3. none of the above
Last Answer : 3
Description : _____defines a protocol data unit (PDU) that is somewhat similar to that of HDLC. A) MAC B) LLC C) LLU D) none of the above
Last Answer : LLC
Description : The most common protocol for point-to-pointaccess is the Point-to-Point Protocol (PPP), which is a _________protocol. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above
Last Answer : byte-oriented
Description : High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above
Last Answer : bit-oriented
Description : Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ
Last Answer : Stop-and-Wait
Description : Inthe _____ Protocol, the sender sends its frames oneafter another with noregard to the receiver. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ
Last Answer : Stop-and-Wait B) Simplest
Description : ______ is the cell relay protocol designed by the corresponding Forum and adopted by the ITU-T. A) X.25 B) Frame Relay C) ATM D) none of the above
Last Answer : ATM
Description : At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (b D) neither (a) nor (b)
Last Answer : neither (a) nor (b)
Description : The ________ protocol is the transmission mechanism used by the TCP/IP suite. A) ARP B) IP C) RARP D) noneof the above
Last Answer : IP
Description : _______ isa dynamic mapping protocol in which a physical address is found for agiven logicaladdress. A) ARP B) RARP C) botha and b D) noneof the above
Last Answer : ARP
Description : CBT isa ________ protocol that usesa core as the root of the tree. A) source-based B) group-shared C) a or b D) none of the above
Last Answer : group-shared
Description : DVMRP is a ________routing protocol,based on RIP. A) source-based B) group-shared C) both a and b D) none of the above
Last Answer : source-based