Description : In Ethernet addressing, if the least significant bit of the firstbyte is 0, the address is _________. A) unicast B) multicast C) broadcast D) none of the above
Last Answer : unicast
Description : In Ethernet addressing, ifall the bits are 1s, the address is _________. A) unicast B) multicast C) broadcast D) none of the above
Last Answer : broadcast
Description : If an Ethernet destination address is08:07:06:05:44:33, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove
Description : f an Ethernet destination address is07:01:02:03:04:05, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove
Last Answer : multicast
Description : IPv6 does not support which of the following addressing modes? a. unicast addressing b. multicast addressing c. broadcast addressing d. anycast addressing
Last Answer : c. broadcast addressing
Description : The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above
Last Answer : multicast group
Description : IGMP helps a ________ router createand update a list of loyal members relatedto each router interface. A) broadcast B) unicast C) multicast D) noneof the above
Description : An ARP request is normally _______. A) broadcast B) multicast C) unicast D) noneof the above
Description : An ARP reply isnormally_______. A) broadcast B) multicast C) unicast D) noneof the above
Description : RPB creates a shortest path _______ tree from thesourceto each destination. A) unicast B) multicast C) broadcast D) none of the above
Description : A one-to-many communication between one sourceand a specific group of hosts is classifiedas a _______ communication. A) unicast B) multicast C) broadcast D) none of the above
Description : A one-to-all communication between one source and all hosts on a network is classified as a_______ communication. A) unicast B) multicast C) broadcast D) none of the above
Description : Communication channel is shared by all the machines on the network in ________ a) broadcast network b) unicast network c) multicast network d) anycast network
Last Answer : a) broadcast network
Description : A one-to-one communication betweenone source and one destination is classified as a _______ communication. A) unicast B) multicast C) broadcast D) none of the above
Description : Which of the following statement is incorrect? A. The Addresses Resolution Protocol, ARP, allows a host to find the physicaladdress ofa target host on the samephysical network, given only the target IP address. ... -addresses of our choice to every machine. D. All of theabove E. None of the above
Last Answer : All of theabove
Description : Which of the following couldnot be an Ethernet unicast destination? A) 43:7B:6C:DE:10:00 B) 44:AA:C1:23:45:32 C) 46:56:21:1A:DE:F4 D) 48:32:21:21:4D:34
Last Answer : 43:7B:6C:DE:10:0
Description : Which of the following couldnot be an Ethernet multicast destination? A) B7:7B:6C:DE:10:00 B) 7B:AA:C1:23:45:32 C) 7C:56:21:1A:DE:F4 D) 83:32:21:21:4D:34
Last Answer : 7C:56:21:1A:DE:F4
Description : Each station on an Ethernet network has a unique _______ address imprinted onits network interface card (NIC). A) 5-byte B) 32-bit C) 48-bit D) none of the above
Last Answer : 48-b
Description : . In IPv6, the___________ address isgenerally usedby a normal host as a unicast address. A) provider-based unicast B) link local C) site local D) none of the above
Last Answer : provider-based unicast
Description : In IPv6, _______ address defines a single computer A. a unicast B. a multicast C. an anycast D. none of the above
Last Answer : A. a unicast
Description : Differentiate between Multicast and Unicast. -Technology
Last Answer : Multicast – Radio, TV and Satellite communication is referred to as Multicast, meaning one-way communication from single sending source to unlimited number of receivers.The internet transmission is 'Unicast‟, referring to two-way communication and being interactive.
Description : Which of the following devices discriminates between multicast and unicast packets? 1) Multicast switch 2) Bicast switch 3) Bicast router 4) Mulicast Router
Last Answer : 4) Mulicast Router
Description : Which of the following devices discriminates between multicast and unicast packets? 1 Multicast switch 2 Bicast switch 3 Bicast router 4 Mulicast Router
Last Answer : 4 Mulicast Router
Description : In IPv6,____ address defines a groupof computers with addresses that have thesame prefix. A) aunicast B) a multicast C) an anycast D) none of the above
Last Answer : an anycast
Description : In IPv6,_______ address defines asingle computer. A) aunicast B) a multicast C) an anycast D) none of the above
Last Answer : aunicast
Description : Which of the following IP address class is Multicast? a. Class A b. Class B c. Class C d. Class D
Last Answer : d. Class D
Description : In Ethernet CSMA/CD, the special bit sequence transmitted by media access management to handle collision is called a. Preamble b. Postamble c. Jam d. None of the above
Last Answer : c. Jam
Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256
Last Answer : d. 256
Description : Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464
Last Answer : c. 464
Description : In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above
Last Answer : a. Half the baud rate.
Description : What is the difference between the Ethernet frame preamble field and the IEEE 802.3 preamble and start of frame Delimiter fields? a. 1 byte b. 1 bit c. 4 bit d. 16 bit
Last Answer : a. 1 byte
Description : In classless addressing, the ______isanother name for thecommon part of the address range. A) suffix B) prefix C) netid D) none of the above
Last Answer : prefix
Description : The idea of address aggregation wasdesigned to alleviate theincreasein routing table entries when using ________. A) classful addressing B) classless addressing C) both a and b D) none of the above
Last Answer : classless addressing
Description : On which factors do the size of block depends in classless addressing? a. Nature & size of an entity b. Number of addresses c. Availability of the address space d. All of the above
Last Answer : a. Nature & size of an entity
Description : . A procedure included in the caller’s address space by the linker is known as ______. A. local procedure B. Universal procedure C. addressing linker D. both a and b
Last Answer : A. local procedure
Description : In _________, autonegotiation allows two devices to negotiate the mode or datarate of operation. A) Standard B) Fast Ethernet C) Gigabit Ethernet D) Ten-Gigabit Ethernet
Last Answer : Fast Ethernet
Description : The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above
Last Answer : 1-persistent
Description : Transport layer is implemented in _________ a. End system b. NIC c. Ethernet d. Signal transmission
Last Answer : a. End system
Description : In the Ethernet frame, the_______field contains error detection information. A) CRC B) preamble C) address D) none of the above
Last Answer : CRC
Description : In the Ethernet, the _______field is actually added at the physical layer and isnot (formally)part of the frame. A) CRC B) preamble C) address D) none of the above
Last Answer : preamble
Description : . What is the hexadecimal equivalentof the Ethernet address 01011010 0001000101010101 00011000 10101010 00001111? A) 5A:88:AA:18:55:F0 B) 5A:81:BA:81:AA:0F C) 5A:18:5A:18:55:0F D) 5A:11:55:18:AA:0F
Last Answer : 5A:11:55:18:AA:0F
Description : The target hardware address on an Ethernet is _______ in an ARP request. A) 0x000000000000 B) 0.0.0.0 C) variable D) class dependent
Last Answer : 0x000000000000
Description : Which of the following can be an Ethernet physical address? A. 01:02:01:2C:4B B. 07:01:02:01:2C:4B:2C C. 07:01:02:01:2C:4B D. none of the above
Last Answer : C. 07:01:02:01:2C:4B
Description : In unicast routing,each router in the domain has a table thatdefines a______ path tree to possible destinations. A) average B) longest C) shortest D) none of the above
Last Answer : shortest
Description : In a classful addressing, the IP addresses with 0 (zero) as network number: (A) refers to the current network (B) refers to broadcast on the local network (C) refers to broadcast on a distant network (D) refers to loopback testing
Last Answer : (A) refers to the current network
Description : In IPv6,_________addressdefinesagroup of computers. A) aunicast B) a multicast C) an anycast D) none of the above
Last Answer : a multicast
Description : A multicast message is sent from _______ to _______. A) onesource; one destination B) onesource; multiple destinations C) multiple sources; onedestination D) noneof the above
Last Answer : onesource; multiple destinations
Description : Which of the following is true about ICMP messages? A) An ICMP error message may be generated for an ICMP error message. B) An ICMP error message may be generated only for the first fragment. C) An ICMP error message may be generated for a multicast datagram. D) noneis true
Last Answer : An ICMP error message may be generated only for the first fragmen
Description : Which of the following is true about ICMP messages? A) An ICMP error message may be generated for an ICMP error message. B) An ICMP error message may be generated for each fragment. C) An ICMP error message may be generated for a multicast datagram. D) noneis true
Last Answer : noneis true