What is the difference between SCR and thyristor?

What is the difference between SCR and thyristor?
by

2 Answers

Answer :

Thyristor have many types:

ACS

ACST

AGT – Anode Gate Thyristor – A thyristor with gate on n-type layer near to the anode

ASCR – Asymmetrical SCR

BCT – Bidirectional Control Thyristor – A bidirectional switching device containing two thyristor structures with separate gate contacts

BOD – Breakover Diode – A gateless thyristor triggered by avalanche current

DIAC – Bidirectional trigger device

Dynistor – Unidirectional switching device

Shockley diode – Unidirectional trigger and switching device

SIDAC – Bidirectional switching device

Trisil, SIDACtor – Bidirectional protection devices

BRT – Base Resistance Controlled Thyristor

ETO – Emitter Turn-Off Thyristor[9]

GTO – Gate Turn-Off thyristor

DB-GTO – Distributed buffer gate turn-off thyristor

MA-GTO – Modified anode gate turn-off thyristor

IGCT – Integrated gate-commutated thyristor

Ignitor – Spark generators for fire-lighter ckts

LASCR – Light-activated SCR, or LTT – light-triggered thyristor

LASS – light-activated semiconducting switch

MCT – MOSFET Controlled Thyristor – It contains two additional FET structures for on/off control.

CSMT or MCS – MOS composite static induction thyristor

PUT or PUJT – Programmable Unijunction Transistor – A thyristor with gate on n-type layer near to the anode used as a functional replacement for unijunction transistor

RCT – Reverse Conducting Thyristor

SCS – Silicon Controlled Switch or Thyristor Tetrode – A thyristor with both cathode and anode gates

SCR – Silicon Controlled Rectifier

SITh – Static Induction Thyristor, or FCTh – Field Controlled Thyristor – containing a gate structure that can shut down anode current flow.

TRIAC – Triode for Alternating Current – A bidirectional switching device containing two thyristor structures with common gate contact

Quadrac – special type of thyristor which combines a DIAC and a TRIAC into a single package.
by

Answer :

SCR is a type of thyristor. Like GTO, IGCT, MCT, TRIAC, DIAC etc. are the types of thyristor.


by

Related questions

What is a thyristor? What is an SCR?

Description : What is a thyristor? What is an SCR?

Last Answer : A thyristor is a solid-state semiconductor device with four layers of alternating N and P-type material. They act as bi stable switches, conducting when their gate receives a current trigger, and continue ... ) is a four-layer solid state device that controls current. It is a type of thyristor.

A thyristor (SCR) turns off when the

Description : A thyristor (SCR) turns off when the  A) Gate pulse is removed B) Gate pulse is applied C) Thyristor current is below holding value D) Anode voltage is made negative

Last Answer : A thyristor (SCR) turns off when the Thyristor current is below holding value

Turn-on of a thyristor (SCR) takes place when

Description : Turn-on of a thyristor (SCR) takes place when  A) Anode to cathode voltage is positive B) Anode to cathode voltage is negative C) Positive current is applied to gate D) Anode to cathode voltage is positive and positive current pulse is applied to gate

Last Answer : Turn-on of a thyristor (SCR) takes place when Anode to cathode voltage is positive and positive current pulse is applied to gate

Is a SCR a thyristor?

Description : Is a SCR a thyristor?

Last Answer : Yes, SCR is a thyristor. Thyristor is the family and SCR is the member of that family but SCR is universally known as thyristor.

The function of Snubber circuit connected across the SCR is to

Description : The function of Snubber circuit connected across the SCR is to (A) Suppress dv/dt (B) Increase dv/dt (C) Decrease dv/dt (D) Decrease di/dt

Last Answer : The function of snubber circuit across a SCR is to Reduce dv/dt 

Once SCR starts conducting a forward current, its gate losses control over

Description : Once SCR starts conducting a forward current, its gate losses control over (A) Anode circuit voltage only (B) Anode circuit current only (C) Anode circuit voltage and current (D) None of the above

Last Answer : Anode circuit voltage and current 

SCR can act as _______ controlled rectifier.

Description : SCR can act as _______ controlled rectifier. A. phase B. frequency C. amplitude D. power  

Last Answer : SCR can act as phase controlled rectifier.

For an SCR with turn-on time of 5 microsecond, an ideal trigger pulse should have

Description : For an SCR with turn-on time of 5 microsecond, an ideal trigger pulse should have   (a) short rise time with pulse width = 3 µsec (b) long rise time with pulse width = 6 µsec (c) short rise time with pulse width = 6 µsec (d) None of the above 

Last Answer : a

For an SCR, di/dt protection is achieved through the use of

Last Answer : For an SCR, di/dt protection is achieved through the use of L in series with SCR.

The turn-off time of a thyristor is 30 is at 50°C. What is its turn-off time at 100°C ?

Description : The turn-off time of a thyristor is 30 is at 50°C. What is its turn-off time at 100°C ?

Last Answer : The turn-off time of a thyristor is 30 is at 50°C. What is its turn-off time at 100°C ? 60 microsecond

During forward blocking state, a thyristor is associated with .

Description : During forward blocking state, a thyristor is associated with . (A) Large current and low voltage (B) Low current and large voltage (C) Medium current and large voltage (D) None of the above

Last Answer : A

In thyristor. holding current is

Description : In thyristor. holding current is (A) More than the latching current (B) Less than the latching current (C) Equal to latching current (D) None of the above

Last Answer : In thyristor. holding current is less than the latching current

The typical ratio of latching current to holding current in a 20A thyristor is :

Description : The typical ratio of latching current to holding current in a 20A thyristor is : (A) 5.0 (B) 2.0 (C) 1.0 (D) 0.5

Last Answer : The typical ratio of latching current to holding current in a 20 A thyristor is  2.0

thyristor have how many terminals?

Last Answer : Thyristor have three terminals anode, cathode and Gate.

thyristor can be turned off by?

Description : thyristor can be turned off by?

Last Answer : Thyristor can be turned off by making anode potential equal to cathode potential or by making anode potential less than cathode potential.

what is thyristor commutation?

Last Answer : Thyristor commutation means turning off thyristor.

why thyristor is called semi controlled device?

Last Answer : Thyristor can only be turned on by small gate pulse but it cannot be turn off by using gate hence thyristor is called semi controlled device.

why thyristor is called latching device?

Last Answer : Thyristor can be turn on by positive gate pulse and the current will continue to flow through the device even when the gate voltage is low hence thyristor is called latching device.

How do you convert Flash files to .SCR files on a Mac?

Description : How do you convert Flash files to .SCR files on a Mac?

Last Answer : answer:I don't know it it's even possible to do it. And I don't think there's any software that would meet your specifications; Mac software to convert Flash to .scr. .SCR files are ... 's a pretty good program for Windows called InstantStorm that's free and would do the conversion pretty easily.

Are there any other keyboard shortcuts to take screen shots other than Prt Scr.

Description : Are there any other keyboard shortcuts to take screen shots other than Prt Scr.

Last Answer : You can always download a screenshot utility. Most of those are either click-based or have assignable key commands.

What is an analogy for fly using spr str scr and thr?

Description : What is an analogy for fly using spr str scr and thr?

Last Answer : What is the answer ?

A silicon controlled rectifier (SCR) is a solid state device used to change ________________. A. DC to AC and control relatively low load current B. AC to DC and control relatively high load current C. DC to AC and control relatively high load current D. AC to DC and control relatively low load current

Description : A silicon controlled rectifier (SCR) is a solid state device used to change ________________. A. DC to AC and control relatively low load current B. AC to DC and control relatively high load ... to AC and control relatively high load current D. AC to DC and control relatively low load current

Last Answer : Answer: B

Since the characteristics of the device shown in figure 'A' of the illustration includes a stable voltage and low current while operating, it can be suitably used in _____________. EL-0065 A. oscillators and SCR trigger circuits B. class A and B amplifiers C. generator rectifier and filtering supplies D. all of the above

Description : Since the characteristics of the device shown in figure 'A' of the illustration includes a stable voltage and low current while operating, it can be suitably used in _____________. EL-0065 A. oscillators ... . class A and B amplifiers C. generator rectifier and filtering supplies D. all of the above

Last Answer : Answer: A

What are the different operation regions of the SCR?

Description : What are the different operation regions of the SCR?

Last Answer : SCR or thyristor will have three regions of operations based on the mode in which the device is connected in the circuit. Reverse blocking region: When the cathode of the thyristor is made positive with ... scr. Hence a gate signal is applied before the forward break over voltage to trigger the scr.

What are the advantages of GTO over SCR?

Description : What are the advantages of GTO over SCR?

Last Answer : a. Elimination of commutation of commutating components in forced commutation, resulting in reduction in cost, weight and volume. b. Reduction in acoustic noise and electromagnetic noise due to ... turn-off, permitting high switching frequencies. d. Improved efficiency of the converters.

What are the different turn on methods of SCR?

Description : What are the different turn on methods of SCR?

Last Answer : Forward voltage triggering Gate Triggering dv/dt triggering Temperature triggering Light triggering

What is latching current in SCR?

Description : What is latching current in SCR?

Last Answer : It is the minimum current required to latch(turn on) the SCR from forward blocking state to forward conduction state.

What is holding current in SCR?

Description : What is holding current in SCR?

Last Answer : When scr is conducting current in forward conduction state, scr will return to forward blocking state when the anode current or forward current falls below a low level called Holding current Note: ... the turn off process. In general holding current will be slightly lesser than the latching current.

What you mean by SCR?

Description : What you mean by SCR?  

Last Answer : SCR is meant for silicon controlled rectifier.  

what is the main application of scr in electronic field as well as in software field?

Description : what is the main application of scr in electronic field as well as in software field?

Last Answer : Ans- SCR is a rectifier we use this in power handling applications . By varying on time and off time of the scr i.e by giving the pulse to its gate we can vary the average output power ... part we can use micro controller and write a programme so that to generate required pulses to control the SCR.

Which is the most suitable power device for high frequency ( more 100 kHz) switching application? a) Power MOSFET b) BJT c) SCR d) UJT

Description : Which is the most suitable power device for high frequency ( more 100 kHz) switching application? a) Power MOSFET b) BJT c) SCR d) UJT

Last Answer : Ans: Power MOSFET

A modern power semiconductor device IGBT is combines the characteristics of a) BJT and MOSFET b) FCT and GTO c) SCR and MOSFET d) SCR and BJT

Description : A modern power semiconductor device IGBT is combines the characteristics of a) BJT and MOSFET b) FCT and GTO c) SCR and MOSFET d) SCR and BJT

Last Answer : Ans: BJT and MOSFET

What is the only way to cause an SCR to stop conducting?

Description : What is the only way to cause an SCR to stop conducting?

Last Answer : The forward bias must be reduced below the minimum conduction level.

When an SCR is forward biased, what is needed to cause it to conduct?

Description : When an SCR is forward biased, what is needed to cause it to conduct?

Last Answer : A gate signal.

The SCR is primarily used for what function?

Description : The SCR is primarily used for what function?

Last Answer : The SCR is primarily used for switching power on or off.

When testing an SCR with an ohmmeter, the SCR will conduct if what two elements are shorted together?

Description : When testing an SCR with an ohmmeter, the SCR will conduct if what two elements are shorted together?

Last Answer : Gate and anode.

Purpose of Selective Catalytic Reduction (SCR)

Description : Purpose of Selective Catalytic Reduction (SCR)

Last Answer : Purpose of Selective Catalytic Reduction (SCR) : 1. It reduces Nox 75% to 90% 2. Converts it in to molecular nitrogen and water vapor 3. It reduces HC emission up to 80% 4. It reduces PM emission 20 to 25%.

Explain triggering of SCR using opto-coupler. State its advantages.

Description : Explain triggering of SCR using opto-coupler. State its advantages. 

Last Answer : Triggering of SCR using opto-coupler:  A simple opto-coupler based triggering circuit for SCR is shown in the figure. An optocoupler or opto-isolator is a combination of light source ... is small size and light weight device. iii)Interfacing with logic circuits is easily possible.

Draw the circuit diagram of battery charger using SCR and explain it’s working.

Description : Draw the circuit diagram of battery charger using SCR and explain it’s working.

Last Answer : Battery charger circuit using SCR: The figure shows the battery charger circuit using SCR. A 12V discharged battery is connected in the circuit and switch SW is closed. The singlephase 230V ... not fired. In this way, after full charging, further charging is automatically stopped.

Explain the thermal triggering method of SCR. Enlist different triggering methods of SCR.

Description : Explain the thermal triggering method of SCR. Enlist different triggering methods of SCR.

Last Answer : Types of Triggering: 1) Forward voltage triggering 2) Thermal triggering (Temperature triggering) 3) Radiation triggering (Light triggering) 4) dv/dt triggering 5) Gate triggering ... generated leakage current increases. This current gets multiplied internally and thyristor is turned on. 

Explain working of AC circuit breaker using SCR with circuit diagram.

Description : Explain working of AC circuit breaker using SCR with circuit diagram.

Last Answer : AC Circuit Breaker:  The circuit configuration of static AC circuit breaker using SCR is shown in the figure. When switch S' is closed, the SCRs T1 and T2 are fired in positive ... to non-availability of gate current. Thus the maximum time delay for breaking the circuit is one half-cycle.

Temperature controller using SCR

Description : Temperature controller using SCR

Last Answer : Temperature controller using SCR The temperature control circuit is used to regulate the temperature. Figure shows the temperature control circuit using thermostat as temperature detector and SCR as ... half-cycle and heater gets connected to source to produce heat and raise the temperature.

Compare SCR and TRIAC

Description : Compare SCR and TRIAC

Last Answer : SCR TRIAC It is an unidirectional device. It is a bidirectional device. It is turned-on by only positive gate current. It can be turned-on by either ... applications including lamp dimmer, heating control, zero voltage switched AC relay, small AC motor control etc.

Describe triggering of SCR using UJT relaxation oscillator.

Description : Describe triggering of SCR using UJT relaxation oscillator. 

Last Answer : I need it's operation

How GTO is advantages over SCR

Description : How GTO is advantages over SCR

Last Answer : i) It is turned-off by negative gate pulse. ii) No commutation circuit required, reducing the cost, size, weight and volume of the circuit. iii) As commutation choke is not used, the associated acoustic ... turn off time permits high switching frequency. v) It has higher di/dt rating at turn-off. 

Draw a neat labelling V-I characteristics of SCR and explain the region

Description : Draw a neat labelling V-I characteristics of SCR and explain the region

Last Answer : (i) Latching current: It is the minimum anode current required to maintain the SCR in the conduction state just after turn-on and the gate signal has been removed.  (ii) Holding current: It is the minimum anode current required to hold the conducting SCR in the ON state. 

Draw construction of SCR using two transistor model. Explain its operation.

Description : Draw construction of SCR using two transistor model. Explain its operation.

Last Answer : Two Transistor Model of SCR or Thyristor

An inductor is connected in series with SCR to protect it from

Description : An inductor is connected in series with SCR to protect it from A) Excessive high voltage B) Excessive high dv/dt C) Excessive high di/dt D) Excessive large forward current 

Last Answer : An inductor is connected in series with SCR to protect it from Excessive high di/dt

Turn on time of an SCR can be reduced by using a:

Description : Turn on time of an SCR can be reduced by using a:

Last Answer : Turn on time of an SCR can be reduced by using a: Rectangular pulse of high amplitude and narrow width

During forward blocking state, the SCR has:

Description : During forward blocking state, the SCR has:

Last Answer : During forward blocking state, the SCR has: low voltage, large current