Which operational mode/s of HDLC support/s the balanced configuration by governing point to point link connectivity in addition to the primary as well as secondary functions performed by the station?a. NRM b. ABM c. Both a & b d. None of the above

Which operational mode/s of HDLC
support/s the balanced configuration by
governing point to point link connectivity in
addition to the primary as well as secondary
functions performed by the station?
a. NRM
b. ABM
c. Both a & b
d. None of the above
by

1 Answer

Answer :

b. ABM
by

Related questions

Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for Modems) b. Frame Relay protocol as LAPF (Link Access Procedure for Frame Relay) c. ISDN (Integrated Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Description : Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for ... Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Last Answer : d. All the above

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Description : High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Last Answer : bit-oriented

Which of the following is a data link protocol? a. ethernet b. point to point protocol c. hdlc d. all of the mentioned

Description : Which of the following is a data link protocol? a. ethernet b. point to point protocol c. hdlc d. all of the mentioned

Last Answer : d. all of the mentioned

HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Description : HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Last Answer : High-leveldata link control

………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Description : ………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Last Answer : C. SLIP, PPP

Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Description : Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Last Answer : A. receive sliding window.

Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC

Description : Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC

Last Answer : c. Both CSMA/CD & CSMA/CA

Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC

Description : Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC

Last Answer : C. Both CSMA/CD & CSMA/CA

In a _______ connection, more thantwo devices can share asingle link. A) point-to-point B) multipoint C) primary D) secondary

Description : In a _______ connection, more thantwo devices can share asingle link. A) point-to-point B) multipoint C) primary D) secondary

Last Answer : multipoint

A _______connection provides a dedicated link between twodevices. A) point-to-point B) multipoint C) primary D) secondary

Description : A _______connection provides a dedicated link between twodevices. A) point-to-point B) multipoint C) primary D) secondary

Last Answer : point-to-point

Actual data processing operations are performed in the arithmetic logic section, but not in the “. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Description : Actual data processing operations are performed in the arithmetic logic section, but not in the “. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Last Answer : Primary

Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard synchronous communication protocol. c. RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Description : Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard ... indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Last Answer : RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data

_____defines a protocol data unit (PDU) that is somewhat similar to that of HDLC. A) MAC B) LLC C) LLU D) none of the above

Description : _____defines a protocol data unit (PDU) that is somewhat similar to that of HDLC. A) MAC B) LLC C) LLU D) none of the above

Last Answer : LLC

Which type of Sframe in HDLC exhibit the correspondence of last three bits [N(R)] by defining the negative acknowledgement (NAK) number with the code value of '01'? a. Receive ready b. Receive not ready c. Reject d. Selective Reject

Description : Which type of Sframe in HDLC exhibit the correspondence of last three bits [N(R)] by defining the negative acknowledgement (NAK) number with the code value of '01'? a. Receive ready b. Receive not ready c. Reject d. Selective Reject

Last Answer : c. Reject

Which category of HDLC frames undergoes error and flow control mechanisms by comprising send and receive sequence numbers? a. Uframes b. Iframes c. Sframes d. All of the above

Description : Which category of HDLC frames undergoes error and flow control mechanisms by comprising send and receive sequence numbers? a. Uframes b. Iframes c. Sframes d. All of the above

Last Answer : Sframes

Explain about HDLC

Description : Explain about HDLC

Last Answer : Station types: _ Primary station _ Secondary station Configurations: _ Unbalanced configuration _ Symmetrical configuration _ Balanced configuration Modes of communication: _ Normal Response Mode ... Flag field _ Address field _ Control field _ Information field _ FCS field

The …………… command customizes the kernel configuration and generates the files needed to compile and link the kernel. A. ping B. ifconfig C. make config D. finger

Description : The …………… command customizes the kernel configuration and generates the files needed to compile and link the kernel. A. ping B. ifconfig C. make config D. finger

Last Answer : C. make config

Operational audits generally have been conducted by internal and COA auditors, but may be performed by certified public accountants. A primary purpose of an operational audit is to provide: a. A measure of management performance in meeting organizational goalsb. The results of internal examinations of financial and accounting matters to a company's top-level management. c. Aid to the independent-auditor, who is conducting the examination of the financial statements. d. A means of assurance that internal accounting controls are functioning as planned.

Description : Operational audits generally have been conducted by internal and COA auditors, but may be performed by certified public accountants. A primary purpose of an operational audit is to provide: ... statements. d. A means of assurance that internal accounting controls are functioning as planned

Last Answer : A measure of management performance in meeting organizational goals

What is the process of copying software programs from secondary storage mediato the hard disk called? (A) Configuration(B) Download(C) Storage(D) Upload(E) Installation

Description : What is the process of copying software programs from secondary storage mediato the hard disk called? (A) Configuration (B) Download (C) Storage (D) Upload (E) Installation

Last Answer : Upload

In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer e. none of above

Description : In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer e. none of above

Last Answer : network layer

In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer

Description : In OSI network architecture, the routing is performed by a. network layer b. data link layer c. transport layer d. session layer

Last Answer : a. network layer

State weather the following statement is true or false for ISDN – Integrated Services Digital Network ISDN is an effort to standardize subscriber services, provide user/network interfaces 2). the goal of ISDN is to form a Local area network that provides Peer-to-Peer connectivity over digital media 3). It is a set of protocols that combines digital telephony and data transport services A. 1. True, 2. false, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Description : State weather the following statement is true or false for ISDN - Integrated Services Digital Network ISDN is an effort to standardize subscriber services, provide user/network interfaces 2). the goal of ISDN is to form a Local ... C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Last Answer : A. 1. True, 2. false, 3. true

Radio channels are attractive medium because __________ a) Can penetrate walls b) Connectivity can be given to mobile user c) Can carry signals for long distance d) All of the mentioned

Description : Radio channels are attractive medium because __________ a) Can penetrate walls b) Connectivity can be given to mobile user c) Can carry signals for long distance d) All of the mentioned

Last Answer : d) All of the mentioned

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

The primary advantage of key-to-tape data entry system is a. A large percentage of editing can be performed at the time of data entry b. Key verification is easily performed c. The tape is reusable d. Keying errors can be detected as they occur

Description : The primary advantage of key-to-tape data entry system is a. A large percentage of editing can be performed at the time of data entry b. Key verification is easily performed c. The tape is reusable d. Keying errors can be detected as they occur

Last Answer : The tape is reusable

A protocol is a set of rules governing a time sequence of events that must take place a. between peers b. between an interface c. between modems d. across an interface

Description : A protocol is a set of rules governing a time sequence of events that must take place a. between peers b. between an interface c. between modems d. across an interface

Last Answer : between peers

------------------- is a set of rules governing the format and meaning of the packets, or messages that are exchanged by the peer entities within a layer. a. Interface b. Reference model c. Protocol d. None of these

Description : ------------------- is a set of rules governing the format and meaning of the packets, or messages that are exchanged by the peer entities within a layer. a. Interface b. Reference model c. Protocol d. None of these

Last Answer : c. Protocol

Network Architecture refers to the layout of the network consisting of the hardware, software, connectivity, communication protocols and mode of transmission, such as ____: a) Wired b) Wireless c) Wired or Wireless d) None of These

Description : Network Architecture refers to the layout of the network consisting of the hardware, software, connectivity, communication protocols and mode of transmission, such as ____: a) Wired b) Wireless c) Wired or Wireless d) None of These

Last Answer : c) Wired or Wireless

In FDDI, data normally travel on .................. A) The primary ring B) The Secondary ring C) Both rings D) Neither ring

Description : In FDDI, data normally travel on .................. A) The primary ring B) The Secondary ring C) Both rings D) Neither ring

Last Answer : A) The primary ring

The routing processor of arouter performs the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Description : The routing processor of arouter performs the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Last Answer : network

The inputand output portsof a router perform the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Description : The inputand output portsof a router perform the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Last Answer : physical and data link

Which sublayer of the data link layer performs data link functions that depend upon the type of medium? a. logical link control sublayer b. media access control sublayer c. network interface control sublayer d. error control sublayer

Description : Which sublayer of the data link layer performs data link functions that depend upon the type of medium? a. logical link control sublayer b. media access control sublayer c. network interface control sublayer d. error control sublayer

Last Answer : b. media access control sublayer

The functions of a Logical Link Layer (LLC) are a. Error control b. Flow control c. Creating and managing the communication link between two devices with the help of the Transport layer. d. All the above

Description : The functions of a Logical Link Layer (LLC) are a. Error control b. Flow control c. Creating and managing the communication link between two devices with the help of the Transport layer. d. All the above

Last Answer : d. All the above

Which sublayer of the data link layer performs data link functions that depend upon the type of medium? A. logical link control sublayer B. media access control sublayer C. network interface control sublayer D. error control sublayer

Description : Which sublayer of the data link layer performs data link functions that depend upon the type of medium? A. logical link control sublayer B. media access control sublayer C. network interface control sublayer D. error control sublayer

Last Answer : B. media access control sublayer

The functions of a Logical Link Layer (LLC) are ___. A. Error control B. Flow control C. Creating and managing the communication link between two devices with the help of the Transport layer. D. All the above

Description : The functions of a Logical Link Layer (LLC) are ___. A. Error control B. Flow control C. Creating and managing the communication link between two devices with the help of the Transport layer. D. All the above

Last Answer : D. All the above

State any four factors governing Selection of site for thermal power station.

Description : State any four factors governing Selection of site for thermal power station. 

Last Answer : Following Factors are to be considered:- 1. It should locate near coal mine. 2. Sufficient quantity of water should be available. 3. Sufficient large space should be available. 4. It should be located ... laws of the land and the town planning. 14. The interests of national defense must be served.

Which among the below mentioned protocols provides a mechanism of acquiring an IP address without manual intervention in addition to plug and play type of networking? a. BOOTP b. DHCP c. Both a & b d. None of the above

Description : Which among the below mentioned protocols provides a mechanism of acquiring an IP address without manual intervention in addition to plug and play type of networking? a. BOOTP b. DHCP c. Both a & b d. None of the above

Last Answer : b. DHCP

Which layer provides interface between network support layers and user support layers? a. session layer b. data link layer c. transport layer d. network layer

Description : Which layer provides interface between network support layers and user support layers? a. session layer b. data link layer c. transport layer d. network layer

Last Answer : c. transport layer

In the inverting configuration, what is the voltage (for all practical purposes) at the inverting input to the operational amplifier if the input signal is a 1-volt, peak-to-peak sine wave?

Description : In the inverting configuration, what is the voltage (for all practical purposes) at the inverting input to the operational amplifier if the input signal is a 1-volt, peak-to-peak sine wave?

Last Answer : 0 volts.

What does the term "closed-loop" mean in the closed-loop configuration of an operational amplifier?

Description : What does the term "closed-loop" mean in the closed-loop configuration of an operational amplifier?

Last Answer : The use of degenerative (negative) feed-back

In the _______ method, the primary device controls the link; thesecondary devices follow its instructions. A) reservation B) polling C) token passing D) none of the above

Description : In the _______ method, the primary device controls the link; thesecondary devices follow its instructions. A) reservation B) polling C) token passing D) none of the above

Last Answer : polling

Lighter and final operations performed on the soil after tillage operations. A) Primary. C) Tertiary B) Secondary D) None

Description : Lighter and final operations performed on the soil after tillage operations. A) Primary. C) Tertiary B) Secondary D) None

Last Answer : Primary

Finner operation performed for seedbed preparation is :- A. Primary tillage C. Strip tillage B. Secondary tillage D. Rotary tillage

Description : Finner operation performed for seedbed preparation is :- A. Primary tillage C. Strip tillage B. Secondary tillage D. Rotary tillage

Last Answer : Primary tillage

Actual data processing operations are performed in the arithmetic logic section, but not in the …. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Description : Actual data processing operations are performed in the arithmetic logic section, but not in the …. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Last Answer : a. Primary

Actual data processing operations are performed in the arithmetic logic section, but not in the …. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Description : Actual data processing operations are performed in the arithmetic logic section, but not in the …. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Last Answer : a. Primary

As compared to the secondary memory, the primary memory of a computer is a. Large b. Cheap c. Fast d. Slow

Description : As compared to the secondary memory, the primary memory of a computer is a. Large b. Cheap c. Fast d. Slow

Last Answer : Fast

The central processing unit (CPU) consists of a. Input, output and processing b. Control unit, primary storage, and secondary storage c. Control unit, arithmetic-logic unit and primary storage d. Control unit, processing, and primary storage

Description : The central processing unit (CPU) consists of a. Input, output and processing b. Control unit, primary storage, and secondary storage c. Control unit, arithmetic-logic unit and primary storage d. Control unit, processing, and primary storage

Last Answer : Control unit, arithmetic-logic unit and primary storage

The central processing unit (CPU) consists of a. Input, output and processing b. Control unit, primary storage, and secondary storage c. Control unit, arithmetic-logic unit and primary storage d. Control unit, processing, and primary storage

Description : The central processing unit (CPU) consists of a. Input, output and processing b. Control unit, primary storage, and secondary storage c. Control unit, arithmetic-logic unit and primary storage d. Control unit, processing, and primary storage

Last Answer : Control unit, arithmetic-logic unit and primary storage