Which category of HDLC frames undergoes error and flow control mechanisms by comprising send and receive sequence numbers? a. Uframes b. Iframes c. Sframes d. All of the above

Which category of HDLC frames
undergoes error and flow control mechanisms
by comprising send and receive sequence
numbers?
a. Uframes
b. Iframes
c. Sframes
d. All of the above
by

1 Answer

Answer :

Sframes
by

Related questions

Which type of Sframe in HDLC exhibit the correspondence of last three bits [N(R)] by defining the negative acknowledgement (NAK) number with the code value of '01'? a. Receive ready b. Receive not ready c. Reject d. Selective Reject

Description : Which type of Sframe in HDLC exhibit the correspondence of last three bits [N(R)] by defining the negative acknowledgement (NAK) number with the code value of '01'? a. Receive ready b. Receive not ready c. Reject d. Selective Reject

Last Answer : c. Reject

In Stop-and-Wait ARQ, we use sequence numbers to number the frames. The sequence numbers are based on __________arithmetic. A) modulo-2 B) modulo-4 C) modulo-m D) none of the above

Description : In Stop-and-Wait ARQ, we use sequence numbers to number the frames. The sequence numbers are based on __________arithmetic. A) modulo-2 B) modulo-4 C) modulo-m D) none of the above

Last Answer : modulo-2

An error-detectingcode inserted asa field in a blockof data tobe transmitted is known as A. Frame check sequence B. Error detecting code C. Checksum D. flow control E. None of the above

Description : An error-detectingcode inserted asa field in a blockof data tobe transmitted is known as A. Frame check sequence B. Error detecting code C. Checksum D. flow control E. None of the above

Last Answer : Frame check sequence

_______ control refers to aset of proceduresused torestrict the amount ofdata that the sender can send before waiting foracknowledgment. A) Flow B) Error C) Transmission D) none of the above

Description : _______ control refers to aset of proceduresused torestrict the amount ofdata that the sender can send before waiting foracknowledgment. A) Flow B) Error C) Transmission D) none of the above

Last Answer : Flow

HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Description : HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Last Answer : High-leveldata link control

High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Description : High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Last Answer : bit-oriented

Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC

Description : Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC

Last Answer : c. Both CSMA/CD & CSMA/CA

Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for Modems) b. Frame Relay protocol as LAPF (Link Access Procedure for Frame Relay) c. ISDN (Integrated Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Description : Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for ... Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Last Answer : d. All the above

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Description : Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Last Answer : A. receive sliding window.

Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC

Description : Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC

Last Answer : C. Both CSMA/CD & CSMA/CA

The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channelcapacity. Assuming that processing delay is negligible, the minimum number of bits for the sequence number field in a frame for maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Description : The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channel capacity. Assuming that processing ... maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Last Answer : c. C

Which provision can resolve / overcome the shortcomings associated with duplication or failure condition of Stop and Wait Automatic Repeat Request protocol especially due to loss of data frames or non reception of acknowledgement? a. Provision of sequence number in the header of message b. Provision of checksum computation c. Both a & b d. None of the above

Description : Which provision can resolve / overcome the shortcomings associated with duplication or failure condition of Stop and Wait Automatic Repeat Request protocol especially due to loss of data frames or non reception ... message b. Provision of checksum computation c. Both a & b d. None of the above

Last Answer : Provision of sequence number in the header of message

The probability thata singlebit will be inerror on a typical public telephone lineusing 4800 bps modem is 10 to the power -3. If no error detection mechanism is used, the residual error ratefor a communicationline using 9-bit frames is approximately equal to A. 0.003 B. 0.009 C. 0.991 D. 0.999 E. None of the above

Description : The probability thata singlebit will be inerror on a typical public telephone lineusing 4800 bps modem is 10 to the power -3. If no error detection mechanism is used, the residual error ratefor a communicationline using 9-bit frames is ... to A. 0.003 B. 0.009 C. 0.991 D. 0.999 E. None of the above

Last Answer : 0.009

In Go-Back-N ARQ, if frames 4,5, and 6 are received successfully, thereceiver may send an ACK _______ to thesender. A) 5 B) 6 C) 7 D) any of theabove

Description : In Go-Back-N ARQ, if frames 4,5, and 6 are received successfully, thereceiver may send an ACK _______ to thesender. A) 5 B) 6 C) 7 D) any of theabove

Last Answer : 7

Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard synchronous communication protocol. c. RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Description : Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard ... indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Last Answer : RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data

_____defines a protocol data unit (PDU) that is somewhat similar to that of HDLC. A) MAC B) LLC C) LLU D) none of the above

Description : _____defines a protocol data unit (PDU) that is somewhat similar to that of HDLC. A) MAC B) LLC C) LLU D) none of the above

Last Answer : LLC

Which URL method of HTTP performs similar function as that of PUT method only with an exception of request comprising a list of differences that exhibit thed. OPTION necessity to get implemented in the existing file? a. POST b. GET c. PATCH

Description : Which URL method of HTTP performs similar function as that of PUT method only with an exception of request comprising a list of differences that exhibit the necessity to get implemented in the existing file? a. POST b. GET c. PATCH d. OPTION

Last Answer : c. PATCH

Which operational mode/s of HDLC support/s the balanced configuration by governing point to point link connectivity in addition to the primary as well as secondary functions performed by the station?a. NRM b. ABM c. Both a & b d. None of the above

Description : Which operational mode/s of HDLC support/s the balanced configuration by governing point to point link connectivity in addition to the primary as well as secondary functions performed by the station? a. NRM b. ABM c. Both a & b d. None of the above

Last Answer : b. ABM

Which of the following is a data link protocol? a. ethernet b. point to point protocol c. hdlc d. all of the mentioned

Description : Which of the following is a data link protocol? a. ethernet b. point to point protocol c. hdlc d. all of the mentioned

Last Answer : d. all of the mentioned

………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Description : ………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Last Answer : C. SLIP, PPP

Explain about HDLC

Description : Explain about HDLC

Last Answer : Station types: _ Primary station _ Secondary station Configurations: _ Unbalanced configuration _ Symmetrical configuration _ Balanced configuration Modes of communication: _ Normal Response Mode ... Flag field _ Address field _ Control field _ Information field _ FCS field

The Internet Control Message Protocol (ICMP) A. allows gateways to send error acontrol messages toother gateways or hosts B. provides communication between the Internet Protocol Software on one machine and the InternetProtocol Software on another C. reports error conditions tothe original source, the source must relate errors to individual applicationprograms and takeaction to correct theproblem D. All of theabove E. None of the above

Description : The Internet Control Message Protocol (ICMP) A. allows gateways to send error acontrol messages toother gateways or hosts B. provides communication between the Internet Protocol Software on one machine ... and takeaction to correct theproblem D. All of theabove E. None of the above

Last Answer : All of theabove

Which feature of Go Back N ARQ mechanism possesses an ability to assign the sliding window in the forward direction? a. Control Variables b. Sender Sliding Window c. Receiver Sliding Window d. Resending of frames

Description : Which feature of Go Back N ARQ mechanism possesses an ability to assign the sliding window in the forward direction? a. Control Variables b. Sender Sliding Window c. Receiver Sliding Window d. Resending of frames

Last Answer : b. Sender Sliding Window

Which feature of Go-Back-N ARQ mechanism possesses an ability to assign the sliding window in the forward diretion? A. Control Variables B. Sender Sliding Window C. Receiver Sliding Window D. Resending of frames

Description : Which feature of Go-Back-N ARQ mechanism possesses an ability to assign the sliding window in the forward diretion? A. Control Variables B. Sender Sliding Window C. Receiver Sliding Window D. Resending of frames

Last Answer : B. Sender Sliding Window

The purpose of the _______is to provide flow and error control for the upper-layer protocols that actually demand theseservices A) MAC B) LLC C) LLU D) none of the above

Description : The purpose of the _______is to provide flow and error control for the upper-layer protocols that actually demand theseservices A) MAC B) LLC C) LLU D) none of the above

Last Answer : LLC

Which among the following represents the objectives/requirements of Data Link Layer? a. Frame Synchronization b. Error & Flow Control c. Both a & b d. None of the above

Description : Which among the following represents the objectives/requirements of Data Link Layer? a. Frame Synchronization b. Error & Flow Control c. Both a & b d. None of the above

Last Answer : c. Both a & b

The functions of a Logical Link Layer (LLC) are a. Error control b. Flow control c. Creating and managing the communication link between two devices with the help of the Transport layer. d. All the above

Description : The functions of a Logical Link Layer (LLC) are a. Error control b. Flow control c. Creating and managing the communication link between two devices with the help of the Transport layer. d. All the above

Last Answer : d. All the above

The _______ is a unidirectional protocol that has no flow or error control. A. Simplest B. Simplex C. TCP/IP protocol D. Simplest or Simplex

Description : The _______ is a unidirectional protocol that has no flow or error control. A. Simplest B. Simplex C. TCP/IP protocol D. Simplest or Simplex

Last Answer : D. Simplest or Simplex

The functions of a Logical Link Layer (LLC) are ___. A. Error control B. Flow control C. Creating and managing the communication link between two devices with the help of the Transport layer. D. All the above

Description : The functions of a Logical Link Layer (LLC) are ___. A. Error control B. Flow control C. Creating and managing the communication link between two devices with the help of the Transport layer. D. All the above

Last Answer : D. All the above

In Selective Repeat ARQ, if 5 is the number ofbits for the sequence number, then the maximum size of the receive window mustbe _____ A) 15 B) 16 C) 31 D) 1

Description : In Selective Repeat ARQ, if 5 is the number ofbits for the sequence number, then the maximum size of the receive window mustbe _____ A) 15 B) 16 C) 31 D) 1

Last Answer : 16

The range of sequence number which is the concern of the receiver is called the receive sliding window. A. receive sliding window. B. sliding window C. frame buffer D. both a and b

Description : The range of sequence number which is the concern of the receiver is called the receive sliding window. A. receive sliding window. B. sliding window C. frame buffer D. both a and b

Last Answer : A. receive sliding window.

The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can receive and send datasimultaneously C. can sendor receive data one ata time D. can do one way data transmission only E. None of the above

Description : The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can ... data one ata time D. can do one way data transmission only E. None of the above

Last Answer : can do one way data transmission only

Are iFrames too archaic to use in a modern site?

Description : Are iFrames too archaic to use in a modern site?

Last Answer : iFrames were never a correct solution, for anything. They're a microsoft invention, and no browser but IE ever supported them the way Microsoft intended them to be. I have no idea what you ... actually meant. Creating a separate and formatting for style and layout with CSS is the correct solution.

In Selective Repeat ARQ, if 5 is the number ofbits for the sequence number, then the maximum size of the send window must be _____ A) 15 B) 16 C) 31 D) 1

Description : In Selective Repeat ARQ, if 5 is the number ofbits for the sequence number, then the maximum size of the send window must be _____ A) 15 B) 16 C) 31 D) 1

Last Answer : 16

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errorsd. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

What is the responsibility of the logical unit in the CPU of a computer? a. To produce result b. To compare numbers c. To control flow of information d. To do math’s works

Description : What is the responsibility of the logical unit in the CPU of a computer? a. To produce result b. To compare numbers c. To control flow of information d. To do math’s works

Last Answer : To compare numbers

In a Go-Back-N ARQ, if the window size is 63,what is the range of sequence numbers? A) 0to 63 B) 0to 64 C) 1to 63 D) 1to 64

Description : In a Go-Back-N ARQ, if the window size is 63,what is the range of sequence numbers? A) 0to 63 B) 0to 64 C) 1to 63 D) 1to 64

Last Answer : 0to 63

the maximum window size for data transmission using the selective reject protocol with n-bit frame sequence numbers is: a. 2^n b. 2^(n-1) c. 2^n – 1 d. 2^(n-2)

Description : the maximum window size for data transmission using the selective reject protocol with n-bit frame sequence numbers is: a. 2^n b. 2^(n-1) c. 2^n – 1 d. 2^(n-2)

Last Answer : b. 2^(n-1)

In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the first and the last bytes of the payload, respectively are a. Last fragment, 2400 and 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Last Answer : c. Last fragment, 2400 and 2759

In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the first and the last bytes of the payload, respectively are a. Last fragment, 2400 and 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Last Answer : c. Last fragment, 2400 and 2759

In a Go-Back-N ARQ, if the window size is 63, what is the range of sequence numbers? A. 0 to 63 B. 0 to 64 C. 1 to 63 D. 1 to 64

Description : In a Go-Back-N ARQ, if the window size is 63, what is the range of sequence numbers? A. 0 to 63 B. 0 to 64 C. 1 to 63 D. 1 to 64

Last Answer : A. 0 to 63

A process comprising an ongoing consideration and evaluation of the firm's system of quality control, including a periodic inspection of a selection of completed engagements, designed to enable the firm to obtain reasonable assurance that its system of quality control is operating effectively. a. Inspection b. Monitoring c. Peer review d. Engagement quality control review

Description : A process comprising an ongoing consideration and evaluation of the firm's system of quality control, including a periodic inspection of a selection of completed engagements, designed to enable the firm ... effectively. a. Inspection b. Monitoring c. Peer review d. Engagement quality control review

Last Answer : Monitoring

The RTS and CTS frames in CSMA/CA ____ solvethe hidden stationproblem. The RTS and CTS frames in CSMA/CA ____ solve the exposed station problem. A) can; cannot B) cannot; can C) can; can D) cannot; cannot

Description : The RTS and CTS frames in CSMA/CA ____ solvethe hidden stationproblem. The RTS and CTS frames in CSMA/CA ____ solve the exposed station problem. A) can; cannot B) cannot; can C) can; can D) cannot; cannot

Last Answer : can; cannot

The IEEE 802.11 wireless LANs use ________ types of frames. A) four B) five C) six D) none of the above

Description : The IEEE 802.11 wireless LANs use ________ types of frames. A) four B) five C) six D) none of the above

Last Answer : none of the above

A ________bridge can forward and filter frames andautomatically buildits forwarding table. A) simple B) dual C) transparent D) none of the above

Description : A ________bridge can forward and filter frames andautomatically buildits forwarding table. A) simple B) dual C) transparent D) none of the above

Last Answer : transparent

In________framing, we need adelimiter (flag) to define the boundary of two frames. A) fixed-size B) variable-size C) standard D) none of the above

Description : In________framing, we need adelimiter (flag) to define the boundary of two frames. A) fixed-size B) variable-size C) standard D) none of the above

Last Answer : variable-size

In_______framing, there isno need for defining the boundariesof frames. A) fixed-size B) variable-sizeC) standard D) none of the above

Description : In_______framing, there isno need for defining the boundariesof frames. A) fixed-size B) variable-size C) standard D) none of the above

Last Answer : none of the above

Inthe _________ protocol weavoid unnecessary transmissionby sending only frames that are corrupted. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Description : Inthe _________ protocol weavoid unnecessary transmissionby sending only frames that are corrupted. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Last Answer : Selective-Repeat ARQ