Which type of Sframe in HDLC exhibit the correspondence of last three bits [N(R)] by defining the negative acknowledgement (NAK) number with the code value of '01'? a. Receive ready b. Receive not ready c. Reject d. Selective Reject

Which type of Sframe in HDLC exhibit the
correspondence of last three bits [N(R)] by
defining the negative acknowledgement
(NAK) number with the code value of '01'?
a. Receive ready
b. Receive not ready
c. Reject
d. Selective Reject
by

1 Answer

Answer :

c. Reject
by

Related questions

the maximum window size for data transmission using the selective reject protocol with n-bit frame sequence numbers is: a. 2^n b. 2^(n-1) c. 2^n – 1 d. 2^(n-2)

Description : the maximum window size for data transmission using the selective reject protocol with n-bit frame sequence numbers is: a. 2^n b. 2^(n-1) c. 2^n – 1 d. 2^(n-2)

Last Answer : b. 2^(n-1)

Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard synchronous communication protocol. c. RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Description : Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard ... indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Last Answer : RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

Which category of HDLC frames undergoes error and flow control mechanisms by comprising send and receive sequence numbers? a. Uframes b. Iframes c. Sframes d. All of the above

Description : Which category of HDLC frames undergoes error and flow control mechanisms by comprising send and receive sequence numbers? a. Uframes b. Iframes c. Sframes d. All of the above

Last Answer : Sframes

In Go-Back-N ARQ, if 5 is the number of bits for thesequencenumber, then the maximum size of the receive window mustbe _____ A) 15 B) 16 C) 31 D) 1

Description : In Go-Back-N ARQ, if 5 is the number of bits for thesequencenumber, then the maximum size of the receive window mustbe _____ A) 15 B) 16 C) 31 D) 1

Last Answer : 1

The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channelcapacity. Assuming that processing delay is negligible, the minimum number of bits for the sequence number field in a frame for maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Description : The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channel capacity. Assuming that processing ... maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Last Answer : c. C

In Selective Repeat ARQ, if 5 is the number ofbits for the sequence number, then the maximum size of the receive window mustbe _____ A) 15 B) 16 C) 31 D) 1

Description : In Selective Repeat ARQ, if 5 is the number ofbits for the sequence number, then the maximum size of the receive window mustbe _____ A) 15 B) 16 C) 31 D) 1

Last Answer : 16

We addr redundant bits toeach block to make thelength n = k + r. The resultingn-bit blocksare called _________. A) datawords B) blockwords C) codewords D) none of the above

Description : We addr redundant bits toeach block to make thelength n = k + r. The resultingn-bit blocksare called _________. A) datawords B) blockwords C) codewords D) none of the above

Last Answer : codewords

We add r redundant bits to each block to make the length n = k + r. The resulting n-bit blocks are called _________ A. datawords B. blockwords C. codewords D. none of the above

Description : We add r redundant bits to each block to make the length n = k + r. The resulting n-bit blocks are called _________ A. datawords B. blockwords C. codewords D. none of the above

Last Answer : C. codewords

_____defines a protocol data unit (PDU) that is somewhat similar to that of HDLC. A) MAC B) LLC C) LLU D) none of the above

Description : _____defines a protocol data unit (PDU) that is somewhat similar to that of HDLC. A) MAC B) LLC C) LLU D) none of the above

Last Answer : LLC

HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Description : HDLC isan acronym for _______. A) High-duplex line communication B) High-leveldata link control C) Half-duplex digital link combination D) Hostdouble-level circuit

Last Answer : High-leveldata link control

High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Description : High-level Data Link Control (HDLC) is a _______ protocol for communication over point-to-pointand multipoint links. A) bit-oriented B) byte-oriented C) character-oriented D) none of the above

Last Answer : bit-oriented

Which operational mode/s of HDLC support/s the balanced configuration by governing point to point link connectivity in addition to the primary as well as secondary functions performed by the station?a. NRM b. ABM c. Both a & b d. None of the above

Description : Which operational mode/s of HDLC support/s the balanced configuration by governing point to point link connectivity in addition to the primary as well as secondary functions performed by the station? a. NRM b. ABM c. Both a & b d. None of the above

Last Answer : b. ABM

Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC

Description : Which of the following is the multiple access protocol for channel access control? a. CSMA/CD b. CSMA/CA c. Both CSMA/CD & CSMA/CA d. HDLC

Last Answer : c. Both CSMA/CD & CSMA/CA

Which of the following is a data link protocol? a. ethernet b. point to point protocol c. hdlc d. all of the mentioned

Description : Which of the following is a data link protocol? a. ethernet b. point to point protocol c. hdlc d. all of the mentioned

Last Answer : d. all of the mentioned

Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for Modems) b. Frame Relay protocol as LAPF (Link Access Procedure for Frame Relay) c. ISDN (Integrated Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Description : Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for ... Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Last Answer : d. All the above

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Description : ………………...is a minimal protocol that allows isolated hosts to link via TCP/IP over the telephone network and ………………..uses a proposed international standard for transmitting HDLC over asynchronous lines. A. LCP, PPP B. PPP, LCP C. SLIP, PPP D. PPP, SLIP

Last Answer : C. SLIP, PPP

Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Description : Data Link Control Protocol (HDLC) is implemented at the ……… A. Data link layer B. Network layer C. transport layer D. Physical layer

Last Answer : A. receive sliding window.

Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC

Description : Which of the following is the multiple access protocol for channel access control? A. CSMA/CD B. CSMA/CA C. Both CSMA/CD & CSMA/CA D. HDLC

Last Answer : C. Both CSMA/CD & CSMA/CA

Explain about HDLC

Description : Explain about HDLC

Last Answer : Station types: _ Primary station _ Secondary station Configurations: _ Unbalanced configuration _ Symmetrical configuration _ Balanced configuration Modes of communication: _ Normal Response Mode ... Flag field _ Address field _ Control field _ Information field _ FCS field

Which provision can resolve / overcome the shortcomings associated with duplication or failure condition of Stop and Wait Automatic Repeat Request protocol especially due to loss of data frames or non reception of acknowledgement? a. Provision of sequence number in the header of message b. Provision of checksum computation c. Both a & b d. None of the above

Description : Which provision can resolve / overcome the shortcomings associated with duplication or failure condition of Stop and Wait Automatic Repeat Request protocol especially due to loss of data frames or non reception ... message b. Provision of checksum computation c. Both a & b d. None of the above

Last Answer : Provision of sequence number in the header of message

A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is A. 8.0 bit B. 2.0 bit C. 1.9 bit D. 2.1 bit

Description : A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is A. 8.0 bit B. 2.0 bit C. 1.9 bit D. 2.1 bit

Last Answer : C. 1.9 bit

A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is a. 8.0 bit b. 2.0 bit c. 1.9 bit d. 2.1 bit

Description : A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is a. 8.0 bit b. 2.0 bit c. 1.9 bit d. 2.1 bit

Last Answer : c. 1.9 bit

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errorsd. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

Which consequences are more likely to occur during the frame transmission in StopandWait ARQ mechanism? a. Loss of frame or an acknowledgementb. Delay in an acknowledgement c. Normal operation d. All of the above

Description : Which consequences are more likely to occur during the frame transmission in StopandWait ARQ mechanism? a. Loss of frame or an acknowledgement b. Delay in an acknowledgement c. Normal operation d. All of the above

Last Answer : d. All of the above

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

Number of bits per symbol used in Baudot code is a. 7 b. 5 c. 8d. 9

Description : Number of bits per symbol used in Baudot code is a. 7 b. 5 c. 8 d. 9

Last Answer : 5

The ________ between two words is the number ofdifferences between corresponding bits. A) Hamming code B) Hamming distance C) Hamming rule D) none of the above

Description : The ________ between two words is the number ofdifferences between corresponding bits. A) Hamming code B) Hamming distance C) Hamming rule D) none of the above

Last Answer : Hamming distance

_______ can detect burst error of length less than or equal to degree of the polynomial and detects burst errors that affect odd number of bits. a. Hamming Code b. CRC c. VRC d. None of the above

Description : _______ can detect burst error of length less than or equal to degree of the polynomial and detects burst errors that affect odd number of bits. a. Hamming Code b. CRC c. VRC d. None of the above

Last Answer : b. CRC

The ________ between two words is the number of differences between corresponding bits A. Hamming code B. Hamming distance C. Hamming rule D. none of the above

Description : The ________ between two words is the number of differences between corresponding bits A. Hamming code B. Hamming distance C. Hamming rule D. none of the above

Last Answer : B. Hamming distance

Both Go-Back-N and Selective-Repeat Protocols use a_________. A) sliding frame B) sliding windowC)sliding packetD)none of the above

Description : Both Go-Back-N and Selective-Repeat Protocols use a_________. A) sliding frame B) sliding window C) sliding packet D) none of the above

Last Answer : sliding window

Inthe _________ protocol weavoid unnecessary transmissionby sending only frames that are corrupted. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Description : Inthe _________ protocol weavoid unnecessary transmissionby sending only frames that are corrupted. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Last Answer : Selective-Repeat ARQ

Inthe _________Protocol, ifno acknowledgment for aframe has arrived, we resend all outstanding frames. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Description : Inthe _________Protocol, ifno acknowledgment for aframe has arrived, we resend all outstanding frames. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Last Answer : Go-Back-N ARQ

The _________Protocol, addsa simple error control mechanism to the _______Protocol. A) Stop-and-Wait ARQ; Stop-and-Wait B) Go-Back-N ARQ; Stop-and-Wait C) Selective Repeat ARQ; Go-Back-N ARQ D) none of the above

Description : The _________Protocol, addsa simple error control mechanism to the _______Protocol. A) Stop-and-Wait ARQ; Stop-and-Wait B) Go-Back-N ARQ; Stop-and-Wait C) Selective Repeat ARQ; Go-Back-N ARQ D) none of the above

Last Answer : Go-Back-N ARQ; Stop-and-Wait

Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Description : Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Last Answer : Stop-and-Wait

Inthe _____ Protocol, the sender sends its frames oneafter another with noregard to the receiver. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Description : Inthe _____ Protocol, the sender sends its frames oneafter another with noregard to the receiver. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Last Answer : Stop-and-Wait B) Simplest

In Go-Back-N window, when the timer of the packet times out, several packets have to be resent even some may have arrived safe. Whereas in Selective Repeat window, the sender resends ___________ A. Packet which are not lost B. Only those packets which are lost or corrupted C. Packet from starting D. All the packets

Description : In Go-Back-N window, when the timer of the packet times out, several packets have to be resent even some may have arrived safe. Whereas in Selective Repeat window, the sender resends ___________ A ... lost B. Only those packets which are lost or corrupted C. Packet from starting D. All the packets

Last Answer : B. Only those packets which are lost or corrupted

In Go-Back-N ARQ, if 5 is the number of bits for thesequencenumber, then the maximum size of the send window must be _____ A) 15 B) 16 C) 31 D) 1

Description : In Go-Back-N ARQ, if 5 is the number of bits for thesequencenumber, then the maximum size of the send window must be _____ A) 15 B) 16 C) 31 D) 1

Last Answer : 31

Which of the following summation operations is performed onthe bits to checkanerror-detecting code? A. Codec B. Coder-decoder C. Checksum D. Attenuation

Description : Which of the following summation operations is performed onthe bits to checkanerror-detecting code? A. Codec B. Coder-decoder C. Checksum D. Attenuation

Last Answer : Checksum

Let C be a binary linear code with minimum distance 2t + 1 then it can correct upto _____ bits of error. a. t + 1 b. t c. t - 2 d. t / 2

Description : Let C be a binary linear code with minimum distance 2t + 1 then it can correct upto _____ bits of error. a. t + 1 b. t c. t - 2 d. t / 2

Last Answer : b. t

The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : DSSS

Out of (a) 0.01 M KNO3 , (b) 0.01 M Na2 SO4 which aqueous soln. will exhibit high B. P.?

Description : Out of (a) 0.01 M KNO3 , (b) 0.01 M Na2 SO4 which aqueous soln. will exhibit high B. P.?

Last Answer : (a) 0.01 M Na2 SO4

In_______framing, there isno need for defining the boundariesof frames. A) fixed-size B) variable-sizeC) standard D) none of the above

Description : In_______framing, there isno need for defining the boundariesof frames. A) fixed-size B) variable-size C) standard D) none of the above

Last Answer : none of the above

In _______ framing, there is no need for defining the boundaries of frames. A. fixed-size B. variable-size C. standard D. none of the above

Description : In _______ framing, there is no need for defining the boundaries of frames. A. fixed-size B. variable-size C. standard D. none of the above

Last Answer : A. fixed-size

By defining the _ __ register as last in first out stack the sequence can handle nested subroutines: a. S b. J ce. R d. T

Description : By defining the _ __ register as last in first out stack the sequence can handle nested subroutines: a. S b. J ce. R d. T

Last Answer : ce. R

. In addresses for _______ networks, the first 16 bits specify a particular network, and the last 16 bits specify a particular host. A. class A B. class C C. class B D. class D

Description : . In addresses for _______ networks, the first 16 bits specify a particular network, and the last 16 bits specify a particular host. A. class A B. class C C. class B D. class D

Last Answer : C. class B

A 8-Mbps tokenring has atoken holding timer value of 10 msec. What is the longest frame (assumeheader bits are negligible) that canbe sent on this ring? A. 8000 B frame B. 80,000 B frame C. 8 x 105 bit frame D. 10,000 B frame

Description : A 8-Mbps tokenring has atoken holding timer value of 10 msec. What is the longest frame (assumeheader bits are negligible) that canbe sent on this ring? A. 8000 B frame B. 80,000 B frame C. 8 x 105 bit frame D. 10,000 B frame

Last Answer : 10,000 B frame

condensing output data to exhibit specific information is a. calculating b. recording c. merging d. summarizing

Description : condensing output data to exhibit specific information is a. calculating b. recording c. merging d. summarizing

Last Answer : recording

Which URL method of HTTP performs similar function as that of PUT method only with an exception of request comprising a list of differences that exhibit thed. OPTION necessity to get implemented in the existing file? a. POST b. GET c. PATCH

Description : Which URL method of HTTP performs similar function as that of PUT method only with an exception of request comprising a list of differences that exhibit the necessity to get implemented in the existing file? a. POST b. GET c. PATCH d. OPTION

Last Answer : c. PATCH