A pitched-blade turbine draws __________ a straight blade turbine. (A) Less power than (B) More power than (C) Same power as (D) Data insufficient to predict

A pitched-blade turbine draws __________ a straight blade turbine.
(A) Less power than
(B) More power than
(C) Same power as
(D) Data insufficient to predict
by

1 Answer

Answer :

(A) Less power than
by

Related questions

Pick out the wrong statement pertaining to the turbine agitator. (A) Recommended peripheral speed for the turbine agitator is 200-250 metres/minute (B) Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow (C) Generally, the diameter of the agitator is kept between l/3rd to l/6th of the tank diameter while the blade length is l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter)

Description : Pick out the wrong statement pertaining to the turbine agitator. (A) Recommended peripheral speed for the turbine agitator is 200-250 metres/minute (B) Pitched blade turbine agitator gives only radial flow with ... l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter)

Last Answer : (B) Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow

The efficiency of an Otto engine compared to that of a diesel engine, for the same compression ratio will be (A) More (B) Less (C) Same (D) Data insufficient to predict

Description : The efficiency of an Otto engine compared to that of a diesel engine, for the same compression ratio will be (A) More (B) Less (C) Same (D) Data insufficient to predict

Last Answer : (A) More

A centrifugal pump used to pump water is used to pump an oil withspecific gravity of 0.8 at the same rate. The power consumption will now (A) Increase (B) Decrease (C) Remain same (D) Data insufficient to predict

Description : A centrifugal pump used to pump water is used to pump an oil withspecific gravity of 0.8 at the same rate. The power consumption will now (A) Increase (B) Decrease (C) Remain same (D) Data insufficient to predict

Last Answer : (B) Decrease

Reynolds number for water flow through a tube of I.D. 5 cm is 1500. If a liquid of 5 centipoise viscosity and 0.8 specific gravity flows in the same pipe at the same velocity, then the pressure drop will (A) Increase (B) Decrease (C) Remain same (D) Data insufficient to predict pressure drop

Description : Reynolds number for water flow through a tube of I.D. 5 cm is 1500. If a liquid of 5 centipoise viscosity and 0.8 specific gravity flows in the same pipe at the same velocity, then the pressure drop will (A) Increase (B) Decrease (C) Remain same (D) Data insufficient to predict pressure drop

Last Answer : (A) Increase

Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the first fluid, the pressure drop will (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Description : Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the ... (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Last Answer : (B) Decrease

Power loss in an orificemeter is __________ that in a Venturimeter. (A) Less than (B) Same as (C) More than (D) Data insufficient, cannot be predicted

Description : Power loss in an orificemeter is __________ that in a Venturimeter. (A) Less than (B) Same as (C) More than (D) Data insufficient, cannot be predicted

Last Answer : (C) More than

If the discharge of a centrifugal pump is throttled, then its suction lift (A) Increases (B) Decreases (C) Remains unchanged (D) Data insufficient to predict

Description : If the discharge of a centrifugal pump is throttled, then its suction lift (A) Increases (B) Decreases (C) Remains unchanged (D) Data insufficient to predict

Last Answer : (A) Increases

In a first order reaction, the time required to reduce the concentration of reactant from 1 mole/litre to 0.5 mole/litre will be __________ that requiredto reduce it from 10 moles/litre to 5 moles/litre in the same volume.(A) More than(B) Less than(C) Same as(D) Data insufficient; can't be predicted

Description : In a first order reaction, the time required to reduce the concentration of reactant from 1 mole/litre to 0.5 mole/litre will be __________ that requiredto reduce it from 10 moles/litre to 5 moles/litre in the ... (A) More than (B) Less than (C) Same as (D) Data insufficient; can't be predicted

Last Answer : (C) Same as

Both stearic acid and linoleic acid have 18 carbons. Linoleic acid is unsaturated, while stearic acid is saturated. The melting point of stearic acid : (a) is higher than linoleic acid (b) is lower than linoleic acid (c) is same as linoleic acid (d) can not predict, insufficient information

Description : Both stearic acid and linoleic acid have 18 carbons. Linoleic acid is unsaturated, while stearic acid is saturated. The melting point of stearic acid : (a) is higher than linoleic acid (b) is lower than linoleic acid (c) is same as linoleic acid (d) can not predict, insufficient information

Last Answer : is higher than linoleic acid

The activity of an ideal gas is numerically __________ its pressure. (A) More than (B) Less than (C) Equal to (D) Data insufficient, can't be predicted

Description : The activity of an ideal gas is numerically __________ its pressure. (A) More than (B) Less than (C) Equal to (D) Data insufficient, can't be predicted

Last Answer : (C) Equal to

Highly viscous liquids & pastes are agitated by (A) Propellers (B) Turbine agitators (C) Multiple blade paddles (D) None of these

Description : Highly viscous liquids & pastes are agitated by (A) Propellers (B) Turbine agitators (C) Multiple blade paddles (D) None of these

Last Answer : (C) Multiple blade paddles

Which of the following agitators having a large blade area, rotating at slow speed is used for mixing high viscosity liquids (> 50000 centipoise)? (A) Propeller(B) Helical screw(C) Flat blade turbine(D) Curved blade turbine

Description : Which of the following agitators having a large blade area, rotating at slow speed is used for mixing high viscosity liquids (> 50000 centipoise)? (A) Propeller (B) Helical screw (C) Flat blade turbine (D) Curved blade turbine

Last Answer : (B) Helical screw

A jet engine turbine blade is normally manufactured by (A) Forging (B) Shell moulding (C) Investment casting (D) Pressure die casting

Description : A jet engine turbine blade is normally manufactured by (A) Forging (B) Shell moulding (C) Investment casting (D) Pressure die casting

Last Answer : (C) Investment casting

At the same gas flow rate, the pressure drop in a packed tower being irrigated with liquid __________ that in dry packed tower. (A) Is greater than (B) Is lower than (C) Is same as (D) Cannot be predicted as data are insufficient

Description : At the same gas flow rate, the pressure drop in a packed tower being irrigated with liquid __________ that in dry packed tower. (A) Is greater than (B) Is lower than (C) Is same as (D) Cannot be predicted as data are insufficient

Last Answer : (A) Is greater than

A fuel containing carbon and carbon monoxide (but containing no hydrogen or its compounds) is burnt in pure oxygen at constant pressure. Its gross calorific value as compared to net calorific value will be (A) More (B) Less (C) Same (D) Data insufficient; can't be predicted

Description : A fuel containing carbon and carbon monoxide (but containing no hydrogen or its compounds) is burnt in pure oxygen at constant pressure. Its gross calorific value as compared to net calorific value will be (A) More (B) Less (C) Same (D) Data insufficient; can't be predicted

Last Answer : (C) Same

How long are the blade on a wind turbine?

Description : How long are the blade on a wind turbine?

Last Answer : Feel Free to Answer

How long is a wind turbine rotor blade?

Description : How long is a wind turbine rotor blade?

Last Answer : Feel Free to Answer

A turbine is said to have an axial discharge when the steam leaves the blade tip at _________ to the direction of the blade motion. (A) 60° (B) 90° (C) 180° (D) 270°

Description : A turbine is said to have an axial discharge when the steam leaves the blade tip at _________ to the direction of the blade motion. (A) 60° (B) 90° (C) 180° (D) 270°

Last Answer : (B) 90°

The isentropic enthalpy drop in moving blade is two-third of the isentropic enthalpy drop in fixed blades of a turbine. The degree of reaction will be (A) 0.4 (B) 0.56 (C) 0.67 (D) 1.67

Description : The isentropic enthalpy drop in moving blade is two-third of the isentropic enthalpy drop in fixed blades of a turbine. The degree of reaction will be (A) 0.4 (B) 0.56 (C) 0.67 (D) 1.67

Last Answer : (A) 0.4

The effect of changing the evaporator temperature on COP as compared to that of changing the condenser temperature (in vapour compression refrigeration system) is (A) Less pronounced (B) More pronounced (C) Equal (D) Data insufficient, can't be predicted

Description : The effect of changing the evaporator temperature on COP as compared to that of changing the condenser temperature (in vapour compression refrigeration system) is (A) Less pronounced (B) More pronounced (C) Equal (D) Data insufficient, can't be predicted

Last Answer : (B) More pronounced

Sensible heat absorbed by 1 lb of water when it is heated from 32 to 212°F may be around __________ BTU. (A) 180 (B) 970 (C) 3.97 (D) Data insufficient, can't be predicted

Description : Sensible heat absorbed by 1 lb of water when it is heated from 32 to 212°F may be around __________ BTU. (A) 180 (B) 970 (C) 3.97 (D) Data insufficient, can't be predicted

Last Answer : (A) 180

Rate determining step in a reaction consisting of a number of steps inseries is the __________ step.(A) Fastest(B) Slowest(C) Intermediate(D) Data insufficient; can't be predicted

Description : Rate determining step in a reaction consisting of a number of steps inseries is the __________ step. (A) Fastest (B) Slowest (C) Intermediate (D) Data insufficient; can't be predicted

Last Answer : (B) Slowest

A cylinder contains 640 gm of liquid oxygen. The volume occupied (in litres) by the oxygen, when it is released and brought to standard conditions (0°C, 760 mm Hg) will be __________ litres. (A) 448 (B) 224 (C) 22.4 (D) Data insufficient; can't be computed

Description : A cylinder contains 640 gm of liquid oxygen. The volume occupied (in litres) by the oxygen, when it is released and brought to standard conditions (0°C, 760 mm Hg) will be __________ litres. (A) 448 (B) 224 (C) 22.4 (D) Data insufficient; can't be computed

Last Answer : (A) 448

Which molecule allows a blade of of grass to stand up straight?

Description : Which molecule allows a blade of of grass to stand up straight?

Last Answer : Cellulose, lignin, hemi-cellulose and fibres are all molecules in the structure of the plant cell wall that makes the plant (in this case a blade of grass) stand up straight. Polysaccharide

For operating rotavator in trashy soils, which lines are better? (a) L-shaped (b) Hook shaped (c) Backward curved (d) Straight blade

Description : For operating rotavator in trashy soils, which lines are better? (a) L-shaped (b) Hook shaped (c) Backward curved (d) Straight blade

Last Answer : (a) L-shaped

Following is not type of blades ? a) ‗L‘ type blade. c) Twisted blade b) ‗M‘ type blade. d) Straight blade

Description : Following is not type of blades ? a) ‗L‘ type blade. c) Twisted blade b) ‗M‘ type blade. d) Straight blade

Last Answer : M‘ type blade.

It is employed on mulchers designed mainly for secondary Tillage. a. ‗L‘ type blade c) straight blade b. Twisted blade d) dics blade

Description : It is employed on mulchers designed mainly for secondary Tillage. a. ‗L‘ type blade c) straight blade b. Twisted blade d) dics blade

Last Answer : straight blade

Blade that works well in trashy conditions . a) Twisted blade b) Straight blade c) L type d) None of the above

Description : Blade that works well in trashy conditions . a) Twisted blade b) Straight blade c) L type d) None of the above

Last Answer :    <!-- [endif] -->L type

For operating rotavator on trashy soils which tines are better: A L-shaped B.Hook shaped C.Backward curved tip twist blade D.Straight blade

Description : For operating rotavator on trashy soils which tines are better: A L-shaped B.Hook shaped C.Backward curved tip twist blade D.Straight blade

Last Answer : A L-shaped

__________ is used as a material of construction for the blade of power saw. (A) Wrought iron (B) Stainless steel (C) Mild steel (D) High speed steel

Description : __________ is used as a material of construction for the blade of power saw. (A) Wrought iron (B) Stainless steel (C) Mild steel (D) High speed steel

Last Answer : Option D

. For the same feed, feed quality and separation (in a distillation column), with the increase of total pressure, the number of ideal plates will (A) Increase (B) Decrease (C) Remain same (D) Data insufficient, can't be predicted

Description : . For the same feed, feed quality and separation (in a distillation column), with the increase of total pressure, the number of ideal plates will (A) Increase (B) Decrease (C) Remain same (D) Data insufficient, can't be predicted

Last Answer : (A) Increase

A first order reaction requires two unequal sized CSTR. Which of thefollowing gives higher yield?(A) Large reactor followed by smaller one(B) Smaller reactor followed by larger one(C) Either of the arrangement (A) or (B) will give the same yield(D) Data insufficient, can't be predicted

Description : A first order reaction requires two unequal sized CSTR. Which of thefollowing gives higher yield? (A) Large reactor followed by smaller one (B) Smaller reactor followed by larger one (C) Either of the arrangement (A) or (B) will give the same yield (D) Data insufficient, can't be predicted

Last Answer : (C) Either of the arrangement (A) or (B) will give the same yield

With increase in the space time of an irreversible isothermal reaction being carried out in a P.F. reactor, the conversion will (A) Increase (B) Decrease (C) Remain same (D) Data in insufficient; can't be predicted

Description : With increase in the space time of an irreversible isothermal reaction being carried out in a P.F. reactor, the conversion will (A) Increase (B) Decrease (C) Remain same (D) Data in insufficient; can't be predicted

Last Answer : (A) Increase

With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Description : With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Last Answer : (A) Higher in P.F. reactor

Which of the following statements is correct concerning the motor performance curves and data table shown in the illustration? EL-0006 A. The motor RPM at full load is 1737 RPM. B. The motor draws 12.62 kw from the switchboard when operating at full load. C. If the motor was developing 10 HP its power factor would be 0.92. D. All of the above.

Description : Which of the following statements is correct concerning the motor performance curves and data table shown in the illustration? EL-0006 A. The motor RPM at full load is 1737 RPM. B. The motor draws 12.62 kw ... If the motor was developing 10 HP its power factor would be 0.92. D. All of the above.

Last Answer : Answer: D

The blades of a centrifugal impeller are said to be curved forward, if the __________ of the motion of impeller blades. (A) Inlet tip of a blade curves in a direction opposite to that (B) Outlet tip of a blade curves in a direction opposite to that (C) Inlet tip of a blade is towards the direction (D) Outlet tip of a blade is towards the direction

Description : The blades of a centrifugal impeller are said to be curved forward, if the __________ of the motion of impeller blades. (A) Inlet tip of a blade curves in a direction opposite to that (B) Outlet tip ... Inlet tip of a blade is towards the direction (D) Outlet tip of a blade is towards the direction

Last Answer : (D) Outlet tip of a blade is towards the direction

One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Description : One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Last Answer : (B) Evaporate the water

A chemical reaction, A → 3B, is conducted in a constant pressure vessel. Starting with pure A, the volume of the reaction mixture increases 3 times in 6 minutes. The fractional conversion is (A) 0.33 (B) 0.5 (C) 1 (D) Data insufficient, can't be predicted

Description : A chemical reaction, A → 3B, is conducted in a constant pressure vessel. Starting with pure A, the volume of the reaction mixture increases 3 times in 6 minutes. The fractional conversion is (A) 0.33 (B) 0.5 (C) 1 (D) Data insufficient, can't be predicted

Last Answer : (C) 1

The conversion of a reactant, undergoing a first order reaction, at a time equal to three times the half life of the reaction is: (A) 0.875 (B) 0.5 (C) 0.425 (D) Data insufficient to calculate

Description : The conversion of a reactant, undergoing a first order reaction, at a time equal to three times the half life of the reaction is: (A) 0.875 (B) 0.5 (C) 0.425 (D) Data insufficient to calculate

Last Answer : (A) 0.875

Grams of butane (C4H10 ) formed by the liquefaction of 448 litres of the gas (measured at (STP) would be (A) 580 (B) 640 (C) 1160 (D) Data insufficient; can't be computed

Description : Grams of butane (C4H10 ) formed by the liquefaction of 448 litres of the gas (measured at (STP) would be (A) 580 (B) 640 (C) 1160 (D) Data insufficient; can't be computed

Last Answer : (C) 1160

As the time is passing, entropy of the universe (A) Is increasing (B) Is decreasing (C) Remain constant (D) Data insufficient, can't be predicted

Description : As the time is passing, entropy of the universe (A) Is increasing (B) Is decreasing (C) Remain constant (D) Data insufficient, can't be predicted

Last Answer : (A) Is increasing

In vapour compression refrigeration system, if the evaporator temperature and the condenser temperatures are -13°C and 37°C respectively, the Carnot COP will be (A) 5.2 (B) 6.2 (C) 0.168 (D) Data insufficient, can't be found out

Description : In vapour compression refrigeration system, if the evaporator temperature and the condenser temperatures are -13°C and 37°C respectively, the Carnot COP will be (A) 5.2 (B) 6.2 (C) 0.168 (D) Data insufficient, can't be found out

Last Answer : A) 5.2

For an isothermal process, the internal energy of a gas (A) Increases (B) Decreases (C) Remains unchanged (D) Data insufficient, can't be predicted

Description : For an isothermal process, the internal energy of a gas (A) Increases (B) Decreases (C) Remains unchanged (D) Data insufficient, can't be predicted

Last Answer : (C) Remains unchanged

A refrigeration cycle is the same as a __________ cycle, (A) Turbine (B) Heat engine (C) Reversed heat engine (D) None of these

Description : A refrigeration cycle is the same as a __________ cycle, (A) Turbine (B) Heat engine (C) Reversed heat engine (D) None of these

Last Answer : C) Reversed heat engine

The average marks obtained by a student in Tamil, english, maths, science, and social together is 65% above the average mark obtained in maths and science together. How many more marks exceeded by the average of maths and science together than the sum of the tamil and english together? A) 50 B) 65 C) Data insufficient D) None of these

Description : The average marks obtained by a student in Tamil, english, maths, science, and social together is 65% above the average mark obtained in maths and science together. How many more marks exceeded by the average of ... of the tamil and english together? A) 50 B) 65 C) Data insufficient D) None of these

Last Answer : C) According to the question  There is no other information about the marks in any one of the subject. The data gives is insufficient to answer the question.

Which of the following is characteristic of an MIS? (A) Provides guidance in identifying problems, finding and evaluating alternative solutions, and selecting or comparing alternatives. (B) Draws on diverse yet predictable data resources to aggregate and summarize data. (C) High volume, data capture focus. (D) Has as its goal the efficiency of data movement and processing and interfacing different TPS.

Description : Which of the following is characteristic of an MIS? (A) Provides guidance in identifying problems, finding and evaluating alternative solutions, and selecting or comparing alternatives. (B) Draws on ... Has as its goal the efficiency of data movement and processing and interfacing different TPS. 

Last Answer : (B) Draws on diverse yet predictable data resources to aggregate and summarize data.

The angle of blade for closed curettage is:** A. Less than 35 degree B. Less than 45 degree C. Less than 90 degree D. Less than 100 degree

Description : The angle of blade for closed curettage is:** A. Less than 35 degree B. Less than 45 degree C. Less than 90 degree D. Less than 100 degree

Last Answer : C. Less than 90 degree

Chemical kinetics can predict the __________ of a chemical reaction. (A) Rate (B) Feasibility (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Chemical kinetics can predict the __________ of a chemical reaction. (A) Rate (B) Feasibility (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Rate

At any point on the saturation curve in psychometric chart, the dry bulb temperature is always A. less than the corresponding wet bulb temperature B. more than the corresponding wet bulb temperature C. equal to the corresponding wet bulb temperature D. cannot predict

Description : At any point on the saturation curve in psychometric chart, the dry bulb temperature is always A. less than the corresponding wet bulb temperature B. more than the corresponding wet bulb temperature C. equal to the corresponding wet bulb temperature D. cannot predict

Last Answer : ANSWER : C

What is the value of shear stress acting on a plane of circular bar which is subjected to axial tensile load of 100 kN? (Diamet a. 58.73 Mpa b. 40.23 Mpa c. 39.60 Mpa d. Insufficient data

Description : What is the value of shear stress acting on a plane of circular bar which is subjected to axial tensile load of 100 kN? (Diamet a. 58.73 Mpa b. 40.23 Mpa c. 39.60 Mpa d. Insufficient data

Last Answer : c. 39.60 Mpa