For flow of fluids through packed bed, the superficial velocity is (A) Less than the average velocity through channels (B) More than the average velocity through channels (C) Dependent on the pressure drop across the bed (D) Same as the average velocity through channels

For flow of fluids through packed bed, the superficial velocity is
(A) Less than the average velocity through channels
(B) More than the average velocity through channels
(C) Dependent on the pressure drop across the bed
(D) Same as the average velocity through channels
by

1 Answer

Answer :

(A) Less than the average velocity through channels
by

Related questions

For liquid flow through a packed bed, the superficial velocity as compared to average velocity through the channel in the bed is (A) More (B) Less (C) Equal (D) Independent of porosity

Description : For liquid flow through a packed bed, the superficial velocity as compared to average velocity through the channel in the bed is (A) More (B) Less (C) Equal (D) Independent of porosity

Last Answer : (B) Less

A gas (density = 1.5 kg/m3 , viscosity = 2 × 10 ‒5 kg/m.s) flowing through a packed bed (particle size = 0.5 cm, porosity = 0.5) at a superficial velocity of 2 m/s causes a pressure drop of 8400 Pa/m. The pressure drop for another gas, with density of 1.5 kg/m3and viscosity of 3 × 10 ‒5kg/m.s flowing at 3 m/s will be (A) 8400 Pa/m (B) 12600 Pa/m (C) 18900 Pa/m (D) 16800 Pa/m

Description : A gas (density = 1.5 kg/m3 , viscosity = 2 10 -5 kg/m.s) flowing through a packed bed (particle size = 0.5 cm, porosity = 0.5) at a superficial velocity of 2 m/s causes a pressure drop of 8400 Pa/m. The ... flowing at 3 m/s will be (A) 8400 Pa/m (B) 12600 Pa/m (C) 18900 Pa/m (D) 16800 Pa/m

Last Answer : (B) 12600 Pa/m

For laminar flow of a fluid through a packed bed of spheres of diameter d, the pressure drop per unit length of bed depends upon the sphere diameter as (A) d (B) d 2 (C) d 4 (D) d

Description : For laminar flow of a fluid through a packed bed of spheres of diameter d, the pressure drop per unit length of bed depends upon the sphere diameter as (A) d (B) d 2 (C) d 4 (D) d

Last Answer : (D) d

Pick out the correct statement. (A) For identical gas flow rates, less pressure drop occurs through a plate tower than through a packed tower (B) Plate column can handle greater liquid loads without flooding than packed column, but the liquid hold up is more in the case of plate column (C) For the same duty, plate columns weigh less than packed columns (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) For identical gas flow rates, less pressure drop occurs through a plate tower than through a packed tower (B) Plate column can handle greater liquid loads without flooding than packed ... duty, plate columns weigh less than packed columns (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For laminar flow of Newtonian fluids through a circular pipe, for a given pressure drop and length & diameter of pipe, the velocity of fluid is proportional to (where, μ = fluid viscosity ) (A) μ (B) 1/μ (C) √μ (D) 1/√μ

Description : For laminar flow of Newtonian fluids through a circular pipe, for a given pressure drop and length & diameter of pipe, the velocity of fluid is proportional to (where, μ = fluid viscosity ) (A) μ (B) 1/μ (C) √μ (D) 1/√μ

Last Answer : (B) 1/μ

Pressure drop in a fluidised bed reactor is __________ that in a similar packed bed reactor. (A) Less than (B) Greater than (C) Same as (D) None of these

Description : Pressure drop in a fluidised bed reactor is __________ that in a similar packed bed reactor. (A) Less than (B) Greater than (C) Same as (D) None of these

Last Answer : (B) Greater than

Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments (B) Pressure drop in the equipment will be very high (C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Description : Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the ... C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Last Answer : (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments

In a packed bed absorption column, the channelling will be noted by the (A) Increase in flow rate (B) Sharp drop in pressure drop (C) Sharp rise in pressure drop (D) None of these

Description : In a packed bed absorption column, the channelling will be noted by the (A) Increase in flow rate (B) Sharp drop in pressure drop (C) Sharp rise in pressure drop (D) None of these

Last Answer : (B) Sharp drop in pressure drop

Pressure drop in a packed bed for laminar flow is given by the __________ equation. (A) Kozeny-Carman (B) Blake-Plummer (C) Leva's (D) Fanning friction factor

Description : Pressure drop in a packed bed for laminar flow is given by the __________ equation. (A) Kozeny-Carman (B) Blake-Plummer (C) Leva's (D) Fanning friction factor

Last Answer : (A) Kozeny-Carman

In a dry packed bed, the pressure drop will be changed by increasing the flow rate as (A) V1.8 (B) V-0.8 (C) V (D) V-1

Description : In a dry packed bed, the pressure drop will be changed by increasing the flow rate as (A) V1.8 (B) V-0.8 (C) V (D) V-1

Last Answer : (A) V1.8

Pressure drop in packed bed for turbulent flow is given by the __________ equation. (A) Kozeny-Carman (B) Blake-Plummer (C) Leva's (D) Hagen-Poiseuille’s

Description : Pressure drop in packed bed for turbulent flow is given by the __________ equation. (A) Kozeny-Carman (B) Blake-Plummer (C) Leva's (D) Hagen-Poiseuille’s

Last Answer : (B) Blake-Plummer

With increase in the liquid flow rate at a fixed gas velocity in a randomly packed counter current gas-liquid absorption column, the gas pressure drop (A) Decreases (B) Remains unchanged (C) Increases (D) Decreases exponentially

Description : With increase in the liquid flow rate at a fixed gas velocity in a randomly packed counter current gas-liquid absorption column, the gas pressure drop (A) Decreases (B) Remains unchanged (C) Increases (D) Decreases exponentially

Last Answer : (C) Increases

Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the first fluid, the pressure drop will (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Description : Two fluids are flowing through two similar pipes of the same diameter. The Reynold's number is same. For the same flow rate if the viscosity of a fluid is reduced to half the value of the ... (A) Increase (B) Decrease (C) Remain unchanged (D) Data insufficient to predict relative pressure drop

Last Answer : (B) Decrease

Pressure drop through plate tower as compared to that through packed tower, for the same duty will be (A) Less (B) More (C) Equal (D) Either (A) or (B); depends on the packing height

Description : Pressure drop through plate tower as compared to that through packed tower, for the same duty will be (A) Less (B) More (C) Equal (D) Either (A) or (B); depends on the packing height

Last Answer : (B) More

At the same gas flow rate, the pressure drop in a packed tower being irrigated with liquid __________ that in dry packed tower. (A) Is greater than (B) Is lower than (C) Is same as (D) Cannot be predicted as data are insufficient

Description : At the same gas flow rate, the pressure drop in a packed tower being irrigated with liquid __________ that in dry packed tower. (A) Is greater than (B) Is lower than (C) Is same as (D) Cannot be predicted as data are insufficient

Last Answer : (A) Is greater than

he pressure drop per unit length of pipe incurred by a fluid 'X' flowing through pipe is Δp. If another fluid 'Y' having both the specific gravity & density just double of that of fluid 'X', flows through the same pipe at the same flow rate/average velocity, then the pressure drop in this case will be (A) Δp (B) 2Δp (C) Δp 2 (D) Δp/2

Description : he pressure drop per unit length of pipe incurred by a fluid 'X' flowing through pipe is Δp. If another fluid 'Y' having both the specific gravity & density just double of that of fluid 'X', flows through the same pipe ... then the pressure drop in this case will be (A) Δp (B) 2Δp (C) Δp 2 (D) Δp/2

Last Answer : (B) 2Δp

Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the possibility of tower wall collapse (B) Packed towers are preferred over plate towers for handling corrosive and foamy liquids (C) Diameter of randomly packed tower is normally more than 1.2 metres (D) Due to uneven supply and improper distribution of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Description : Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the ... of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Last Answer : (C) Diameter of randomly packed tower is normally more than 1.2 metres

Umf is the minimum fluidisation velocity for a bed of particles. An increase in the superficial gas velocity from 2 Umf to 2.5 Umf results in (all velocities are smaller than the entrainment velocity of the particles) nochange in the(A) Drag on particles(B) Drag on column walls(C) Bed height(D) Bed voidage

Description : Umf is the minimum fluidisation velocity for a bed of particles. An increase in the superficial gas velocity from 2 Umf to 2.5 Umf results in (all velocities are smaller than the entrainment velocity of the particles ... (A) Drag on particles (B) Drag on column walls (C) Bed height (D) Bed voidage

Last Answer : (C) Bed height

Extremely large or small volumes of fluids are generally best routed through the shell side of a shell and tube heat exchanger, because of the (A) Less corrosion problems (B) Flexibility possible in the baffle arrangement (C) Low pressure drop (D) High heat transfer co-efficient

Description : Extremely large or small volumes of fluids are generally best routed through the shell side of a shell and tube heat exchanger, because of the (A) Less corrosion problems (B) Flexibility possible in the baffle arrangement (C) Low pressure drop (D) High heat transfer co-efficient

Last Answer : (B) Flexibility possible in the baffle arrangement

Pick out the wrong statement. (A) Heat transfer by radiation cannot occur across an absolute volume (B) In case of a shell and tube heat exchanger, the pressure drop through the shell is proportional to the number of times the fluid crosses the bundle between baffles (C) Propagation velocity for travel of heat radiation through vacuum is equal to the velocity of the light (D) The amount of heat involved in the condensation or vaporisation of 1 kg of a fluid is the same

Description : Pick out the wrong statement. (A) Heat transfer by radiation cannot occur across an absolute volume (B) In case of a shell and tube heat exchanger, the pressure drop through the shell is ... The amount of heat involved in the condensation or vaporisation of 1 kg of a fluid is the same

Last Answer : (A) Heat transfer by radiation cannot occur across an absolute volume

A 2-4 heat exchanger involves (A) Only counter-flow of fluids (B) Only parallel-flow of fluids (C) Both counter and parallel-flow of the fluids (D) Smaller pressure drop compared to 1-2 exchanger

Description : A 2-4 heat exchanger involves (A) Only counter-flow of fluids (B) Only parallel-flow of fluids (C) Both counter and parallel-flow of the fluids (D) Smaller pressure drop compared to 1-2 exchanger

Last Answer : (C) Both counter and parallel-flow of the fluids

A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Description : A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Last Answer : (A) Incurs smaller pressure drop

In a shell and tube heat exchanger, (A) The temperature drops in the two fluids and the wall are proportional to individual resistances (B) The temperature drop is inversely proportional to the resistance across which the drop occurs (C) There is no relationship between temperature drop and resistance (D) The relationship is not generalised

Description : In a shell and tube heat exchanger, (A) The temperature drops in the two fluids and the wall are proportional to individual resistances (B) The temperature drop is inversely proportional to ... ) There is no relationship between temperature drop and resistance (D) The relationship is not generalised

Last Answer : (A) The temperature drops in the two fluids and the wall are proportional to individual resistances

Which of the following equations applies to the fluid flow through a packed bed for very large Reynolds number? (A) Fanning equation (B) Blake-Plummer equation (C) Hagen-Poiseuille equation (D) Kozeny-Carman equation

Description : Which of the following equations applies to the fluid flow through a packed bed for very large Reynolds number? (A) Fanning equation (B) Blake-Plummer equation (C) Hagen-Poiseuille equation (D) Kozeny-Carman equation

Last Answer : (B) Blake-Plummer equation

Which of the following equations is valid for laminar flow of a fluid through packed bed? (A) Fanning equation (B) Kozeny - Karman equation (C) Hagen-Poiseuille equation (D) Blake-Plummer equation

Description : Which of the following equations is valid for laminar flow of a fluid through packed bed? (A) Fanning equation (B) Kozeny - Karman equation (C) Hagen-Poiseuille equation (D) Blake-Plummer equation

Last Answer : (B) Kozeny - Karman equation

Reynolds number for water flow through a tube of I.D. 5 cm is 1500. If a liquid of 5 centipoise viscosity and 0.8 specific gravity flows in the same pipe at the same velocity, then the pressure drop will (A) Increase (B) Decrease (C) Remain same (D) Data insufficient to predict pressure drop

Description : Reynolds number for water flow through a tube of I.D. 5 cm is 1500. If a liquid of 5 centipoise viscosity and 0.8 specific gravity flows in the same pipe at the same velocity, then the pressure drop will (A) Increase (B) Decrease (C) Remain same (D) Data insufficient to predict pressure drop

Last Answer : (A) Increase

Which of the following same diameter columns gives lowest pressure drop per unit height? (A) Bubble-cap column (B) Sieve-plate column (C) Packed column (stacked)

Description : Which of the following same diameter columns gives lowest pressure drop per unit height? (A) Bubble-cap column (B) Sieve-plate column (C) Packed column (stacked)

Last Answer : (C) Packed column (stacked)

Use of raschig rings in place of crushed stones as packing in packed beds (other things being same) (A) Increases pressure drop, increases surface area (B) Increases pressure drop, decreases surface area (C) Decreases pressure drop, increases surface area (D) Decreases pressure drop, decreases surface area

Description : Use of raschig rings in place of crushed stones as packing in packed beds (other things being same) (A) Increases pressure drop, increases surface area (B) Increases pressure drop, decreases ... (C) Decreases pressure drop, increases surface area (D) Decreases pressure drop, decreases surface area

Last Answer : (C) Decreases pressure drop, increases surface area

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below : Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, the minimum fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle ... fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Last Answer : (B) 16 mm/s

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

Applying a pressure drop across a capillary results in a volumetric flow rate 'Q' under laminar flow conditions. The flow rate for the same pressure drop, in a capillary of the same length but half the radius is (A) Q/2 (B) Q/4 (C) Q/8 (D) Q/16

Description : Applying a pressure drop across a capillary results in a volumetric flow rate 'Q' under laminar flow conditions. The flow rate for the same pressure drop, in a capillary of the same length but half the radius is (A) Q/2 (B) Q/4 (C) Q/8 (D) Q/16

Last Answer : (D) Q/16

. A 0.5 m high bed made up of a 1 mm dia glass sphere (density 2500 kg/m3 ) is to be fluidised by water (density 1000 kg/m3 ). If at the point of incipient fluidisation, the bed voidage is 40%, the pressure drop across the bed is (A) 4.4 KPa (B) 2.94 KPa (C) 3.7 KPa (D) None of these

Description : . A 0.5 m high bed made up of a 1 mm dia glass sphere (density 2500 kg/m3 ) is to be fluidised by water (density 1000 kg/m3 ). If at the point of incipient fluidisation, the bed voidage is 40%, the pressure drop across the bed is (A) 4.4 KPa (B) 2.94 KPa (C) 3.7 KPa (D) None of these

Last Answer : (A) 4.4 KPa

Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the total volume to the volume of voids in the bed (C) Mach number in an incompressible fluid is always unity (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Description : Pick out the correct statement. (A) Fanning friction factor is inversely proportional to Reynolds number always (B) The property of a randomly packed bed (with raschig rings) is given by the ratio of the ... the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

Last Answer : (D) Mach number is given by the ratio of the speed of the fluid to that of sound in the fluid under conditions of flow

For a packed bed reactor; the presence of a long tail in the residence time distribution curve is an indication of: (A) Ideal plug flow (B) Bypass (C) Dead zone (D) Channelling

Description : For a packed bed reactor; the presence of a long tail in the residence time distribution curve is an indication of: (A) Ideal plug flow (B) Bypass (C) Dead zone (D) Channelling

Last Answer : (C) Dead zone

Fluid flow in a real packed bed can be approximated as __________ model. (A) Plug flow (B) Dispersion (C) Mixed flow (D) Tank in series

Description : Fluid flow in a real packed bed can be approximated as __________ model. (A) Plug flow (B) Dispersion (C) Mixed flow (D) Tank in series

Last Answer : (B) Dispersion

In case of staged packed bed reactors carrying out exothermic reaction, use (A) High recycle for pure gas (B) Plug flow for dilute liquid requiring no large preheating of feed (C) Cold shot operations for a dilute solution requiring large preheating to bring the stream upto the reaction temperature (D) All (A), (B) and (C)

Description : In case of staged packed bed reactors carrying out exothermic reaction, use (A) High recycle for pure gas (B) Plug flow for dilute liquid requiring no large preheating of feed (C) Cold shot operations for a ... preheating to bring the stream upto the reaction temperature (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Channelling in a packed tower results from the (A) High pressure drop (B) Maldistribution of liquid (C) Non-uniformity of packing (D) Both (B) and (C)

Description : Channelling in a packed tower results from the (A) High pressure drop (B) Maldistribution of liquid (C) Non-uniformity of packing (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Which of these columns incurs the lowest pressure drop? (A) Packed column (with stacked packing) (B) Packed column (with dumped packing) (C) Bubble plate column (D) Pulse column

Description : Which of these columns incurs the lowest pressure drop? (A) Packed column (with stacked packing) (B) Packed column (with dumped packing) (C) Bubble plate column (D) Pulse column

Last Answer : (A) Packed column (with stacked packing)

Stacked packing compared to dumped packing (A) Provides poorer contact between the fluids (B) Gives lower pressure drop (C) Both (A) and (B) (D) Gives higher pressure drop

Description : Stacked packing compared to dumped packing (A) Provides poorer contact between the fluids (B) Gives lower pressure drop (C) Both (A) and (B) (D) Gives higher pressure drop

Last Answer : (C) Both (A) and (B)

Under conditions of flooding in packed tower, the gas pressure drop (A) Decreases rapidly (B) Increases rapidly (C) Remain constant (D) Is maximum

Description : Under conditions of flooding in packed tower, the gas pressure drop (A) Decreases rapidly (B) Increases rapidly (C) Remain constant (D) Is maximum

Last Answer : (D) Is maximum

Out of the following gas-liquid contacting devices, for a given set of operating conditions, gas pressure drop is the least in __________ tower. (A) Wetted wall (B) Bubble cap (C) Perforated tray (D) Packed

Description : Out of the following gas-liquid contacting devices, for a given set of operating conditions, gas pressure drop is the least in __________ tower. (A) Wetted wall (B) Bubble cap (C) Perforated tray (D) Packed

Last Answer : (A) Wetted wall

Very tall packed towers are divided into series of beds to (A) Reduce the overall pressure drop (B) Avoid channelling (C) Reduce liquid hold-up (D) Avoid flooding

Description : Very tall packed towers are divided into series of beds to (A) Reduce the overall pressure drop (B) Avoid channelling (C) Reduce liquid hold-up (D) Avoid flooding

Last Answer : (B) Avoid channelling

The reason for preferring packed towers over plate towers in distillation practice is that the packed tower operation gives (A) Low pressure drop and high hold up (B) High pressure drop and low hold up (C) Low pressure drop and low hold up (D) High pressure drop and high hold up

Description : The reason for preferring packed towers over plate towers in distillation practice is that the packed tower operation gives (A) Low pressure drop and high hold up (B) High pressure drop and low hold ... C) Low pressure drop and low hold up (D) High pressure drop and high hold up

Last Answer : (C) Low pressure drop and low hold up

The main reason for dividing a tall packed tower into series of small towers is to (A) Minimise the overall pressure drop (B) Avoid flooding (C) Reduce liquid hold up (D) Avoid channelling

Description : The main reason for dividing a tall packed tower into series of small towers is to (A) Minimise the overall pressure drop (B) Avoid flooding (C) Reduce liquid hold up (D) Avoid channelling

Last Answer : (D) Avoid channelling

Momentum transfer in laminar flow of fluids results due to the (A) Viscosity (B) Density (C) Velocity gradient (D) None of these

Description : Momentum transfer in laminar flow of fluids results due to the (A) Viscosity (B) Density (C) Velocity gradient (D) None of these

Last Answer : (C) Velocity gradient

As shown in the illustration, if 'R1' and 'R2' have unequal values, the ____________. EL-0019 A. voltage drop across 'R1' will not be equal to the voltage drop across 'R2' B. current flow through 'R1' will equal the current flow through 'R2' C. the energy dissipated in 'R1' will be the same as the energy dissipated in 'R2' D. current flow through 'R1' will differ from the current flow through 'R2'

Description : As shown in the illustration, if 'R1' and 'R2' have unequal values, the ____________. EL-0019 A. voltage drop across 'R1' will not be equal to the voltage drop across 'R2' B. current flow ... energy dissipated in 'R2' D. current flow through 'R1' will differ from the current flow through 'R2'

Last Answer : Answer: D

In a DC series circuit, all the conductors have the same ____________. A. power expended in them B. voltage drop across them C. resistance to current flow D. current passing through them

Description : In a DC series circuit, all the conductors have the same ____________. A. power expended in them B. voltage drop across them C. resistance to current flow D. current passing through them

Last Answer : Answer: D

In continuous filtration (at a constant pressure drop), filtrate flow rate varies inversely as the (A) Square root of the velocity (B) Square of the viscosity (C) Filtration time only (D) Washing time only

Description : In continuous filtration (at a constant pressure drop), filtrate flow rate varies inversely as the (A) Square root of the velocity (B) Square of the viscosity (C) Filtration time only (D) Washing time only

Last Answer : (A) Square root of the velocity

The fluid velocity varies as the cube of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop for __________ fluid. (A) Newtonian (B) Pseudo-plastic (C) Dilatent (D) Bingham plastic

Description : The fluid velocity varies as the cube of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop for __________ fluid. (A) Newtonian (B) Pseudo-plastic (C) Dilatent (D) Bingham plastic

Last Answer : (B) Pseudo-plastic