Bunsen burner is an example of a/an __________ burner. (A) Inside mixing/premix type (B) Outside mixing/diffusion flame/nozzle mix type (C) Rotary cup (D) Submerged combustion

Bunsen burner is an example of a/an __________ burner.
(A) Inside mixing/premix type
(B) Outside mixing/diffusion flame/nozzle mix type
(C) Rotary cup
(D) Submerged combustion
by

1 Answer

Answer :

(A) Inside mixing/premix type
by

Related questions

If fuel and air are mixed ahead of the burner, it is called a/an __________ burner. (A) Premix (B) Outside mixing type (C) Rotary (D) Diffusion

Description : If fuel and air are mixed ahead of the burner, it is called a/an __________ burner. (A) Premix (B) Outside mixing type (C) Rotary (D) Diffusion

Last Answer : (A) Premix

The hottest part of the flame of a Bunsen burner is the

Description : The hottest part of the flame of a Bunsen burner is the

Last Answer : The hottest part of the flame of a Bunsen burner is the A. Blue Zone B. Zone of complete combustion ... D. All parts of the flame are equally hot.

In which direction should you move the inoculating loop in the Bunsen burner flame?

Description : In which direction should you move the inoculating loop in the Bunsen burner flame?

Last Answer : Need answer

Why should you turn a Bunsen burner to a yellow flame if you need to leave it?

Description : Why should you turn a Bunsen burner to a yellow flame if you need to leave it?

Last Answer : The yellow flame is more visible - making it easier for othersto see. It's also a colder flame than the blue conical one.

Why do cations emit colors when heated in a Bunsen burner flame?

Description : Why do cations emit colors when heated in a Bunsen burner flame?

Last Answer : Atoms were excited by heating, electrons move to a higher energy level and as these electrons fall back to a lower energy level, the specific radiation for the element is emitted.

What kind of combustion is observed in alkanes? Why do air holes of a gas burner have to be adjusted when vessel being heated gets blackened by the flame? -Science

Description : What kind of combustion is observed in alkanes? Why do air holes of a gas burner have to be adjusted when vessel being heated gets blackened by the flame? -Science

Last Answer : Alkanes are saturated hydrocarbons and generally burn in air with a blue, non-sooty flame. If the bottoms of the cooking vessels in our homes are getting blackened, it shows that the air holes of the gas stove are getting blocked and the fuel is not burning completely.

Presence of moisture in fuel oil would (A) Keep the burner tips cool (B) Aid in proper combustion (C) Because sputtering, possibly extinguishing flame (D) Clean the nozzles

Description : Presence of moisture in fuel oil would (A) Keep the burner tips cool (B) Aid in proper combustion (C) Because sputtering, possibly extinguishing flame (D) Clean the nozzles

Last Answer : (D) Clean the nozzles

Who Discovered Bunsen Burner ?

Description : Who Discovered Bunsen Burner ?

Last Answer : Robert Bunsen discovers Bunsen Burner.

What is a Bunsen burner from the North Sea?

Description : What is a Bunsen burner from the North Sea?

Last Answer : The bunsen burner doesn't come from the North Sea. In the UnitedKingdom, the mains gas supply is natural gas which largely comesfrom the wells in the North Sea, so we call it North Sea gas. ... 1970's we used coal gaswhich needed a different admixture of air so all our bunsens had tobe converted.

Why is it safer to close the air holes of the Bunsen burner with unattended?

Description : Why is it safer to close the air holes of the Bunsen burner with unattended?

Last Answer : What is the answer ?

What is a stand and mat used to hold a beaker or flask over a Bunsen burner?

Description : What is a stand and mat used to hold a beaker or flask over a Bunsen burner?

Last Answer : Need answer

What is a Bunsen burner from the North Sea?

Description : What is a Bunsen burner from the North Sea?

Last Answer : The bunsen burner doesn't come from the North Sea. In the UnitedKingdom, the mains gas supply is natural gas which largely comesfrom the wells in the North Sea, so we call it North Sea gas. ... 1970's we used coal gaswhich needed a different admixture of air so all our bunsens had tobe converted.

A colorless salt gives violet colour to Bunsen flame and also turns moisture litmus paper blue. It is :

Description : A colorless salt gives violet colour to Bunsen flame and also turns moisture litmus paper blue. It is :

Last Answer : A colorless salt gives violet colour to Bunsen flame and also turns moisture litmus paper blue. It is : A. `Na_(2) ... C. `NaNO_(3)` D. `K_(2)CO_(3)`

How many of following metals impart a characteristic colour to the Bunsen flame ? `(i) Na " " (ii) Li " " (iii) K " " (iv) Ba` `(v) Sr " " (vi) Mg " "

Description : How many of following metals impart a characteristic colour to the Bunsen flame ? `(i) Na " " (ii) Li " " (iii) K " " (iv) Ba` `(v) Sr " " (vi) Mg " "

Last Answer : How many of following metals impart a characteristic colour to the Bunsen flame ? `(i) Na " " (ii) Li " " (iii) K ... ix) `Be " " (x )Ca " " (x i)Cu`

In the following diagram bunsen flame the (X ) represent.

Description : In the following diagram bunsen flame the (X ) represent.

Last Answer : In the following diagram bunsen flame the (X ) represent. A. Oxidising zone B. Reducing zone C. Lower temperature zone D. Hottest portion of flame

Colour imparted to the Bunsen flame by strontium salt is - (1) bluish green (2) apple-green (3) brick red (4) crimson red

Description : Colour imparted to the Bunsen flame by strontium salt is - (1) bluish green (2) apple-green (3) brick red (4) crimson red

Last Answer : (4) crimson red Explanation: A flame test is performed by introducing a sample into the blue flame of a bunsen burner and noting any change in the colour of the flame. The tests can be used ... metallic elements in salts. With strontium salt, the colour of Bunsen flame ranges from crimson to red.

Colour imparted to the Bunsen flame by strontium salt is (1) bluish green (2) apple-green (3) brick red (4) crimson red

Description : Colour imparted to the Bunsen flame by strontium salt is (1) bluish green (2) apple-green (3) brick red (4) crimson red

Last Answer : crimson red

A __________ is a type of heat exchange system where water is heated to its' boiling point via combustion of a fuel blown through a tube submerged in water. a. Condensate loop b. Hyperbolic cooling tower c. Steam boiler d. All of above

Description : A __________ is a type of heat exchange system where water is heated to its' boiling point via combustion of a fuel blown through a tube submerged in water. a. Condensate loop b. Hyperbolic cooling tower c. Steam boiler d. All of above

Last Answer : c. Steam boiler

Turndown ratio of a burner gives an idea of the __________ in the furnace. (A) Range of fuel firing rates (B) Volume of the combustion chamber (C) Maximum heat input rate only (D) Minimum heat input rate only

Description : Turndown ratio of a burner gives an idea of the __________ in the furnace. (A) Range of fuel firing rates (B) Volume of the combustion chamber (C) Maximum heat input rate only (D) Minimum heat input rate only

Last Answer : (A) Range of fuel firing rates

Percentage of drum submerged in the slurry in case of rotary drum filter is (A) 3 (B) 30 (C) 85 (D) 25

Description : Percentage of drum submerged in the slurry in case of rotary drum filter is (A) 3 (B) 30 (C) 85 (D) 25

Last Answer : (B) 30

The amount of combustible escaping unconsumed from the furnace, depends upon the (A) Air supplied and furnace temperature (B) Burner design (thoroughness of mixing versus stratification) (C) Air preheat and the flow of gases in the furnace (mixing by induction, by acceleration or by change of direction) (D) All (A), (B) and (C)

Description : The amount of combustible escaping unconsumed from the furnace, depends upon the (A) Air supplied and furnace temperature (B) Burner design (thoroughness of mixing versus stratification) (C) Air preheat and the flow of ... , by acceleration or by change of direction) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Amount of coal lost in ash particle, which is carried through the boiler system, depends upon the (A) Physical nature, ash content and fineness of the coal (B) Amount of excess air supplied and load on the boiler (C) Type of burner and combustion chamber (D) All (A), (B) and (C)

Description : Amount of coal lost in ash particle, which is carried through the boiler system, depends upon the (A) Physical nature, ash content and fineness of the coal (B) Amount of excess air supplied and load on the boiler (C) Type of burner and combustion chamber (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Preheating of __________ the flame temperature. (A) The gaseous fuel before combustion decreases (B) Combustion air decreases (C) Either the fuel or the air or both, increases (D) Either the fuel or the air does not affect

Description : Preheating of __________ the flame temperature. (A) The gaseous fuel before combustion decreases (B) Combustion air decreases (C) Either the fuel or the air or both, increases (D) Either the fuel or the air does not affect

Last Answer : (C) Either the fuel or the air or both, increases

Give reasons for the following observations: (a) The element carbon forms a very large number of compounds. (b) Air holes of a gas burner have to be adjusted when the heated vessels get blackened by the flame. (c) Use of synthetic detergents causes pollution of water. -Chemistry

Description : Give reasons for the following observations: (a) The element carbon forms a very large number of compounds. (b) Air holes of a gas burner have to be adjusted when the heated vessels get blackened by the flame. (c) Use of synthetic detergents causes pollution of water. -Chemistry

Last Answer : Answer. (a) Carbon forms large number of compounds since carbon is small in size and can form stable covalent bonds (catenation) and it shows tetravalency. (b) Air holes of gas burner are ... not get blackened. (c) Some synthetic detergents are non-biodegradable, therefore, cause pollution of water.

What does Perma-Flame Instant Re-Ignition mean on the Dacor SGM304S 30" Preference All-Gas 4 Burner Cooktop ?

Description : What does Perma-Flame Instant Re-Ignition mean on the Dacor SGM304S 30" Preference All-Gas 4 Burner Cooktop ?

Last Answer : If the piolet light blows out it will reignite instantly so you do not need matches.

Which of the following statements represents an application of a silicon controlled rectifier? A. To provide DC power for a main propulsion motor. B. For use as a voltage reference diode. C. For sensing flame in an automated burner. D. To eliminate power supply hum.

Description : Which of the following statements represents an application of a silicon controlled rectifier? A. To provide DC power for a main propulsion motor. B. For use as a voltage reference diode. C. For sensing flame in an automated burner. D. To eliminate power supply hum.

Last Answer : Answer: A

In case of pulverised coal fired steam boiler, the secondary air serves the main purpose of (A) Transportation of coal (B) Drying of coal (C) Combustion of coal by supplying it around the burner (D) Preheating the primary air

Description : In case of pulverised coal fired steam boiler, the secondary air serves the main purpose of (A) Transportation of coal (B) Drying of coal (C) Combustion of coal by supplying it around the burner (D) Preheating the primary air

Last Answer : (C) Combustion of coal by supplying it around the burner

Temperature of preheated air used for the transportation of pulverised coal through pipes to the burner of a boiler furnace is restricted to a maximum limit of about 300° C to avoid the (A) Requirement of large volume combustion chamber (B) Risk of explosion (C) Chances of clinker formation (D) Incomplete combustion of coal

Description : Temperature of preheated air used for the transportation of pulverised coal through pipes to the burner of a boiler furnace is restricted to a maximum limit of about 300° C to avoid the (A) ... chamber (B) Risk of explosion (C) Chances of clinker formation (D) Incomplete combustion of coal

Last Answer : (B) Risk of explosion

The main function of primary air in pulverised coal fired burner is to (A) Burn CO to CO2 (B) Dry and transport the coal (C) Have proper combustion by supplying it around the burner (D) Preheat the tertiary air used for complete combustion of CO to CO2

Description : The main function of primary air in pulverised coal fired burner is to (A) Burn CO to CO2 (B) Dry and transport the coal (C) Have proper combustion by supplying it around the burner (D) Preheat the tertiary air used for complete combustion of CO to CO2

Last Answer : (B) Dry and transport the coal

In case of pulverised coal fired steam boiler, the secondary air serves the main purpose of (A) Transportation of coal (B) Drying of coal (C) Combustion of coal by supplying it around the burner (D) Preheating the primary air

Description : In case of pulverised coal fired steam boiler, the secondary air serves the main purpose of (A) Transportation of coal (B) Drying of coal (C) Combustion of coal by supplying it around the burner (D) Preheating the primary air

Last Answer : (C) Combustion of coal by supplying it around the burner

In pre-chamber and swirl type of combustion system ______________ is used. a) single hole injector b) multi hole injector c) long stem injector d) pintle nozzle

Description : In pre-chamber and swirl type of combustion system ______________ is used. a) single hole injector b) multi hole injector c) long stem injector d) pintle nozzle

Last Answer : Answer: d Explanation: In pre-chamber and swirl type of combustion system pintle nozzle is used and not the other nozzles.

Why is yellow flame is an example of combustion?

Description : Why is yellow flame is an example of combustion?

Last Answer : fvfvfvffvf

Why is yellow flame is an example of combustion?

Description : Why is yellow flame is an example of combustion?

Last Answer : fvfvfvffvf

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

For the case of a fuel gas undergoing combustion with air, if the air/fuel ratio is increased, the adiabatic flame temperature will (A) Increase (B) Decrease (C) Increase or decrease depending on the fuel type (D) Not change

Description : For the case of a fuel gas undergoing combustion with air, if the air/fuel ratio is increased, the adiabatic flame temperature will (A) Increase (B) Decrease (C) Increase or decrease depending on the fuel type (D) Not change

Last Answer : (B) Decrease

Basic Parts of a Boiler. Burner, • the combustion chamber, • the heat exchanger • All of the above

Description : Basic Parts of a Boiler. Burner, • the combustion chamber, • the heat exchanger • All of the above

Last Answer : • All of the above

In an ideal P.F.R. at steady state conditions (A) The composition of reactants remains constant along a flow path (B) The conversion of the reactant varies from point to point along a flow path (C) There is no lateral mixing of fluid (D) There may be diffusion along the flow path

Description : In an ideal P.F.R. at steady state conditions (A) The composition of reactants remains constant along a flow path (B) The conversion of the reactant varies from point to point along a flow path (C) There is no lateral mixing of fluid (D) There may be diffusion along the flow path

Last Answer : (B) The conversion of the reactant varies from point to point along a flow path

What sentence has premix?

Description : What sentence has premix?

Last Answer : what sentence has pemix in it

Which of the following premix methods is used for base course? (A) Bituminous carpet (B) Mastic asphalt (C) Sheet asphalt (D) Bituminous bound macadam

Description : Which of the following premix methods is used for base course? (A) Bituminous carpet (B) Mastic asphalt (C) Sheet asphalt (D) Bituminous bound macadam

Last Answer : Answer: Option D

In practical operation of any furnace, zero oxygen percentage or theoretical CO2 percentage in flue gas is rarely achieved, because of (A) Use of non-preheated combustion air (B) Use of pulverised solid fuels (C) Imperfect mixing of fuel & air and infiltration of air (D) Use of excessive positive draft in the furnace

Description : In practical operation of any furnace, zero oxygen percentage or theoretical CO2 percentage in flue gas is rarely achieved, because of (A) Use of non-preheated combustion air (B) Use of pulverised solid ... of fuel & air and infiltration of air (D) Use of excessive positive draft in the furnace

Last Answer : (C) Imperfect mixing of fuel & air and infiltration of air

Size of the combustion chamber of a furnace depends upon the (A) Heat release rate of the fuel (B) Preheat temperature of fuel & air (C) Method of mixing the fuel & air (D) All (A), (B) and (C)

Description : Size of the combustion chamber of a furnace depends upon the (A) Heat release rate of the fuel (B) Preheat temperature of fuel & air (C) Method of mixing the fuel & air (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Supply of excess air for complete combustion of fuel is necessitated to facilitate (A) Its thorough mixing with air (B) Attainment of chemical equilibrium (C) Attainment of high temperature (D) None of these

Description : Supply of excess air for complete combustion of fuel is necessitated to facilitate (A) Its thorough mixing with air (B) Attainment of chemical equilibrium (C) Attainment of high temperature (D) None of these

Last Answer : (A) Its thorough mixing with air

Smoke is produced due to (A) Insufficient supply of combustion air and insufficient time for combustion (B) Poor quality of fuel and improper mixing of fuel & combustion air (C) Poor design & overloading of furnace (D) All (A), (B) and (C)

Description : Smoke is produced due to (A) Insufficient supply of combustion air and insufficient time for combustion (B) Poor quality of fuel and improper mixing of fuel & combustion air (C) Poor design & overloading of furnace (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In case of liquid petrofuels, momentary combustion is observed at its (A) Flash point (B) Preheating temperature corresponding to viscosity of 25 centistokes (C) Flame temperature (D) Fire point

Description : In case of liquid petrofuels, momentary combustion is observed at its (A) Flash point (B) Preheating temperature corresponding to viscosity of 25 centistokes (C) Flame temperature (D) Fire point

Last Answer : (A) Flash point

Oxygen enrichment of combustion air does not result in increase of the (A) Flame temperature (B) Oxygen in the flue gas (C) Stack loss (D) Heat transfer rate in the furnace

Description : Oxygen enrichment of combustion air does not result in increase of the (A) Flame temperature (B) Oxygen in the flue gas (C) Stack loss (D) Heat transfer rate in the furnace

Last Answer : (B) Oxygen in the flue gas

Advantages of use of preheated combustion air are (A) Saving in fuel consumption (B) Reduction in scale losses (C) Increase in flame temperature (D) All (A), (B) and (C)

Description : Advantages of use of preheated combustion air are (A) Saving in fuel consumption (B) Reduction in scale losses (C) Increase in flame temperature (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Combustion of fuel in a furnace with oxygen enriched air results in higher (A) Flue gas volume (B) Flame temperature (C) Fuel consumption (D) Stack loss

Description : Combustion of fuel in a furnace with oxygen enriched air results in higher (A) Flue gas volume (B) Flame temperature (C) Fuel consumption (D) Stack loss

Last Answer : (B) Flame temperature

Which of the following advantages is not associated with the use of preheated air for combustion of a fuel in the furnace? (A) Increase in calorific value of the fuel (B) Increase in flame temperature (C) Reduction in scale losses (D) Saving in fuel consumption

Description : Which of the following advantages is not associated with the use of preheated air for combustion of a fuel in the furnace? (A) Increase in calorific value of the fuel (B) Increase in flame temperature (C) Reduction in scale losses (D) Saving in fuel consumption

Last Answer : (A) Increase in calorific value of the fuel

Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) Burning the fuel with theoretically required amount of pure oxygen results in attainment of maximum adiabatic flame temperature (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Description : Pick out the wrong statement. (A) Theoretical flame temperature is the temperature attained by the products of combustion, when the fuel is burned without loss or gain of heat (B) ... flame temperature (D) Adiabatic flame temperatures of actual combustions are always less than the maximum values

Last Answer : (C) Burning the fuel with excess pure oxygen results in maximum theoretical flame temperature

A coal having high amount of volatile matter (A) Would require smaller combustion chamber (B) Produces very little of tar and gas on carbonisation (C) Ignites easily and burns with long smoky flame (D) All (A), (B) and (C)

Description : A coal having high amount of volatile matter (A) Would require smaller combustion chamber (B) Produces very little of tar and gas on carbonisation (C) Ignites easily and burns with long smoky flame (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)