State the classification of locomotive.

State the classification of locomotive.
by

1 Answer

Answer :

Classification of Locomotive: 

A) Based on the types of service rendered: 

1. Freight service for transportation of goods only. 

2. Passenger service for transportation of passengers. 

3. Mixed traffic service (goods and passenger transportation). 

4. Shunting service at stations and sheds. 

5. Banking service to bank the coaches at proper locations. 

B) Based on the gauge of railway: 

1. Broad gauge (W) 

2. Meter gauge (Y). 

C) Based on the type of supply used: 

1. Alternating current (AC) 

2. Direct current (DC)

by

Related questions

Explain with neat sketch overload protection for power circuit of locomotive.

Description : Explain with neat sketch overload protection for power circuit of locomotive.

Last Answer : Overload Protection for Power Circuit of Locomotive:  1. To protect the main power circuit from overload, the thermal overload relays are used. 2. The overload is sensed by the ... overload relay OLR3 operates for overload fault on traction motor due to the flashover of traction motors. 

Explain protection of locomotive from overvoltage and under voltage

Description : Explain protection of locomotive from overvoltage and under voltage

Last Answer : Protection of Locomotive From Overvoltage and Under Voltage: 1. For protection against over voltages the over voltage relay which is basically a potential transformer (PT) is used. 2. ... a relay triggering an alarm, which enables the power controller to react and take corrective measures.

Explain the surge protection of electric locomotive from i) Direct lightening stroke ii) Switching surges

Description : Explain the surge protection of electric locomotive from i) Direct lightening stroke ii) Switching surges

Last Answer : i)Protection of Electric Locomotive From Direct Lightening Stroke:  1. The direct lightning strokes may strike on the overhead conductor on the roof of the locomotive. 2. To protect the ... reduce the steepness of the wave front and also help to absorb the energy in the resistance.

List different types of signals. State application of each.

Description : List different types of signals. State application of each.

Last Answer : Different Types of Signals: 1) Flag signals: This is shown by signalman if green flag is raised; it means to proceed with caution. Green flag shown down, it means there is track defect; ... green lamps indicate indications as in the 2-aspect system, and the yellow lamp shows the caution indication.

State four important features of LEM that differ it from normal electric motor.

Description : State four important features of LEM that differ it from normal electric motor. 

Last Answer : Important Features of LEM That Differ it From Normal Electric Motor: 1. In LEM, primary & secondary or stator & rotor have longitudinal arrangement while normal electric motor has circular ... in high speed levitated system while normal electric motor is used for rotary mechanical output.

State any four relays used for catenary protection. State function of each relay.

Description : State any four relays used for catenary protection. State function of each relay.

Last Answer : Relays Used for Catenary Protection: 1. MHO relay: Wrong coupling protection. 2. MHO relay: Over current protection at farthest point. 3. Over current relay: Over current protection against faults near substation 4. Under voltage relay: Protection against faults far away from substation. 

List any four current collectors for overhead system. State application of each.

Description : List any four current collectors for overhead system. State application of each.

Last Answer : Current Collectors for Overhead System With Their Application: 1. Trolley (Pole) collector: It is used for trolley buses having speed range from 20kmph to 32kmph. 2. Cable collector: This ... used for main line service locomotives, urban trains, suburban trains etc. having higher speed range.

Explain with neat diagram i) Sectioning and paralleling post ii) Sub sectioning post

Description : Explain with neat diagram i) Sectioning and paralleling post ii) Sub sectioning post

Last Answer : i) Sectioning and Paralleling Post: Explanation of Sectioning and Paralleling Post: 1. The power supply arrangement is as shown in above figure for two track lines between feeding posts and ... subsection or the other. 4. There is no interrupter for paralleling the up and down track line

Give protection scheme used for 25kV catenary protection for AC traction.

Description : Give protection scheme used for 25kV catenary protection for AC traction.

Last Answer : Protection Scheme Used for 25kV Catenary Protection for AC Traction: As shown in the figure below the scheme consists of 1) MHO relay that makes use of the impedance phase angle to get proper ... adjustment. 2) Over current relay. 3) Under voltage relay for low voltage protection.

Write down the circuit breaker with their rating used in traction substation. Explain any one.

Description : Write down the circuit breaker with their rating used in traction substation. Explain any one.

Last Answer : Circuit Breaker With Their Rating Used in Traction Substation: Rated capacity of a circuit breaker is 750Amps at 25 kV, 500MVA. Its overall tripping time is 0.14 seconds composed of 0.04 ... but in case of traction substation application, mostly Minimum Oil Circuit Breaker (MOCB) is preferred.

Give any four advantages of voice frequency signaling over DC signaling system.

Description : Give any four advantages of voice frequency signaling over DC signaling system. 

Last Answer : Advantages of Voice Frequency Signaling Over DC Signaling System: 1. Large number of circuits can be easily derived over a single pair of wires (single pair can control 18 stations). 2. Signal ... used over long distances. 5. Can be used where large number of equipment can be controlled. 

List any four weaknesses of LIM propelled railway traction system.

Description : List any four weaknesses of LIM propelled railway traction system.

Last Answer : Weaknesses of LIM Propelled Railway Traction System: 1. The system requires looping of all reaction rails all along the route. This considerably adds to the cost of track. 2. Since Al is relative ... in the magnetic and electric circuits at entry and exit ends of motor, poor motor efficiency.

Explain with neat diagram trolley collector for overhead system

Description : Explain with neat diagram trolley collector for overhead system

Last Answer : Trolley Collector for Overhead System:  This consists of a grooved gun metal wheel or grooved slider shoe with carbon insert carried attached to the end of a long pole provided on the top of ... gives rise to high current density. Suitable for comparative low speed (say 22 to 30 kmph).

Draw and explain in brief construction of Diamond Pantograph. Write one advantage and one disadvantage of it.

Description : Draw and explain in brief construction of Diamond Pantograph. Write one advantage and one disadvantage of it.

Last Answer : Diamond Pantograph: Construction of Diamond Pantograph: 1)Diamond Pantograph consist of pressed steel channel sectional fitted with renewable collector strips and supported at the apex of Pentagonal ... It requires more maintenance than Faiveley type. 4. It is costlier than Faiveley type.

With neat sketch explain automatic weight tension and temperature compensation.

Description : With neat sketch explain automatic weight tension and temperature compensation.

Last Answer : Automatic Weight Tension and Temperature Compensation: The tension in overhead lines in traction systems depends on the temperature. Higher temperatures lead to expansion of conductors and hence sag. It is therefore ... figure. The tension in the contact wire and catenary is around 1000 kg.

Explain the following - 1) Encumbrance 2) Span length.

Description : Explain the following - 1) Encumbrance 2) Span length.

Last Answer : Encumbrance: It is the axial distance between catenary and contact wire. Its value is maintained at 1.4 m as per rules except at i) Turn outs, ii) Overlaps iii) In the vicinity of over ... depends various factors like: i) Wind pressure ii) Curvatures iii) Current collection point of view etc.

Give the purpose and location of neutral section and section insulator.

Description : Give the purpose and location of neutral section and section insulator. 

Last Answer : Purpose of Neutral section: Passing of pantograph under insulated overlap will cause short circuit between two phases, damaging OHE & pantograph. To avoid this bridging, a neutral section is inserted between them ... Location: Located at cross over from one track to other, from main line to siding.

Give any four advantages of remote control system.

Description : Give any four advantages of remote control system.

Last Answer : Advantages of remote control system: 1. As substations and control posts are unattended (due to remote controls) there is considerable savings due to less manpower. 2. Central control station ... Switching operations are carried out safely, quickly, and economically. 6. Maintenance cost is low.

Draw a neat labelled block diagram of AC electric locomotive. State the function of each part.

Description : Draw a neat labelled block diagram of AC electric locomotive. State the function of each part.

Last Answer : labelled diagram ofAC electric locomotive:  Function of AC electric locomotive Parts: 1) Overhead contact wire: Supply of 1-ph, 25KV, 50Hz, AC is given to overhead conductor. 2) Current collecting ... mechanical power to run the train i.e. DC series motor which is used as traction motor.

State the function of following auxiliaries used in electric locomotive, i) Batteries ii ) Compressor iii ) Blower iv ) Exhauster

Description : State the function of following auxiliaries used in electric locomotive, i) Batteries ii ) Compressor iii ) Blower iv ) Exhauster 

Last Answer : Ans: 1) Batteries - supply to run baby compressor which supplies air for initial raising of pantograph and closing of air blast circuit breaker. 2) Compressor - supply air for operation, control and ... blower, reactor blower, SCR blower, traction motor blower etc. 4) Exhausters - for vacuum brakes.

State the function of a contactor in a power circuit of locomotive. List different types of it and state one application of each.

Description : State the function of a contactor in a power circuit of locomotive. List different types of it and state one application of each.

Last Answer : Ans: Contactor in power circuit of locomotive is used to connect relevant sections for operation. Connecting or disconnecting the power circuit at different conditions of operation and at different locations. ... heavy power currents. 3) Cam & roller operated - used for group switching.

The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is 15 N per kN, the maximum speed that the locomotive can attain on level track will be a.43 kmph b.83 kmph c.103 kmph d.107 dynes e.38 kmph

Description : The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is 15 N per kN, the maximum speed that the locomotive can attain on level track will be a.43 kmph b.83 kmph c.103 kmph d.107 dynes e.38 kmph

Last Answer : e. 38 kmph

The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is qN per kN, the maximum speed that the locomotive can attain on level track will be a.103 kmph b.83 kmph c.107 dynes d.43 kmph e.63 kmph

Description : The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is qN per kN, the maximum speed that the locomotive can attain on level track will be a.103 kmph b.83 kmph c.107 dynes d.43 kmph e.63 kmph

Last Answer : e. 63 kmph

A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in 10 sec. The distance between the locomotive and the wagons at this instant assuming that the forces acting on the train are unaltered would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Description : A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in ... would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Last Answer : d. 0.5 m

What was the the name of the first steam powered locomotive by George Stephenson?

Description : What was the the name of the first steam powered locomotive by George Stephenson?

Last Answer : Rocket*Skinny mini*

Who was the first African American locomotive engineer for Houston Beltway Terminal?

Description : Who was the first African American locomotive engineer for Houston Beltway Terminal?

Last Answer : Feel Free to Answer

How much is a 2 cents Locomotive 1870 stamp worth?

Description : How much is a 2 cents Locomotive 1870 stamp worth?

Last Answer : Feel Free to Answer

Match the following: List-I List-II A. Varanasi I. Indian Rare Earths Ltd B. Koyali II. Hindustan Machine Tools Ltd C. Pinjore III. Diesel Locomotive Works D. Alwaye IV. Petro-Chemical Complex Codes: A B C D (a) I II III IV (b) IV III II I (c) III IV II I (d) III IV I II

Description : Match the following: List-I List-II A. Varanasi I. Indian Rare Earths Ltd B. Koyali II. Hindustan Machine Tools Ltd C. Pinjore III. Diesel Locomotive Works D. Alwaye IV. Petro-Chemical Complex Codes: A B C D (a) I II III IV (b) IV III II I (c) III IV II I (d) III IV I II

Last Answer : Ans: (c)

Diesel locomotive works of the Indian Railways is situated at- (1) Mumbai (2) Bangalore (3) Varanasi (4) Hyderabad

Description : Diesel locomotive works of the Indian Railways is situated at- (1) Mumbai (2) Bangalore (3) Varanasi (4) Hyderabad

Last Answer : (3) Varanasi Explanation: India has the 4th largest coal reserves in the world. Indian mineral industry has contributed significantly to make the nation self-sufficient in coal. To meet the ... other users, the production trends in coal and lignite sectors have shown a remarkable increasing trend.

Locomotive boiler tubes are made of __________ alloys. (A) Arsenic copper (B) Magnesium (C) Aluminium (D) Nickel

Description : Locomotive boiler tubes are made of __________ alloys. (A) Arsenic copper (B) Magnesium (C) Aluminium (D) Nickel

Last Answer : (A) Arsenic copper

If is the speed of a locomotive in km per hour, g is the acceleration due to gravity, is the distance between running faces of the rails and is the radius of the circular curve, the required super elevation is (A) gV²/GR (B) Rg/GV² (C) GR/gV² (D) GV²/gR

Description : If is the speed of a locomotive in km per hour, g is the acceleration due to gravity, is the distance between running faces of the rails and is the radius of the circular curve, the required super elevation is (A) gV²/GR (B) Rg/GV² (C) GR/gV² (D) GV²/gR

Last Answer : (D) GV²/gR

Which of the following is used to produce draught in the locomotive boilers? (A) Chimney (B) Induced draught fan (C) Forced draught fan (D) Steam jet arrangement

Description : Which of the following is used to produce draught in the locomotive boilers? (A) Chimney (B) Induced draught fan (C) Forced draught fan (D) Steam jet arrangement

Last Answer : Option D

Among which locomotive steam engines have the highest efficiency? a) 1 MW b) 2 MW c) 30 MW d) 660 MW

Description : Among which locomotive steam engines have the highest efficiency? a) 1 MW b) 2 MW c) 30 MW d) 660 MW

Last Answer : d) 660 MW

Which of these is a stationary boiler? • Locomotive boiler • Marine boiler • Mobile boiler • Babcock Wilcox boiler

Description : Which of these is a stationary boiler? • Locomotive boiler • Marine boiler • Mobile boiler • Babcock Wilcox boiler

Last Answer : • Babcock Wilcox boiler

Which of the following boiler is best suited to meet the fluctuating demand of steam....... A locomotive boiler. B Lancashire boiler C Cornish boiler D Babcock and wilcox boiler

Description : Which of the following boiler is best suited to meet the fluctuating demand of steam....... A locomotive boiler. B Lancashire boiler C Cornish boiler D Babcock and wilcox boiler

Last Answer : A locomotive boiler.

Which of the following is a water tube boiler........ A]Locomotive boiler B]Lancashire boiler C]Cornish boiler D]Babcock and wilcox boiler

Description : Which of the following is a water tube boiler........ A]Locomotive boiler B]Lancashire boiler C]Cornish boiler D]Babcock and wilcox boiler

Last Answer : in a Truss structure and nature of reactive force is in the nature of

Which of the following boiler is best suited to meet the fluctuating demand of steam....... A]Locomotive boiler. B]Lancashire boiler C]Cornish boiler D]Babcock and wilcox boiler

Description : Which of the following boiler is best suited to meet the fluctuating demand of steam....... A]Locomotive boiler. B]Lancashire boiler C]Cornish boiler D]Babcock and wilcox boiler

Last Answer : A]Locomotive boiler.

The draught in locomotive boilers is produced by a ___________ a) Chimney b) Centrifugal fan c) Steam jet d) All of the above

Description : The draught in locomotive boilers is produced by a ___________ a) Chimney b) Centrifugal fan c) Steam jet d) All of the above

Last Answer : c) Steam jet

Locomotive boiler has a) 137 fire tubes and 44 superheated tubes b) 147 fire tubes and 34 superheated tubes c) 157 fire tubes and 24 superheated tubes d) 167 fire tubes and 14 superheated tubes

Description : Locomotive boiler has a) 137 fire tubes and 44 superheated tubes b) 147 fire tubes and 34 superheated tubes c) 157 fire tubes and 24 superheated tubes d) 167 fire tubes and 14 superheated tubes

Last Answer : c) 157 fire tubes and 24 superheated tubes

Locomotive was invented by Peter Couper in: (a) 1820 (b) 1830 (c) 1835

Description : Locomotive was invented by Peter Couper in: (a) 1820 (b) 1830 (c) 1835

Last Answer : (b) 1830

RBG loading caters for maaaaximum axle load of…….tones for locomotive with trailing loadof…… tonnes/metre of track with maximum axle load of…….tonnes for wagons a)22.9,7.67,25 b)22.5,7.67,22.9* c)25,7.67,22.9, d)None of above

Description : RBG loading caters for maaaaximum axle load of…….tones for locomotive with trailing loadof…… tonnes/metre of track with maximum axle load of…….tonnes for wagons a)22.9,7.67,25 b)22.5,7.67,22.9* c)25,7.67,22.9, d)None of above

Last Answer : b)22.5,7.67,22.9*

GML loading caters for maaaaximum axle load of…….tonnes for locomotive with trailing load of………tonnes/metre. a)22.9,7.67* b)22.5,7.67 c)25,7.67 d)None of above

Description : GML loading caters for maaaaximum axle load of…….tonnes for locomotive with trailing load of………tonnes/metre. a)22.9,7.67* b)22.5,7.67 c)25,7.67 d)None of above

Last Answer : a)22.9,7.67*

A train locomotive whose mass is 1 x 106 kilograms is traveling EAST at a speed of 100 kilometers per hour. A NORTHERLY wind is applying a force of 100 Newtons on the locomotive. How much work is the wind doing on the locomotive for each 10 meters it travels? w) 0 joules x) 1,000 joules y) 10,000 joules z) 100,000 joules

Description : A train locomotive whose mass is 1 x 106 kilograms is traveling EAST at a speed of 100 kilometers per hour. A NORTHERLY wind is applying a force of 100 Newtons on the locomotive. How much work is the wind doing ... 10 meters it travels? w) 0 joules x) 1,000 joules y) 10,000 joules z) 100,000 joules

Last Answer : ANSWER: W -- 0 JOULES

Draw a neat sketch of ‘Locomotive coupler’ mechanism. Explain its working in brief.

Description : Draw a neat sketch of ‘Locomotive coupler’ mechanism. Explain its working in brief.

Last Answer : Figure: Coupler Rod of Locomotive  (Link AD = Link BC = Crank Link CD = Coupling Rod Link AB = Fixed Link = Frame) Working of Coupler Rod of Locomotive: It is an ... center distance between them. This mechanism is meant for transmitting rotary motion from one wheel to the other wheel.

List any two types of relays and contactors with their function used in AC locomotive.

Description : List any two types of relays and contactors with their function used in AC locomotive.

Last Answer : Types of relays and their function in AC locomotive: 1) Buchholz Relay: To protect traction transformer from incipient faults. 2) Earth fault or Ground fault Relay: To protect the system against all kinds of ... is engaged with cam on shaft. Cam shaft can be moved by air engine or vane motor. 

Draw neat labeled diagram of single phase AC locomotive showing its various equipments of power circuit and give function of each equipment used in power circuit.

Description : Draw neat labeled diagram of single phase AC locomotive showing its various equipments of power circuit and give function of each equipment used in power circuit.

Last Answer : Functions of equipment: 1) circuit breaker: disconnects the locomotive equipment from the supply in the event of fault in the equipment / loco. 2) On load tap changer, used to control the ... 6) Traction motor: operates as per the required operating characteristics to take on the traction load.

Explain the need of maintenance of electric locomotive.

Description : Explain the need of maintenance of electric locomotive. 

Last Answer : Need for maintenance : To correct the effects of Wearing out. To correct the effects of deterioration of locomotive component during normal use. In the long run (aging) performance ... availability of locomotive.  Ensures reliability and operational readiness. Ensures safety by all means.

List any four types of electrical faults that may occur on electric locomotive with their causes.

Description : List any four types of electrical faults that may occur on electric locomotive with their causes.

Last Answer : Electric faults and causes in electric locomotive: Changes in the conditions of overloading leading to heating of winding , failure of insulation. Changes in the operating environments such as temperature, ... due to bad maintenance either due to lack of attention which should have been given .

List any eight equipment used in auxiliary circuit of electric locomotive.

Description : List any eight equipment used in auxiliary circuit of electric locomotive.

Last Answer : Ans: 1) Batteries , 2) Compressor , 3) Blowers , 4) Exhausters , 5) Pumps , 6) Cab ventilating fans.7) Locomotive heating (if any) , 8) Transformer oil cooling radiator. 9) head light , 10) Flasher light , 11) Marker light , 12) Engine Horn

Locomotive having monomotor bogies?

Last Answer : Locomotive having monomotor bogies has better coefficient of adhesion, are suited both for passanger as well as freight service, has better riding qualities due to the reduction of lateral forces.