Explain the need of maintenance of electric locomotive.

Explain the need of maintenance of electric locomotive. 
by

1 Answer

Answer :

Need for maintenance : To correct the effects of Wearing out. To correct the effects of deterioration of locomotive component during normal use. In the long run (aging) performance gets affected and finally beyond safe limit components may fail altogether. Increase the life of equipment. Maintain the proper quality of output of equipment. Maintain the efficiency of the equipment.


OR


Maintenance of electric locomotive is needed as it: Extends the useful life of parts / components of locomotive . Ensures proper availability of locomotive.  Ensures reliability and operational readiness. Ensures safety by all means.

by

Related questions

List any four types of electrical faults that may occur on electric locomotive with their causes.

Description : List any four types of electrical faults that may occur on electric locomotive with their causes.

Last Answer : Electric faults and causes in electric locomotive: Changes in the conditions of overloading leading to heating of winding , failure of insulation. Changes in the operating environments such as temperature, ... due to bad maintenance either due to lack of attention which should have been given .

List any eight equipment used in auxiliary circuit of electric locomotive.

Description : List any eight equipment used in auxiliary circuit of electric locomotive.

Last Answer : Ans: 1) Batteries , 2) Compressor , 3) Blowers , 4) Exhausters , 5) Pumps , 6) Cab ventilating fans.7) Locomotive heating (if any) , 8) Transformer oil cooling radiator. 9) head light , 10) Flasher light , 11) Marker light , 12) Engine Horn

State the function of following auxiliaries used in electric locomotive, i) Batteries ii ) Compressor iii ) Blower iv ) Exhauster

Description : State the function of following auxiliaries used in electric locomotive, i) Batteries ii ) Compressor iii ) Blower iv ) Exhauster 

Last Answer : Ans: 1) Batteries - supply to run baby compressor which supplies air for initial raising of pantograph and closing of air blast circuit breaker. 2) Compressor - supply air for operation, control and ... blower, reactor blower, SCR blower, traction motor blower etc. 4) Exhausters - for vacuum brakes.

Explain the surge protection of electric locomotive from i) Direct lightening stroke ii) Switching surges

Description : Explain the surge protection of electric locomotive from i) Direct lightening stroke ii) Switching surges

Last Answer : i)Protection of Electric Locomotive From Direct Lightening Stroke:  1. The direct lightning strokes may strike on the overhead conductor on the roof of the locomotive. 2. To protect the ... reduce the steepness of the wave front and also help to absorb the energy in the resistance.

Draw a neat labelled block diagram of AC electric locomotive. State the function of each part.

Description : Draw a neat labelled block diagram of AC electric locomotive. State the function of each part.

Last Answer : labelled diagram ofAC electric locomotive:  Function of AC electric locomotive Parts: 1) Overhead contact wire: Supply of 1-ph, 25KV, 50Hz, AC is given to overhead conductor. 2) Current collecting ... mechanical power to run the train i.e. DC series motor which is used as traction motor.

In a steam locomotive electric power is provided through?

Last Answer : In a steam locomotive electric power is provided through small turbo-generator.

How does electric locomotive work?

Description : How does electric locomotive work?

Last Answer : Electric  locomotives  are  powered   by  motors  connected  to  battery  or  any  supply . The  electric  supply  is  connected  to  a  motor  which  drives  set  of  gears  connected  to  wheels.

List any two types of relays and contactors with their function used in AC locomotive.

Description : List any two types of relays and contactors with their function used in AC locomotive.

Last Answer : Types of relays and their function in AC locomotive: 1) Buchholz Relay: To protect traction transformer from incipient faults. 2) Earth fault or Ground fault Relay: To protect the system against all kinds of ... is engaged with cam on shaft. Cam shaft can be moved by air engine or vane motor. 

Draw neat labeled diagram of single phase AC locomotive showing its various equipments of power circuit and give function of each equipment used in power circuit.

Description : Draw neat labeled diagram of single phase AC locomotive showing its various equipments of power circuit and give function of each equipment used in power circuit.

Last Answer : Functions of equipment: 1) circuit breaker: disconnects the locomotive equipment from the supply in the event of fault in the equipment / loco. 2) On load tap changer, used to control the ... 6) Traction motor: operates as per the required operating characteristics to take on the traction load.

State the function of a contactor in a power circuit of locomotive. List different types of it and state one application of each.

Description : State the function of a contactor in a power circuit of locomotive. List different types of it and state one application of each.

Last Answer : Ans: Contactor in power circuit of locomotive is used to connect relevant sections for operation. Connecting or disconnecting the power circuit at different conditions of operation and at different locations. ... heavy power currents. 3) Cam & roller operated - used for group switching.

Give broad classification of maintenance with meaning of each type. State the factors on which ideal maintenance of electric rolling stock is judged. Give any two means to improve any one factor of these.

Description : Give broad classification of maintenance with meaning of each type. State the factors on which ideal maintenance of electric rolling stock is judged. Give any two means to improve any one factor of these.

Last Answer : Ans: Classification: 1) Running repairs - carried out when the equipment has actually failed.  2) Trouble shooting - involves rectification of the defects by making temporary repair so that ... and operating staff , coordination of work at shed , availability of standby and quality spares 

Draw a neat sketch of ‘Locomotive coupler’ mechanism. Explain its working in brief.

Description : Draw a neat sketch of ‘Locomotive coupler’ mechanism. Explain its working in brief.

Last Answer : Figure: Coupler Rod of Locomotive  (Link AD = Link BC = Crank Link CD = Coupling Rod Link AB = Fixed Link = Frame) Working of Coupler Rod of Locomotive: It is an ... center distance between them. This mechanism is meant for transmitting rotary motion from one wheel to the other wheel.

Explain with neat sketch overload protection for power circuit of locomotive.

Description : Explain with neat sketch overload protection for power circuit of locomotive.

Last Answer : Overload Protection for Power Circuit of Locomotive:  1. To protect the main power circuit from overload, the thermal overload relays are used. 2. The overload is sensed by the ... overload relay OLR3 operates for overload fault on traction motor due to the flashover of traction motors. 

Explain protection of locomotive from overvoltage and under voltage

Description : Explain protection of locomotive from overvoltage and under voltage

Last Answer : Protection of Locomotive From Overvoltage and Under Voltage: 1. For protection against over voltages the over voltage relay which is basically a potential transformer (PT) is used. 2. ... a relay triggering an alarm, which enables the power controller to react and take corrective measures.

The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is 15 N per kN, the maximum speed that the locomotive can attain on level track will be a.43 kmph b.83 kmph c.103 kmph d.107 dynes e.38 kmph

Description : The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is 15 N per kN, the maximum speed that the locomotive can attain on level track will be a.43 kmph b.83 kmph c.103 kmph d.107 dynes e.38 kmph

Last Answer : e. 38 kmph

The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is qN per kN, the maximum speed that the locomotive can attain on level track will be a.103 kmph b.83 kmph c.107 dynes d.43 kmph e.63 kmph

Description : The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is qN per kN, the maximum speed that the locomotive can attain on level track will be a.103 kmph b.83 kmph c.107 dynes d.43 kmph e.63 kmph

Last Answer : e. 63 kmph

A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in 10 sec. The distance between the locomotive and the wagons at this instant assuming that the forces acting on the train are unaltered would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Description : A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in ... would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Last Answer : d. 0.5 m

What was the the name of the first steam powered locomotive by George Stephenson?

Description : What was the the name of the first steam powered locomotive by George Stephenson?

Last Answer : Rocket*Skinny mini*

Who was the first African American locomotive engineer for Houston Beltway Terminal?

Description : Who was the first African American locomotive engineer for Houston Beltway Terminal?

Last Answer : Feel Free to Answer

How much is a 2 cents Locomotive 1870 stamp worth?

Description : How much is a 2 cents Locomotive 1870 stamp worth?

Last Answer : Feel Free to Answer

Match the following: List-I List-II A. Varanasi I. Indian Rare Earths Ltd B. Koyali II. Hindustan Machine Tools Ltd C. Pinjore III. Diesel Locomotive Works D. Alwaye IV. Petro-Chemical Complex Codes: A B C D (a) I II III IV (b) IV III II I (c) III IV II I (d) III IV I II

Description : Match the following: List-I List-II A. Varanasi I. Indian Rare Earths Ltd B. Koyali II. Hindustan Machine Tools Ltd C. Pinjore III. Diesel Locomotive Works D. Alwaye IV. Petro-Chemical Complex Codes: A B C D (a) I II III IV (b) IV III II I (c) III IV II I (d) III IV I II

Last Answer : Ans: (c)

Diesel locomotive works of the Indian Railways is situated at- (1) Mumbai (2) Bangalore (3) Varanasi (4) Hyderabad

Description : Diesel locomotive works of the Indian Railways is situated at- (1) Mumbai (2) Bangalore (3) Varanasi (4) Hyderabad

Last Answer : (3) Varanasi Explanation: India has the 4th largest coal reserves in the world. Indian mineral industry has contributed significantly to make the nation self-sufficient in coal. To meet the ... other users, the production trends in coal and lignite sectors have shown a remarkable increasing trend.

Locomotive boiler tubes are made of __________ alloys. (A) Arsenic copper (B) Magnesium (C) Aluminium (D) Nickel

Description : Locomotive boiler tubes are made of __________ alloys. (A) Arsenic copper (B) Magnesium (C) Aluminium (D) Nickel

Last Answer : (A) Arsenic copper

If is the speed of a locomotive in km per hour, g is the acceleration due to gravity, is the distance between running faces of the rails and is the radius of the circular curve, the required super elevation is (A) gV²/GR (B) Rg/GV² (C) GR/gV² (D) GV²/gR

Description : If is the speed of a locomotive in km per hour, g is the acceleration due to gravity, is the distance between running faces of the rails and is the radius of the circular curve, the required super elevation is (A) gV²/GR (B) Rg/GV² (C) GR/gV² (D) GV²/gR

Last Answer : (D) GV²/gR

Which of the following is used to produce draught in the locomotive boilers? (A) Chimney (B) Induced draught fan (C) Forced draught fan (D) Steam jet arrangement

Description : Which of the following is used to produce draught in the locomotive boilers? (A) Chimney (B) Induced draught fan (C) Forced draught fan (D) Steam jet arrangement

Last Answer : Option D

Among which locomotive steam engines have the highest efficiency? a) 1 MW b) 2 MW c) 30 MW d) 660 MW

Description : Among which locomotive steam engines have the highest efficiency? a) 1 MW b) 2 MW c) 30 MW d) 660 MW

Last Answer : d) 660 MW

Which of these is a stationary boiler? • Locomotive boiler • Marine boiler • Mobile boiler • Babcock Wilcox boiler

Description : Which of these is a stationary boiler? • Locomotive boiler • Marine boiler • Mobile boiler • Babcock Wilcox boiler

Last Answer : • Babcock Wilcox boiler

Which of the following boiler is best suited to meet the fluctuating demand of steam....... A locomotive boiler. B Lancashire boiler C Cornish boiler D Babcock and wilcox boiler

Description : Which of the following boiler is best suited to meet the fluctuating demand of steam....... A locomotive boiler. B Lancashire boiler C Cornish boiler D Babcock and wilcox boiler

Last Answer : A locomotive boiler.

Which of the following is a water tube boiler........ A]Locomotive boiler B]Lancashire boiler C]Cornish boiler D]Babcock and wilcox boiler

Description : Which of the following is a water tube boiler........ A]Locomotive boiler B]Lancashire boiler C]Cornish boiler D]Babcock and wilcox boiler

Last Answer : in a Truss structure and nature of reactive force is in the nature of

Which of the following boiler is best suited to meet the fluctuating demand of steam....... A]Locomotive boiler. B]Lancashire boiler C]Cornish boiler D]Babcock and wilcox boiler

Description : Which of the following boiler is best suited to meet the fluctuating demand of steam....... A]Locomotive boiler. B]Lancashire boiler C]Cornish boiler D]Babcock and wilcox boiler

Last Answer : A]Locomotive boiler.

The draught in locomotive boilers is produced by a ___________ a) Chimney b) Centrifugal fan c) Steam jet d) All of the above

Description : The draught in locomotive boilers is produced by a ___________ a) Chimney b) Centrifugal fan c) Steam jet d) All of the above

Last Answer : c) Steam jet

Locomotive boiler has a) 137 fire tubes and 44 superheated tubes b) 147 fire tubes and 34 superheated tubes c) 157 fire tubes and 24 superheated tubes d) 167 fire tubes and 14 superheated tubes

Description : Locomotive boiler has a) 137 fire tubes and 44 superheated tubes b) 147 fire tubes and 34 superheated tubes c) 157 fire tubes and 24 superheated tubes d) 167 fire tubes and 14 superheated tubes

Last Answer : c) 157 fire tubes and 24 superheated tubes

Locomotive was invented by Peter Couper in: (a) 1820 (b) 1830 (c) 1835

Description : Locomotive was invented by Peter Couper in: (a) 1820 (b) 1830 (c) 1835

Last Answer : (b) 1830

RBG loading caters for maaaaximum axle load of…….tones for locomotive with trailing loadof…… tonnes/metre of track with maximum axle load of…….tonnes for wagons a)22.9,7.67,25 b)22.5,7.67,22.9* c)25,7.67,22.9, d)None of above

Description : RBG loading caters for maaaaximum axle load of…….tones for locomotive with trailing loadof…… tonnes/metre of track with maximum axle load of…….tonnes for wagons a)22.9,7.67,25 b)22.5,7.67,22.9* c)25,7.67,22.9, d)None of above

Last Answer : b)22.5,7.67,22.9*

GML loading caters for maaaaximum axle load of…….tonnes for locomotive with trailing load of………tonnes/metre. a)22.9,7.67* b)22.5,7.67 c)25,7.67 d)None of above

Description : GML loading caters for maaaaximum axle load of…….tonnes for locomotive with trailing load of………tonnes/metre. a)22.9,7.67* b)22.5,7.67 c)25,7.67 d)None of above

Last Answer : a)22.9,7.67*

A train locomotive whose mass is 1 x 106 kilograms is traveling EAST at a speed of 100 kilometers per hour. A NORTHERLY wind is applying a force of 100 Newtons on the locomotive. How much work is the wind doing on the locomotive for each 10 meters it travels? w) 0 joules x) 1,000 joules y) 10,000 joules z) 100,000 joules

Description : A train locomotive whose mass is 1 x 106 kilograms is traveling EAST at a speed of 100 kilometers per hour. A NORTHERLY wind is applying a force of 100 Newtons on the locomotive. How much work is the wind doing ... 10 meters it travels? w) 0 joules x) 1,000 joules y) 10,000 joules z) 100,000 joules

Last Answer : ANSWER: W -- 0 JOULES

State the classification of locomotive.

Description : State the classification of locomotive.

Last Answer : Classification of Locomotive:  A) Based on the types of service rendered:  1. Freight service for transportation of goods only.  2. Passenger service for transportation of passengers.  3. Mixed traffic ... the type of supply used:  1. Alternating current (AC)  2. Direct current (DC)

Locomotive having monomotor bogies?

Last Answer : Locomotive having monomotor bogies has better coefficient of adhesion, are suited both for passanger as well as freight service, has better riding qualities due to the reduction of lateral forces.

method can bring the locomotive to dead stop.

Last Answer : Plugging braking method can bring the locomotive to dead stop.

For given maximum axle load tractive efforts of AC. locomotive will be?

Last Answer : For given maximum axle load tractive efforts of AC. locomotive will be more than that of D.C. locomotive.

The overall efficiency of steam locomotive is around?

Last Answer : The overall efficiency of steam locomotive is around 5 to 10 percent.

Which locomotive has the highest operational availability.

Last Answer : Electric locomotive has the highest operational availability.

The speed of a locomotive is controlled by?

Last Answer : The speed of a locomotive is controlled by gear box.

How much maintenance and repair is on an electric vehicle?

Description : How much maintenance and repair is on an electric vehicle?

Last Answer : %100 maintenance you have to maintain your vehicle electric too avoid develope fault You can also repair it by consulting the expert in charge of the case

When disassembling electric motors for maintenance or overhaul, ________________. A. punch mark frame and end bells for proper assembly B. wrap bearings in lint free cloths if they are to be reused C. tag and store small parts in a box D. all of the above

Description : When disassembling electric motors for maintenance or overhaul, ________________. A. punch mark frame and end bells for proper assembly B. wrap bearings in lint free cloths if they are to be reused C. tag and store small parts in a box D. all of the above

Last Answer : Answer: D

The electric power generation cost in nuclear power plant is less than that in a coal based thermal power plant, mainly because the (A) Fuel cost per unit power generated is less (B) Thermal efficiency of the former is higher (C) Maintenance cost of the former is less (D) None of these

Description : The electric power generation cost in nuclear power plant is less than that in a coal based thermal power plant, mainly because the (A) Fuel cost per unit power generated is less (B) Thermal efficiency of the former is higher (C) Maintenance cost of the former is less (D) None of these

Last Answer : (A) Fuel cost per unit power generated is less

Explain the maintenance of lead acid battery.

Description : Explain the maintenance of lead acid battery.

Last Answer : Maintenance of lead acid battery: 1) Keep the container surface dry by using dry cloths. 2) Tighten the terminal connections. 3) Battery should not be discharged below a minimum voltage. 4) Never keep battery ... -container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Compare pin type and suspension insulators on given points: (i) Position of insulator on cross arm. (ii) Position of conductor on insulator. (iii) Reaction on cross arm. (iv) Possibility of flash over due to large birds (v) Maintenance/Replacement cost (vi) Maximum voltage level (vii) Effect on height of supporting structure. (viii) Life

Description : Compare pin type and suspension insulators on given points: (i) Position of insulator on cross arm. (ii) Position of conductor on insulator. (iii) Reaction on cross arm. (iv) Possibility of ... Replacement cost (vi) Maximum voltage level (vii) Effect on height of supporting structure. (viii) Life 

Last Answer : S.No  Points Pin Type insulator Suspension or Disc Type insulator 1 Position of insulator on cross arm It is fixed on top of cross arm by using galvanized steel pin. So it is ... so to maintain minimum ground clearance height of pole increase.  8 Life Less More

Steps to carry out the maintenance of lead acid batteries

Description : Steps to carry out the maintenance of lead acid batteries

Last Answer : Steps to carry out the maintenance of lead acid batteries: 1) Keep the container surface dry by using dry cloths. 2) Tighten the terminal connections. 3) Battery should not be discharged ... 9) During initial charging use fresh electrolyte. 10) Avoid overcharging and short circuit of plates.

List any four characteristics of efficient maintenance.

Description : List any four characteristics of efficient maintenance.

Last Answer : Ans: Characteristics of Efficient Maintenance:  1) Planning of schedule.  2) Investigation of failures.  3) Repair facilities such as adequate staff, shed, plant and machinery.  4 ... for maintenance spares.  7) Inspection of stores purchased according to working drawings and specifications.