Explain with neat diagram trolley collector for overhead system

Explain with neat diagram trolley collector for overhead system
by

1 Answer

Answer :

Trolley Collector for Overhead System: 

image

This consists of a grooved gun metal wheel or grooved slider shoe with carbon insert carried attached to the end of a long pole provided on the top of the car. Other end of this pole is hinged to a swiveling base fixed to roof of vehicle. Necessary upward pressure for the pole and current collector is achieved by means of springs. As two trolley wires are required for a trolley bus a separate trolley collector is provided for each wire, the bases being mounted side by side. The pressure for wheel is approximately 10kg and for a carbon insert slider is approximately 17kg. The main drawback of trolley collector is that it has to be rotated through 180° for reversing the direction of motion of the vehicle. Another drawback is that there is poor contact between the wheel and trolley wire which gives rise to high current density. Suitable for comparative low speed (say 22 to 30 kmph).

by

Related questions

Explain with neat diagram i) Sectioning and paralleling post ii) Sub sectioning post

Description : Explain with neat diagram i) Sectioning and paralleling post ii) Sub sectioning post

Last Answer : i) Sectioning and Paralleling Post: Explanation of Sectioning and Paralleling Post: 1. The power supply arrangement is as shown in above figure for two track lines between feeding posts and ... subsection or the other. 4. There is no interrupter for paralleling the up and down track line

List any four current collectors for overhead system. State application of each.

Description : List any four current collectors for overhead system. State application of each.

Last Answer : Current Collectors for Overhead System With Their Application: 1. Trolley (Pole) collector: It is used for trolley buses having speed range from 20kmph to 32kmph. 2. Cable collector: This ... used for main line service locomotives, urban trains, suburban trains etc. having higher speed range.

Explain with neat sketch overload protection for power circuit of locomotive.

Description : Explain with neat sketch overload protection for power circuit of locomotive.

Last Answer : Overload Protection for Power Circuit of Locomotive:  1. To protect the main power circuit from overload, the thermal overload relays are used. 2. The overload is sensed by the ... overload relay OLR3 operates for overload fault on traction motor due to the flashover of traction motors. 

With neat sketch explain automatic weight tension and temperature compensation.

Description : With neat sketch explain automatic weight tension and temperature compensation.

Last Answer : Automatic Weight Tension and Temperature Compensation: The tension in overhead lines in traction systems depends on the temperature. Higher temperatures lead to expansion of conductors and hence sag. It is therefore ... figure. The tension in the contact wire and catenary is around 1000 kg.

Draw the neat sketch of overhead valve operating mechanism and explain its working.

Description : Draw the neat sketch of overhead valve operating mechanism and explain its working.

Last Answer : Overhead valve mechanism: Figure shows the valve mechanism to operate the valve when it is in the cylinder head (in I and F head design). This type of mechanism requires two additional moving parts the push ... close. A spring (attached to the valve) returns the valve to its seated position.   

Describe push rod overhead valve operating mechanism with neat sketch.

Description : Describe push rod overhead valve operating mechanism with neat sketch.

Last Answer : Push rod Overhead valve operating mechanism (OHV 4 -S engine): An overhead valve engine (OHV engine) is an engine in which the valves are placed over the cylinder head. The camshaft drive-chain ... . Overhead valve arrangement makes the engine slightly shorter than overhead camshaft.   OR  

Do you have a system when filling your trolley at the supermarket and bagging your purchases?

Description : Do you have a system when filling your trolley at the supermarket and bagging your purchases?

Last Answer : I usually muck about on the trolley, racing & spinning around, having imaginary cop chases with other unsuspecting shoppers. Handbrake turns in the aisles & drifting around the freezers, a family sized ... for a decent steering wheel & a large pack of flour substitutes for a good quality airbag.

Explain protection of locomotive from overvoltage and under voltage

Description : Explain protection of locomotive from overvoltage and under voltage

Last Answer : Protection of Locomotive From Overvoltage and Under Voltage: 1. For protection against over voltages the over voltage relay which is basically a potential transformer (PT) is used. 2. ... a relay triggering an alarm, which enables the power controller to react and take corrective measures.

Explain the surge protection of electric locomotive from i) Direct lightening stroke ii) Switching surges

Description : Explain the surge protection of electric locomotive from i) Direct lightening stroke ii) Switching surges

Last Answer : i)Protection of Electric Locomotive From Direct Lightening Stroke:  1. The direct lightning strokes may strike on the overhead conductor on the roof of the locomotive. 2. To protect the ... reduce the steepness of the wave front and also help to absorb the energy in the resistance.

Write down the circuit breaker with their rating used in traction substation. Explain any one.

Description : Write down the circuit breaker with their rating used in traction substation. Explain any one.

Last Answer : Circuit Breaker With Their Rating Used in Traction Substation: Rated capacity of a circuit breaker is 750Amps at 25 kV, 500MVA. Its overall tripping time is 0.14 seconds composed of 0.04 ... but in case of traction substation application, mostly Minimum Oil Circuit Breaker (MOCB) is preferred.

Draw and explain in brief construction of Diamond Pantograph. Write one advantage and one disadvantage of it.

Description : Draw and explain in brief construction of Diamond Pantograph. Write one advantage and one disadvantage of it.

Last Answer : Diamond Pantograph: Construction of Diamond Pantograph: 1)Diamond Pantograph consist of pressed steel channel sectional fitted with renewable collector strips and supported at the apex of Pentagonal ... It requires more maintenance than Faiveley type. 4. It is costlier than Faiveley type.

Explain the following - 1) Encumbrance 2) Span length.

Description : Explain the following - 1) Encumbrance 2) Span length.

Last Answer : Encumbrance: It is the axial distance between catenary and contact wire. Its value is maintained at 1.4 m as per rules except at i) Turn outs, ii) Overlaps iii) In the vicinity of over ... depends various factors like: i) Wind pressure ii) Curvatures iii) Current collection point of view etc.

The diagram shown in the illustartion represents a/an _____________. EL-0022 A. magnectic amplifier B. common base amplifier C. common collector amplifier D. common emitter amplifier

Description : The diagram shown in the illustartion represents a/an _____________. EL-0022 A. magnectic amplifier B. common base amplifier C. common collector amplifier D. common emitter amplifier

Last Answer : Answer: D

In McCabe-Thiele method, at infinite reflux ratio (A) Number of plates is maximum (B) Overhead product is maximum (C) Both the operating lines coincide with the diagram (D) None of these

Description : In McCabe-Thiele method, at infinite reflux ratio (A) Number of plates is maximum (B) Overhead product is maximum (C) Both the operating lines coincide with the diagram (D) None of these

Last Answer : (C) Both the operating lines coincide with the diagram

Based on the diagram shown, what kind of lens is used to make the overhead projector? (a) concave lenses (b) convex lenses (c) bifocal lenses (d) flat lenses

Description : Based on the diagram shown, what kind of lens is used to make the overhead projector? (a) concave lenses (b) convex lenses (c) bifocal lenses (d) flat lenses

Last Answer : (b) convex lenses

Give any four advantages of voice frequency signaling over DC signaling system.

Description : Give any four advantages of voice frequency signaling over DC signaling system. 

Last Answer : Advantages of Voice Frequency Signaling Over DC Signaling System: 1. Large number of circuits can be easily derived over a single pair of wires (single pair can control 18 stations). 2. Signal ... used over long distances. 5. Can be used where large number of equipment can be controlled. 

List any four weaknesses of LIM propelled railway traction system.

Description : List any four weaknesses of LIM propelled railway traction system.

Last Answer : Weaknesses of LIM Propelled Railway Traction System: 1. The system requires looping of all reaction rails all along the route. This considerably adds to the cost of track. 2. Since Al is relative ... in the magnetic and electric circuits at entry and exit ends of motor, poor motor efficiency.

Give any four advantages of remote control system.

Description : Give any four advantages of remote control system.

Last Answer : Advantages of remote control system: 1. As substations and control posts are unattended (due to remote controls) there is considerable savings due to less manpower. 2. Central control station ... Switching operations are carried out safely, quickly, and economically. 6. Maintenance cost is low.

How does propulsion of diesel and electric (trolley) buses differ?

Description : How does propulsion of diesel and electric (trolley) buses differ?

Last Answer : Less weight. And, electric motor has more torque.

Boston Old Town Trolley Tour? Do you recommend?

Description : Boston Old Town Trolley Tour? Do you recommend?

Last Answer : answer:Haven't taken the Old Town trolley tour in Boston but I have in other cities. I think it's well worth doing for a good overview and definitely not a rip-off. Otherwise, walking around Boston ... Durgin Park is a must. Oh - and afternoon tea in either the Copley Plaza or the Ritz Carlton.

Where can I get best garbage trolley suppliers in uae ?

Description : Where can I get best garbage trolley suppliers in uae ?

Last Answer : At Bluestream, you can get garbage trolley suppliers. It is one of the best garbage trolley suppliers in UAE. They offer high quality of custom designed product , to enhance the environment in ... for all and works very closely with their clients to ensure that they fulfil all their requirements.

The string in fig. is passing over small smooth pulley rigidly attached to trolley A. If the speed of trolley is constant and qual to `v_(A)` towards

Description : The string in fig. is passing over small smooth pulley rigidly attached to trolley A. If the speed of trolley is constant and qual to `v_(A)` towards

Last Answer : The string in fig. is passing over small smooth pulley rigidly attached to trolley A. If the speed of trolley is constant ... =0` D. `V_(B)=4/5 V_(A)`

If a trolley collides with a stationary trolley of double mass, then they move off with A. half of the original velocity B. one third of original velocity C. double the original velocity D. triple the original velocity

Description : If a trolley collides with a stationary trolley of double mass, then they move off with A. half of the original velocity B. one third of original velocity C. double the original velocity D. triple the original velocity

Last Answer : one third of original velocity

In a springy collision, if the fast moving trolley collides with a slow one, then the fast one will bounce back at speed of A. slow one B. less than slow one C. more than slow one D. with the same speed as before

Description : In a springy collision, if the fast moving trolley collides with a slow one, then the fast one will bounce back at speed of A. slow one B. less than slow one C. more than slow one D. with the same speed as before

Last Answer : slow one

Mark correct option relating to limit of weigh of mails a) The weight to be carried by mail runner on a man should not exceed 14 Kg b) When it is carried by each man should not exceed 28 Kg c) When it is carried by trolley the weight of the parcel should not exceed 37 Kg d) The weight of postal articles including parcel and cash to be carried by a postman or village postman should not exceed 10 kg e) All the above

Description : Mark correct option relating to limit of weigh of mails a) The weight to be carried by mail runner on a man should not exceed 14 Kg b) When it is carried by each man should not exceed 28 Kg c) ... and cash to be carried by a postman or village postman should not exceed 10 kg e) All the above

Last Answer : e) All the above

A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span (A) 2.5 cm (B) 3.0 cm (C) 4.0 cm (D) 5.0 cm

Description : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20  meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span  (A) 2.5 cm  (B) 3.0 cm  (C) 4.0 cm  (D) 5.0 cm 

Last Answer : (C) 4.0 cm

Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck

Description : Which of the following material handling equipments is not suitable for moving materials in varying paths? (A) Hand trolley (B) Belt conveyor (C) Crane (D) Truck

Last Answer : (B) Belt conveyor

Abbreviation of PTFE is……… 11. Trolley

Description : Abbreviation of PTFE is……… 11. Trolley

Last Answer : Poly Tetra Fluoro Ethylene

Spacing of Trolley refuges a) Every 100m b) If span is more than 100m, on each pier c) Ballasted deck bridges – every 50m d) All the above*

Description : Spacing of Trolley refuges a) Every 100m b) If span is more than 100m, on each pier c) Ballasted deck bridges – every 50m d) All the above*

Last Answer : d) All the above*

Maximum distance apart of trolley refuges on bridges with main spans of 100metre or more is i. 50 mtr j. 100 mtr k. 200 mtr l. a refuge over each pair*

Description : Maximum distance apart of trolley refuges on bridges with main spans of 100metre or more is i. 50 mtr j. 100 mtr k. 200 mtr l. a refuge over each pair*

Last Answer : l. a refuge over each pair*

A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart...

Description : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span?

Last Answer : A trolley wire weighs 1.2 kg per meter length. The ends of the wire are attached to two poles 20 meters apart. If the horizontal tension is 1500 kg find the dip in the middle of the span 4.0 cm.

Explain with neat sketch block diagram of optical fiber communication system and list out sources and detectors suitable for it.

Description : Explain with neat sketch block diagram of optical fiber communication system and list out sources and detectors suitable for it.

Last Answer : OR 1. The light source is normally an infrared LED or LASER device which is driven by the current value from the V to I convertor. It emits light which is proportional ... optical energy electrical signal. The light detectors which are used as PIN photodiode and avalanche photo diode.

Explain microcontroller based antilock brake system with neat block diagram.

Description : Explain microcontroller based antilock brake system with neat block diagram.

Last Answer : An ABS is a system on motor vehicles which prevents the wheels from locking while braking stopping safely is one of the most important functions a motor vehicle can perform ... valves to decrease the pressure on the braking circuit, effectively reducing the braking force on that wheel.

With neat circuit diagram explain working of emergency light system.

Description : With neat circuit diagram explain working of emergency light system. 

Last Answer : Emergency lighting system:  In the residential, commercial and industrial areas, the illumination system work with available AC supply. In the event of AC supply failure, partial illumination can be ... glows. In rthis way, on failure of AC supply, light is obtained from DC supply.

With a neat diagram, explain gas engine co-generation system.

Description : With a neat diagram, explain gas engine co-generation system.

Last Answer : Gas engine co-generation system:  Spark Ignition Gas Engine: These engines have shaft efficiency near about 35% but low capital cost/kW comparing to compression idnition engine. Temperature rangr ... ignition engines require complex cooling system as compared to spark ignition gas engine.

With a neat diagram, explain back pressure steam turbine co-generation system.

Description : With a neat diagram, explain back pressure steam turbine co-generation system.

Last Answer : Back pressure steam turbine co-generation system: In this type steam enters the turbine chamber at High Pressure and expands to Low or Medium Pressure. Enthalpy difference is used for generating power / work. ... , the overall thermal efficiency of the system could reach as much as 90 percent.

With neat diagram explain use of “reactive power controller” to reduce technical losses in transmission and distribution system.

Description : With neat diagram explain use of “reactive power controller” to reduce technical losses in transmission and distribution system.

Last Answer : Reactive power compensation in Transmission and Distribution systems: The reactive power is present in lines due to the reactive loads and device/ component reactance. This leads to heavy currents for active ... switched to the line as per the requirement of lagging or leading reactive VA. 

With neat diagram explain the following terms: (i) Steam turbine co-generation system (ii) Gas turbine co-generation system

Description : With neat diagram explain the following terms: (i) Steam turbine co-generation system (ii) Gas turbine co-generation system

Last Answer : (i) Steam turbine co-generation system: The two types of steam turbines most widely used are the backpressure and the extraction. Another variation of the steam turbine topping ... power. The exhaust or the extracted steam from the steam turbine provides the required thermal energy.

List different types of signals. State application of each.

Description : List different types of signals. State application of each.

Last Answer : Different Types of Signals: 1) Flag signals: This is shown by signalman if green flag is raised; it means to proceed with caution. Green flag shown down, it means there is track defect; ... green lamps indicate indications as in the 2-aspect system, and the yellow lamp shows the caution indication.

Give protection scheme used for 25kV catenary protection for AC traction.

Description : Give protection scheme used for 25kV catenary protection for AC traction.

Last Answer : Protection Scheme Used for 25kV Catenary Protection for AC Traction: As shown in the figure below the scheme consists of 1) MHO relay that makes use of the impedance phase angle to get proper ... adjustment. 2) Over current relay. 3) Under voltage relay for low voltage protection.

State four important features of LEM that differ it from normal electric motor.

Description : State four important features of LEM that differ it from normal electric motor. 

Last Answer : Important Features of LEM That Differ it From Normal Electric Motor: 1. In LEM, primary & secondary or stator & rotor have longitudinal arrangement while normal electric motor has circular ... in high speed levitated system while normal electric motor is used for rotary mechanical output.

State any four relays used for catenary protection. State function of each relay.

Description : State any four relays used for catenary protection. State function of each relay.

Last Answer : Relays Used for Catenary Protection: 1. MHO relay: Wrong coupling protection. 2. MHO relay: Over current protection at farthest point. 3. Over current relay: Over current protection against faults near substation 4. Under voltage relay: Protection against faults far away from substation. 

State the classification of locomotive.

Description : State the classification of locomotive.

Last Answer : Classification of Locomotive:  A) Based on the types of service rendered:  1. Freight service for transportation of goods only.  2. Passenger service for transportation of passengers.  3. Mixed traffic ... the type of supply used:  1. Alternating current (AC)  2. Direct current (DC)

Give the purpose and location of neutral section and section insulator.

Description : Give the purpose and location of neutral section and section insulator. 

Last Answer : Purpose of Neutral section: Passing of pantograph under insulated overlap will cause short circuit between two phases, damaging OHE & pantograph. To avoid this bridging, a neutral section is inserted between them ... Location: Located at cross over from one track to other, from main line to siding.

What is time multiplexed space switching? With a neat diagram explain its operation.

Description : What is time multiplexed space switching? With a neat diagram explain its operation.

Last Answer : Time division switches where an inlet or an outlet corresponded to a single subscriber line with one speech sample appearing every 125 µs on the line. Such switches are used in local exchanges. We now ... / Mt , Where t is the switching time including memory access time per inlet-outlet pair.  

Explain with neat diagram the different hazards and the way to eliminate them.

Description : Explain with neat diagram the different hazards and the way to eliminate them.

Last Answer : • Classification of hazards • Static hazard & Dynamic hazard definitions • K map for selected functions • Method of elimination • Essential hazards

Explain the operation of a full wave bridge rectifier with π filter using a neat diagram. Draw input and output waveforms.

Description : Explain the operation of a full wave bridge rectifier with π filter using a neat diagram. Draw input and output waveforms.

Last Answer : During positive half-cycle of input, the secondary voltage VAB is positive, so diodes D1 and D2 forward biased and D3 and D4 reverse biased. The load current flows from terminal A ... smooth DC voltage appears across the load. The input and output waveforms are shown in the figure.

Explain working,construction of filter leaf with neat diagram.

Description : Explain working,construction of filter leaf with neat diagram. 

Last Answer : Construction of filter leaf   It consists of metal frame enclosing a wire screen or a grooved plate. The screen is covered by filter cloth which is fitted in frame, to grip the cloth. The frame ... . The cake can be washed by immersing in a vessel containing water or reverse flow of air

Explain working of fluid energy mill with a neat diagram.

Description : Explain working of fluid energy mill with a neat diagram.

Last Answer : Working:  1. The material which is to be size reduced is fed in the grinding chamber from the bottom through the feed inlet. 2. The air or inert gas is introduced with a very high pressure through ... particle size to the order of 100# and then passed through fluid energy mill. Diagram:   

Explain with neat diagram how transistor can be used as a switch.

Description : Explain with neat diagram how transistor can be used as a switch.

Last Answer : In Bipolar Transistor as a Switch the biasing of the transistor, either NPN or PNP is arranged to operate the transistor at both sides of the I-V characteristics curves. The areas ... possible and maximum current flowing through the transistor. Therefore the transistor is switched Fully-ON .