Which of the following environmental conditions are essential for optimum growth of Mucor on a piece of bread ? A. Temperature of about 25°C B. Temperature of about 5°C C. Relative humidity of about 5% D. Relative humidity of about 95% E. A shady place F. A brightly illuminated place Choose the answer from the following options. (a) B, C and F only (b) A, C and E only (c) A, D and E only (d) B, D and E only

Which of the following environmental conditions
are essential for optimum growth of Mucor on a
piece of bread ?
A. Temperature of about 25°C
B. Temperature of about 5°C
C. Relative humidity of about 5%
D. Relative humidity of about 95%
E. A shady place
F. A brightly illuminated place
Choose the answer from the following options.
(a) B, C and F only (b) A, C and E only
(c) A, D and E only (d) B, D and E only
by

1 Answer

Answer :

(c) A, D and E only
by

Related questions

The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Description : The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Last Answer : (C) 35°C

Which of the following are optimum temperature conditions for making benzenediazonium chloride from aniline? (a) 0°C to 10°C (b) 20°C to 25°C (c) 30°C to 40°C (d) 45°C to 50°C

Description : Which of the following are optimum temperature conditions for making benzenediazonium chloride from aniline? (a) 0°C to 10°C (b) 20°C to 25°C (c) 30°C to 40°C (d) 45°C to 50°C

Last Answer : 0°C to 10°C

The optimum temperature for the Banana crop is— (A) 30°C (B) 23°C (C) 21•5°C (D) 26•5°C

Description : The optimum temperature for the Banana crop is— (A) 30°C (B) 23°C (C) 21•5°C (D) 26•5°C

Last Answer : (B) 23°C

How does relative humidity over 95% cause excessive tape and head wear?

Description : How does relative humidity over 95% cause excessive tape and head wear?

Last Answer : High humidity causes increased friction as the tape passes over the heads.

Optimum temperature for potato tuber formation is a. 20-22°C b. 25-30°C c. 22-25°C d. All of these

Description : Optimum temperature for potato tuber formation is a. 20-22°C b. 25-30°C c. 22-25°C d. All of these

Last Answer : 20-22°C

Optimum temperature for maximum crop development in wheat is (a) 10-15°C(b) 20-25°C (c) 25-30°C (d) 30-35°C

Description : Optimum temperature for maximum crop development in wheat is (a) 10-15°C(b) 20-25°C (c) 25-30°C (d) 30-35°C

Last Answer : (b) 20-25°C

If the temperature of a piece increases suddenly, the relative humidity– (1) increases (2) decreases (3) remains constant (4) fluctuates

Description : If the temperature of a piece increases suddenly, the relative humidity– (1) increases (2) decreases (3) remains constant (4) fluctuates

Last Answer : (2) decreases Explanation: Relative humidity is the ratio of the partial pressure of water vapour in a airwater mixture to the saturated vapour pressure of water at a specific temperature.

What is the essential growth of and quantities development of fruits? a. Humidity b. Wind c. Solar Radiation d. Temperature e. Water

Description : What is the essential growth of and quantities development of fruits? a. Humidity b. Wind c. Solar Radiation d. Temperature e. Water

Last Answer : d. Temperature

When the relative humidity is below 10%, what happens to magnetic tape and parts of a tape recorder that could cause environmental damage?

Description : When the relative humidity is below 10%, what happens to magnetic tape and parts of a tape recorder that could cause environmental damage?

Last Answer : Dirt build-up caused by static electricity.

The optimum cardinal temparature point for germination of rice seeds is– 1) 20°C – 25°C 2) 18°C – 22°C 3) 30°C – 32°C 4) 37°C – 39°C

Description : The optimum cardinal temparature point for germination of rice seeds is– 1) 20°C – 25°C 2) 18°C – 22°C 3) 30°C – 32°C 4) 37°C – 39°C

Last Answer : 1) 20°C – 25°C

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

There is a certain club which is for men only. There are 600 men who belong to this club and 5% of these men wear one earring. Of the other 95% membership, half wear two earrings and the other half wear none. How many earrings are being worn in this club? -Riddles

Description : There is a certain club which is for men only. There are 600 men who belong to this club and 5% of these men wear one earring. Of the other 95% membership, half wear two earrings and the other half wear none. How many earrings are being worn in this club? -Riddles

Last Answer : Six hundred. We know that 5%, or 30 of the men are wearing one earring. Of the other 95%, or 570, we know that half are wearing two earrings and the other half none. This is the same as if they all wore one.

Glucose overload results in increased CO 2 production. Which of the following statements are true? A. In patients with respiratory insufficiency, administration of glucose as a principal calorie source is contraindicated. B. In patients with pulmonary infection and sepsis, calorie support should consist of 95% fat and 5% glucose. C. In Askanazi's study, increased CO 2 production and difficulty in weaning was associated only with pronounced overfeeding. D. CO 2 production should be measured in most patients who are supported by respirators in intensive care units and are receiving nutritional support.

Description : Glucose overload results in increased CO 2 production. Which of the following statements are true? A. In patients with respiratory insufficiency, administration of glucose as a principal calorie ... who are supported by respirators in intensive care units and are receiving nutritional support.

Last Answer : Answer: C DISCUSSION: Few papers have excited as much interest as that by Askanazi, Kinney, and co-workers, which demonstrated that glucose calories given to patients with severe respiratory ... the caloric requirement and glucose for the remainder, without much fear of excessive CO 2 production

.Fluoridation is the adjustment of the fluoride content of a community water supply to optimum levels for caries prevention. Which of the following statement is correct? A. Tooth decay declines by 90% to 95% B. Tooth decay declines by 45% to 55% C. Greater reduction in smooth surface caries from in pit and fissures D. Fluoridation increases vulnerability to osteoporosis

Description : .Fluoridation is the adjustment of the fluoride content of a community water supply to optimum levels for caries prevention. Which of the following statement is correct? A. Tooth decay ... in smooth surface caries from in pit and fissures D. Fluoridation increases vulnerability to osteoporosis

Last Answer : C. Greater reduction in smooth surface caries from in pit and fissures

The temperature at which water boils depends mainly on ------? A. Air temperature B. Relative humidity C. Air pressure (Answer) D. Air density E. The specific heat of air

Description : The temperature at which water boils depends mainly on ------? A. Air temperature B. Relative humidity C. Air pressure (Answer) D. Air density E. The specific heat of air

Last Answer : C. Air pressure (Answer)

Which of the following is true about the Accounts Receivable Lag and its implications on demand? a. If you offer no credit, demand falls to about 60% of normal. b. At 30 days, demand is 90%. c. At 45 days, demand is 95%. d. At 60 days, demand is 98.5%. e. At 90 days, demand is 100%.

Description : Which of the following is true about the Accounts Receivable Lag and its implications on demand? a. If you offer no credit, demand falls to about 60% of normal. b. At 30 days, demand is 90%. c. At 45 days, demand is 95%. d. At 60 days, demand is 98.5%. e. At 90 days, demand is 100%.

Last Answer : d. At 60 days, demand is 98.5%.

A manufacture undertakes to supply 2000 pieces of a particular component at Rs.25 per piece. According to his estimates, even if 5% fail to pass the quality tests, then he will make a profit of 25%. However as it turned out, 50% of the components were rejected. What is the loss to the manufacture? [TCS recruitment exam question] A. Rs 12,000 B. Rs 13,000 C. Rs 14,000 D. Rs 15,000 E. None f these

Description : A manufacture undertakes to supply 2000 pieces of a particular component at Rs.25 per piece. According to his estimates, even if 5% fail to pass the quality tests, then he will make a profit of 25%. However as it turned out, ... A. Rs 12,000 B. Rs 13,000 C. Rs 14,000 D. Rs 15,000 E. None f these

Last Answer : Answer - B. Rs 13,000 Explanation: 5% of 2000=100 so 2000-100=1900 so,if he sells 1900 he will get 25% profit cost per piece rs 25 so 25x 1900 don't solve here if 125% . ... /125=38000=CP if 50% rejected,only 1000 pieces sold so 1000 25=25000=SP loss=cp-sp= 38000-25000=13000

A temperature difference of 25°C is equivalent to a temperature difference of howmany F? -Do You Know?

Description : A temperature difference of 25°C is equivalent to a temperature difference of howmany F? -Do You Know?

Last Answer : answer:

A temperature difference of 25°C is equivalent to a temperature difference of howmany F?

Description : A temperature difference of 25°C is equivalent to a temperature difference of howmany F?

Last Answer : 45° F

The weather condition is optimum for herbicidal weed control? a). High temperature low humidity b). High temperature high humidity c). warm temperature high humidity d). cold temperature low humidity

Description : The weather condition is optimum for herbicidal weed control? a). High temperature low humidity b). High temperature high humidity c). warm temperature high humidity d). cold temperature low humidity

Last Answer : c). warm temperature high humidity

At what time of day is the relative humidity normally at a minimum -------- ? A. When the air temperature is highest (Answer) B. Just before sunrise C. About midnight D. When the air temperature is lowest

Description : At what time of day is the relative humidity normally at a minimum -------- ? A. When the air temperature is highest (Answer) B. Just before sunrise C. About midnight D. When the air temperature is lowest

Last Answer : A. When the air temperature is highest (Answer)

An ideal air standard Otto cycle has a compression ratio of 8.5. If the ratio of the specific heats is 1.4, then what is thermal efficiency (in percentage) of the Otto cycle? a. 57.5% b. 45.7% c. 52.5% d. 95%

Description : An ideal air standard Otto cycle has a compression ratio of 8.5. If the ratio of the specific heats is 1.4, then what is thermal efficiency (in percentage) of the Otto cycle? a. 57.5% b. 45.7% c. 52.5% d. 95%

Last Answer : ANSWER a. 57.5%

Absolute alcohol is 1. Pure ethanol 2. 95% alcohol and 5% water 3. 200% proof 4. Rectified spirit The correct answers are: (a) 1 and 2 (b) 1 and 4 (c) 1 and 3 (d) 2 and 3

Description : Absolute alcohol is 1. Pure ethanol 2. 95% alcohol and 5% water 3. 200% proof 4. Rectified spirit The correct answers are: (a) 1 and 2 (b) 1 and 4 (c) 1 and 3 (d) 2 and 3

Last Answer : Ans:(c)

Protective gas used in the annealing furnace for steel coil comprises of (A) 95% N2 + 5% H2 (B) 5% H2 + 9% N2 (C) 100% CO (D) 100% H2

Description : Protective gas used in the annealing furnace for steel coil comprises of (A) 95% N2 + 5% H2 (B) 5% H2 + 9% N2 (C) 100% CO (D) 100% H2

Last Answer : (A) 95% N2 + 5% H2

High purity nitrogen is used in (A) Making protective gas (95% N2 + 5% H2 ) for annealing of cold rolled steel strip coils (B) Fire fighting purposes (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : High purity nitrogen is used in (A) Making protective gas (95% N2 + 5% H2 ) for annealing of cold rolled steel strip coils (B) Fire fighting purposes (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Given IQ scores are approximately normally distributed with a mean of 100 and standard deviation of 15, the proportion of people with IQs above 130 is: a. 95% b. 68% c. 5% d. 2.5%

Description : Given IQ scores are approximately normally distributed with a mean of 100 and standard deviation of 15, the proportion of people with IQs above 130 is: a. 95% b. 68% c. 5% d. 2.5%

Last Answer : d. 2.5%

Does ice melt faster in humid conditions (high relative humidity), or low?

Description : Does ice melt faster in humid conditions (high relative humidity), or low?

Last Answer : Humid air is denser then dry air. The more air molecules that there are surrounding the ice, the more heat exchange will take place over dry air (given a constant air and surface temperature and over a ... air will draw heat from the ice and cause it to melt more quickly than less dense dry air.

In case of thin film of non-uniform thickness, when illuminated with white light, the film appears colored. This is due to change of what factor? (a) Conditions for path difference at different points of film (b) Change in optical path difference at different points of film (c) Thickness of film is different at different points of film (d) All of above

Description : In case of thin film of non-uniform thickness, when illuminated with white light, the film appears colored. This is due to change of what factor? (a) Conditions for path difference at different points of ... of film (c) Thickness of film is different at different points of film (d) All of above

Last Answer : (d) All of above

If the temperature of a place increases suddenly, the relative humidity – (1) Increases (2) Decreases (3) Remains constant (4) Fluctuates

Description : If the temperature of a place increases suddenly, the relative humidity – (1) Increases (2) Decreases (3) Remains constant (4) Fluctuates

Last Answer : (2) Decreases Explanation: Relative humidity is the ratio of the partial pressure of water vapor in an airwater mixture to the saturated vapor pressure of water at a prescribed ... of the system decreases because the saturated vapor pressure of water increases with increasing temperature.

If the temperature of a place increases suddenly, the relative humidity (1) Increases (2) Decreases (3) Remains constant (4) Fluctuates

Description : If the temperature of a place increases suddenly, the relative humidity (1) Increases (2) Decreases (3) Remains constant (4) Fluctuates

Last Answer : Decreases

Pick up the correct statement from the following: A. In treated sewage, 4 ppm of D.O. is essential B. Only very fresh sewage contains some dissolved oxygen C. The solubility of oxygen in sewage is 95% that is in distilled water D. All the above

Description : Pick up the correct statement from the following: A. In treated sewage, 4 ppm of D.O. is essential B. Only very fresh sewage contains some dissolved oxygen C. The solubility of oxygen in sewage is 95% that is in distilled water D. All the above

Last Answer : ANS: D

What six types of environmental damage can occur to tapes in storage when the ideal temperature and humidity ranges are exceeded?

Description : What six types of environmental damage can occur to tapes in storage when the ideal temperature and humidity ranges are exceeded?

Last Answer : Tape deformation, oxide shedding, head-to-tape sticking, layer to-layer sticking, dirt build-up, and excessive tape and head wear.

Environmental damage to magnetic tape can occur when the tape is stored in an area that exceeds what ideal temperature and humidity ranges?

Description : Environmental damage to magnetic tape can occur when the tape is stored in an area that exceeds what ideal temperature and humidity ranges?

Last Answer : Ideally, use and store tape at 60 to 80º F and at 40 to 60% relative humidity.

Sling psychrometer is used to measure A. only dry bulb temperature B. only wet bulb temperature C. dry and wet bulb temperature D. relative humidity

Description : Sling psychrometer is used to measure A. only dry bulb temperature B. only wet bulb temperature C. dry and wet bulb temperature D. relative humidity

Last Answer : ANSWER : C

Which of the following processes is followed by unsaturated air (with dry bulb temperature 12°C and relative humidity 47%) passing through water spray washer (temperature of water being constant at 40°C? (A) Humidification only (B) Heating only (C) Both heating and humidification (D) Evaporative cooling

Description : Which of the following processes is followed by unsaturated air (with dry bulb temperature 12°C and relative humidity 47%) passing through water spray washer (temperature of water being constant at 40°C ... (B) Heating only (C) Both heating and humidification (D) Evaporative cooling

Last Answer : (C) Both heating and humidification

A sling psychrometer is used to measure : a) only dry bulb temperature b) only wet bulb temperature c) both a & b d) relative humidity

Description : A sling psychrometer is used to measure : a) only dry bulb temperature b) only wet bulb temperature c) both a & b d) relative humidity

Last Answer : c) both a & b

Process conditions in fermentator used for production of penicillin is (A) 25°C, 2 atm (B) 50°C, l0 atm (C) 30°C, 200 mm Hg (absolute) (D) 90°C, 45 atm

Description : Process conditions in fermentator used for production of penicillin is (A) 25°C, 2 atm (B) 50°C, l0 atm (C) 30°C, 200 mm Hg (absolute) (D) 90°C, 45 atm

Last Answer : (A) 25°C, 2 atm

The Manufacturer of aeration devices reports the oxygen transfer rate of the device obtained through laboratory tests carried under standard conditions. Such standard condition are : (a) Wastewater at zero DO, 25°C and 760 mm Hg (b) Tapwater at zero DO, 0°C and 700 mm Hg (c) Tapwater at zero DO, 20°C and 760 mm Hg (d) Wastewater at zero DO, 0°C and 700 mm Hg

Description : The Manufacturer of aeration devices reports the oxygen transfer rate of the device obtained through laboratory tests carried under standard conditions. Such standard condition are : (a) Wastewater at zero DO, 25°C and 760 mm ... DO, 20°C and 760 mm Hg (d) Wastewater at zero DO, 0°C and 700 mm Hg

Last Answer : (c) Tapwater at zero DO, 20°C and 760 mm Hg

Wet-bulb temperature is: a. The temperature indicated by a thermometer whose bulb covered by a water-wetted wick and exposed to a rapidly moving stream of air b. The same as the dry-bulb temperature if the relative humidity is less than 100% c. The dew point temperature d. Always less than the dry-bulb temperature e. Not required to find the relative humidity

Description : Wet-bulb temperature is: a. The temperature indicated by a thermometer whose bulb covered by a water-wetted wick and exposed to a rapidly moving stream of air b. The same as the dry-bulb ... point temperature d. Always less than the dry-bulb temperature e. Not required to find the relative humidity

Last Answer : Answer: A

Dry-bulb temperature is: a. The absolute temperature corresponding to the atmospheric pressure b. The same as the wet-bulb temperature if the relative humidity is less than 100% c. Not required to find the relative humidity d. The temperature of the air measured with an ordinary thermometer e. The dew point temperature

Description : Dry-bulb temperature is: a. The absolute temperature corresponding to the atmospheric pressure b. The same as the wet-bulb temperature if the relative humidity is less than 100% c. Not required ... d. The temperature of the air measured with an ordinary thermometer e. The dew point temperature

Last Answer : Answer: D

The term "relative humidity" applies to a) the percentage of moisture in the air as compared to the amount of moisture the air can hold at a specific temperature b) the weight of the moisture in the air c) the dryness fraction of the air d) the amount of moisture in the air e) the amount of humidity in the air

Description : The term "relative humidity" applies to a) the percentage of moisture in the air as compared to the amount of moisture the air can hold at a specific temperature b) the weight of the moisture in the air c) ... of the air d) the amount of moisture in the air e) the amount of humidity in the air

Last Answer : ANSWER : A

Relative humidity is a) the ratio of water vapour in the air compared to the total amount water vapour the air could contain at a given temperature b) equal to the dry bulb temperature divided by the wet bulb temperature c) equal to the wet bulb temperature divided by the dry bulb temperature d) the ratio of the mass of water vapour divided by the mass of dry air e) the ratio of the mass of water vapour divided by the mass of wet air

Description : Relative humidity is a) the ratio of water vapour in the air compared to the total amount water vapour the air could contain at a given temperature b) equal to the dry bulb temperature divided by the wet bulb ... of dry air e) the ratio of the mass of water vapour divided by the mass of wet air

Last Answer : ANSWER : A

Other things being suitable, what level of temperature is considered ideal for optimum growth of banana crop ? (A) 36°C (B) 18°C (C) 30°C (D) 12°C (E) 27°C

Description : Other things being suitable, what level of temperature is considered ideal for optimum growth of banana crop ? (A) 36°C (B) 18°C (C) 30°C (D) 12°C (E) 27°C

Last Answer : (C) 30°C

is the Objective of the energy management from the following :- a) To give each product a label b) To evolve minimum energy consumption c) To minimize environmental effects d) To achieve optimum energy procurement

Description : is the Objective of the energy management from the following :- a) To give each product a label b) To evolve minimum energy consumption c) To minimize environmental effects d) To achieve optimum energy procurement

Last Answer :  To evolve minimum energy consumption 

The objective of energy management is ____ A. To achieve and maintain optimum energy procurement and utilization throughout the organization B. To minimize the energy cost without affecting production and quality C. To minimize the environmental effects D. All of the above

Description : The objective of energy management is ____ A. To achieve and maintain optimum energy procurement and utilization throughout the organization B. To minimize the energy cost without affecting production and quality C. To minimize the environmental effects D. All of the above

Last Answer : All of the above

Which one of the following condition is not essential to grow maize ? a) high temperature b)humidity c) very low temperature d)rainfall

Description : Which one of the following condition is not essential to grow maize ? a) high temperature b)humidity c) very low temperature d)rainfall

Last Answer : c) very low temperature

The temperature of the top of a frozen lake is – 15°C. What is the temperature of the water in the lake in contact with the ice layer? (a) 0°C (b) 4°C (c) –15°C (d) –7.5°C

Description : The temperature of the top of a frozen lake is – 15°C. What is the temperature of the water in the lake in contact with the ice layer? (a) 0°C (b) 4°C (c) –15°C (d) –7.5°C

Last Answer : Ans:(a)

Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm

Description : Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm

Last Answer : (A) 5°C and 1 kgf/cm