Draw torque characteristics of shaded pole IM. State its any two applications.

Draw torque characteristics of shaded pole IM. State its any two applications.
by

1 Answer

Answer :

Torque Characteristics of Shaded Pole IM:

image


Applications of Shaded Pole Induction Motor: 1) Small Fans 2) Recording Instruments 3) Record Players 4) Gramophones 5) Toy motors 6) Photocopying machines 7) Small clocks 8) Hair dryers

by

Related questions

A single-phase induction motor having a relatively high starting torque, is the ___________. A. shaded pole motor B. wound-rotor motor C. capacitor-start motor D. resistance-start motor

Description : A single-phase induction motor having a relatively high starting torque, is the ___________. A. shaded pole motor B. wound-rotor motor C. capacitor-start motor D. resistance-start motor

Last Answer : Answer: C

The torque produced in induction type relay (shaded pole structure) is?

Last Answer : The torque produced in induction type relay (shaded pole structure) is inversely proportional to the square of the current.

State two applications of 1) Shaded pole motor 2) Universal motor

Description : State two applications of 1) Shaded pole motor 2) Universal motor

Last Answer : (i)Applications of Shaded pole motor: 1. Small fans 2. Toy motors 3. Hair dryers 4. Ventilators 5. Electric clocks 6. Record players 7. Motorized valves 8. Gramophones 9. Photocopying ... 5. Portable Drilling Machines 6. Electric Shavers 7. Mechanical computing Machines 8. Machine Tools etc.

Draw and explain working of universal motor. Give two applications of universal motor.

Description : Draw and explain working of universal motor. Give two applications of universal motor.

Last Answer : Figure of Universal motor:   Operation of universal motor on A.C. and D.C. supply:   *A universal motor works on either DC or single phase AC supply. When the universal motor is ... , regardless of AC or DC supply, universal motor works on the same principle that DC series motor works.  

Explain speed control method of 3 phase induction motor by the following methods: (1) Pole changing (2) Rotor resistance control (3) Stator voltage

Description : Explain speed control method of 3 phase induction motor by the following methods: (1) Pole changing (2) Rotor resistance control (3) Stator voltage

Last Answer : 1) Pole Changing Method:  Synchronous speed is given by, From the above equation of synchronous speed, it can be seen that synchronous speed (and hence, running speed) can ... in voltage and consequently the speed decreases and vice versa. Ultimately speed depends on the supply voltage.

State any four applications of 3 phase induction motor.

Description : State any four applications of 3 phase induction motor.

Last Answer : Applications of 3 Phase Induction Motor: 1) Lathes 2) Flour mills 3) Grinders 4) Centrifugal pumps 5) Drilling machines 6) Laundry washing machines 7) Wood working machines 8) Blowers 9 ... industries 38) For generators 39) Driving line shafts 40) For practical purposes in educational institutes.

Draw and explain star delta starter for 3 phase induction motor

Description : Draw and explain star delta starter for 3 phase induction motor

Last Answer : Star Delta Starter for 3 Phase Induction Motor:  Diagram Explanation: The stator winding of the motor which is designed for delta operation is connected in star during starting ... which connects stator windings in delta connection. Now each stator phase gets full line voltage VL.

In the illustrated device, the part labeled '1A' _________. EL-0001 A. are start and run windings for a single phase shaded pole induction motor B. is the stator for a polyphase induction motor C. is the armature for a squirrel cage rotor motor D. are direct current shunt field windings for a universal motor

Description : In the illustrated device, the part labeled '1A' _________. EL-0001 A. are start and run windings for a single phase shaded pole induction motor B. is the stator for a polyphase induction ... armature for a squirrel cage rotor motor D. are direct current shunt field windings for a universal motor

Last Answer : Answer: B

Which type of AC single-phase motor will also operate on direct current? A. Split-phase B. Series-wound C. Shaded-pole D. Repulsion-start

Description : Which type of AC single-phase motor will also operate on direct current? A. Split-phase B. Series-wound C. Shaded-pole D. Repulsion-start

Last Answer : Answer: B

A shaded-pole motor is a ____________. A. synchronous motor B. three-phase induction motor C. compound-wound motor D. single-phase induction motor

Description : A shaded-pole motor is a ____________. A. synchronous motor B. three-phase induction motor C. compound-wound motor D. single-phase induction motor

Last Answer : Answer: D

Why shaded-pole single phase induction motor does not need any special starting technique like capacitors and auxiliary winding etc.

Description : Why shaded-pole single phase induction motor does not need any special starting technique like capacitors and auxiliary winding etc.

Last Answer : Because it is inherently self started motor. The construction of the poles is such that they give a sweep to the magnetic flux and motor starts rotating.

What is size of shaded-pole motor?

Description : What is size of shaded-pole motor?

Last Answer : These are usually built in small fractional H.P, not exceed 1/4 H.P.

what is the application of shaded pole induction motor?

Description : what is the application of shaded pole induction motor?

Last Answer : Because of its small starting torque, it is generally used for small fans, toys, instruments, hair driers, tape recorder, advertising display, ventilators, electric clock etc.

What is the principle of operation of shaded-pole induction motor?

Description : What is the principle of operation of shaded-pole induction motor?

Last Answer : A shaded-pole motor is basically a small single-phase squirrel cage motor in which the starting winding is composed of short-circuited copper ring (called shading coil) surrounding one-third of each pole ... rotating magnetic field. As a result, the rotor is set in motion due to induction principle.

In which direction does a shaded pole motor run?

Description : In which direction does a shaded pole motor run?

Last Answer : The rotor starts rotation in the direction from unshaded part to the shaded part.

what do you mean by shaded pole motor?

Description : what do you mean by shaded pole motor?

Last Answer : These motor have projected pole with 1/3 pole part rapped with a copper strip. This portion of the pole is called shaped part of the pole because of this a revolving field is set up in the Stator and torque is developed.

Why are shaded-pole motors used to drive only very small devices?

Description : Why are shaded-pole motors used to drive only very small devices?

Last Answer : They have very weak starting torques.

The direction of rotation of hysteresis motor is reversed by (A) Shift shaded pole with respect to main pole (B) Reversing supply lead (C) Either A or B (D) Neither A nor B

Description : The direction of rotation of hysteresis motor is reversed by (A) Shift shaded pole with respect to main pole (B) Reversing supply lead (C) Either A or B (D) Neither A nor B

Last Answer : Ans: A This motor used single phase, 50Hz supply and stator has two windings. These are connected continuously from starting to running.

With a neat sketch give the working of shaded pole induction motor.

Description : With a neat sketch give the working of shaded pole induction motor.

Last Answer : Explanation: It has squirrel cage rotor and salient pole stator. The stator poles are shaded partially by short circuited conductor band to create the phase difference between the fluxes emerging from shaded ... rotating magnetic field in the air-gap and torque is exerted on the squirrel cage rotor.

A shaded pole induction motor does not have the advantage of

Description : A shaded pole induction motor does not have the advantage of   (a) Rugged construction (b) Low initial as well as maintenance cost (c) High starting torque (d) Comparatively small starting current 

Last Answer : c. high starting torque

Locked rotor current of a shaded pole motor is?

Last Answer : Locked rotor current of a shaded pole motor is slightly more than full load current.

The shaded pole motor is used for?

Last Answer : The shaded pole motor is used for low starting torque.

In case of a shaded pole motor the direction of rotation of the motor is?

Last Answer : In case of a shaded pole motor the direction of rotation of the motor is from main pole to shaded pole.

A shaded pole motor can be used for?

Last Answer : A shaded pole motor can be used for toys, hair dryers, circulators etc.

The range of efficiency for shaded pole motors is?

Last Answer : The range of efficiency for shaded pole motors is 5% to 35%.

In a shaded pole single-phase motor, the revolving field is produced by the use of?

Last Answer : In a shaded pole single-phase motor, the revolving field is produced by the use of shading coils.

In a shaded pole motor, the shading coil usually consist of?

Last Answer : In a shaded pole motor, the shading coil usually consist of a single turn of heavy copper wire which is short-circuited and carries only induced current.

Draw the characteristics of tunnel diode, showing operating regions. State two applications of tunnel diode.

Description : Draw the characteristics of tunnel diode, showing operating regions. State two applications of tunnel diode.

Last Answer : Applications: One of the important application of a tunnel diode is in high speed computers where the switching times in the order of nanoseconds or picoseconds are desirable. A tunnel diode can be ... In digital networks. 2. As a high speed switch. 3. As a high frequency oscillator.

Draw the characteristics of tunnel diode and write two applications of it.

Description : Draw the characteristics of tunnel diode and write two applications of it.

Last Answer :  Characteristics:  Applications: 1. In the digital networks 2. As a high speed switch 3. As a high frequency oscillator 4. High speed computers

State the function of following parts of slip ring induction motor: (i) Slip ring (ii) Fan (iii) Brushes (iv) Frame

Description : State the function of following parts of slip ring induction motor: (i) Slip ring (ii) Fan (iii) Brushes (iv) Frame

Last Answer : Sr. No. Name of part Function 1 Slip ring 1) The rotor winding terminals are permanently connected to the slip rings. 2) Connects external resistance to rotor circuit through ... It provides mechanical support to the entire internal parts of motor. 2) Protects the inner parts.

The introduction of interpoles in between the main pole improves the performance of d.c. machines, because (A) The interpole produces additional flux to augment the developed torque. (B) The flux waveform is improved with reduction in harmonics. (C) The inequality of air flux on the top and bottom halves of armature is removed. (D) A counter e.m.f. is induced in the coil undergoing commutation.

Description : The introduction of interpoles in between the main pole improves the performance of d.c. machines, because (A) The interpole produces additional flux to augment the developed torque. (B) The flux waveform is ... armature is removed. (D) A counter e.m.f. is induced in the coil undergoing commutation.

Last Answer : Ans: D Counter e.m.f is produced, it neutralizes the reactive emf.

A 400 V, 15 kW, 4-pole, 50 Hz, Y-connected induction motor has full load slip of 4%. The output torque of the

Description : A 400 V, 15 kW, 4-pole, 50 Hz, Y-connected induction motor has full load slip of 4%. The output torque of the machine at full load is  (A) 1.66 Nm (B) 95.50 Nm (C) 99.47 Nm (D) 624.73 Nm

Last Answer : A 400 V, 15 kW, 4-pole, 50 Hz, Y-connected induction motor has full load slip of 4%. The output torque of the machine at full load is 99.47 Nm

The power factor angle and torque angle of a salient pole synchronous generator drawing a current of 1.0 pu

Description : The power factor angle and torque angle of a salient pole synchronous generator drawing a current of 1.0 pu from a lagging load are 45o and 15o, respectively. The direct axis and quadrature axis currents, respectively, are (A) 0.5 pu ... pu, 0.5 pu (C) 0.707 pu, 0.707 pu (D) 0.5 pu, 0.5 pu

Last Answer : The power factor angle and torque angle of a salient pole synchronous generator drawing a current of 1.0 pu from a lagging load are 45o and 15o, respectively. The direct axis and quadrature axis currents, respectively, are 0.866 pu, 0.5 pu

Write two application of the following motor (i) AC servo motor (ii) Stepper motor

Description : Write two application of the following motor (i) AC servo motor (ii) Stepper motor

Last Answer : (i)Applications of AC Servo Motor: 1. Computers 2. Robotics and toys 3. CD/DVD players 4. Textile industries 5. Instrument servos 6. Tracking and guidance system 7. Self- ... Laser cutters 20.Extruders 21.Engravers 22.Analytical and Medical instruments 23.Embroidery Machines 24.Packeging Machines

Explain construction and working of D.C. servomotor.

Description : Explain construction and working of D.C. servomotor.

Last Answer : Construction and Working of D.C. Servo Motor: The D.C. motor that is used in servo-mechanism is called a D.C. servo motor. There are three main types of D.C. servo motor ... magnet materials used in PM motors eliminates the need for interpoles due to their excellent commutation characteristics. 

Advantages of Short Pitch Coils for an Alternator

Description : Advantages of Short Pitch Coils for an Alternator

Last Answer : Advantages of Short Pitch Coils for an Alternator: (1) It gives better sinusoidal waveform by reducing the harmonic components. (2) It saves copper as length required for the connections is ... are illuminated, hysteresis & eddy current losses will be reduced and this increases the efficiency.

Derive the relationship between Synchronous speed (Ns) and frequency (f) of alternator.

Description : Derive the relationship between Synchronous speed (Ns) and frequency (f) of alternator.

Last Answer : Derivation of Relationship Between Synchronous speed (Ns) and Frequency (f) of Alternator: Let, Ns = rotor speed in rpm (synchronous speed) P = number of rotor poles f = frequency of emf in Hz ... complete cycle of emf is generated in the conductor as pair of poles passes it. Hence : 

Explain DOL starter used for 3 phase induction motor.

Description : Explain DOL starter used for 3 phase induction motor.

Last Answer : DOL Starter Used for 3 Phase Induction Motor: The direct online starter consist of overload relay (OLC), contactor, start-push button S1 (normally open), stop-push button S2 (normally ... The overload coil (OLC) protects the motor against overload and short circuit by opening the contact D.

Compare squirrel cage induction motor and slip ring induction motor any four points.

Description : Compare squirrel cage induction motor and slip ring induction motor any four points.

Last Answer : Comparison Between Squirrel Cage Induction Motor and Slip Ring Induction Motor: Sr. No. Squirrel Cage Induction Motor Slip Ring Induction Motor 1 Rotor is in the form of short circuited bars ... drive e.g. Lathe machine. Used where high starting torque is required e.g. Lifts.

Why INDIA has 50hz and USA has 60hz frequency cycle of current?

Last Answer : Because India uses 220-230volt  In USA there they uses 110volt

Explain the construction of three phase induction motor with neat diagram.

Description : Explain the construction of three phase induction motor with neat diagram.

Last Answer : Construction of Three-phase Induction Motor: There are two main parts of the three phase induction motor:  i) Stator which is the stationary part  ii) Rotor which is the rotating ... slip-rings. In this rotor also the slots are not exactly parallel to the shaft but slightly skewed.

Draw the diagram of PMMC instrument and state the deflection torque equation

Description : Draw the diagram of PMMC instrument and state the deflection torque equation

Last Answer : Equation Ʈ= B*A*I*N Where r= torque Newton. Meter B = flux density in the air gap. Wb/m2 A = effective coil area (m) N= number of turns of wire of the coil

An across-the-line starter is typically used for which of the following applications? A. Reduced-current starting of large motors B. Low torque starting of small motors C. Low resistance starting of DC motors D. Full-voltage starting of motors

Description : An across-the-line starter is typically used for which of the following applications? A. Reduced-current starting of large motors B. Low torque starting of small motors C. Low resistance starting of DC motors D. Full-voltage starting of motors

Last Answer : Answer: D

Why do we use capacitor-start induction motors in applications requiring high starting torque in preference to repulsion induction motors?

Description : Why do we use capacitor-start induction motors in applications requiring high starting torque in preference to repulsion induction motors?

Last Answer : Capacitors are easily available, cheaper and reliable. Repulsion-induction motors posses a special commutator and brushes that require maintenance. Most manufacturers have stopped making them.

Why do we use capacitor-start induction motors in applications requiring high starting torque in preference to repulsion induction motors?

Description : Why do we use capacitor-start induction motors in applications requiring high starting torque in preference to repulsion induction motors?

Last Answer : Ans : Capacitors are easily available, cheaper and reliable. Repulsion-induction motors posses a special commutator and brushes that require maintenance. Most manufacturers have stopped making them.

Draw and explain the measurement of torque using Torque Cell

Description : Draw and explain the measurement of torque using Torque Cell

Last Answer : Figure a shows the construction of load cell used to measure torque using strain gauges connected to the rotating shaft.. Figure b represents the bridge arrangement to measure torque. .The ... diagonal axis. The Wheatstone bridge output is proportional to torsion and hence the torque. . 

Observe the given map. Which one of the following statement is NOT true about the shaded state indicated on the map? (1) Society predominantly follows right of female ultimogeniture (2) The state is an example of areas with karst topography INDIA North eastern region (3) The state is a major producer of potatoes in India (4) Some parts of the state receive extremely high rainfal

Description : Observe the given map. Which one of the following statement is NOT true about the shaded state indicated on the map? (1) Society predominantly follows right of female ultimogeniture (2) The state is ... a major producer of potatoes in India (4) Some parts of the state receive extremely high rainfal

Last Answer : (3) The state is a major producer of potatoes in India

The speed-torque characteristics of a DC series motor are approximately similar to those of the _________motor. (A) universal (B) synchronous (C) DC shunt (D) two-phase

Description : The speed-torque characteristics of a DC series motor are approximately similar to those of the _________motor. (A) universal (B) synchronous (C) DC shunt (D) two-phase

Last Answer : Ans: A Universal motor has same characteristics as DC series motor and also known as an a.c series motor.

Draw the ray diagram in each case to show the position and nature of the image formed when the object is placed: (i) at the centre of curvature of a concave mirror (ii) between the pole P and focus F of a concave mirror (iii) in front of a convex mirror (iv) at 2F of a convex lens (v) in front of a concave lens -Physics

Description : Draw the ray diagram in each case to show the position and nature of the image formed when the object is placed: (i) at the centre of curvature of a concave mirror (ii) between the pole P and focus F of ... front of a convex mirror (iv) at 2F of a convex lens (v) in front of a concave lens -Physics

Last Answer : Answer. Nature of image: Real, inverted and same size image is formed at the centre of curvature. Nature of image: Virtual, enlarged and erect image is formed behind the mirror. Nature of image: Virtual ... : Virtual, erect and diminished image is formed between O and F on the same side of object.

Which of the following operating characteristics for DC motors is considered to give high starting torque? A. series B. shunt C. cumulative-compound D. differential-compound

Description : Which of the following operating characteristics for DC motors is considered to give high starting torque? A. series B. shunt C. cumulative-compound D. differential-compound

Last Answer : Answer: A