Shatter index of the coke is a measure of its (A) Strength (B) Bulk density (C) Reactivity (D) None of these

Shatter index of the coke is a measure of its
(A) Strength
(B) Bulk density
(C) Reactivity
(D) None of these
by

1 Answer

Answer :

(A) Strength
by

Related questions

"Micum Index" of a coke is a measure of its (A) Reactivity (B) Porosity (C) Bulk density (D) Hardness & strength

Description : "Micum Index" of a coke is a measure of its (A) Reactivity (B) Porosity (C) Bulk density (D) Hardness & strength

Last Answer : (D) Hardness & strength

Coke having higher porosity has (A) Lower bulk density (B) Lower strength (C) Higher reactivity (D) All (A), (B) and (C)

Description : Coke having higher porosity has (A) Lower bulk density (B) Lower strength (C) Higher reactivity (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) Cokes of high reactivity are obtained from weakly coking coals (B) Cokes of high reactivity are obtained from strongly coking coals (C) Reactivity of coke is inversely proportional to its absolute density (D) Abrasion index of the coke is a measure of its hardness

Description : Pick out the wrong statement. (A) Cokes of high reactivity are obtained from weakly coking coals (B) Cokes of high reactivity are obtained from strongly coking coals (C) Reactivity of coke is inversely proportional to its absolute density (D) Abrasion index of the coke is a measure of its hardness

Last Answer : (B) Cokes of high reactivity are obtained from strongly coking coals

Critical Air Blast (CAB) value of coke is a direct measure of its (A) Reactivity (B) Hardness (C) Strength (D) None of these

Description : Critical Air Blast (CAB) value of coke is a direct measure of its (A) Reactivity (B) Hardness (C) Strength (D) None of these

Last Answer : (A) Reactivity

Shatter index of metallurgical coke on 2 inches and 0.5 inch screen should be respectively around __________ percent. (A) 80 and 97 (B) 95 and 100 (C) 40 and 70 (D) 25 and 97

Description : Shatter index of metallurgical coke on 2 inches and 0.5 inch screen should be respectively around __________ percent. (A) 80 and 97 (B) 95 and 100 (C) 40 and 70 (D) 25 and 97

Last Answer : (A) 80 and 97

Highly reactive coke have lower (A) Porosity (B) Coke reactivity index (CRI) (C) Critical air blast (CAB) value (D) Both (B) and (C)

Description : Highly reactive coke have lower (A) Porosity (B) Coke reactivity index (CRI) (C) Critical air blast (CAB) value (D) Both (B) and (C)

Last Answer : (C) Critical air blast (CAB) value

Caking index of a coal is a measure of its (A) Abradability (B) Reactivity (C) Agglutinating (binding) properties (D) Porosity

Description : Caking index of a coal is a measure of its (A) Abradability (B) Reactivity (C) Agglutinating (binding) properties (D) Porosity

Last Answer : (C) Agglutinating (binding) properties

Grinding characteristic of a material is given by its (A) HGI (B) Angle of repose (C) Shatter index (D) Abrasion index

Description : Grinding characteristic of a material is given by its (A) HGI (B) Angle of repose (C) Shatter index (D) Abrasion index

Last Answer : (A) HGI

Mott and Wheeler test is conducted on coke to find its (A) Reactivity with O2 (B) Abradability (C) Phosphorus content (D) Volatile matter content

Description : Mott and Wheeler test is conducted on coke to find its (A) Reactivity with O2 (B) Abradability (C) Phosphorus content (D) Volatile matter content

Last Answer : (A) Reactivity with O2

M10 index of coke indicates its (A) Compressive strength (B) Hardness (C) Abrasion resistance (D) Impact strength

Description : M10 index of coke indicates its (A) Compressive strength (B) Hardness (C) Abrasion resistance (D) Impact strength

Last Answer : Option C

M10 index of coke indicates its (A) Compressive strength (B) Hardness (C) Abrasion resistance (D) Impact strength Answer: Option C

Description : M10 index of coke indicates its (A) Compressive strength (B) Hardness (C) Abrasion resistance (D) Impact strength Answer: Option C

Last Answer : Option C

Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Description : Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Last Answer : (D) Converts its plasticity into elasticity

Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Description : Vulcanisation of rubber (A) Decreases its tensile strength (B) Increases its ozone & oxygen reactivity (C) Increases its oil & solvent resistance (D) Converts its plasticity into elasticity

Last Answer : (D) Converts its plasticity into elasticity

H2 is a better coolant than CO2 , due to it’s relatively (A) Lower density (B) Higher specific heat (C) Non-reactivity to uranium (D) Lower neutron capture cross-section

Description : H2 is a better coolant than CO2 , due to it’s relatively (A) Lower density (B) Higher specific heat (C) Non-reactivity to uranium (D) Lower neutron capture cross-section

Last Answer : (B) Higher specific heat

“Composite sleeper index” is employed to determine a) sleeper density requirement b) number of fixtures required for a particular type of sleeper c) durability of sleeper d) mechanical strength of wooden sleepers and thereby gives its suitability as to be used as li sleepers.*

Description : “Composite sleeper index” is employed to determine a) sleeper density requirement b) number of fixtures required for a particular type of sleeper c) durability of sleeper d) mechanical strength of wooden sleepers and thereby gives its suitability as to be used as li sleepers.*

Last Answer : d) mechanical strength of wooden sleepers and thereby gives its suitability as to be used as li sleepers.*

Refractory metals are known for which of the following properties: w) lack of chemical reactivity x) low density y) high melting point z) high thermal conductivity

Description : Refractory metals are known for which of the following properties: w) lack of chemical reactivity x) low density y) high melting point z) high thermal conductivity

Last Answer : ANSWER: Y -- HIGH MELTING POINT

What will shatter your patience?

Description : What will shatter your patience?

Last Answer : Not so much anymore.

What causes an oven door to shatter?

Description : What causes an oven door to shatter?

Last Answer : Some theories - - the food may have been trying to break out, you should securely cover whatever you put in it from now on - your oven has a thing against carbs, try fine meat products - it's ... Is your oven the same? Are they both shattering or just one? That may help you locate the cause.

What category of elements would you choose to make container that wouldn't shatter if dropped during a test?

Description : What category of elements would you choose to make container that wouldn't shatter if dropped during a test?

Last Answer : Need answer

Can sliding glass doors be made shatter-proof?

Description : Can sliding glass doors be made shatter-proof?

Last Answer : Yes and no. "Shatter proof" sliding glass doors are available at Home Depot. However, this is really a level of shatter resistance if you read the fine print. There are storm proofing systems that can be added to sliding glass doors to make them shatter resistant for winds up to 175 mph.

Are there any clear vases that are shatter resistant?

Description : Are there any clear vases that are shatter resistant?

Last Answer : While plastic and Lexan vases do exist, they tend to be more easily tipped over because of their lighter weight. If you choose an acrylic vase, make sure it's not top-heavy, and take great care not to scratch the finish while washing it.

Do they make shatter proof glass kitchen tables tops?

Description : Do they make shatter proof glass kitchen tables tops?

Last Answer : Not that I know of... there are plenty of shatter-proof cups and utensils out there, which are great for kids if you want something that looks a little better than plastic... however I've ... that is relatively heavy with sturdy legs, making it very difficult to tip over and unlikely to shatter.

Ploughs used to break through shatter compacted or imperable soil layers. a) Disc plough b) Mold board plough c) Chisel plough d) Country plough

Description : Ploughs used to break through shatter compacted or imperable soil layers. a) Disc plough b) Mold board plough c) Chisel plough d) Country plough

Last Answer : Chisel plough

plough is used to break through and shatter compacted or otherwise impermeable soil layers. A. Disc plough C. Chisel plough B. Sub-soil plough D. None of the above

Description : plough is used to break through and shatter compacted or otherwise impermeable soil layers. A. Disc plough C. Chisel plough B. Sub-soil plough D. None of the above

Last Answer : Chisel plough

Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct process of by-product recovery (C) A high swelling index number of coking coal indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Description : Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct ... indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Last Answer : (C) A high swelling index number of coking coal indicates poor caking properties of coal

Abrasion index of blast furnace coke should be around __________ percent. (A) 20 (B) 35 (C) 55 (D) 80

Description : Abrasion index of blast furnace coke should be around __________ percent. (A) 20 (B) 35 (C) 55 (D) 80

Last Answer : (D) 80

Desirable "Micum Index" values of metallurgical coke are (A) M40 > 78% and M10 < 10% (B) M40 > 4% and M10 < 80% (C) M40 > 10% and M10 < 78% (D) M40 > 98% and M10 < 2%

Description : Desirable "Micum Index" values of metallurgical coke are (A) M40 > 78% and M10 < 10% (B) M40 > 4% and M10 < 80% (C) M40 > 10% and M10 < 78% (D) M40 > 98% and M10 < 2%

Last Answer : (A) M40 > 78% and M10 < 10%

Caking index of the coal blend used for the manufacture of metallurgical coke should be around (A) 5 (B) 21 (C) 40 (D) 48

Description : Caking index of the coal blend used for the manufacture of metallurgical coke should be around (A) 5 (B) 21 (C) 40 (D) 48

Last Answer : (B) 21

Caking index of coal blend used for blast furnace coke making is about (A) 8 (B) 12 (C) 22 (D) 36

Description : Caking index of coal blend used for blast furnace coke making is about (A) 8 (B) 12 (C) 22 (D) 36

Last Answer : (C) 22

Pick up the correct statement from the following: (A) Permeability is a measure of conducting the magnetic lines of force in the material (B) Permeability is a measure of the extent to which magnetic lines of force can penetrate a medium (C) Permeability is expressed as the ratio of the magnetic flux density (B) to the field strength of the magnetizing field (D) All of these

Description : Pick up the correct statement from the following: (A) Permeability is a measure of conducting the magnetic lines of force in the material (B) Permeability is a measure of the extent to which magnetic ... magnetic flux density (B) to the field strength of the magnetizing field (D) All of these

Last Answer : Answer: Option D

As the equilibrium moisture content of the coal increases, its (A) Calorific value increases (B) Swelling number decreases (C) Swelling number increases (D) Bulk density decreases

Description : As the equilibrium moisture content of the coal increases, its (A) Calorific value increases (B) Swelling number decreases (C) Swelling number increases (D) Bulk density decreases

Last Answer : (B) Swelling number decreases

With increase in moisture content of coal, its (A) Calorific value increases sometimes (B) Bulk density always decreases (C) Clinkering tendency during combustion increases (D) None of these

Description : With increase in moisture content of coal, its (A) Calorific value increases sometimes (B) Bulk density always decreases (C) Clinkering tendency during combustion increases (D) None of these

Last Answer : (D) None of these

Pulverised coal used in boiler firing need not have (A) Less moisture content (B) High fusion point of its ash (C) High bulk density (D) Lower ash conten

Description : Pulverised coal used in boiler firing need not have (A) Less moisture content (B) High fusion point of its ash (C) High bulk density (D) Lower ash conten

Last Answer : (B) High fusion point of its ash

Fussain (A) Is friable, charcoal like substance(B) Has highest fixed carbon and lowest volatile matter content of all the four banded components of coal (C) Is non-coking, but when blended with highly coking coal, controls its swelling and produces high strength coke on carbonisation (D) All (A), (B) and (C)

Description : Fussain (A) Is friable, charcoal like substance (B) Has highest fixed carbon and lowest volatile matter content of all the four banded components of coal (C) Is non-coking, but when blended with highly coking ... its swelling and produces high strength coke on carbonisation (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

High amount of sulphur and phosphorous in coke causes (A) Decrease in its calorific value (B) Increase in its strength(C) Brittleness of steel made by using it(D) None of these

Description : High amount of sulphur and phosphorous in coke causes (A) Decrease in its calorific value (B) Increase in its strength (C) Brittleness of steel made by using it (D) None of these

Last Answer : (C) Brittleness of steel made by using it

Anthracite can be used for (A) Recarbonising steel (B) Making carbon electrodes(C) Blending with highly coking coal to check its swelling which helps insaving coke even walls from damage and to produce high strength coke(D) All (A), (B) and (C)

Description : Anthracite can be used for (A) Recarbonising steel (B) Making carbon electrodes (C) Blending with highly coking coal to check its swelling which helps in saving coke even walls from damage and to produce high strength coke (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Description : A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Last Answer : (A) Sulphur & phosphorous content

Height of coke oven is limited (say maximum upto 7 metres) mainly by the(A) Problem of uniform heating along its height(B) Structural strength of silica bricks(C) Problem in door cleaning(D) Buckling of ram of pusher car at the time of coke pushing

Description : Height of coke oven is limited (say maximum upto 7 metres) mainly by the (A) Problem of uniform heating along its height (B) Structural strength of silica bricks (C) Problem in door cleaning (D) Buckling of ram of pusher car at the time of coke pushing

Last Answer : (A) Problem of uniform heating along its height

The capacity of a pneumatic conveying system depends upon the (A) Bulk density of materials (B) Pressure of the conveying air (C) Diameter of the conveying line (D) All (A), (B) and (C)

Description : The capacity of a pneumatic conveying system depends upon the (A) Bulk density of materials (B) Pressure of the conveying air (C) Diameter of the conveying line (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ

Description : Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ

Last Answer : (A) 3.6 W.D.V.ρ

Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Description : Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Bulk density of pulverised coal may be about __________ kg/m3 . (A) 100 (B) 500 (C) 1000 (D) 1500

Description : Bulk density of pulverised coal may be about __________ kg/m3 . (A) 100 (B) 500 (C) 1000 (D) 1500

Last Answer : (B) 500

Prilling of urea should be accomplished (in a sprayer) just above the melting point of urea with minimum of retention time, otherwise it will result in (A) Low bulk density product (B) Biuret formation (C) Non-spherical prills (D) Substantially wet non-flowing and sticky product

Description : Prilling of urea should be accomplished (in a sprayer) just above the melting point of urea with minimum of retention time, otherwise it will result in (A) Low bulk density product (B) Biuret formation (C) Non-spherical prills (D) Substantially wet non-flowing and sticky product

Last Answer : (B) Biuret formation

The dimensional formula of bulk modulus of elasticity is same as that of the (A) Pressure (B) Density (C) Force (D) None of these

Description : The dimensional formula of bulk modulus of elasticity is same as that of the (A) Pressure (B) Density (C) Force (D) None of these

Last Answer : Option A

Which of the following is an example of bulk property or general detector in HPLC A. Fluorescence detector B. Refractive index detector C. Electrochemical detector D. UV-Visible detector

Description : Which of the following is an example of bulk property or general detector in HPLC A. Fluorescence detector B. Refractive index detector C. Electrochemical detector D. UV-Visible detector

Last Answer : Refractive index detector

Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Description : Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Last Answer : (B) Takes 2-3 days for coking of coal but requires no external fuel for heating

High ash coals (A) Are soft & friable (poor strength and size stability) (B) Require longer time of carbonisation as ash offers resistance to heat transfer (C) Produce larger quantity of coke oven gas (D) None of these

Description : High ash coals (A) Are soft & friable (poor strength and size stability) (B) Require longer time of carbonisation as ash offers resistance to heat transfer (C) Produce larger quantity of coke oven gas (D) None of these

Last Answer : (A) Are soft & friable (poor strength and size stability)

High ash containing coke (A) Produces more slag when used in the blast(B) Has poor strength and abrasion resistance(C) Is desirable in producer gas manufacture(D) None of these furnace

Description : High ash containing coke (A) Produces more slag when used in the blast furnace (B) Has poor strength and abrasion resistance (C) Is desirable in producer gas manufacture (D) None of these

Last Answer : (A) Produces more slag when used in the blast furnace

During coal carbonisation process, the conversion of semi-coke to coke is accompanied by an increase in the __________ of the mass. (A) Density (B) Porosity (C) Electrical resistivity (D) None of these

Description : During coal carbonisation process, the conversion of semi-coke to coke is accompanied by an increase in the __________ of the mass. (A) Density (B) Porosity (C) Electrical resistivity (D) None of these

Last Answer : (A) Density

What is the significance of bulk density in soil?

Description : What is the significance of bulk density in soil?

Last Answer : Need answer