The capacity of a pneumatic conveying system depends upon the (A) Bulk density of materials (B) Pressure of the conveying air (C) Diameter of the conveying line (D) All (A), (B) and (C)

The capacity of a pneumatic conveying system depends upon the
(A) Bulk density of materials
(B) Pressure of the conveying air
(C) Diameter of the conveying line
(D) All (A), (B) and (C)
by

1 Answer

Answer :

(D) All (A), (B) and (C)
by

Related questions

How can you prevent bridging in a dilute phase pneumatic conveying system?

Description : How can you prevent bridging in a dilute phase pneumatic conveying system?

Last Answer : Manufacturers of these systems recommend bin agitation or blowing air into the top of the feeding bin. These methods can prevent fine particle from bridging near the rotators valve. Two types of particles that are especially prone to bridging include titanium dioxide and calcined- kaolin clay.

What are some common problems associated with dilute phase pneumatic conveying?

Description : What are some commoWhat are some common problems associated with dilute phase pneumatic conveying?

Last Answer : Probably the most common problem encountered in dilute phase pneumatic conveying is the wearing of the rotary valve that serves as an air lock where the product is introduced into the system. If excess ... rotary valve, this can cause bridging of the material the flow can be slowed or stopped.

What are some common problems associated with dense phase pneumatic conveying?

Description : What are some common problems associated with dense phase pneumatic conveying?

Last Answer : Dense phase pneumatic conveying, typically experiences one common problem from system to system: plugging in the line due to a malfunctioning booster valve. Dense phase systems require these booster systems to ... valve. If the check valve becomes stuck, the product is allowed to plug the line.

What is the most common carrier gas used in pneumatic conveying?

Description : What is the most common carrier gas used in pneumatic conveying?

Last Answer : While many applications utilize air as a carrier gas, others are not suited for using air. For example, if the substance being conveyed reactions with moisture in the air or if there is a threat of dust explosions, nitrogen is likely choice.

What types of pneumatic conveying systems are typically used?

Description : What types of pneumatic conveying systems are typically used?

Last Answer : Essentially, there are two types of pneumatic conveying systems. In dilute phase systems, the solids are suspended in the carrier gas and transported to their destination. In dense phase systems, ... is useful if the product degrades easily (works at lower velocities) or is particularly abrasive.

What is pneumatic conveying?

Description : What is pneumatic conveying?

Last Answer : Pneumatic conveying is a method of moving bulk solids from one place to another with the help of a carrier gas. A differential pressure is applied inside a conveying line. The flow always moves from a region of higher to lower pressure.

What is the practical particle size limit for pneumatic conveying?

Description : What is the practical particle size limit for pneumatic conveying?

Last Answer : As a rule, pneumatic conveying will work for particles up to 2 inches in diameter with a typical density. By “typical density”, we mean that a 2 inch particle of a polymer resin can be moved via pneumatic conveying, but a 2 inch lead ball would not.

What is a “saltation velocity” and how is it used in designing pneumatic conveying systems?

Description : What is a “saltation velocity” and how is it used in designing pneumatic conveying systems?

Last Answer : The saltation velocity is defined as the actual gas velocity (in a horizontal pipe run) at which the particles of a homogeneous solid flow will start to fall out of the gas stream. In designing, the ... 2.5 while the factor could be as high as five for course particles such as soybeans could.

Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Description : Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

The bulk density of aggregates, depends upon (A) Shape (B) Grading (C) Compaction (D) All the above

Description : The bulk density of aggregates, depends upon (A) Shape (B) Grading (C) Compaction (D) All the above

Last Answer : Answer: Option D

When a small spherical body falls in a viscous fluid, its speed increases first, then deceases and eventually it acquires a constant speed called the terminal speed. The terminal speed depends upon (a) The density and viscosity of the fluid (b) The density of the body (c) The diameter of the body (d) All the above parameters

Description : When a small spherical body falls in a viscous fluid, its speed increases first, then deceases and eventually it acquires a constant speed called the terminal speed. The terminal speed depends upon (a) The ... ) The density of the body (c) The diameter of the body (d) All the above parameters

Last Answer : Ans:(d)

The rate of heat transfer from a vertical plate by natural convection depends upon the temperature differences (ΔT) between wall and outside bulk. The proportionality is given as (A) (ΔT) 1/4 (B) (ΔT) 1/2 (C) (ΔT) 5/4 (D) (ΔT) 3/4

Description : The rate of heat transfer from a vertical plate by natural convection depends upon the temperature differences (ΔT) between wall and outside bulk. The proportionality is given as (A) (ΔT) 1/4 (B) (ΔT) 1/2 (C) (ΔT) 5/4 (D) (ΔT) 3/4

Last Answer : (D) (ΔT) 3/4

Assume that the speed (v) of sound in air depends upon the pressure (P) and density (ρ) of air, then use dimensional analysis to obtain

Description : Assume that the speed (v) of sound in air depends upon the pressure (P) and density (ρ) of air, then use dimensional analysis to obtain

Last Answer : Assume that the speed (v) of sound in air depends upon the pressure (P) and density (ρ) ... analysis to obtain an expression for the speed of sound.

For laminar flow of a fluid through a packed bed of spheres of diameter d, the pressure drop per unit length of bed depends upon the sphere diameter as (A) d (B) d 2 (C) d 4 (D) d

Description : For laminar flow of a fluid through a packed bed of spheres of diameter d, the pressure drop per unit length of bed depends upon the sphere diameter as (A) d (B) d 2 (C) d 4 (D) d

Last Answer : (D) d

Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ

Description : Capacity of flight conveyor in tons/hr is given by (where, W & D = width and depth of flight respectively in metre V = speed of the conveyor, metre/second ρ = bulk density of material, kg/m3 ) (A) 3.6 W.D.V.ρ (B) 3.6 W.D.V (C) 3.6 W.V.ρ (D) 3.6 D.V.ρ

Last Answer : (A) 3.6 W.D.V.ρ

Pressure exerted by a liquid depends upon its (A) Surface tension (B) Density (C) Viscosity

Description : Pressure exerted by a liquid depends upon its (A) Surface tension (B) Density (C) Viscosity

Last Answer : Option B

At a fixed total pressure, humidity depends only on the (A) Partial pressure of vapour in the mixture (B) Heat capacity of the vapour (C) Density of the vapour (D) None of these

Description : At a fixed total pressure, humidity depends only on the (A) Partial pressure of vapour in the mixture (B) Heat capacity of the vapour (C) Density of the vapour (D) None of these

Last Answer : (A) Partial pressure of vapour in the mixture

Shell side pressure drop in a shell and tube heat exchanger does not depend upon the (A) Baffle spacing & shell diameter (B) Tube diameter & pitch (C) Viscosity, density & mass velocity of shell side fluid (D) None of these

Description : Shell side pressure drop in a shell and tube heat exchanger does not depend upon the (A) Baffle spacing & shell diameter (B) Tube diameter & pitch (C) Viscosity, density & mass velocity of shell side fluid (D) None of these

Last Answer : (D) None of these

Self cleaning velocity of a sewer line depends upon (a) Diameter of sewer (b) Gradient of ewer line (c) Type of sewerage (d) All of them*

Description : Self cleaning velocity of a sewer line depends upon (a) Diameter of sewer (b) Gradient of ewer line (c) Type of sewerage (d) All of them*

Last Answer : d) All of them*

Allowable bearing pressure for a foundation depends upon (A) Allowable settlement only (B) Ultimate bearing capacity of soil only (C) Both allowable settlement and ultimate bearing capacity (D) None of above

Description : Allowable bearing pressure for a foundation depends upon (A) Allowable settlement only (B) Ultimate bearing capacity of soil only (C) Both allowable settlement and ultimate bearing capacity (D) None of above

Last Answer : (C) Both allowable settlement and ultimate bearing capacity

The bulk density of aggregates does not depend upon: (A) Size and shape of aggregates (B) Specific gravity of aggregates (C) Grading of aggregates (D) Size and shape of the container

Description : The bulk density of aggregates does not depend upon: (A) Size and shape of aggregates (B) Specific gravity of aggregates (C) Grading of aggregates (D) Size and shape of the container

Last Answer : Answer: Option D

The penetration of x-rays through an object depends upon the object’s _____. A. Density B. Shape C. Pressure D. Size

Description : The penetration of x-rays through an object depends upon the object’s _____. A. Density B. Shape C. Pressure D. Size

Last Answer : ANSWER: A

The boiling point of water depends upon the – (1) atmospheric pressure (2) volume (3) density (4) mass

Description : The boiling point of water depends upon the – (1) atmospheric pressure (2) volume (3) density (4) mass

Last Answer : (1) atmospheric pressure Explanation: The boiling point corresponds of water to the ternperature at which its vapour pressure equals the surrounding environmental pressure. So it is dependent on ... pressure decreases. As this pressure decreases, the boiling point of the water also decreases.

Pressure in fluid depends upon A. depth below the surface B. density of fluid C. the value of gD. all of above

Description :  Pressure in fluid depends upon A. depth below the surface B. density of fluid C. the value of g D. all of above

Last Answer : all of above

The shearing strength of a cohesion-less soil depends upon (A) Dry density (B) Rate of loading (C) Confining pressure (D) Nature of loading

Description : The shearing strength of a cohesion-less soil depends upon (A) Dry density (B) Rate of loading (C) Confining pressure (D) Nature of loading

Last Answer : Answer: Option C

Liquid pressure at any point inside the liquid, depends upon _______of the liquid and the height of liquid column above that point. a) area b)density c)weight d)none

Description : Liquid pressure at any point inside the liquid, depends upon _______of the liquid and the height of liquid column above that point. a) area b)density c)weight d)none

Last Answer : b)density

The boiling point of water depends upon the (1) atmospheric pressure (2) volume (3) density (4) mass

Description : The boiling point of water depends upon the (1) atmospheric pressure (2) volume (3) density (4) mass

Last Answer : atmospheric pressure

Minimum fluidisation velocity for a specific system depends upon the (A) Particle size (B) Fluid viscosity (C) Density of both the particle & the fluid (D) All (A), (B) and (C)

Description : Minimum fluidisation velocity for a specific system depends upon the (A) Particle size (B) Fluid viscosity (C) Density of both the particle & the fluid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Dust collection efficiency of a cyclone separator depends upon its (A) Diameter (B) Inlet gas velocity (C) Overall height (D) All (A), (B) & (C)

Description : Dust collection efficiency of a cyclone separator depends upon its (A) Diameter (B) Inlet gas velocity (C) Overall height (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Vertical transportation of materials can be done by a/an (A) Apron conveyor (B) Pneumatic conveyor (C) Bucket elevator (D) Both (B) & (C)

Description : Vertical transportation of materials can be done by a/an (A) Apron conveyor (B) Pneumatic conveyor (C) Bucket elevator (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

The capacity of a belt conveyor depends upon two factors. If one is the cross-section of the load, the other is the __________ of the belt. (A) Speed (B) Thickness (C) Length (D) None of these

Description : The capacity of a belt conveyor depends upon two factors. If one is the cross-section of the load, the other is the __________ of the belt. (A) Speed (B) Thickness (C) Length (D) None of these

Last Answer : (A) Speed

Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The heating capacity of continuous reheating furnace depends upon the (A) Hearth area and furnace temperature (B) Emissivity of the stock (C) Ratio of wall surface to stock surface (D) All (A), (B) and (C)

Description : The heating capacity of continuous reheating furnace depends upon the (A) Hearth area and furnace temperature (B) Emissivity of the stock (C) Ratio of wall surface to stock surface (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Horsepower requirement for given pump capacity depends upon the (A) Specific gravity of the liquid (B) Suction lift (C) Discharge head (D) All (A), (B) and (C)

Description : Horsepower requirement for given pump capacity depends upon the (A) Specific gravity of the liquid (B) Suction lift (C) Discharge head (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Sele(A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement. (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter

Separation of a mixture of two gases by absorption in the liquid solvent depends upon the difference in their (A) Viscosity (B) Density (C) Solubility (D) Relative volatility

Description : Separation of a mixture of two gases by absorption in the liquid solvent depends upon the difference in their (A) Viscosity (B) Density (C) Solubility (D) Relative volatility

Last Answer : (C) Solubility

Natural draught produced by a chimney depends upon the (A) Density of the chimney gases (B) Height of the chimney (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Natural draught produced by a chimney depends upon the (A) Density of the chimney gases (B) Height of the chimney (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The dimensional formula of bulk modulus of elasticity is same as that of the (A) Pressure (B) Density (C) Force (D) None of these

Description : The dimensional formula of bulk modulus of elasticity is same as that of the (A) Pressure (B) Density (C) Force (D) None of these

Last Answer : Option A

Location of vena-contracta in an orificemeter does not depend upon the (A) Type of orifice (B) Density, viscosity & compressibility of the fluid (C) Ratio of pipe diameter to orifice diameter (D) Pipe roughness

Description : Location of vena-contracta in an orificemeter does not depend upon the (A) Type of orifice (B) Density, viscosity & compressibility of the fluid (C) Ratio of pipe diameter to orifice diameter (D) Pipe roughness

Last Answer : (A) Type of orifice

Transition from laminar flow to turbulent flow in fluid flow through a pipe does not depend upon the (A) Length of the pipe (B) Diameter of the pipe (C) Density of the fluid (D) Velocity of the fluid

Description : Transition from laminar flow to turbulent flow in fluid flow through a pipe does not depend upon the (A) Length of the pipe (B) Diameter of the pipe (C) Density of the fluid (D) Velocity of the fluid

Last Answer : (A) Length of the pipe

Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls in rotation per second (rps) D = diameter of rolls, m). (A) 3.6 V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Description : Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls ... V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Last Answer : (A) 3.6 V.W.Dr.ρ

Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases. (A) NPSH required (B) BHP required by the pump (C) Head of the liquid pumped (D) All (A), (B) and (C)

Description : Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases. (A) ... the pump (C) Head of the liquid pumped (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The gradient of sewers depends upon A. Velocity of flow B. Diameter of the sewer C. Discharge D. All the above

Description : The gradient of sewers depends upon A. Velocity of flow B. Diameter of the sewer C. Discharge D. All the above

Last Answer : ANS: D

The field capacity of a soil depends upon a. Capillary tension in soil b. Porosity of soil c. Both (a) and (b) d. Neither (a) nor (b)

Description : The field capacity of a soil depends upon a. Capillary tension in soil b. Porosity of soil c. Both (a) and (b) d. Neither (a) nor (b)

Last Answer : c. Both (a) and (b)

Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a soil depends upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Description : Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a ... upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Last Answer : Answer: Option A

The bearing capacity of a soil depends upon (A) Size of the particles (B) Shape of the particles (C) Cohesive properties of particles (D) All the above

Description : The bearing capacity of a soil depends upon (A) Size of the particles (B) Shape of the particles (C) Cohesive properties of particles (D) All the above

Last Answer : Answer: Option D

Infiltration capacity of soil depends upon (A) Number of voids present in the soil (B) Shape and size of soil particles (C) Arrangement of soil particles (D) All the above

Description : Infiltration capacity of soil depends upon (A) Number of voids present in the soil (B) Shape and size of soil particles (C) Arrangement of soil particles (D) All the above

Last Answer : Answer: Option D

The thickness of the layer of insulation on the conductor, in cables, depends upon (a) Reactive power (b) Power factor (c) Voltage (d) Current carrying capacity

Description : The thickness of the layer of insulation on the conductor, in cables, depends upon (a) Reactive power (b) Power factor (c) Voltage (d) Current carrying capacity

Last Answer : (c) Voltage