Purity of coke means that, it is high in carbon and low in(A) Volatiles(B) Ash(C) Iron(D) Moisture

Purity of coke means that, it is high in carbon and low in
(A) Volatiles
(B) Ash
(C) Iron
(D) Moisture
by

1 Answer

Answer :

(A) Volatiles
by

Related questions

Which of the following constituents of coal is the most important in the production of coke? (A) Moisture (B) Ash (C) Volatiles (D) Carbon

Description : Which of the following constituents of coal is the most important in the production of coke? (A) Moisture (B) Ash (C) Volatiles (D) Carbon

Last Answer : (D) Carbon

A good metallurgical coke (A) Should have high porosity (B) Should be brittle (C) Must contain moderate quantities of ash, moisture, sulphur and volatile matters (D) Should have low fusion point of its ash

Description : A good metallurgical coke (A) Should have high porosity (B) Should be brittle (C) Must contain moderate quantities of ash, moisture, sulphur and volatile matters (D) Should have low fusion point of its ash

Last Answer : (A) Should have high porosity

Degree of carbonisation of coal during coke making can be roughly judged by the __________ of the coke produced. (A) Colour (B) Moisture content (C) Ash content (D) Volatile matter

Description : Degree of carbonisation of coal during coke making can be roughly judged by the __________ of the coke produced. (A) Colour (B) Moisture content (C) Ash content (D) Volatile matter

Last Answer : (D) Volatile matter

Out of the following, which is the most important parameter for the blast furnace grade coke? (A) CSR & CRI (B) Ash content (C) Moisture content (D) Volatile matter content

Description : Out of the following, which is the most important parameter for the blast furnace grade coke? (A) CSR & CRI (B) Ash content (C) Moisture content (D) Volatile matter content

Last Answer : (A) CSR & CRI

The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Description : The reason for excessive clinker formation in gas producers is the (A) Use of coal/coke containing a high % of fines and ash (B) Use of fuel having too low an ash fusion temperature (C) Development of hot spots in the fuel bed and an abnormally high rate of gasification (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is unsuitable fuel for producer gas manufacture? (A) Coke (B) Anthracite (C) Coal having low fusion point of its ash (D) Coal having high fusion point of its ash

Description : Which of the following is unsuitable fuel for producer gas manufacture? (A) Coke (B) Anthracite (C) Coal having low fusion point of its ash (D) Coal having high fusion point of its ash

Last Answer : (C) Coal having low fusion point of its ash

Coke used for the production of calcium carbide should have (A) Low ash content (B) Low ignition temperature (C) High electrical resistivity (D) All (A), (B) and (C)

Description : Coke used for the production of calcium carbide should have (A) Low ash content (B) Low ignition temperature (C) High electrical resistivity (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Coke compared to the coal from which it has been made, contains (A) Less volatile matter (B) More carbon (C) Greater percentage of ash (D) All (A), (B) and (C)

Description : Coke compared to the coal from which it has been made, contains (A) Less volatile matter (B) More carbon (C) Greater percentage of ash (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The specific gravity of coal depends mainly on its __________ content. (A) Carbon (B) Volatile matter (C) Ash (D) Moisture

Description : The specific gravity of coal depends mainly on its __________ content. (A) Carbon (B) Volatile matter (C) Ash (D) Moisture

Last Answer : (C) Ash

Fixed carbon in coal is defined as (A) That present in volatile matters (B) The total quantity of carbon present in the coal (C) Hundred minus the percentage of volatile matter, ash and moisture (D) The one which is present in the residue after combustion

Description : Fixed carbon in coal is defined as (A) That present in volatile matters (B) The total quantity of carbon present in the coal (C) Hundred minus the percentage of volatile matter, ash and moisture (D) The one which is present in the residue after combustion

Last Answer : (C) Hundred minus the percentage of volatile matter, ash and moisture

Ultimate analysis of coal determines its __________ content. (A) Carbon, hydrogen, nitrogen & sulphur (B) Carbon, ash, sulphur & nitrogen (C) Carbon, sulphur, volatile matter & ash (D) Carbon, volatile matter, ash & moisture

Description : Ultimate analysis of coal determines its __________ content. (A) Carbon, hydrogen, nitrogen & sulphur (B) Carbon, ash, sulphur & nitrogen (C) Carbon, sulphur, volatile matter & ash (D) Carbon, volatile matter, ash & moisture

Last Answer : (A) Carbon, hydrogen, nitrogen & sulphur

Proximate analysis of coal determines its __________ content. (A) Moisture, ash, sulphur & volatile matter (B) Moisture, volatile matter, ash & fixed carbon (C) Moisture, sulphur, nitrogen & fixed carbon (D) None of these

Description : Proximate analysis of coal determines its __________ content. (A) Moisture, ash, sulphur & volatile matter (B) Moisture, volatile matter, ash & fixed carbon (C) Moisture, sulphur, nitrogen & fixed carbon (D) None of these

Last Answer : (B) Moisture, volatile matter, ash & fixed carbon

Ignition temperature decreases progressively from anthracite to lignite, because (A) Volatile matter content increases (B) Carbon content decreases (C) Moisture content increases (D) Ash content increases

Description : Ignition temperature decreases progressively from anthracite to lignite, because (A) Volatile matter content increases (B) Carbon content decreases (C) Moisture content increases (D) Ash content increases

Last Answer : (A) Volatile matter content increases

Proximate analysis of coal determines its __________ content. (A) Moisture, ash, sulphur & volatile matter (B) Moisture & volatile matter (C) Moisture, sulphur, nitrogen & fixed carbon (D) None of these

Description : Proximate analysis of coal determines its __________ content. (A) Moisture, ash, sulphur & volatile matter (B) Moisture & volatile matter (C) Moisture, sulphur, nitrogen & fixed carbon (D) None of these

Last Answer : (B) Moisture & volatile matter

Ultimate analysis of coal determines its __________ content. (A) Carbon, hydrogen, nitrogen & sulphur (B) Carbon, ash, sulphur & nitrogen(C) Carbon, sulphur, volatile matter & ash(D) Carbon, volatile matter, ash & moisture

Description : Ultimate analysis of coal determines its __________ content. (A) Carbon, hydrogen, nitrogen & sulphur (B) Carbon, ash, sulphur & nitrogen (C) Carbon, sulphur, volatile matter & ash (D) Carbon, volatile matter, ash & moisture

Last Answer : (C) Carbon, sulphur, volatile matter & ash

The specific gravity of coal depends mainly on its __________ content. (A) Carbon (B) Volatile matter (C) Ash (D) Moisture

Description : The specific gravity of coal depends mainly on its __________ content. (A) Carbon (B) Volatile matter (C) Ash (D) Moisture

Last Answer : Option D

A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Description : A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Last Answer : (A) Sulphur & phosphorous content

High ash coals (A) Are soft & friable (poor strength and size stability) (B) Require longer time of carbonisation as ash offers resistance to heat transfer (C) Produce larger quantity of coke oven gas (D) None of these

Description : High ash coals (A) Are soft & friable (poor strength and size stability) (B) Require longer time of carbonisation as ash offers resistance to heat transfer (C) Produce larger quantity of coke oven gas (D) None of these

Last Answer : (A) Are soft & friable (poor strength and size stability)

Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct process of by-product recovery (C) A high swelling index number of coking coal indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Description : Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct ... indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas

Last Answer : (C) A high swelling index number of coking coal indicates poor caking properties of coal

High ash containing coke (A) Produces more slag when used in the blast(B) Has poor strength and abrasion resistance(C) Is desirable in producer gas manufacture(D) None of these furnace

Description : High ash containing coke (A) Produces more slag when used in the blast furnace (B) Has poor strength and abrasion resistance (C) Is desirable in producer gas manufacture (D) None of these

Last Answer : (A) Produces more slag when used in the blast furnace

A good coking coal should have high __________ content. (A) Ash (B) Sulphur & phosphorus (C) Moisture (D) None of these

Description : A good coking coal should have high __________ content. (A) Ash (B) Sulphur & phosphorus (C) Moisture (D) None of these

Last Answer : (D) None of these

Fat coals' are those coals which have very high (A) Caking capacity (B) Volatile matter content (C) Fusion point of its ash (D) Inherent moisture conten

Description : Fat coals' are those coals which have very high (A) Caking capacity (B) Volatile matter content (C) Fusion point of its ash (D) Inherent moisture conten

Last Answer : (A) Caking capacity

Pulverised coal used in boiler firing need not have (A) Less moisture content (B) High fusion point of its ash (C) High bulk density (D) Lower ash conten

Description : Pulverised coal used in boiler firing need not have (A) Less moisture content (B) High fusion point of its ash (C) High bulk density (D) Lower ash conten

Last Answer : (B) High fusion point of its ash

How come moisture mentioned in SEA J2099 standards of refrigerant purity?

Description : How come moisture mentioned in SEA J2099 standards of refrigerant purity?

Last Answer : What is the answer ?

Fat' coal means a coal having (A) Low calorific value (B) High volatile matter (C) Low ash content

Description : Fat' coal means a coal having (A) Low calorific value (B) High volatile matter (C) Low ash content

Last Answer : (B) High volatile matter

Presence of free moisture in coal during its high temperature carbonisation (A) Reduces the coking time (B) Protects the volatile products from pyrolysis (cracking) in the presence of hot coke and hot oven walls (C) Increases the loss of fine coal dust from the ovens when charging (D) None of these

Description : Presence of free moisture in coal during its high temperature carbonisation (A) Reduces the coking time (B) Protects the volatile products from pyrolysis (cracking) in the presence of hot coke and hot oven walls (C) Increases the loss of fine coal dust from the ovens when charging (D) None of these

Last Answer : (B) Protects the volatile products from pyrolysis (cracking) in the presence of hot coke and hot oven walls

64-132) rank coal (ASTM) means a coal with 64% (A) Fixed carbon and having a heating value around 13, 200 BTU/1b (B) Ash and heating value around 13, 200 BTU/1b (C) Fixed carbon and heating value around 132 BTU/1b (D) None of these

Description : 64-132) rank coal (ASTM) means a coal with 64% (A) Fixed carbon and having a heating value around 13, 200 BTU/1b (B) Ash and heating value around 13, 200 BTU/1b (C) Fixed carbon and heating value around 132 BTU/1b (D) None of these

Last Answer : (A) Fixed carbon and having a heating value around 13, 200 BTU/1b

64-132) rank coal (ASTM) means a coal with 64% (A) Fixed carbon and having a heat value of 13, 200 BTU/1b (B) Ash and a heating value of 13, 200 BTU/1b (C) Fixed carbon and a heating value of 132 BTU/1b (D) None of these

Description : 64-132) rank coal (ASTM) means a coal with 64% (A) Fixed carbon and having a heat value of 13, 200 BTU/1b (B) Ash and a heating value of 13, 200 BTU/1b (C) Fixed carbon and a heating value of 132 BTU/1b (D) None of these

Last Answer : (A) Fixed carbon and having a heat value of 13, 200 BTU/1b

Higher percentage of ash in coal meant for the production of metallurgical grade coke (A) Decreases the hardness of coke (B) Decreases the abrasion resistance of coke (C) Causes brittleness in steel (D) None of these

Description : Higher percentage of ash in coal meant for the production of metallurgical grade coke (A) Decreases the hardness of coke (B) Decreases the abrasion resistance of coke (C) Causes brittleness in steel (D) None of these

Last Answer : (D) None of these

Increase in ash content of blast furnace coke (A) Reduces its consumption in the furnace (B) Increases its consumption in the furnace (C) Does not affect its consumption in the furnace (D) Decreases its hardness and abrasion resistance

Description : Increase in ash content of blast furnace coke (A) Reduces its consumption in the furnace (B) Increases its consumption in the furnace (C) Does not affect its consumption in the furnace (D) Decreases its hardness and abrasion resistance

Last Answer : (B) Increases its consumption in the furnace

Pick out the wrong statement. (A) Percentage of ash in coke produced from medium coking coal is more than that in coal (B) The calorific value (kcal/Nm3 ) of coke oven gas reduces on removal of hydrogen from it by cryogenic method (C) Ash is normally removed as 'fly-ash' in Kopper-Totzek process of coal gasification (D) Coal based fertiliser plants in India at Talcher (Orissa) and Ramagundam (A.P) employ Kopper-Totzek process of coal gasification

Description : Pick out the wrong statement. (A) Percentage of ash in coke produced from medium coking coal is more than that in coal (B) The calorific value (kcal/Nm3 ) of coke oven gas reduces on ... plants in India at Talcher (Orissa) and Ramagundam (A.P) employ Kopper-Totzek process of coal gasification

Last Answer : (C) Ash is normally removed as 'fly-ash' in Kopper-Totzek process of coal gasification

Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24

Description : Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24

Last Answer : (D) 24

Which of the following coke has the least percentage of ash? (A) Petroleum coke (B) Beehive coke (C) Foundry coke (D) Metallurgical coke

Description : Which of the following coke has the least percentage of ash? (A) Petroleum coke (B) Beehive coke (C) Foundry coke (D) Metallurgical coke

Last Answer : (A) Petroleum coke

Which of the following would require least amount of secondary air for combustion? (A) Coke breeze containing 25% ash and 2% volatile matter (B) Anthracite containing 10% volatile matter and 8% ash(C) Bituminous coal containing 20% ash and 25% volatile matter(D) Semi-bituminous coal containing 25% ash and 20% volatile matter

Description : Which of the following would require least amount of secondary air for combustion? (A) Coke breeze containing 25% ash and 2% volatile matter (B) Anthracite containing 10% volatile matter and 8% ash ... ash and 25% volatile matter (D) Semi-bituminous coal containing 25% ash and 20% volatile matter

Last Answer : (A) Coke breeze containing 25% ash and 2% volatile matter

Raw materials for 'Solvay Process' for manufacture of the soda ash are (A) Salt, limestone and coke or gas(B) Ammonia, salt and limestone(C) Ammonia limestone and coke(D) None of these

Description : Raw materials for 'Solvay Process' for manufacture of the soda ash are (A) Salt, limestone and coke or gas (B) Ammonia, salt and limestone (C) Ammonia limestone and coke (D) None of these

Last Answer : (A) Salt, limestone and coke or gas

Commercial production of calcium carbide requires limestone and __________ as raw materials. (A) Coke (B) Sand (C) Soda ash (D) Fuel oil

Description : Commercial production of calcium carbide requires limestone and __________ as raw materials. (A) Coke (B) Sand (C) Soda ash (D) Fuel oil

Last Answer : (B) Sand

Sand and __________ is fused at 1300°C, to produce sodium silicate. (A) Limestone (B) Soda ash (C) Coke (D) Sodium sulphate

Description : Sand and __________ is fused at 1300°C, to produce sodium silicate. (A) Limestone (B) Soda ash (C) Coke (D) Sodium sulphate

Last Answer : (B) Soda ash

Which of the following may be viewed as a catalyst in the manufacturesoda ash by Solvay process?(A) NH3(B) NaCl(C) CaO(D) Coke

Description : Which of the following may be viewed as a catalyst in the manufacturesoda ash by Solvay process? (A) NH3 (B) NaCl (C) CaO (D) Coke

Last Answer : (A) NH3

Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these

Description : Commercial production of soda ash by Solvay process requires limestone, __________ as raw materials. (A) Coke and sand (B) Brine and coal (C) Coke and caustic soda (D) None of these

Last Answer : (B) Brine and coal

How was the atmosphere on Earth first formed? (a) Spontaneous combustion. (b) By comets and meteors, which were much more common at that time, delivering volatiles. (c) Evaporation from the ocean. (d) Volcanic emissions.

Description : How was the atmosphere on Earth first formed? (a) Spontaneous combustion. (b) By comets and meteors, which were much more common at that time, delivering volatiles. (c) Evaporation from the ocean. (d) Volcanic emissions.

Last Answer : (b) By comets and meteors, which were much more common at that time, delivering volatiles.

The donor plants release allelochemicals in the immediate environment as a). volatiles b). root exudates c). microbial decomposition products d). All

Description : The donor plants release allelochemicals in the immediate environment as a). volatiles b). root exudates c). microbial decomposition products d). All

Last Answer : d). All

Transformer cores are normally made from (A) Soft ferrites (B) High purity iron (C) Grain oriented Fe-Si alloy (D) Al-Ni-Co alloy

Description : Transformer cores are normally made from (A) Soft ferrites (B) High purity iron (C) Grain oriented Fe-Si alloy (D) Al-Ni-Co alloy

Last Answer : (C) Grain oriented Fe-Si alloy

Electrolytic reduction cell used for conversion of calcined Al2O3to Al is a carbon lined furnace operating at 800-900 °C. The purpose of electric current supplied to the furnace is to (A) Achieve very high purity of aluminium (99.9%) (B) Keep the electrolyte in liquid condition by the generation of heat (C) Electrolytically dissociate alumina (D) Both (B) & (C)

Description : Electrolytic reduction cell used for conversion of calcined Al2O3to Al is a carbon lined furnace operating at 800-900 °C. The purpose of electric current supplied to the furnace is to (A) Achieve very high ... by the generation of heat (C) Electrolytically dissociate alumina (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

In high temperature carbonisation (as compared to low temperature carbonisation) of coal (A) Coke oven gas yield is more (B) Tar yield is less but free carbon in tar is more (C) Calorific value of coke oven gas is less (D) All (A), (B) and (C)

Description : In high temperature carbonisation (as compared to low temperature carbonisation) of coal (A) Coke oven gas yield is more (B) Tar yield is less but free carbon in tar is more (C) Calorific value of coke oven gas is less (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In low temperature carbonisation of coal as compared to high temperature carbonisation __________ produced is less. (A) Difference in gross & net calorific value of the coke oven gas (B) Free carbon content in tar (C) Yield percentage of coke (D) Yield of ammonia present in coke oven gas

Description : In low temperature carbonisation of coal as compared to high temperature carbonisation __________ produced is less. (A) Difference in gross & net calorific value of the coke oven gas (B) Free carbon content in tar (C) Yield percentage of coke (D) Yield of ammonia present in coke oven gas

Last Answer : (A) Difference in gross & net calorific value of the coke oven gas

Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low boiling products are prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose

Gross and net calorific value of a fuel will be the same (A) If its ash content is zero (B) If its carbon content is very low (C) If its hydrogen/hydrogen compound content is zero (D) Under no circumstances

Description : Gross and net calorific value of a fuel will be the same (A) If its ash content is zero (B) If its carbon content is very low (C) If its hydrogen/hydrogen compound content is zero (D) Under no circumstances

Last Answer : (C) If its hydrogen/hydrogen compound content is zero

Naphthalene recovered from coke oven gas is used (A) As moisture proof coating on fibres(B) As moth balls (insecticides)(C) As a fuel in furnaces(D) For making electrodes

Description : Naphthalene recovered from coke oven gas is used (A) As moisture proof coating on fibres (B) As moth balls (insecticides) (C) As a fuel in furnaces (D) For making electrodes

Last Answer : (C) As a fuel in furnaces

Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ions and forms amino acids(B) Calcium present in the fertiliser helps in correcting the soil acidity(C) Particle size range of a good granular fertiliser is 10-15 mesh and itcontains less moisture as compared to finely divided powder form of fertiliser(D) Ammonium nitrate fertiliser is obtained as a by-product in an integratedsteel plant having by-product coke ovens

Description : Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ... nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

Last Answer : (D) Ammonium nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore

Description : Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore

Last Answer : (C) Manufacture of carbon electrode