Description : Washing of coal (A) Reduces its ash & sulphur content (B) Improves its coking properties (C) Increase the fusion point of its ash by removing chlorine compounds (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Ultimate analysis of coal determines its __________ content. (A) Carbon, hydrogen, nitrogen & sulphur (B) Carbon, ash, sulphur & nitrogen (C) Carbon, sulphur, volatile matter & ash (D) Carbon, volatile matter, ash & moisture
Last Answer : (A) Carbon, hydrogen, nitrogen & sulphur
Description : Proximate analysis of coal determines its __________ content. (A) Moisture, ash, sulphur & volatile matter (B) Moisture, volatile matter, ash & fixed carbon (C) Moisture, sulphur, nitrogen & fixed carbon (D) None of these
Last Answer : (B) Moisture, volatile matter, ash & fixed carbon
Description : Proximate analysis of coal determines its __________ content. (A) Moisture, ash, sulphur & volatile matter (B) Moisture & volatile matter (C) Moisture, sulphur, nitrogen & fixed carbon (D) None of these
Last Answer : (B) Moisture & volatile matter
Last Answer : (C) Carbon, sulphur, volatile matter & ash
Description : A coal with high ash content is undesirable, as (A) It is abrasive to the coal pulveriser (i.e. ball mill) and the combustion chamber (B) The ash in molten condition gets absorbed in the pores of the ... and stick to the boiler tubes thereby reducing the heat transfer (D) All (A), (B) and (C)
Description : Washing of coal (A) Reduces its sulphur and ash content (B) Controls its ash fusibility and increases its calorific value (C) Improves its coking properties (D) All (A), (B) and (C)
Description : Ash content in the coke produced from a coking coal having 20% ash may be around __________ percent. (A) 6 (B) 12 (C) 18 (D) 24
Last Answer : (D) 24
Description : Which of the following statement (s) regarding India's coal reserves is/are true ? 1. Over 90 percent of total reserves are located in the valleys of Son, Damodar, Mahanadi and Godavari 2. Indian coal reserves are characterised ... reserves (a) I only (b) I and III (c) II and III (d) I, II and III
Last Answer : Ans: (c)
Description : During coking of coal, the ash content (percentage) (A) Increases (B) Decreases (C) Remain constant (D) None of these
Last Answer : (A) Increases
Description : Softening temperature of coal ash is a measure of the __________ of coal. (A) Caking tendency (B) Coking tendency (C) Clinkering tendency (D) Size stability
Last Answer : (C) Clinkering tendency
Description : The specific gravity of coal depends mainly on its __________ content. (A) Carbon (B) Volatile matter (C) Ash (D) Moisture
Last Answer : (C) Ash
Description : Degree of carbonisation of coal during coke making can be roughly judged by the __________ of the coke produced. (A) Colour (B) Moisture content (C) Ash content (D) Volatile matter
Last Answer : (D) Volatile matter
Last Answer : Option D
Description : Pick out the wrong statement. (A) Indian coals on an average contain 25-30% ash as against 10-12% ash in imported coking coal (B) Ammonia is recovered in the form of ammonium sulphate in direct ... indicates poor caking properties of coal (D) Wash oil is used for scrubbing Benzol from coke oven gas
Last Answer : (C) A high swelling index number of coking coal indicates poor caking properties of coal
Description : Pulverised coal used in boiler firing need not have (A) Less moisture content (B) High fusion point of its ash (C) High bulk density (D) Lower ash conten
Last Answer : (B) High fusion point of its ash
Description : A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur (D) None of these
Last Answer : (D) None of these
Description : A good quality coal should have (A) Low fusion point of ash (B) High ash content (C) High sulphur content (D) None of these
Description : Presence of free moisture in coal during its high temperature carbonisation (A) Reduces the coking time (B) Protects the volatile products from pyrolysis (cracking) in the presence of hot coke and hot oven walls (C) Increases the loss of fine coal dust from the ovens when charging (D) None of these
Last Answer : (B) Protects the volatile products from pyrolysis (cracking) in the presence of hot coke and hot oven walls
Description : Consider the following statements: 1. Gondwana coal is a laminated, bituminous coal. . 2. Gondwana coal is completely free from moisture, sulphur and phosphorus. Which of the statements given above is/are correct? [IAS 2008] (a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2
Last Answer : Ans: (a)
Description : Pick out the wrong statement. (A) Percentage of ash in coke produced from medium coking coal is more than that in coal (B) The calorific value (kcal/Nm3 ) of coke oven gas reduces on ... plants in India at Talcher (Orissa) and Ramagundam (A.P) employ Kopper-Totzek process of coal gasification
Last Answer : (C) Ash is normally removed as 'fly-ash' in Kopper-Totzek process of coal gasification
Description : Volatile matter content in coking coal may be about __________ percent. (A) 1 (B) 7 (C) 22 (D) 46
Last Answer : (C) 22
Description : A good metallurgical coke (A) Should have high porosity (B) Should be brittle (C) Must contain moderate quantities of ash, moisture, sulphur and volatile matters (D) Should have low fusion point of its ash
Last Answer : (A) Should have high porosity
Description : Assam (India) coals suffers mainly from the disadvantage of high __________ content. (A) Ash (B) Volatile matter (C) Sulphur (4-6%)
Last Answer : (C) Sulphur (4-6%)
Description : Fussain (A) Is friable, charcoal like substance (B) Has highest fixed carbon and lowest volatile matter content of all the four banded components of coal (C) Is non-coking, but when blended with highly coking ... its swelling and produces high strength coke on carbonisation (D) All (A), (B) and (C)
Description : Cannel coal (A) Is non-coking (B) Has a high volatile matter content and burns with a luminous smoky flame (C) Is a non-banded coal which can be ignited easily with a match stick or candle flame, hence is so named (D) All (A), (B) and (C
Last Answer : (D) All (A), (B) and (C
Description : Out of the following, which is the most important parameter for the blast furnace grade coke? (A) CSR & CRI (B) Ash content (C) Moisture content (D) Volatile matter content
Last Answer : (A) CSR & CRI
Description : A coal with high __________ content, would ignite most easily. (A) Fixed carbon (B) Volatile matter (C) Ash (D) Oxygen
Last Answer : (B) Volatile matter
Description : A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength
Last Answer : (A) Sulphur & phosphorous content
Description : Fat coals' are those coals which have very high (A) Caking capacity (B) Volatile matter content (C) Fusion point of its ash (D) Inherent moisture conten
Last Answer : (A) Caking capacity
Description : Bomb calorimeter can be used to determine the __________ of the coal. (A) Sulphur content (B) Calorific value (C) Both (A) & (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) & (B)
Description : Coking time in a commercial high temperature coal carbonisation plant is about __________ hours. (A) 6 (B) 18 (C) 28
Last Answer : (B) 18
Description : Fixed carbon in coal is defined as (A) That present in volatile matters (B) The total quantity of carbon present in the coal (C) Hundred minus the percentage of volatile matter, ash and moisture (D) The one which is present in the residue after combustion
Last Answer : (C) Hundred minus the percentage of volatile matter, ash and moisture
Description : Which of the following constituents of coal is the most important in the production of coke? (A) Moisture (B) Ash (C) Volatiles (D) Carbon
Last Answer : (D) Carbon
Description : Coal is heated in presence of air to a temperature of about __________ °C, while determining its ash content for proximate analysis. (A) 500 (B) 750 (C) 950 (D) 1100
Last Answer : (B) 750
Description : Fusion point of coal ash increases with increase in its __________ content. (A) Iron sulphate (B) Iron silicate (C) Lime and magnesia (D) All (A), (B) and (C)
Description : Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75
Last Answer : (B) 35 to 45
Description : In producer gas making furnace, steam is added along with air to mainly control the (A) Fusion of coal ash & clinker formation (B) C. V. of producer gas (C) Temperature of producer gas (D) Tar content in producer gas
Last Answer : (A) Fusion of coal ash & clinker formation
Description : Washing of coal does not reduce its (A) S & P content (B) Heating value (C) Fusion point of ash (D) None of these
Description : Ignition temperature decreases progressively from anthracite to lignite, because (A) Volatile matter content increases (B) Carbon content decreases (C) Moisture content increases (D) Ash content increases
Last Answer : (A) Volatile matter content increases
Description : The advantages of firing pulverised coal in the furnace lies in the fact that, it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel consumption (D) All (A), (B) and (C)
Last Answer : (C) Accelerates the burning rate and economises on fuel consumption
Description : A coal containing high amount of volatile matter will have (A) Low ignition temperature (B) Very little ash content (C) High fusion point of its ash (D) Low adiabatic flame temperature
Last Answer : (A) Low ignition temperature
Description : Fat' coal means a coal having (A) Low calorific value (B) High volatile matter (C) Low ash content
Last Answer : (B) High volatile matter
Description : The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel combustion (D) All (A), (B) and (C)
Last Answer : (C) Accelerates the burning rate and economises on fuel combustion
Description : A coal with high ash content (A) Has higher calorific value (B) Is harder and stronger (C) Is not subjected to washing (D) Has low quantity of mineral matter
Last Answer : (B) Is harder and stronger
Description : Bright coal (A) Contains more than 90% durain (B) Contains more than 90% fussain (C) Contains mainly vitrain & clarain and is generally coking (D) Is non-coking
Last Answer : (C) Contains mainly vitrain & clarain and is generally coking
Description : Explain higher and lower calorific value of a coal having following composition by mass Carbon 81%,Hydrogen 7%, Oxygen 8%,Nitrogen 2.5%, sulphur 1.5% and remaining is ash
Last Answer : Carbon C = 81% = 0.81 Hydrogen = H2 = 7% = 0.07 Oxygen = O2 = 8% = 0.08 Nitrogen = N = 2.5% = 0.025 Sulphur = S =1.5% = 0.015 Ash = 2.5% = 0.025 Dulong's formula: H.C.V. of coal = 33800 C + 144500 ... = H.C.V.- 9H2 x 2442 KJ / Kg = 36187.5- 9 x 0.07 x 2442 L.C.V. of coal = 34649.04 KJ / Kg
Description : Coal tar fuels (CTF) as compared to petroleum based fuel oils have higher (A) Calorific value (B) Higher C/H ratio (C) Sulphur content (D) Difference in gross & net calorific value
Last Answer : (B) Higher C/H ratio
Description : Kopper-Totzek coal gasifier (A) Can give ammonia synthesis gas (H2 + N2 ) (B) Is a moving bed reactor (C) Cannot use coking coal (D) Operate at very high pressure
Last Answer : (A) Can give ammonia synthesis gas (H2 + N2 )
Description : Prime coking coal is always blended with medium or non- coking coal before carbonisation (A) To check against its excessive swelling during heating, which may exert high pressure and damage coke oven walls (B) Because, it alone produces unreactive coke (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) and (B)