Increase in ash content of blast furnace coke (A) Reduces its consumption in the furnace (B) Increases its consumption in the furnace (C) Does not affect its consumption in the furnace (D) Decreases its hardness and abrasion resistance

Increase in ash content of blast furnace coke
(A) Reduces its consumption in the furnace
(B) Increases its consumption in the furnace
(C) Does not affect its consumption in the furnace
(D) Decreases its hardness and abrasion resistance
by

1 Answer

Answer :

(B) Increases its consumption in the furnace
by

Related questions

High ash containing coke (A) Produces more slag when used in the blast(B) Has poor strength and abrasion resistance(C) Is desirable in producer gas manufacture(D) None of these furnace

Description : High ash containing coke (A) Produces more slag when used in the blast furnace (B) Has poor strength and abrasion resistance (C) Is desirable in producer gas manufacture (D) None of these

Last Answer : (A) Produces more slag when used in the blast furnace

Higher percentage of ash in coal meant for the production of metallurgical grade coke (A) Decreases the hardness of coke (B) Decreases the abrasion resistance of coke (C) Causes brittleness in steel (D) None of these

Description : Higher percentage of ash in coal meant for the production of metallurgical grade coke (A) Decreases the hardness of coke (B) Decreases the abrasion resistance of coke (C) Causes brittleness in steel (D) None of these

Last Answer : (D) None of these

Out of the following, which is the most important parameter for the blast furnace grade coke? (A) CSR & CRI (B) Ash content (C) Moisture content (D) Volatile matter content

Description : Out of the following, which is the most important parameter for the blast furnace grade coke? (A) CSR & CRI (B) Ash content (C) Moisture content (D) Volatile matter content

Last Answer : (A) CSR & CRI

Abrasion index of blast furnace coke should be around __________ percent. (A) 20 (B) 35 (C) 55 (D) 80

Description : Abrasion index of blast furnace coke should be around __________ percent. (A) 20 (B) 35 (C) 55 (D) 80

Last Answer : (D) 80

M10 index of coke indicates its (A) Compressive strength (B) Hardness (C) Abrasion resistance (D) Impact strength

Description : M10 index of coke indicates its (A) Compressive strength (B) Hardness (C) Abrasion resistance (D) Impact strength

Last Answer : Option C

M10 index of coke indicates its (A) Compressive strength (B) Hardness (C) Abrasion resistance (D) Impact strength Answer: Option C

Description : M10 index of coke indicates its (A) Compressive strength (B) Hardness (C) Abrasion resistance (D) Impact strength Answer: Option C

Last Answer : Option C

Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity

Description : Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity

Last Answer : Option A

A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Description : A good metallurgical coke should have very low (A) Sulphur & phosphorous content (B) Porosity (C) Fusion point of its ash (D) Hardness & strength

Last Answer : (A) Sulphur & phosphorous content

Pick out the wrong statement. (A) Cokes of high reactivity are obtained from weakly coking coals (B) Cokes of high reactivity are obtained from strongly coking coals (C) Reactivity of coke is inversely proportional to its absolute density (D) Abrasion index of the coke is a measure of its hardness

Description : Pick out the wrong statement. (A) Cokes of high reactivity are obtained from weakly coking coals (B) Cokes of high reactivity are obtained from strongly coking coals (C) Reactivity of coke is inversely proportional to its absolute density (D) Abrasion index of the coke is a measure of its hardness

Last Answer : (B) Cokes of high reactivity are obtained from strongly coking coals

The advantages of firing pulverised coal in the furnace lies in the fact that, it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel consumption (D) All (A), (B) and (C)

Description : The advantages of firing pulverised coal in the furnace lies in the fact that, it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel consumption (D) All (A), (B) and (C)

Last Answer : (C) Accelerates the burning rate and economises on fuel consumption

Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon gases carburise the surface of steel at annealing temperatures (C) Active nitrogen (formed by cracking ammonia at the metal surface) cause nitride formation with increase in surface hardness (D) None of these

Description : Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon ... the metal surface) cause nitride formation with increase in surface hardness (D) None of these

Last Answer : (D) None of these

Increasing the carbon content of steel (A) Reduces the upper shelf energy (B) Increasing the ductility transition temperature (C) Decreases brittleness (D) Decreases hardness

Description : Increasing the carbon content of steel (A) Reduces the upper shelf energy (B) Increasing the ductility transition temperature (C) Decreases brittleness (D) Decreases hardness

Last Answer : (B) Increasing the ductility transition temperature

Washing of coal (A) Reduces its sulphur and ash content (B) Controls its ash fusibility and increases its calorific value(C) Improves its coking properties(D) All (A), (B) and (C)

Description : Washing of coal (A) Reduces its sulphur and ash content (B) Controls its ash fusibility and increases its calorific value (C) Improves its coking properties (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Critical Air Blast (CAB) value of coke is a direct measure of its (A) Reactivity (B) Hardness (C) Strength (D) None of these

Description : Critical Air Blast (CAB) value of coke is a direct measure of its (A) Reactivity (B) Hardness (C) Strength (D) None of these

Last Answer : (A) Reactivity

Pick out the correct statement. (A) Oxygen content decreases from lignite to bituminous coal as the coalification increases (B) The less the oxygen content, better is the coal, as it reduces the calorific value (C) With increase in oxygen content, moisture holding capacity of coal increases and the caking power decreases (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) Oxygen content decreases from lignite to bituminous coal as the coalification increases (B) The less the oxygen content, better is the coal, as it reduces the calorific value (C ... capacity of coal increases and the caking power decreases (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In the blast furnace, incorporation of water vapour in the blast gives the following effect. (A) Increases the reducing potential of the gas (B) Increases the flame temperature (C) No significant change occurs (D) Increases the hydrogen content in the metal

Description : In the blast furnace, incorporation of water vapour in the blast gives the following effect. (A) Increases the reducing potential of the gas (B) Increases the flame temperature (C) No significant change occurs (D) Increases the hydrogen content in the metal

Last Answer : (A) Increases the reducing potential of the gas

With increase in the temperature of carbonisation of coal (A) Hydrogen content of coke oven gas increases due to cracking ofhydrocarbons(B) Methane content in the coke oven gas decreases and carbon monoxidecontent increases(C) Calorific value of the coke oven gas decreases due to cracking ofhydrocarbons which is not compensated by increase in CO & H2 content(D) All (A), (B) and (C)

Description : With increase in the temperature of carbonisation of coal (A) Hydrogen content of coke oven gas increases due to cracking ofhydrocarbons (B) Methane content in the coke oven gas decreases and carbon monoxide content increases ( ... compensated by increase in CO & H2 content (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Nylon-6 as compared to nylon 66 has lower (A) Abrasion resistance (B) Thermal stability (C) Adhesion to rubber (D) Hardness

Description : Nylon-6 as compared to nylon 66 has lower (A) Abrasion resistance (B) Thermal stability (C) Adhesion to rubber (D) Hardness

Last Answer : (A) Abrasion resistance

Nylon-6 as compared to Nylon-66 is having higher (A) Hardness (B) Abrasion/resistance (C) Melting point (D) None of these

Description : Nylon-6 as compared to Nylon-66 is having higher (A) Hardness (B) Abrasion/resistance (C) Melting point (D) None of these

Last Answer : (D) None of these

Non-ferrous alloys used for making cutting tools need not have high (A) Abrasion resistance (B) Toughness (C) Red hardness (D) Cutting speed

Description : Non-ferrous alloys used for making cutting tools need not have high (A) Abrasion resistance (B) Toughness (C) Red hardness (D) Cutting speed

Last Answer : (C) Red hardness

Washing of coal (A) Reduces its ash & sulphur content (B) Improves its coking properties (C) Increase the fusion point of its ash by removing chlorine compounds (D) All (A), (B) and (C)

Description : Washing of coal (A) Reduces its ash & sulphur content (B) Improves its coking properties (C) Increase the fusion point of its ash by removing chlorine compounds (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

With increase in the carbon percentage in the steel, its (A) Hardness increases (B) Ductility reduces (C) Tensile strength increases (D) All (A), (B) and (C)

Description : With increase in the carbon percentage in the steel, its (A) Hardness increases (B) Ductility reduces (C) Tensile strength increases (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) Percentage of ash in coke produced from medium coking coal is more than that in coal (B) The calorific value (kcal/Nm3 ) of coke oven gas reduces on removal of hydrogen from it by cryogenic method (C) Ash is normally removed as 'fly-ash' in Kopper-Totzek process of coal gasification (D) Coal based fertiliser plants in India at Talcher (Orissa) and Ramagundam (A.P) employ Kopper-Totzek process of coal gasification

Description : Pick out the wrong statement. (A) Percentage of ash in coke produced from medium coking coal is more than that in coal (B) The calorific value (kcal/Nm3 ) of coke oven gas reduces on ... plants in India at Talcher (Orissa) and Ramagundam (A.P) employ Kopper-Totzek process of coal gasification

Last Answer : (C) Ash is normally removed as 'fly-ash' in Kopper-Totzek process of coal gasification

Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature (C) Heat release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Description : Coke oven gas is a better fuel than blast furnace gas, because of its higher (A) Calorific value, cleanliness and relatively low distribution cost (due to its low specific gravity) (B) Adiabatic flame temperature ... release rate (thus requiring smaller combustion chamber) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore

Description : Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore

Last Answer : (C) Manufacture of carbon electrode

Coke ovens in steel plant are heated by (A) Electricity (B) Blast furnace gas/mixed gas (C) Coke oven gas (D) Both (B) and (C)

Description : Coke ovens in steel plant are heated by (A) Electricity (B) Blast furnace gas/mixed gas (C) Coke oven gas (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Regenerators are used for waste heat recovery in (A) By-product coke ovens (B) Beehive coke oven (C) Blast furnace stoves (D) Soaking pits

Description : Regenerators are used for waste heat recovery in (A) By-product coke ovens (B) Beehive coke oven (C) Blast furnace stoves (D) Soaking pits

Last Answer : (A) By-product coke ovens

Fuel used in B.F. stove is (A) Pulverised coal (B) Furnace oil (C) Blast furnace gas/mixed gas (D) Coke oven gas

Description : Fuel used in B.F. stove is (A) Pulverised coal (B) Furnace oil (C) Blast furnace gas/mixed gas (D) Coke oven gas

Last Answer : (C) Blast furnace gas/mixed gas

Which furnace employs an I.D. fan for the removal of flue gases from the furnace? (A) Coke oven(B) Blast furnace stoves(C) Beehive coke oven(D) High pressure boiler

Description : Which furnace employs an I.D. fan for the removal of flue gases from the furnace? (A) Coke oven (B) Blast furnace stoves (C) Beehive coke oven (D) High pressure boiler

Last Answer : (D) High pressure boiler

. An example of a periodic furnace is the (A) Blast furnace stoves (B) Blast furnace (C) Coke oven heating chamber (D) Rotary kilns

Description : . An example of a periodic furnace is the (A) Blast furnace stoves (B) Blast furnace (C) Coke oven heating chamber (D) Rotary kilns

Last Answer : (A) Blast furnace stoves

Size of blast furnace grade coke is __________ mm. (A) 25-80 (B) 0-15 (C) 15-25 (D) > 100

Description : Size of blast furnace grade coke is __________ mm. (A) 25-80 (B) 0-15 (C) 15-25 (D) > 100

Last Answer : (A) 25-80

Which of the following is not a by-product fuel? (A) Producer gas (B) Blast furnace gas (C) Coke oven gas (D) Refinery gas

Description : Which of the following is not a by-product fuel? (A) Producer gas (B) Blast furnace gas (C) Coke oven gas (D) Refinery gas

Last Answer : (A) Producer gas

Which of the following has the least calorific value (kcal/Nm3 )? (A) Blast furnace gas (B) Coke oven gas (C) Sewage gas (D) Natural gas

Description : Which of the following has the least calorific value (kcal/Nm3 )? (A) Blast furnace gas (B) Coke oven gas (C) Sewage gas (D) Natural gas

Last Answer : (A) Blast furnace gas

Which of the following is the most reactive (as regards the formation of CO + H2 from C + H2O)? (A) Blast furnace coke (B) Low temperature coke (C) Anthracite coal (D) Sub-bituminous coa

Description : Which of the following is the most reactive (as regards the formation of CO + H2 from C + H2O)? (A) Blast furnace coke (B) Low temperature coke (C) Anthracite coal (D) Sub-bituminous coa

Last Answer : (B) Low temperature coke

Gross & net calorific value is the same for (A) Blast furnace gas (B) Coke oven gas (C) L.D. converter gas (D) None of these

Description : Gross & net calorific value is the same for (A) Blast furnace gas (B) Coke oven gas (C) L.D. converter gas (D) None of these

Last Answer : (C) L.D. converter gas

Mixed gas' used in steel plants is a mixture of (A) B.F. gas and coke oven gas (B) Coke oven gas and converter gas (C) Coke oven gas and L.P.G (D) Blast furnace gas and naphtha vapor

Description : Mixed gas' used in steel plants is a mixture of (A) B.F. gas and coke oven gas (B) Coke oven gas and converter gas (C) Coke oven gas and L.P.G (D) Blast furnace gas and naphtha vapor

Last Answer : (A) B.F. gas and coke oven gas

Which of the following is the most poisonous gas? (A) Coke oven gas(B) Producer gas(C) Blast furnace gas(D) L.D. converter gas

Description : Which of the following is the most poisonous gas? (A) Coke oven gas (B) Producer gas (C) Blast furnace gas (D) L.D. converter gas

Last Answer : (D) L.D. converter gas

Coke oven gas compared to blast furnace gas is (A) More explosive and inflammable (B) Less poisonous (C) Lighter (D) All (A), (B) and (C)

Description : Coke oven gas compared to blast furnace gas is (A) More explosive and inflammable (B) Less poisonous (C) Lighter (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following fuel gases is heavier than air? (A) Blast furnace gas (B) Coke oven gas (C) Natural gas (D) Water gas

Description : Which of the following fuel gases is heavier than air? (A) Blast furnace gas (B) Coke oven gas (C) Natural gas (D) Water gas

Last Answer : (A) Blast furnace gas

Which of the following has the highest theoretical flame temperature? (A) Blast furnace gas (B) Hydrogen (C) Acetylene (D) Coke oven gas

Description : Which of the following has the highest theoretical flame temperature? (A) Blast furnace gas (B) Hydrogen (C) Acetylene (D) Coke oven gas

Last Answer : (C) Acetylene

Out of the following fuels, the difference between gross and net calorific value will be minimum in case of (A) Coke oven gas (B) Water gas (C) Natural gas (D) Blast furnace gas

Description : Out of the following fuels, the difference between gross and net calorific value will be minimum in case of (A) Coke oven gas (B) Water gas (C) Natural gas (D) Blast furnace gas

Last Answer : (D) Blast furnace gas

Which of the following has the highest gross calorific value? (A) Blast furnace gas (B) Coke oven gas (C) Carburetted water gas (D) Oil refinery gas

Description : Which of the following has the highest gross calorific value? (A) Blast furnace gas (B) Coke oven gas (C) Carburetted water gas (D) Oil refinery gas

Last Answer : (D) Oil refinery gas

Blast furnace coke is made from coal by (A) Low temperature carbonisation (B) High temperature carbonisation (C) Medium temperature carbonisation (D) Heating the coal in an oven in presence of air

Description : Blast furnace coke is made from coal by (A) Low temperature carbonisation (B) High temperature carbonisation (C) Medium temperature carbonisation (D) Heating the coal in an oven in presence of air

Last Answer : (B) High temperature carbonisation

Which is the heaviest fuel gas out of the following? (A) Blast furnace gas (B) Coke oven gas (C) Water gas (D) Carburetted water gas

Description : Which is the heaviest fuel gas out of the following? (A) Blast furnace gas (B) Coke oven gas (C) Water gas (D) Carburetted water gas

Last Answer : (A) Blast furnace gas

The calorific value is the highest out of the following for (A) Producer gas (B) Water gas (C) Coke oven gas (D) Blast furnace gas

Description : The calorific value is the highest out of the following for (A) Producer gas (B) Water gas (C) Coke oven gas (D) Blast furnace gas

Last Answer : (C) Coke oven gas

Which of the following is a poisonous fuel gas? (A) Coke oven gas (B) Blast furnace gas (C) Natural gas (D) None of these

Description : Which of the following is a poisonous fuel gas? (A) Coke oven gas (B) Blast furnace gas (C) Natural gas (D) None of these

Last Answer : (B) Blast furnace gas

Blast furnace gas compared to coke oven gas has (A) Lower ignition temperature (B) Narrower limit of inflammability (C) Higher calorific value (D) Lower theoretical flame temperature

Description : Blast furnace gas compared to coke oven gas has (A) Lower ignition temperature (B) Narrower limit of inflammability (C) Higher calorific value (D) Lower theoretical flame temperature

Last Answer : (D) Lower theoretical flame temperature

Which of the following is a primary fuel? (A) Blast furnace coke (B) Gasoline (C) Natural gas (D) Wood charcoal

Description : Which of the following is a primary fuel? (A) Blast furnace coke (B) Gasoline (C) Natural gas (D) Wood charcoal

Last Answer : (C) Natural gas

Coke oven gas after passing through return electrostatic tar precipitator (RETP) is used for the (A) Hot scarfing of steel slabs (B) Mixing with blast furnace gas (C) Coke oven battery heating (D) Steel ladle drying

Description : Coke oven gas after passing through return electrostatic tar precipitator (RETP) is used for the (A) Hot scarfing of steel slabs (B) Mixing with blast furnace gas (C) Coke oven battery heating (D) Steel ladle drying

Last Answer : (C) Coke oven battery heating

Main use of soft coke is as __________ fuel. (A) Domestic (B) Blast furnace (C) Foundry (D) None of these

Description : Main use of soft coke is as __________ fuel. (A) Domestic (B) Blast furnace (C) Foundry (D) None of these

Last Answer : (A) Domestic