When you ping theloopback address,a packet is sent where? A. On the network B. Down through thelayers of the IP architecture and then up thelayers again C. Across the wire D. through the loopback dongle E. None of the above

When you ping theloopback address,a packet is sent where?
A.
On the network
B.
Down through thelayers of the IP architecture and then up thelayers again
C.
Across the wire
D.
through the loopback dongle
E.
None of the above
by

1 Answer

Answer :

Down through thelayers of the IP architecture and then up thelayers again
by

Related questions

If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : the IP address of therouter found inthe routing table

Which of the following statement is true? I. An address with all bits 1 is interpreted as all networks or all hosts. II. The class A network 128.0.0.0 is defined as the loopback network. a. i only b. ii onlyc. Both A and B d. None of the above

Description : Which of the following statement is true? I. An address with all bits 1 is interpreted as all networks or all hosts. II. The class A network 128.0.0.0 is defined as the loopback network. a. i only b. ii only c. Both A and B d. None of the above

Last Answer : a. i only

Which address is the loopback address? A. 0.0.0.1 B. 127.0.0.0 C. 127.0.0.1 D. 255.255.255.255 E. None of the above

Description : Which address is the loopback address? A. 0.0.0.1 B. 127.0.0.0 C. 127.0.0.1 D. 255.255.255.255 E. None of the above

Last Answer : 255.255.255.255

f the sender is a host and wants tosend a packet toanotherhost on the samenetwork, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : f the sender is a host and wants tosend a packet toanotherhost on the samenetwork, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : hedestination IP address in the datagram header

What is the loopback address of localhost? A. 0.0.0.0 B. 127.0.0.1 C. 172.16.12.1 D. 255.0.0.0

Description : What is the loopback address of localhost? A. 0.0.0.0 B. 127.0.0.1 C. 172.16.12.1 D. 255.0.0.0

Last Answer : C. 172.16.12.1

In _______delivery, both thedeliverer of the IP packet and the destination are on the same network. A) aconnectionless B) a direct C) an indirect D) none of the above

Description : In _______delivery, both thedeliverer of the IP packet and the destination are on the same network. A) aconnectionless B) a direct C) an indirect D) none of the above

Last Answer : a direct

Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same destination can take different routes in the network c. IP ensures that a packet is discarded if it is unable to reach its destination within a given number of hops d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

Description : Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same ... outgoing packets; the route is determined only by the routing tables in the routers on the way

Last Answer : d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

A packet whose destination is outside the local TCP/IP network segment is sent to .............. (1) File server (2) DNS server (3) DHCP server (4) Default gateway

Description : A packet whose destination is outside the local TCP/IP network segment is sent to .............. (1) File server (2) DNS server (3) DHCP server (4) Default gateway

Last Answer : Answer: 4 

In a classful addressing, the IP addresses with 0 (zero) as network number: (A) refers to the current network (B) refers to broadcast on the local network (C) refers to broadcast on a distant network (D) refers to loopback testing

Description : In a classful addressing, the IP addresses with 0 (zero) as network number: (A) refers to the current network (B) refers to broadcast on the local network (C) refers to broadcast on a distant network (D) refers to loopback testing

Last Answer : (A) refers to the current network

In the TCP/IP protocol architecture, the Network Access Layer includes ………………………………...layers of the OSI Reference Model. A. presentation, session, applicationB. physical, data link, network C. data link, network D. physical, data link

Description : In the TCP/IP protocol architecture, the Network Access Layer includes ………………………………...layers of the OSI Reference Model. A. presentation, session, application B. physical, data link, network C. data link, network D. physical, data link

Last Answer : B. physical, data link, network

A _________ network is across between a circuit-switchednetworkand a datagram network. It has some characteristics ofboth. A) virtual-circuit B) packet-switched C) frame-switched D) none of the above

Description : A _________ network is across between a circuit-switchednetworkand a datagram network. It has some characteristics ofboth. A) virtual-circuit B) packet-switched C) frame-switched D) none of the above

Last Answer : virtual-circui

The _______ address in theheader ofa packet in adatagram network normally remains thesame during the entire journeyof the packet. A) source B) destination C) local D) none of the above

Description : The _______ address in theheader ofa packet in adatagram network normally remains thesame during the entire journeyof the packet. A) source B) destination C) local D) none of the above

Last Answer : destination

In virtual circuit network each packet contains ___________ a. full source and destination address b. a short VC number c. only source address d. only destination address

Description : In virtual circuit network each packet contains ___________ a. full source and destination address b. a short VC number c. only source address d. only destination address

Last Answer : b. a short VC number

In virtual circuit network each packet contains ___________ A. full source and destination address B. a short VC number C. only source address D. only destination address

Description : In virtual circuit network each packet contains ___________ A. full source and destination address B. a short VC number C. only source address D. only destination address

Last Answer : B. a short VC number

Which command is used to test network connectivity and provide a response to each packet received by the remote host? a.test b.tracer c.ping d.connect

Description : Which command is used to test network connectivity and provide a response to each packet received by the remote host? a.test b.tracer c.ping d.connect

Last Answer : c.ping

The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) ... v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : B) i, iii, iv and v only

The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The following protocols and system are commonly used to provide various degrees of security services in computer network. i) IP filtering ii) Reverse Address Translation iii) IP security Architecture (IPsec) iv) Firewalls v) Socks ... only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : B) i, iii, iv and v only

Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or all hosts. ii) The class A network 128.0.0.0 is defined as the loopback network. A) i only B) ii only C) Both A and B D) None of the above

Description : Which of the following statement is true? i) An address with all bits 1 is interpreted as all networks or all hosts. ii) The class A network 128.0.0.0 is defined as the loopback network. A) i only B) ii only C) Both A and B D) None of the above

Last Answer : A) i only

address use 7 bits for the <network> and 24 bits for the <host> portion of the IP a. address. b. Class A c. Class B d. Class C e. Class D

Description : address use 7 bits for the and 24 bits for the portion of the IP a. address. b. Class A c. Class B d. Class C e. Class D

Last Answer : a. address.

The program used to determine the round trip delay between a workstation and a destination address is a. Tracert b. Traceroute c. Ping d. Pop

Description : The program used to determine the round trip delay between a workstation and a destination address is a. Tracert b. Traceroute c. Ping d. Pop

Last Answer : b. Traceroute

The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram ... IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : thedestination IP address in the datagram header

In _______forwarding, the full IP address of a destination isgiven in the routing table. A) next-hop B) network-specific C) host-specific D) default

Description : In _______forwarding, the full IP address of a destination isgiven in the routing table. A) next-hop B) network-specific C) host-specific D) default

Last Answer : host-specific

In the network 200.10.11.144/27, the fourth octet (in decimal) of the last IP address of the network which can be assigned to a host is ________ a. 158 b. 255 c. 222 d. 223

Description : In the network 200.10.11.144/27, the fourth octet (in decimal) of the last IP address of the network which can be assigned to a host is ________ a. 158 b. 255 c. 222 d. 223

Last Answer : a. 158

A 4 byte IP address consists of __________ a. only network address b. only host address c. network address & host address d. network address & MAC address

Description : A 4 byte IP address consists of __________ a. only network address b. only host address c. network address & host address d. network address & MAC address

Last Answer : c. network address & host address

Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? a. ARQ (Automatic Repeat Request) b. ARP (Address Resolution Protocol) c. SLIP (Serial Line Internet Protocol) d. PLIP (Parallel Line Internet Protocol)

Description : Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? a. ARQ (Automatic Repeat Request) b. ARP (Address Resolution Protocol) c. SLIP (Serial Line Internet Protocol) d. PLIP (Parallel Line Internet Protocol)

Last Answer : b. ARP (Address Resolution Protocol)

…………………………………. converts a physical network address into an IP address. A. ARP B. RARP C. DNS D. DHCP

Description : …………………………………. converts a physical network address into an IP address. A. ARP B. RARP C. DNS D. DHCP

Last Answer : B. RARP

One 4 byte IP address is subdivided into __________ A. only network address B. only host address C. network address & host address D. network address & MAC address

Description : One 4 byte IP address is subdivided into __________ A. only network address B. only host address C. network address & host address D. network address & MAC address

Last Answer : C. network address & host address

Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? A. ARQ Automatic Repeat Request B. ARP Address Resolution Protocol C. SLIP Serial Line Internet Protocol D. PLIP Parallel Line Internet Protocol

Description : Which is the protocol that maps varying IP addresses to the Physical MAC Address of a machine in a LAN network? A. ARQ Automatic Repeat Request B. ARP Address Resolution Protocol C. SLIP Serial Line Internet Protocol D. PLIP Parallel Line Internet Protocol

Last Answer : B. ARP Address Resolution Protocol

Why can't I access (ping) my public IP from within my private network?

Description : Why can't I access (ping) my public IP from within my private network?

Last Answer : hold windows key+r then type cmd press enter Then type ipconfig it should show up. Or are you wondering how to change it?

The IP packet that carries an IGMP packet has a value of _______ in its protocol field. A) 3 B) 2 C) 1 D) noneof the above

Description : The IP packet that carries an IGMP packet has a value of _______ in its protocol field. A) 3 B) 2 C) 1 D) noneof the above

Last Answer : 2

An IGMP packet is carried in an __________ packet. A) UDP B) IP C) Ethernet frame D) noneof the above

Description : An IGMP packet is carried in an __________ packet. A) UDP B) IP C) Ethernet frame D) noneof the above

Last Answer : IP

An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes. The number of fragments that the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Description : An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes ... the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Last Answer : d. 13

Which of the following statements is TRUE? a. Both Ethernet frame and IP packet include checksum fields b. Ethernet frame includes a checksum field and IP packet includes a CRC field c. Ethernet frame includes a CRC field and IP packet includes a checksum field d. Both Ethernet frame and IP packet include CRC fields

Description : Which of the following statements is TRUE? a. Both Ethernet frame and IP packet include checksum fields b. Ethernet frame includes a checksum field and IP packet includes a CRC field c. Ethernet ... and IP packet includes a checksum field d. Both Ethernet frame and IP packet include CRC fields

Last Answer : Ethernet frame includes a CRC field and IP packet includes a checksum field

For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. Discard packets that reach later than that time c. Prevent packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Description : For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. ... packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Last Answer : c. Prevent packets from looping indefinitely

The …………………... command can set or display the configuration values for a network interface. A. ping B. traceroute C. ifconfig D. finger

Description : The …………………... command can set or display the configuration values for a network interface. A. ping B. traceroute C. ifconfig D. finger

Last Answer : C. ifconfig

Draw the Internet architecture [TCP/IP architecture] and explain the functionalities of each layer in detail.

Description : Draw the Internet architecture [TCP/IP architecture] and explain the functionalities of each layer in detail.

Last Answer : ∙ NET1, NET2, and so on. combination of hardware (e.g., a network adaptor) and software(e.g., a network device driver). Ethernet or Fiber Distributed Data Interface (FDDI) ... ), and SMTP (Simple Mail Transfer Protocol, or electronic mail), enable interoperation of popular applications.

Which of the following devices takes data sent from one network device and forwards it to the destination node based on MAC address ? a. Hub b. Modem c. Switch d. Gateway

Description : Which of the following devices takes data sent from one network device and forwards it to the destination node based on MAC address ? a. Hub b. Modem c. Switch d. Gateway

Last Answer : c. Switch

______ is a static algorithm in which every incoming packet is sent out on every outgoing line except the one it arrives on. This method usually generates vast number of duplicate packets.. A. Flooding B. Wait and watch C. congestion D. both a and c

Description : ______ is a static algorithm in which every incoming packet is sent out on every outgoing line except the one it arrives on. This method usually generates vast number of duplicate packets.. A. Flooding B. Wait and watch C. congestion D. both a and c

Last Answer : A. Flooding

The packet sent by a node to the source to inform it of congestion is called _______ A. Explicit B. Discard C. Choke D. Backpressure

Description : The packet sent by a node to the source to inform it of congestion is called _______ A. Explicit B. Discard C. Choke D. Backpressure

Last Answer : C. Choke

In datagram subnet new route is chosen ………………… (A) for every packet sent (B) for first and last packet sent (C) only for the first packet (D) for the packet which is not transmitted

Description : In datagram subnet new route is chosen ………………… (A) for every packet sent (B) for first and last packet sent (C) only for the first packet (D) for the packet which is not transmitted

Last Answer : (A) for every packet sent

A packet filtering firewall can a. deny certain users from accessing a service b. block worms and viruses from entering the network c. disallow some files from being accessed through FTP d. block some hosts from accessing the network

Description : A packet filtering firewall can a. deny certain users from accessing a service b. block worms and viruses from entering the network c. disallow some files from being accessed through FTP d. block some hosts from accessing the network

Last Answer : d. block some hosts from accessing the network

In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a.Application layer b.Transport layer c.Link layer d.Session layer

Description : In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a.Application layer b.Transport layer c.Link layer d.Session layer

Last Answer : a.Application layer

.In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a. Application layer b. Transport layer c. Link layer d. Session layer

Description : .In TCP IP Model, when data is sent from device A to device B, the 5th layer to receive data at B is ____________ a. Application layer b. Transport layer c. Link layer d. Session layer

Last Answer : a. Application layer

Which of the following use routes with packet filtering rules to allow or deny access based on source address, destination address, or port number? 1) Application layer Firewall 2) Packet Filtering Firewall 3) Router enhanced firewall 4) IP enabled firewall

Description : Which of the following use routes with packet filtering rules to allow or deny access based on source address, destination address, or port number? 1) Application layer Firewall 2) Packet Filtering Firewall 3) Router enhanced firewall 4) IP enabled firewall

Last Answer : 2) Packet Filtering Firewall

Which of the following use routes with packet filtering rules to allow or deny access based on source address, destination address, or port number? 1 Application layer Firewall 2 Packet Filtering Firewall 3 Router enhanced firewall 4 IP enabled firewall

Description : Which of the following use routes with packet filtering rules to allow or deny access based on source address, destination address, or port number? 1 Application layer Firewall 2 Packet Filtering Firewall 3 Router enhanced firewall 4 IP enabled firewall

Last Answer : 2 Packet Filtering Firewall

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, ... iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii ... and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

Loopback address ....................... of IPv6 address is equivalent to the IPV4 loopback address 127.0.0.1. A) (: : 1) B) (: : ) C) (: : 0) D) (1 : : )

Description : Loopback address ....................... of IPv6 address is equivalent to the IPV4 loopback address 127.0.0.1. A) (: : 1) B) (: : ) C) (: : 0) D) (1 : : )

Last Answer : A) (: : 1)